sf: Fix to compute proper sector_size
Upto now flash sector_size is assigned from params which isn't
necessarily a sector size from vendor, so based on the SECT_*
flags from flash_params the erase_size will compute and it will
become the sector_size finally.
Bug report (from Bin Meng):
=> sf probe
SF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB,
total 2 MiB, mapped at ffe00000
=> sf erase 0 +100
SF: 65536 bytes @ 0x0 Erased: OK
Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Reported-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index bd834dc..4158e13 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -119,7 +119,8 @@
* @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
* @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
* @ext_jedec: Device ext_jedec ID
- * @sector_size: Sector size of this device
+ * @sector_size: Isn't necessarily a sector size from vendor,
+ * the size listed here is what works with CMD_ERASE_64K
* @nr_sectors: No.of sectors on this device
* @e_rd_cmd: Enum list for read commands
* @flags: Important param, for flash specific behaviour
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index d8b9fca..201471c 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -187,6 +187,9 @@
flash->erase_size = flash->sector_size;
}
+ /* Now erase size becomes valid sector size */
+ flash->sector_size = flash->erase_size;
+
/* Look for the fastest read cmd */
cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx);
if (cmd) {