// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * NXP LX2160ARDB device tree source
 *
 * Author:	Priyanka Jain <priyanka.jain@nxp.com>
 *		Sriram Dash <sriram.dash@nxp.com>
 *
 * Copyright 2018 NXP
 *
 */

/dts-v1/;

#include "fsl-lx2160a.dtsi"

/ {
	model = "NXP Layerscape LX2160ARDB Board";
	compatible = "fsl,lx2160ardb", "fsl,lx2160a";
	aliases {
		spi0 = &fspi;
	};
};

&dpmac3 {
	status = "okay";
	phy-handle = <&aquantia_phy1>;
	phy-connection-type = "usxgmii";
};

&dpmac4 {
	status = "okay";
	phy-handle = <&aquantia_phy2>;
	phy-connection-type = "usxgmii";
};

&dpmac17 {
	status = "okay";
	phy-handle = <&rgmii_phy1>;
	phy-connection-type = "rgmii-id";
};

&dpmac18 {
	status = "okay";
	phy-handle = <&rgmii_phy2>;
	phy-connection-type = "rgmii-id";
};

&emdio1 {
	status = "okay";
	rgmii_phy1: ethernet-phy@1 {
		/* AR8035 PHY - "compatible" property not strictly needed */
		compatible = "ethernet-phy-id004d.d072";
		reg = <0x1>;
		/* Poll mode - no "interrupts" property defined */
	};
	rgmii_phy2: ethernet-phy@2 {
		/* AR8035 PHY - "compatible" property not strictly needed */
		compatible = "ethernet-phy-id004d.d072";
		reg = <0x2>;
		/* Poll mode - no "interrupts" property defined */
	};
	aquantia_phy1: ethernet-phy@4 {
		/* AQR107 PHY - "compatible" property not strictly needed */
		compatible = "ethernet-phy-ieee802.3-c45";
		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
		reg = <0x4>;
	};
	aquantia_phy2: ethernet-phy@5 {
		/* AQR107 PHY - "compatible" property not strictly needed */
		compatible = "ethernet-phy-ieee802.3-c45";
		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
		reg = <0x5>;
	};
};

&esdhc0 {
	status = "okay";
};

&esdhc1 {
	status = "okay";
	mmc-hs200-1_8v;
	mmc-hs400-1_8v;
	bus-width = <8>;
};

&fspi {
	status = "okay";

	mt35xu512aba0: flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <50000000>;
		reg = <0>;
		spi-rx-bus-width = <8>;
		spi-tx-bus-width = <1>;
	};

	mt35xu512aba1: flash@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <50000000>;
		reg = <1>;
		spi-rx-bus-width = <8>;
		spi-tx-bus-width = <1>;
	};
};

&i2c0 {
	status = "okay";
	bootph-all;
};

&i2c4 {
	status = "okay";

	rtc@51 {
		compatible = "nxp,pcf2129";
		reg = <0x51>;
	};
};

&sata0 {
	status = "okay";
};

&sata1 {
	status = "okay";
};

&sata2 {
	status = "okay";
};

&sata3 {
	status = "okay";
};