diff --git a/include/linux/zstd_lib.h b/include/linux/zstd_lib.h
new file mode 100644
index 0000000..25f5907
--- /dev/null
+++ b/include/linux/zstd_lib.h
@@ -0,0 +1,2549 @@
+/*
+ * Copyright (c) Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_H_235446
+#define ZSTD_H_235446
+
+/* ======   Dependency   ======*/
+#include <linux/types.h>   /* size_t */
+
+
+/* =====   ZSTDLIB_API : control library symbols visibility   ===== */
+#ifndef ZSTDLIB_VISIBLE
+#  if (__GNUC__ >= 4) && !defined(__MINGW32__)
+#    define ZSTDLIB_VISIBLE __attribute__ ((visibility ("default")))
+#    define ZSTDLIB_HIDDEN __attribute__ ((visibility ("hidden")))
+#  else
+#    define ZSTDLIB_VISIBLE
+#    define ZSTDLIB_HIDDEN
+#  endif
+#endif
+#define ZSTDLIB_API ZSTDLIB_VISIBLE
+
+
+/* *****************************************************************************
+  Introduction
+
+  zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
+  real-time compression scenarios at zlib-level and better compression ratios.
+  The zstd compression library provides in-memory compression and decompression
+  functions.
+
+  The library supports regular compression levels from 1 up to ZSTD_maxCLevel(),
+  which is currently 22. Levels >= 20, labeled `--ultra`, should be used with
+  caution, as they require more memory. The library also offers negative
+  compression levels, which extend the range of speed vs. ratio preferences.
+  The lower the level, the faster the speed (at the cost of compression).
+
+  Compression can be done in:
+    - a single step (described as Simple API)
+    - a single step, reusing a context (described as Explicit context)
+    - unbounded multiple steps (described as Streaming compression)
+
+  The compression ratio achievable on small data can be highly improved using
+  a dictionary. Dictionary compression can be performed in:
+    - a single step (described as Simple dictionary API)
+    - a single step, reusing a dictionary (described as Bulk-processing
+      dictionary API)
+
+  Advanced experimental functions can be accessed using
+  `#define ZSTD_STATIC_LINKING_ONLY` before including zstd.h.
+
+  Advanced experimental APIs should never be used with a dynamically-linked
+  library. They are not "stable"; their definitions or signatures may change in
+  the future. Only static linking is allowed.
+*******************************************************************************/
+
+/*------   Version   ------*/
+#define ZSTD_VERSION_MAJOR    1
+#define ZSTD_VERSION_MINOR    5
+#define ZSTD_VERSION_RELEASE  2
+#define ZSTD_VERSION_NUMBER  (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE)
+
+/*! ZSTD_versionNumber() :
+ *  Return runtime library version, the value is (MAJOR*100*100 + MINOR*100 + RELEASE). */
+ZSTDLIB_API unsigned ZSTD_versionNumber(void);
+
+#define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE
+#define ZSTD_QUOTE(str) #str
+#define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str)
+#define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION)
+
+/*! ZSTD_versionString() :
+ *  Return runtime library version, like "1.4.5". Requires v1.3.0+. */
+ZSTDLIB_API const char* ZSTD_versionString(void);
+
+/* *************************************
+ *  Default constant
+ ***************************************/
+#ifndef ZSTD_CLEVEL_DEFAULT
+#  define ZSTD_CLEVEL_DEFAULT 3
+#endif
+
+/* *************************************
+ *  Constants
+ ***************************************/
+
+/* All magic numbers are supposed read/written to/from files/memory using little-endian convention */
+#define ZSTD_MAGICNUMBER            0xFD2FB528    /* valid since v0.8.0 */
+#define ZSTD_MAGIC_DICTIONARY       0xEC30A437    /* valid since v0.7.0 */
+#define ZSTD_MAGIC_SKIPPABLE_START  0x184D2A50    /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */
+#define ZSTD_MAGIC_SKIPPABLE_MASK   0xFFFFFFF0
+
+#define ZSTD_BLOCKSIZELOG_MAX  17
+#define ZSTD_BLOCKSIZE_MAX     (1<<ZSTD_BLOCKSIZELOG_MAX)
+
+
+/* *************************************
+*  Simple API
+***************************************/
+/*! ZSTD_compress() :
+ *  Compresses `src` content as a single zstd compressed frame into already allocated `dst`.
+ *  Hint : compression runs faster if `dstCapacity` >=  `ZSTD_compressBound(srcSize)`.
+ *  @return : compressed size written into `dst` (<= `dstCapacity),
+ *            or an error code if it fails (which can be tested using ZSTD_isError()). */
+ZSTDLIB_API size_t ZSTD_compress( void* dst, size_t dstCapacity,
+                            const void* src, size_t srcSize,
+                                  int compressionLevel);
+
+/*! ZSTD_decompress() :
+ *  `compressedSize` : must be the _exact_ size of some number of compressed and/or skippable frames.
+ *  `dstCapacity` is an upper bound of originalSize to regenerate.
+ *  If user cannot imply a maximum upper bound, it's better to use streaming mode to decompress data.
+ *  @return : the number of bytes decompressed into `dst` (<= `dstCapacity`),
+ *            or an errorCode if it fails (which can be tested using ZSTD_isError()). */
+ZSTDLIB_API size_t ZSTD_decompress( void* dst, size_t dstCapacity,
+                              const void* src, size_t compressedSize);
+
+/*! ZSTD_getFrameContentSize() : requires v1.3.0+
+ *  `src` should point to the start of a ZSTD encoded frame.
+ *  `srcSize` must be at least as large as the frame header.
+ *            hint : any size >= `ZSTD_frameHeaderSize_max` is large enough.
+ *  @return : - decompressed size of `src` frame content, if known
+ *            - ZSTD_CONTENTSIZE_UNKNOWN if the size cannot be determined
+ *            - ZSTD_CONTENTSIZE_ERROR if an error occurred (e.g. invalid magic number, srcSize too small)
+ *   note 1 : a 0 return value means the frame is valid but "empty".
+ *   note 2 : decompressed size is an optional field, it may not be present, typically in streaming mode.
+ *            When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *            Optionally, application can rely on some implicit limit,
+ *            as ZSTD_decompress() only needs an upper bound of decompressed size.
+ *            (For example, data could be necessarily cut into blocks <= 16 KB).
+ *   note 3 : decompressed size is always present when compression is completed using single-pass functions,
+ *            such as ZSTD_compress(), ZSTD_compressCCtx() ZSTD_compress_usingDict() or ZSTD_compress_usingCDict().
+ *   note 4 : decompressed size can be very large (64-bits value),
+ *            potentially larger than what local system can handle as a single memory segment.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *   note 5 : If source is untrusted, decompressed size could be wrong or intentionally modified.
+ *            Always ensure return value fits within application's authorized limits.
+ *            Each application can set its own limits.
+ *   note 6 : This function replaces ZSTD_getDecompressedSize() */
+#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1)
+#define ZSTD_CONTENTSIZE_ERROR   (0ULL - 2)
+ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize);
+
+/*! ZSTD_getDecompressedSize() :
+ *  NOTE: This function is now obsolete, in favor of ZSTD_getFrameContentSize().
+ *  Both functions work the same way, but ZSTD_getDecompressedSize() blends
+ *  "empty", "unknown" and "error" results to the same return value (0),
+ *  while ZSTD_getFrameContentSize() gives them separate return values.
+ * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */
+ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize);
+
+/*! ZSTD_findFrameCompressedSize() : Requires v1.4.0+
+ * `src` should point to the start of a ZSTD frame or skippable frame.
+ * `srcSize` must be >= first frame size
+ * @return : the compressed size of the first frame starting at `src`,
+ *           suitable to pass as `srcSize` to `ZSTD_decompress` or similar,
+ *        or an error code if input is invalid */
+ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize);
+
+
+/*======  Helper functions  ======*/
+#define ZSTD_COMPRESSBOUND(srcSize)   ((srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0))  /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */
+ZSTDLIB_API size_t      ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */
+ZSTDLIB_API unsigned    ZSTD_isError(size_t code);          /*!< tells if a `size_t` function result is an error code */
+ZSTDLIB_API const char* ZSTD_getErrorName(size_t code);     /*!< provides readable string from an error code */
+ZSTDLIB_API int         ZSTD_minCLevel(void);               /*!< minimum negative compression level allowed, requires v1.4.0+ */
+ZSTDLIB_API int         ZSTD_maxCLevel(void);               /*!< maximum compression level available */
+ZSTDLIB_API int         ZSTD_defaultCLevel(void);           /*!< default compression level, specified by ZSTD_CLEVEL_DEFAULT, requires v1.5.0+ */
+
+
+/* *************************************
+*  Explicit context
+***************************************/
+/*= Compression context
+ *  When compressing many times,
+ *  it is recommended to allocate a context just once,
+ *  and re-use it for each successive compression operation.
+ *  This will make workload friendlier for system's memory.
+ *  Note : re-using context is just a speed / resource optimization.
+ *         It doesn't change the compression ratio, which remains identical.
+ *  Note 2 : In multi-threaded environments,
+ *         use one different context per thread for parallel execution.
+ */
+typedef struct ZSTD_CCtx_s ZSTD_CCtx;
+ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void);
+ZSTDLIB_API size_t     ZSTD_freeCCtx(ZSTD_CCtx* cctx);  /* accept NULL pointer */
+
+/*! ZSTD_compressCCtx() :
+ *  Same as ZSTD_compress(), using an explicit ZSTD_CCtx.
+ *  Important : in order to behave similarly to `ZSTD_compress()`,
+ *  this function compresses at requested compression level,
+ *  __ignoring any other parameter__ .
+ *  If any advanced parameter was set using the advanced API,
+ *  they will all be reset. Only `compressionLevel` remains.
+ */
+ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx,
+                                     void* dst, size_t dstCapacity,
+                               const void* src, size_t srcSize,
+                                     int compressionLevel);
+
+/*= Decompression context
+ *  When decompressing many times,
+ *  it is recommended to allocate a context only once,
+ *  and re-use it for each successive compression operation.
+ *  This will make workload friendlier for system's memory.
+ *  Use one context per thread for parallel execution. */
+typedef struct ZSTD_DCtx_s ZSTD_DCtx;
+ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx(void);
+ZSTDLIB_API size_t     ZSTD_freeDCtx(ZSTD_DCtx* dctx);  /* accept NULL pointer */
+
+/*! ZSTD_decompressDCtx() :
+ *  Same as ZSTD_decompress(),
+ *  requires an allocated ZSTD_DCtx.
+ *  Compatible with sticky parameters.
+ */
+ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx,
+                                       void* dst, size_t dstCapacity,
+                                 const void* src, size_t srcSize);
+
+
+/* *******************************************
+*  Advanced compression API (Requires v1.4.0+)
+**********************************************/
+
+/* API design :
+ *   Parameters are pushed one by one into an existing context,
+ *   using ZSTD_CCtx_set*() functions.
+ *   Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame.
+ *   "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` !
+ *   __They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx()__ .
+ *
+ *   It's possible to reset all parameters to "default" using ZSTD_CCtx_reset().
+ *
+ *   This API supersedes all other "advanced" API entry points in the experimental section.
+ *   In the future, we expect to remove from experimental API entry points which are redundant with this API.
+ */
+
+
+/* Compression strategies, listed from fastest to strongest */
+typedef enum { ZSTD_fast=1,
+               ZSTD_dfast=2,
+               ZSTD_greedy=3,
+               ZSTD_lazy=4,
+               ZSTD_lazy2=5,
+               ZSTD_btlazy2=6,
+               ZSTD_btopt=7,
+               ZSTD_btultra=8,
+               ZSTD_btultra2=9
+               /* note : new strategies _might_ be added in the future.
+                         Only the order (from fast to strong) is guaranteed */
+} ZSTD_strategy;
+
+typedef enum {
+
+    /* compression parameters
+     * Note: When compressing with a ZSTD_CDict these parameters are superseded
+     * by the parameters used to construct the ZSTD_CDict.
+     * See ZSTD_CCtx_refCDict() for more info (superseded-by-cdict). */
+    ZSTD_c_compressionLevel=100, /* Set compression parameters according to pre-defined cLevel table.
+                              * Note that exact compression parameters are dynamically determined,
+                              * depending on both compression level and srcSize (when known).
+                              * Default level is ZSTD_CLEVEL_DEFAULT==3.
+                              * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT.
+                              * Note 1 : it's possible to pass a negative compression level.
+                              * Note 2 : setting a level does not automatically set all other compression parameters
+                              *   to default. Setting this will however eventually dynamically impact the compression
+                              *   parameters which have not been manually set. The manually set
+                              *   ones will 'stick'. */
+    /* Advanced compression parameters :
+     * It's possible to pin down compression parameters to some specific values.
+     * In which case, these values are no longer dynamically selected by the compressor */
+    ZSTD_c_windowLog=101,    /* Maximum allowed back-reference distance, expressed as power of 2.
+                              * This will set a memory budget for streaming decompression,
+                              * with larger values requiring more memory
+                              * and typically compressing more.
+                              * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX.
+                              * Special: value 0 means "use default windowLog".
+                              * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT
+                              *       requires explicitly allowing such size at streaming decompression stage. */
+    ZSTD_c_hashLog=102,      /* Size of the initial probe table, as a power of 2.
+                              * Resulting memory usage is (1 << (hashLog+2)).
+                              * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX.
+                              * Larger tables improve compression ratio of strategies <= dFast,
+                              * and improve speed of strategies > dFast.
+                              * Special: value 0 means "use default hashLog". */
+    ZSTD_c_chainLog=103,     /* Size of the multi-probe search table, as a power of 2.
+                              * Resulting memory usage is (1 << (chainLog+2)).
+                              * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX.
+                              * Larger tables result in better and slower compression.
+                              * This parameter is useless for "fast" strategy.
+                              * It's still useful when using "dfast" strategy,
+                              * in which case it defines a secondary probe table.
+                              * Special: value 0 means "use default chainLog". */
+    ZSTD_c_searchLog=104,    /* Number of search attempts, as a power of 2.
+                              * More attempts result in better and slower compression.
+                              * This parameter is useless for "fast" and "dFast" strategies.
+                              * Special: value 0 means "use default searchLog". */
+    ZSTD_c_minMatch=105,     /* Minimum size of searched matches.
+                              * Note that Zstandard can still find matches of smaller size,
+                              * it just tweaks its search algorithm to look for this size and larger.
+                              * Larger values increase compression and decompression speed, but decrease ratio.
+                              * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX.
+                              * Note that currently, for all strategies < btopt, effective minimum is 4.
+                              *                    , for all strategies > fast, effective maximum is 6.
+                              * Special: value 0 means "use default minMatchLength". */
+    ZSTD_c_targetLength=106, /* Impact of this field depends on strategy.
+                              * For strategies btopt, btultra & btultra2:
+                              *     Length of Match considered "good enough" to stop search.
+                              *     Larger values make compression stronger, and slower.
+                              * For strategy fast:
+                              *     Distance between match sampling.
+                              *     Larger values make compression faster, and weaker.
+                              * Special: value 0 means "use default targetLength". */
+    ZSTD_c_strategy=107,     /* See ZSTD_strategy enum definition.
+                              * The higher the value of selected strategy, the more complex it is,
+                              * resulting in stronger and slower compression.
+                              * Special: value 0 means "use default strategy". */
+    /* LDM mode parameters */
+    ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching.
+                                     * This parameter is designed to improve compression ratio
+                                     * for large inputs, by finding large matches at long distance.
+                                     * It increases memory usage and window size.
+                                     * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB
+                                     * except when expressly set to a different value.
+                                     * Note: will be enabled by default if ZSTD_c_windowLog >= 128 MB and
+                                     * compression strategy >= ZSTD_btopt (== compression level 16+) */
+    ZSTD_c_ldmHashLog=161,   /* Size of the table for long distance matching, as a power of 2.
+                              * Larger values increase memory usage and compression ratio,
+                              * but decrease compression speed.
+                              * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX
+                              * default: windowlog - 7.
+                              * Special: value 0 means "automatically determine hashlog". */
+    ZSTD_c_ldmMinMatch=162,  /* Minimum match size for long distance matcher.
+                              * Larger/too small values usually decrease compression ratio.
+                              * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX.
+                              * Special: value 0 means "use default value" (default: 64). */
+    ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution.
+                              * Larger values improve collision resolution but decrease compression speed.
+                              * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX.
+                              * Special: value 0 means "use default value" (default: 3). */
+    ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table.
+                              * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN).
+                              * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage.
+                              * Larger values improve compression speed.
+                              * Deviating far from default value will likely result in a compression ratio decrease.
+                              * Special: value 0 means "automatically determine hashRateLog". */
+
+    /* frame parameters */
+    ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1)
+                              * Content size must be known at the beginning of compression.
+                              * This is automatically the case when using ZSTD_compress2(),
+                              * For streaming scenarios, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */
+    ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */
+    ZSTD_c_dictIDFlag=202,   /* When applicable, dictionary's ID is written into frame header (default:1) */
+
+    /* multi-threading parameters */
+    /* These parameters are only active if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD).
+     * Otherwise, trying to set any other value than default (0) will be a no-op and return an error.
+     * In a situation where it's unknown if the linked library supports multi-threading or not,
+     * setting ZSTD_c_nbWorkers to any value >= 1 and consulting the return value provides a quick way to check this property.
+     */
+    ZSTD_c_nbWorkers=400,    /* Select how many threads will be spawned to compress in parallel.
+                              * When nbWorkers >= 1, triggers asynchronous mode when invoking ZSTD_compressStream*() :
+                              * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller,
+                              * while compression is performed in parallel, within worker thread(s).
+                              * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end :
+                              *  in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call).
+                              * More workers improve speed, but also increase memory usage.
+                              * Default value is `0`, aka "single-threaded mode" : no worker is spawned,
+                              * compression is performed inside Caller's thread, and all invocations are blocking */
+    ZSTD_c_jobSize=401,      /* Size of a compression job. This value is enforced only when nbWorkers >= 1.
+                              * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads.
+                              * 0 means default, which is dynamically determined based on compression parameters.
+                              * Job size must be a minimum of overlap size, or ZSTDMT_JOBSIZE_MIN (= 512 KB), whichever is largest.
+                              * The minimum size is automatically and transparently enforced. */
+    ZSTD_c_overlapLog=402,   /* Control the overlap size, as a fraction of window size.
+                              * The overlap size is an amount of data reloaded from previous job at the beginning of a new job.
+                              * It helps preserve compression ratio, while each job is compressed in parallel.
+                              * This value is enforced only when nbWorkers >= 1.
+                              * Larger values increase compression ratio, but decrease speed.
+                              * Possible values range from 0 to 9 :
+                              * - 0 means "default" : value will be determined by the library, depending on strategy
+                              * - 1 means "no overlap"
+                              * - 9 means "full overlap", using a full window size.
+                              * Each intermediate rank increases/decreases load size by a factor 2 :
+                              * 9: full window;  8: w/2;  7: w/4;  6: w/8;  5:w/16;  4: w/32;  3:w/64;  2:w/128;  1:no overlap;  0:default
+                              * default value varies between 6 and 9, depending on strategy */
+
+    /* note : additional experimental parameters are also available
+     * within the experimental section of the API.
+     * At the time of this writing, they include :
+     * ZSTD_c_rsyncable
+     * ZSTD_c_format
+     * ZSTD_c_forceMaxWindow
+     * ZSTD_c_forceAttachDict
+     * ZSTD_c_literalCompressionMode
+     * ZSTD_c_targetCBlockSize
+     * ZSTD_c_srcSizeHint
+     * ZSTD_c_enableDedicatedDictSearch
+     * ZSTD_c_stableInBuffer
+     * ZSTD_c_stableOutBuffer
+     * ZSTD_c_blockDelimiters
+     * ZSTD_c_validateSequences
+     * ZSTD_c_useBlockSplitter
+     * ZSTD_c_useRowMatchFinder
+     * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
+     * note : never ever use experimentalParam? names directly;
+     *        also, the enums values themselves are unstable and can still change.
+     */
+     ZSTD_c_experimentalParam1=500,
+     ZSTD_c_experimentalParam2=10,
+     ZSTD_c_experimentalParam3=1000,
+     ZSTD_c_experimentalParam4=1001,
+     ZSTD_c_experimentalParam5=1002,
+     ZSTD_c_experimentalParam6=1003,
+     ZSTD_c_experimentalParam7=1004,
+     ZSTD_c_experimentalParam8=1005,
+     ZSTD_c_experimentalParam9=1006,
+     ZSTD_c_experimentalParam10=1007,
+     ZSTD_c_experimentalParam11=1008,
+     ZSTD_c_experimentalParam12=1009,
+     ZSTD_c_experimentalParam13=1010,
+     ZSTD_c_experimentalParam14=1011,
+     ZSTD_c_experimentalParam15=1012
+} ZSTD_cParameter;
+
+typedef struct {
+    size_t error;
+    int lowerBound;
+    int upperBound;
+} ZSTD_bounds;
+
+/*! ZSTD_cParam_getBounds() :
+ *  All parameters must belong to an interval with lower and upper bounds,
+ *  otherwise they will either trigger an error or be automatically clamped.
+ * @return : a structure, ZSTD_bounds, which contains
+ *         - an error status field, which must be tested using ZSTD_isError()
+ *         - lower and upper bounds, both inclusive
+ */
+ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam);
+
+/*! ZSTD_CCtx_setParameter() :
+ *  Set one compression parameter, selected by enum ZSTD_cParameter.
+ *  All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds().
+ *  Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
+ *  Setting a parameter is generally only possible during frame initialization (before starting compression).
+ *  Exception : when using multi-threading mode (nbWorkers >= 1),
+ *              the following parameters can be updated _during_ compression (within same frame):
+ *              => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy.
+ *              new parameters will be active for next job only (after a flush()).
+ * @return : an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value);
+
+/*! ZSTD_CCtx_setPledgedSrcSize() :
+ *  Total input data size to be compressed as a single frame.
+ *  Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag.
+ *  This value will also be controlled at end of frame, and trigger an error if not respected.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame.
+ *           In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN.
+ *           ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame.
+ *  Note 2 : pledgedSrcSize is only valid once, for the next frame.
+ *           It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN.
+ *  Note 3 : Whenever all input data is provided and consumed in a single round,
+ *           for example with ZSTD_compress2(),
+ *           or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end),
+ *           this value is automatically overridden by srcSize instead.
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize);
+
+typedef enum {
+    ZSTD_reset_session_only = 1,
+    ZSTD_reset_parameters = 2,
+    ZSTD_reset_session_and_parameters = 3
+} ZSTD_ResetDirective;
+
+/*! ZSTD_CCtx_reset() :
+ *  There are 2 different things that can be reset, independently or jointly :
+ *  - The session : will stop compressing current frame, and make CCtx ready to start a new one.
+ *                  Useful after an error, or to interrupt any ongoing compression.
+ *                  Any internal data not yet flushed is cancelled.
+ *                  Compression parameters and dictionary remain unchanged.
+ *                  They will be used to compress next frame.
+ *                  Resetting session never fails.
+ *  - The parameters : changes all parameters back to "default".
+ *                  This removes any reference to any dictionary too.
+ *                  Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing)
+ *                  otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError())
+ *  - Both : similar to resetting the session, followed by resetting parameters.
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset);
+
+/*! ZSTD_compress2() :
+ *  Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API.
+ *  ZSTD_compress2() always starts a new frame.
+ *  Should cctx hold data from a previously unfinished frame, everything about it is forgotten.
+ *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
+ *  - The function is always blocking, returns when compression is completed.
+ *  Hint : compression runs faster if `dstCapacity` >=  `ZSTD_compressBound(srcSize)`.
+ * @return : compressed size written into `dst` (<= `dstCapacity),
+ *           or an error code if it fails (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx,
+                                   void* dst, size_t dstCapacity,
+                             const void* src, size_t srcSize);
+
+
+/* *********************************************
+*  Advanced decompression API (Requires v1.4.0+)
+************************************************/
+
+/* The advanced API pushes parameters one by one into an existing DCtx context.
+ * Parameters are sticky, and remain valid for all following frames
+ * using the same DCtx context.
+ * It's possible to reset parameters to default values using ZSTD_DCtx_reset().
+ * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream().
+ *        Therefore, no new decompression function is necessary.
+ */
+
+typedef enum {
+
+    ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which
+                              * the streaming API will refuse to allocate memory buffer
+                              * in order to protect the host from unreasonable memory requirements.
+                              * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode.
+                              * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT).
+                              * Special: value 0 means "use default maximum windowLog". */
+
+    /* note : additional experimental parameters are also available
+     * within the experimental section of the API.
+     * At the time of this writing, they include :
+     * ZSTD_d_format
+     * ZSTD_d_stableOutBuffer
+     * ZSTD_d_forceIgnoreChecksum
+     * ZSTD_d_refMultipleDDicts
+     * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
+     * note : never ever use experimentalParam? names directly
+     */
+     ZSTD_d_experimentalParam1=1000,
+     ZSTD_d_experimentalParam2=1001,
+     ZSTD_d_experimentalParam3=1002,
+     ZSTD_d_experimentalParam4=1003
+
+} ZSTD_dParameter;
+
+/*! ZSTD_dParam_getBounds() :
+ *  All parameters must belong to an interval with lower and upper bounds,
+ *  otherwise they will either trigger an error or be automatically clamped.
+ * @return : a structure, ZSTD_bounds, which contains
+ *         - an error status field, which must be tested using ZSTD_isError()
+ *         - both lower and upper bounds, inclusive
+ */
+ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam);
+
+/*! ZSTD_DCtx_setParameter() :
+ *  Set one compression parameter, selected by enum ZSTD_dParameter.
+ *  All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds().
+ *  Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
+ *  Setting a parameter is only possible during frame initialization (before starting decompression).
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value);
+
+/*! ZSTD_DCtx_reset() :
+ *  Return a DCtx to clean state.
+ *  Session and parameters can be reset jointly or separately.
+ *  Parameters can only be reset when no active frame is being decompressed.
+ * @return : 0, or an error code, which can be tested with ZSTD_isError()
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset);
+
+
+/* **************************
+*  Streaming
+****************************/
+
+typedef struct ZSTD_inBuffer_s {
+  const void* src;    /*< start of input buffer */
+  size_t size;        /*< size of input buffer */
+  size_t pos;         /*< position where reading stopped. Will be updated. Necessarily 0 <= pos <= size */
+} ZSTD_inBuffer;
+
+typedef struct ZSTD_outBuffer_s {
+  void*  dst;         /*< start of output buffer */
+  size_t size;        /*< size of output buffer */
+  size_t pos;         /*< position where writing stopped. Will be updated. Necessarily 0 <= pos <= size */
+} ZSTD_outBuffer;
+
+
+
+/*-***********************************************************************
+*  Streaming compression - HowTo
+*
+*  A ZSTD_CStream object is required to track streaming operation.
+*  Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources.
+*  ZSTD_CStream objects can be reused multiple times on consecutive compression operations.
+*  It is recommended to re-use ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory.
+*
+*  For parallel execution, use one separate ZSTD_CStream per thread.
+*
+*  note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing.
+*
+*  Parameters are sticky : when starting a new compression on the same context,
+*  it will re-use the same sticky parameters as previous compression session.
+*  When in doubt, it's recommended to fully initialize the context before usage.
+*  Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(),
+*  ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to
+*  set more specific parameters, the pledged source size, or load a dictionary.
+*
+*  Use ZSTD_compressStream2() with ZSTD_e_continue as many times as necessary to
+*  consume input stream. The function will automatically update both `pos`
+*  fields within `input` and `output`.
+*  Note that the function may not consume the entire input, for example, because
+*  the output buffer is already full, in which case `input.pos < input.size`.
+*  The caller must check if input has been entirely consumed.
+*  If not, the caller must make some room to receive more compressed data,
+*  and then present again remaining input data.
+*  note: ZSTD_e_continue is guaranteed to make some forward progress when called,
+*        but doesn't guarantee maximal forward progress. This is especially relevant
+*        when compressing with multiple threads. The call won't block if it can
+*        consume some input, but if it can't it will wait for some, but not all,
+*        output to be flushed.
+* @return : provides a minimum amount of data remaining to be flushed from internal buffers
+*           or an error code, which can be tested using ZSTD_isError().
+*
+*  At any moment, it's possible to flush whatever data might remain stuck within internal buffer,
+*  using ZSTD_compressStream2() with ZSTD_e_flush. `output->pos` will be updated.
+*  Note that, if `output->size` is too small, a single invocation with ZSTD_e_flush might not be enough (return code > 0).
+*  In which case, make some room to receive more compressed data, and call again ZSTD_compressStream2() with ZSTD_e_flush.
+*  You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the
+*  operation.
+*  note: ZSTD_e_flush will flush as much output as possible, meaning when compressing with multiple threads, it will
+*        block until the flush is complete or the output buffer is full.
+*  @return : 0 if internal buffers are entirely flushed,
+*            >0 if some data still present within internal buffer (the value is minimal estimation of remaining size),
+*            or an error code, which can be tested using ZSTD_isError().
+*
+*  Calling ZSTD_compressStream2() with ZSTD_e_end instructs to finish a frame.
+*  It will perform a flush and write frame epilogue.
+*  The epilogue is required for decoders to consider a frame completed.
+*  flush operation is the same, and follows same rules as calling ZSTD_compressStream2() with ZSTD_e_flush.
+*  You must continue calling ZSTD_compressStream2() with ZSTD_e_end until it returns 0, at which point you are free to
+*  start a new frame.
+*  note: ZSTD_e_end will flush as much output as possible, meaning when compressing with multiple threads, it will
+*        block until the flush is complete or the output buffer is full.
+*  @return : 0 if frame fully completed and fully flushed,
+*            >0 if some data still present within internal buffer (the value is minimal estimation of remaining size),
+*            or an error code, which can be tested using ZSTD_isError().
+*
+* *******************************************************************/
+
+typedef ZSTD_CCtx ZSTD_CStream;  /*< CCtx and CStream are now effectively same object (>= v1.3.0) */
+                                 /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */
+/*===== ZSTD_CStream management functions =====*/
+ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void);
+ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs);  /* accept NULL pointer */
+
+/*===== Streaming compression functions =====*/
+typedef enum {
+    ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */
+    ZSTD_e_flush=1,    /* flush any data provided so far,
+                        * it creates (at least) one new block, that can be decoded immediately on reception;
+                        * frame will continue: any future data can still reference previously compressed data, improving compression.
+                        * note : multithreaded compression will block to flush as much output as possible. */
+    ZSTD_e_end=2       /* flush any remaining data _and_ close current frame.
+                        * note that frame is only closed after compressed data is fully flushed (return value == 0).
+                        * After that point, any additional data starts a new frame.
+                        * note : each frame is independent (does not reference any content from previous frame).
+                        : note : multithreaded compression will block to flush as much output as possible. */
+} ZSTD_EndDirective;
+
+/*! ZSTD_compressStream2() : Requires v1.4.0+
+ *  Behaves about the same as ZSTD_compressStream, with additional control on end directive.
+ *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
+ *  - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode)
+ *  - output->pos must be <= dstCapacity, input->pos must be <= srcSize
+ *  - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit.
+ *  - endOp must be a valid directive
+ *  - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller.
+ *  - When nbWorkers>=1, function is non-blocking : it copies a portion of input, distributes jobs to internal worker threads, flush to output whatever is available,
+ *                                                  and then immediately returns, just indicating that there is some data remaining to be flushed.
+ *                                                  The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte.
+ *  - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking.
+ *  - @return provides a minimum amount of data remaining to be flushed from internal buffers
+ *            or an error code, which can be tested using ZSTD_isError().
+ *            if @return != 0, flush is not fully completed, there is still some data left within internal buffers.
+ *            This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers.
+ *            For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed.
+ *  - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0),
+ *            only ZSTD_e_end or ZSTD_e_flush operations are allowed.
+ *            Before starting a new compression job, or changing compression parameters,
+ *            it is required to fully flush internal buffers.
+ */
+ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx,
+                                         ZSTD_outBuffer* output,
+                                         ZSTD_inBuffer* input,
+                                         ZSTD_EndDirective endOp);
+
+
+/* These buffer sizes are softly recommended.
+ * They are not required : ZSTD_compressStream*() happily accepts any buffer size, for both input and output.
+ * Respecting the recommended size just makes it a bit easier for ZSTD_compressStream*(),
+ * reducing the amount of memory shuffling and buffering, resulting in minor performance savings.
+ *
+ * However, note that these recommendations are from the perspective of a C caller program.
+ * If the streaming interface is invoked from some other language,
+ * especially managed ones such as Java or Go, through a foreign function interface such as jni or cgo,
+ * a major performance rule is to reduce crossing such interface to an absolute minimum.
+ * It's not rare that performance ends being spent more into the interface, rather than compression itself.
+ * In which cases, prefer using large buffers, as large as practical,
+ * for both input and output, to reduce the nb of roundtrips.
+ */
+ZSTDLIB_API size_t ZSTD_CStreamInSize(void);    /*< recommended size for input buffer */
+ZSTDLIB_API size_t ZSTD_CStreamOutSize(void);   /*< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block. */
+
+
+/* *****************************************************************************
+ * This following is a legacy streaming API, available since v1.0+ .
+ * It can be replaced by ZSTD_CCtx_reset() and ZSTD_compressStream2().
+ * It is redundant, but remains fully supported.
+ * Streaming in combination with advanced parameters and dictionary compression
+ * can only be used through the new API.
+ ******************************************************************************/
+
+/*!
+ * Equivalent to:
+ *
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any)
+ *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ */
+ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel);
+/*!
+ * Alternative for ZSTD_compressStream2(zcs, output, input, ZSTD_e_continue).
+ * NOTE: The return value is different. ZSTD_compressStream() returns a hint for
+ * the next read size (if non-zero and not an error). ZSTD_compressStream2()
+ * returns the minimum nb of bytes left to flush (if non-zero and not an error).
+ */
+ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
+/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_flush). */
+ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_end). */
+ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+
+
+/*-***************************************************************************
+*  Streaming decompression - HowTo
+*
+*  A ZSTD_DStream object is required to track streaming operations.
+*  Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources.
+*  ZSTD_DStream objects can be re-used multiple times.
+*
+*  Use ZSTD_initDStream() to start a new decompression operation.
+* @return : recommended first input size
+*  Alternatively, use advanced API to set specific properties.
+*
+*  Use ZSTD_decompressStream() repetitively to consume your input.
+*  The function will update both `pos` fields.
+*  If `input.pos < input.size`, some input has not been consumed.
+*  It's up to the caller to present again remaining data.
+*  The function tries to flush all data decoded immediately, respecting output buffer size.
+*  If `output.pos < output.size`, decoder has flushed everything it could.
+*  But if `output.pos == output.size`, there might be some data left within internal buffers.,
+*  In which case, call ZSTD_decompressStream() again to flush whatever remains in the buffer.
+*  Note : with no additional input provided, amount of data flushed is necessarily <= ZSTD_BLOCKSIZE_MAX.
+* @return : 0 when a frame is completely decoded and fully flushed,
+*        or an error code, which can be tested using ZSTD_isError(),
+*        or any other value > 0, which means there is still some decoding or flushing to do to complete current frame :
+*                                the return value is a suggested next input size (just a hint for better latency)
+*                                that will never request more than the remaining frame size.
+* *******************************************************************************/
+
+typedef ZSTD_DCtx ZSTD_DStream;  /*< DCtx and DStream are now effectively same object (>= v1.3.0) */
+                                 /* For compatibility with versions <= v1.2.0, prefer differentiating them. */
+/*===== ZSTD_DStream management functions =====*/
+ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void);
+ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds);  /* accept NULL pointer */
+
+/*===== Streaming decompression functions =====*/
+
+/* This function is redundant with the advanced API and equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *     ZSTD_DCtx_refDDict(zds, NULL);
+ */
+ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds);
+
+ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
+
+ZSTDLIB_API size_t ZSTD_DStreamInSize(void);    /*!< recommended size for input buffer */
+ZSTDLIB_API size_t ZSTD_DStreamOutSize(void);   /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */
+
+
+/* ************************
+*  Simple dictionary API
+***************************/
+/*! ZSTD_compress_usingDict() :
+ *  Compression at an explicit compression level using a Dictionary.
+ *  A dictionary can be any arbitrary data segment (also called a prefix),
+ *  or a buffer with specified information (see zdict.h).
+ *  Note : This function loads the dictionary, resulting in significant startup delay.
+ *         It's intended for a dictionary used only once.
+ *  Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */
+ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx,
+                                           void* dst, size_t dstCapacity,
+                                     const void* src, size_t srcSize,
+                                     const void* dict,size_t dictSize,
+                                           int compressionLevel);
+
+/*! ZSTD_decompress_usingDict() :
+ *  Decompression using a known Dictionary.
+ *  Dictionary must be identical to the one used during compression.
+ *  Note : This function loads the dictionary, resulting in significant startup delay.
+ *         It's intended for a dictionary used only once.
+ *  Note : When `dict == NULL || dictSize < 8` no dictionary is used. */
+ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx,
+                                             void* dst, size_t dstCapacity,
+                                       const void* src, size_t srcSize,
+                                       const void* dict,size_t dictSize);
+
+
+/* *********************************
+ *  Bulk processing dictionary API
+ **********************************/
+typedef struct ZSTD_CDict_s ZSTD_CDict;
+
+/*! ZSTD_createCDict() :
+ *  When compressing multiple messages or blocks using the same dictionary,
+ *  it's recommended to digest the dictionary only once, since it's a costly operation.
+ *  ZSTD_createCDict() will create a state from digesting a dictionary.
+ *  The resulting state can be used for future compression operations with very limited startup cost.
+ *  ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only.
+ * @dictBuffer can be released after ZSTD_CDict creation, because its content is copied within CDict.
+ *  Note 1 : Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate @dictBuffer content.
+ *  Note 2 : A ZSTD_CDict can be created from an empty @dictBuffer,
+ *      in which case the only thing that it transports is the @compressionLevel.
+ *      This can be useful in a pipeline featuring ZSTD_compress_usingCDict() exclusively,
+ *      expecting a ZSTD_CDict parameter with any data, including those without a known dictionary. */
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize,
+                                         int compressionLevel);
+
+/*! ZSTD_freeCDict() :
+ *  Function frees memory allocated by ZSTD_createCDict().
+ *  If a NULL pointer is passed, no operation is performed. */
+ZSTDLIB_API size_t      ZSTD_freeCDict(ZSTD_CDict* CDict);
+
+/*! ZSTD_compress_usingCDict() :
+ *  Compression using a digested Dictionary.
+ *  Recommended when same dictionary is used multiple times.
+ *  Note : compression level is _decided at dictionary creation time_,
+ *     and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */
+ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx,
+                                            void* dst, size_t dstCapacity,
+                                      const void* src, size_t srcSize,
+                                      const ZSTD_CDict* cdict);
+
+
+typedef struct ZSTD_DDict_s ZSTD_DDict;
+
+/*! ZSTD_createDDict() :
+ *  Create a digested dictionary, ready to start decompression operation without startup delay.
+ *  dictBuffer can be released after DDict creation, as its content is copied inside DDict. */
+ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize);
+
+/*! ZSTD_freeDDict() :
+ *  Function frees memory allocated with ZSTD_createDDict()
+ *  If a NULL pointer is passed, no operation is performed. */
+ZSTDLIB_API size_t      ZSTD_freeDDict(ZSTD_DDict* ddict);
+
+/*! ZSTD_decompress_usingDDict() :
+ *  Decompression using a digested Dictionary.
+ *  Recommended when same dictionary is used multiple times. */
+ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx,
+                                              void* dst, size_t dstCapacity,
+                                        const void* src, size_t srcSize,
+                                        const ZSTD_DDict* ddict);
+
+
+/* ******************************
+ *  Dictionary helper functions
+ *******************************/
+
+/*! ZSTD_getDictID_fromDict() : Requires v1.4.0+
+ *  Provides the dictID stored within dictionary.
+ *  if @return == 0, the dictionary is not conformant with Zstandard specification.
+ *  It can still be loaded, but as a content-only dictionary. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize);
+
+/*! ZSTD_getDictID_fromCDict() : Requires v1.5.0+
+ *  Provides the dictID of the dictionary loaded into `cdict`.
+ *  If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
+ *  Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromCDict(const ZSTD_CDict* cdict);
+
+/*! ZSTD_getDictID_fromDDict() : Requires v1.4.0+
+ *  Provides the dictID of the dictionary loaded into `ddict`.
+ *  If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
+ *  Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict);
+
+/*! ZSTD_getDictID_fromFrame() : Requires v1.4.0+
+ *  Provides the dictID required to decompressed the frame stored within `src`.
+ *  If @return == 0, the dictID could not be decoded.
+ *  This could for one of the following reasons :
+ *  - The frame does not require a dictionary to be decoded (most common case).
+ *  - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information.
+ *    Note : this use case also happens when using a non-conformant dictionary.
+ *  - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`).
+ *  - This is not a Zstandard frame.
+ *  When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
+
+
+/* *****************************************************************************
+ * Advanced dictionary and prefix API (Requires v1.4.0+)
+ *
+ * This API allows dictionaries to be used with ZSTD_compress2(),
+ * ZSTD_compressStream2(), and ZSTD_decompressDCtx(). Dictionaries are sticky, and
+ * only reset with the context is reset with ZSTD_reset_parameters or
+ * ZSTD_reset_session_and_parameters. Prefixes are single-use.
+ ******************************************************************************/
+
+
+/*! ZSTD_CCtx_loadDictionary() : Requires v1.4.0+
+ *  Create an internal CDict from `dict` buffer.
+ *  Decompression will have to use same dictionary.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special: Loading a NULL (or 0-size) dictionary invalidates previous dictionary,
+ *           meaning "return to no-dictionary mode".
+ *  Note 1 : Dictionary is sticky, it will be used for all future compressed frames.
+ *           To return to "no-dictionary" situation, load a NULL dictionary (or reset parameters).
+ *  Note 2 : Loading a dictionary involves building tables.
+ *           It's also a CPU consuming operation, with non-negligible impact on latency.
+ *           Tables are dependent on compression parameters, and for this reason,
+ *           compression parameters can no longer be changed after loading a dictionary.
+ *  Note 3 :`dict` content will be copied internally.
+ *           Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead.
+ *           In such a case, dictionary buffer must outlive its users.
+ *  Note 4 : Use ZSTD_CCtx_loadDictionary_advanced()
+ *           to precisely select how dictionary content must be interpreted. */
+ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_CCtx_refCDict() : Requires v1.4.0+
+ *  Reference a prepared dictionary, to be used for all next compressed frames.
+ *  Note that compression parameters are enforced from within CDict,
+ *  and supersede any compression parameter previously set within CCtx.
+ *  The parameters ignored are labelled as "superseded-by-cdict" in the ZSTD_cParameter enum docs.
+ *  The ignored parameters will be used again if the CCtx is returned to no-dictionary mode.
+ *  The dictionary will remain valid for future compressed frames using same CCtx.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special : Referencing a NULL CDict means "return to no-dictionary mode".
+ *  Note 1 : Currently, only one dictionary can be managed.
+ *           Referencing a new dictionary effectively "discards" any previous one.
+ *  Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */
+ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict);
+
+/*! ZSTD_CCtx_refPrefix() : Requires v1.4.0+
+ *  Reference a prefix (single-usage dictionary) for next compressed frame.
+ *  A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end).
+ *  Decompression will need same prefix to properly regenerate data.
+ *  Compressing with a prefix is similar in outcome as performing a diff and compressing it,
+ *  but performs much faster, especially during decompression (compression speed is tunable with compression level).
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary
+ *  Note 1 : Prefix buffer is referenced. It **must** outlive compression.
+ *           Its content must remain unmodified during compression.
+ *  Note 2 : If the intention is to diff some large src data blob with some prior version of itself,
+ *           ensure that the window size is large enough to contain the entire source.
+ *           See ZSTD_c_windowLog.
+ *  Note 3 : Referencing a prefix involves building tables, which are dependent on compression parameters.
+ *           It's a CPU consuming operation, with non-negligible impact on latency.
+ *           If there is a need to use the same prefix multiple times, consider loadDictionary instead.
+ *  Note 4 : By default, the prefix is interpreted as raw content (ZSTD_dct_rawContent).
+ *           Use experimental ZSTD_CCtx_refPrefix_advanced() to alter dictionary interpretation. */
+ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx,
+                                 const void* prefix, size_t prefixSize);
+
+/*! ZSTD_DCtx_loadDictionary() : Requires v1.4.0+
+ *  Create an internal DDict from dict buffer,
+ *  to be used to decompress next frames.
+ *  The dictionary remains valid for all future frames, until explicitly invalidated.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary,
+ *            meaning "return to no-dictionary mode".
+ *  Note 1 : Loading a dictionary involves building tables,
+ *           which has a non-negligible impact on CPU usage and latency.
+ *           It's recommended to "load once, use many times", to amortize the cost
+ *  Note 2 :`dict` content will be copied internally, so `dict` can be released after loading.
+ *           Use ZSTD_DCtx_loadDictionary_byReference() to reference dictionary content instead.
+ *  Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to take control of
+ *           how dictionary content is loaded and interpreted.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_DCtx_refDDict() : Requires v1.4.0+
+ *  Reference a prepared dictionary, to be used to decompress next frames.
+ *  The dictionary remains active for decompression of future frames using same DCtx.
+ *
+ *  If called with ZSTD_d_refMultipleDDicts enabled, repeated calls of this function
+ *  will store the DDict references in a table, and the DDict used for decompression
+ *  will be determined at decompression time, as per the dict ID in the frame.
+ *  The memory for the table is allocated on the first call to refDDict, and can be
+ *  freed with ZSTD_freeDCtx().
+ *
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : Currently, only one dictionary can be managed.
+ *           Referencing a new dictionary effectively "discards" any previous one.
+ *  Special: referencing a NULL DDict means "return to no-dictionary mode".
+ *  Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
+
+/*! ZSTD_DCtx_refPrefix() : Requires v1.4.0+
+ *  Reference a prefix (single-usage dictionary) to decompress next frame.
+ *  This is the reverse operation of ZSTD_CCtx_refPrefix(),
+ *  and must use the same prefix as the one used during compression.
+ *  Prefix is **only used once**. Reference is discarded at end of frame.
+ *  End of frame is reached when ZSTD_decompressStream() returns 0.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary
+ *  Note 2 : Prefix buffer is referenced. It **must** outlive decompression.
+ *           Prefix buffer must remain unmodified up to the end of frame,
+ *           reached when ZSTD_decompressStream() returns 0.
+ *  Note 3 : By default, the prefix is treated as raw content (ZSTD_dct_rawContent).
+ *           Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode (Experimental section)
+ *  Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost.
+ *           A full dictionary is more costly, as it requires building tables.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx,
+                                 const void* prefix, size_t prefixSize);
+
+/* ===   Memory management   === */
+
+/*! ZSTD_sizeof_*() : Requires v1.4.0+
+ *  These functions give the _current_ memory usage of selected object.
+ *  Note that object memory usage can evolve (increase or decrease) over time. */
+ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx);
+ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx);
+ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs);
+ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds);
+ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict);
+ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
+
+#endif  /* ZSTD_H_235446 */
+
+
+/* **************************************************************************************
+ *   ADVANCED AND EXPERIMENTAL FUNCTIONS
+ ****************************************************************************************
+ * The definitions in the following section are considered experimental.
+ * They are provided for advanced scenarios.
+ * They should never be used with a dynamic library, as prototypes may change in the future.
+ * Use them only in association with static linking.
+ * ***************************************************************************************/
+
+#if !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY)
+#define ZSTD_H_ZSTD_STATIC_LINKING_ONLY
+
+/* This can be overridden externally to hide static symbols. */
+#ifndef ZSTDLIB_STATIC_API
+#define ZSTDLIB_STATIC_API ZSTDLIB_VISIBLE
+#endif
+
+/* Deprecation warnings :
+ * Should these warnings be a problem, it is generally possible to disable them,
+ * typically with -Wno-deprecated-declarations for gcc or _CRT_SECURE_NO_WARNINGS in Visual.
+ * Otherwise, it's also possible to define ZSTD_DISABLE_DEPRECATE_WARNINGS.
+ */
+#ifdef ZSTD_DISABLE_DEPRECATE_WARNINGS
+#  define ZSTD_DEPRECATED(message) ZSTDLIB_STATIC_API  /* disable deprecation warnings */
+#else
+#  if (defined(GNUC) && (GNUC > 4 || (GNUC == 4 && GNUC_MINOR >= 5))) || defined(__clang__)
+#    define ZSTD_DEPRECATED(message) ZSTDLIB_STATIC_API __attribute__((deprecated(message)))
+#  elif (__GNUC__ >= 3)
+#    define ZSTD_DEPRECATED(message) ZSTDLIB_STATIC_API __attribute__((deprecated))
+#  else
+#    pragma message("WARNING: You need to implement ZSTD_DEPRECATED for this compiler")
+#    define ZSTD_DEPRECATED(message) ZSTDLIB_STATIC_API
+#  endif
+#endif /* ZSTD_DISABLE_DEPRECATE_WARNINGS */
+
+/* **************************************************************************************
+ *   experimental API (static linking only)
+ ****************************************************************************************
+ * The following symbols and constants
+ * are not planned to join "stable API" status in the near future.
+ * They can still change in future versions.
+ * Some of them are planned to remain in the static_only section indefinitely.
+ * Some of them might be removed in the future (especially when redundant with existing stable functions)
+ * ***************************************************************************************/
+
+#define ZSTD_FRAMEHEADERSIZE_PREFIX(format) ((format) == ZSTD_f_zstd1 ? 5 : 1)   /* minimum input size required to query frame header size */
+#define ZSTD_FRAMEHEADERSIZE_MIN(format)    ((format) == ZSTD_f_zstd1 ? 6 : 2)
+#define ZSTD_FRAMEHEADERSIZE_MAX   18   /* can be useful for static allocation */
+#define ZSTD_SKIPPABLEHEADERSIZE    8
+
+/* compression parameter bounds */
+#define ZSTD_WINDOWLOG_MAX_32    30
+#define ZSTD_WINDOWLOG_MAX_64    31
+#define ZSTD_WINDOWLOG_MAX     ((int)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64))
+#define ZSTD_WINDOWLOG_MIN       10
+#define ZSTD_HASHLOG_MAX       ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30)
+#define ZSTD_HASHLOG_MIN          6
+#define ZSTD_CHAINLOG_MAX_32     29
+#define ZSTD_CHAINLOG_MAX_64     30
+#define ZSTD_CHAINLOG_MAX      ((int)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64))
+#define ZSTD_CHAINLOG_MIN        ZSTD_HASHLOG_MIN
+#define ZSTD_SEARCHLOG_MAX      (ZSTD_WINDOWLOG_MAX-1)
+#define ZSTD_SEARCHLOG_MIN        1
+#define ZSTD_MINMATCH_MAX         7   /* only for ZSTD_fast, other strategies are limited to 6 */
+#define ZSTD_MINMATCH_MIN         3   /* only for ZSTD_btopt+, faster strategies are limited to 4 */
+#define ZSTD_TARGETLENGTH_MAX    ZSTD_BLOCKSIZE_MAX
+#define ZSTD_TARGETLENGTH_MIN     0   /* note : comparing this constant to an unsigned results in a tautological test */
+#define ZSTD_STRATEGY_MIN        ZSTD_fast
+#define ZSTD_STRATEGY_MAX        ZSTD_btultra2
+
+
+#define ZSTD_OVERLAPLOG_MIN       0
+#define ZSTD_OVERLAPLOG_MAX       9
+
+#define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27   /* by default, the streaming decoder will refuse any frame
+                                           * requiring larger than (1<<ZSTD_WINDOWLOG_LIMIT_DEFAULT) window size,
+                                           * to preserve host's memory from unreasonable requirements.
+                                           * This limit can be overridden using ZSTD_DCtx_setParameter(,ZSTD_d_windowLogMax,).
+                                           * The limit does not apply for one-pass decoders (such as ZSTD_decompress()), since no additional memory is allocated */
+
+
+/* LDM parameter bounds */
+#define ZSTD_LDM_HASHLOG_MIN      ZSTD_HASHLOG_MIN
+#define ZSTD_LDM_HASHLOG_MAX      ZSTD_HASHLOG_MAX
+#define ZSTD_LDM_MINMATCH_MIN        4
+#define ZSTD_LDM_MINMATCH_MAX     4096
+#define ZSTD_LDM_BUCKETSIZELOG_MIN   1
+#define ZSTD_LDM_BUCKETSIZELOG_MAX   8
+#define ZSTD_LDM_HASHRATELOG_MIN     0
+#define ZSTD_LDM_HASHRATELOG_MAX (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN)
+
+/* Advanced parameter bounds */
+#define ZSTD_TARGETCBLOCKSIZE_MIN   64
+#define ZSTD_TARGETCBLOCKSIZE_MAX   ZSTD_BLOCKSIZE_MAX
+#define ZSTD_SRCSIZEHINT_MIN        0
+
+
+/* ---  Advanced types  --- */
+
+typedef struct ZSTD_CCtx_params_s ZSTD_CCtx_params;
+
+typedef struct {
+    unsigned int offset;      /* The offset of the match. (NOT the same as the offset code)
+                               * If offset == 0 and matchLength == 0, this sequence represents the last
+                               * literals in the block of litLength size.
+                               */
+
+    unsigned int litLength;   /* Literal length of the sequence. */
+    unsigned int matchLength; /* Match length of the sequence. */
+
+                              /* Note: Users of this API may provide a sequence with matchLength == litLength == offset == 0.
+                               * In this case, we will treat the sequence as a marker for a block boundary.
+                               */
+
+    unsigned int rep;         /* Represents which repeat offset is represented by the field 'offset'.
+                               * Ranges from [0, 3].
+                               *
+                               * Repeat offsets are essentially previous offsets from previous sequences sorted in
+                               * recency order. For more detail, see doc/zstd_compression_format.md
+                               *
+                               * If rep == 0, then 'offset' does not contain a repeat offset.
+                               * If rep > 0:
+                               *  If litLength != 0:
+                               *      rep == 1 --> offset == repeat_offset_1
+                               *      rep == 2 --> offset == repeat_offset_2
+                               *      rep == 3 --> offset == repeat_offset_3
+                               *  If litLength == 0:
+                               *      rep == 1 --> offset == repeat_offset_2
+                               *      rep == 2 --> offset == repeat_offset_3
+                               *      rep == 3 --> offset == repeat_offset_1 - 1
+                               *
+                               * Note: This field is optional. ZSTD_generateSequences() will calculate the value of
+                               * 'rep', but repeat offsets do not necessarily need to be calculated from an external
+                               * sequence provider's perspective. For example, ZSTD_compressSequences() does not
+                               * use this 'rep' field at all (as of now).
+                               */
+} ZSTD_Sequence;
+
+typedef struct {
+    unsigned windowLog;       /*< largest match distance : larger == more compression, more memory needed during decompression */
+    unsigned chainLog;        /*< fully searched segment : larger == more compression, slower, more memory (useless for fast) */
+    unsigned hashLog;         /*< dispatch table : larger == faster, more memory */
+    unsigned searchLog;       /*< nb of searches : larger == more compression, slower */
+    unsigned minMatch;        /*< match length searched : larger == faster decompression, sometimes less compression */
+    unsigned targetLength;    /*< acceptable match size for optimal parser (only) : larger == more compression, slower */
+    ZSTD_strategy strategy;   /*< see ZSTD_strategy definition above */
+} ZSTD_compressionParameters;
+
+typedef struct {
+    int contentSizeFlag; /*< 1: content size will be in frame header (when known) */
+    int checksumFlag;    /*< 1: generate a 32-bits checksum using XXH64 algorithm at end of frame, for error detection */
+    int noDictIDFlag;    /*< 1: no dictID will be saved into frame header (dictID is only useful for dictionary compression) */
+} ZSTD_frameParameters;
+
+typedef struct {
+    ZSTD_compressionParameters cParams;
+    ZSTD_frameParameters fParams;
+} ZSTD_parameters;
+
+typedef enum {
+    ZSTD_dct_auto = 0,       /* dictionary is "full" when starting with ZSTD_MAGIC_DICTIONARY, otherwise it is "rawContent" */
+    ZSTD_dct_rawContent = 1, /* ensures dictionary is always loaded as rawContent, even if it starts with ZSTD_MAGIC_DICTIONARY */
+    ZSTD_dct_fullDict = 2    /* refuses to load a dictionary if it does not respect Zstandard's specification, starting with ZSTD_MAGIC_DICTIONARY */
+} ZSTD_dictContentType_e;
+
+typedef enum {
+    ZSTD_dlm_byCopy = 0,  /*< Copy dictionary content internally */
+    ZSTD_dlm_byRef = 1    /*< Reference dictionary content -- the dictionary buffer must outlive its users. */
+} ZSTD_dictLoadMethod_e;
+
+typedef enum {
+    ZSTD_f_zstd1 = 0,           /* zstd frame format, specified in zstd_compression_format.md (default) */
+    ZSTD_f_zstd1_magicless = 1  /* Variant of zstd frame format, without initial 4-bytes magic number.
+                                 * Useful to save 4 bytes per generated frame.
+                                 * Decoder cannot recognise automatically this format, requiring this instruction. */
+} ZSTD_format_e;
+
+typedef enum {
+    /* Note: this enum controls ZSTD_d_forceIgnoreChecksum */
+    ZSTD_d_validateChecksum = 0,
+    ZSTD_d_ignoreChecksum = 1
+} ZSTD_forceIgnoreChecksum_e;
+
+typedef enum {
+    /* Note: this enum controls ZSTD_d_refMultipleDDicts */
+    ZSTD_rmd_refSingleDDict = 0,
+    ZSTD_rmd_refMultipleDDicts = 1
+} ZSTD_refMultipleDDicts_e;
+
+typedef enum {
+    /* Note: this enum and the behavior it controls are effectively internal
+     * implementation details of the compressor. They are expected to continue
+     * to evolve and should be considered only in the context of extremely
+     * advanced performance tuning.
+     *
+     * Zstd currently supports the use of a CDict in three ways:
+     *
+     * - The contents of the CDict can be copied into the working context. This
+     *   means that the compression can search both the dictionary and input
+     *   while operating on a single set of internal tables. This makes
+     *   the compression faster per-byte of input. However, the initial copy of
+     *   the CDict's tables incurs a fixed cost at the beginning of the
+     *   compression. For small compressions (< 8 KB), that copy can dominate
+     *   the cost of the compression.
+     *
+     * - The CDict's tables can be used in-place. In this model, compression is
+     *   slower per input byte, because the compressor has to search two sets of
+     *   tables. However, this model incurs no start-up cost (as long as the
+     *   working context's tables can be reused). For small inputs, this can be
+     *   faster than copying the CDict's tables.
+     *
+     * - The CDict's tables are not used at all, and instead we use the working
+     *   context alone to reload the dictionary and use params based on the source
+     *   size. See ZSTD_compress_insertDictionary() and ZSTD_compress_usingDict().
+     *   This method is effective when the dictionary sizes are very small relative
+     *   to the input size, and the input size is fairly large to begin with.
+     *
+     * Zstd has a simple internal heuristic that selects which strategy to use
+     * at the beginning of a compression. However, if experimentation shows that
+     * Zstd is making poor choices, it is possible to override that choice with
+     * this enum.
+     */
+    ZSTD_dictDefaultAttach = 0, /* Use the default heuristic. */
+    ZSTD_dictForceAttach   = 1, /* Never copy the dictionary. */
+    ZSTD_dictForceCopy     = 2, /* Always copy the dictionary. */
+    ZSTD_dictForceLoad     = 3  /* Always reload the dictionary */
+} ZSTD_dictAttachPref_e;
+
+typedef enum {
+  ZSTD_lcm_auto = 0,          /*< Automatically determine the compression mode based on the compression level.
+                               *   Negative compression levels will be uncompressed, and positive compression
+                               *   levels will be compressed. */
+  ZSTD_lcm_huffman = 1,       /*< Always attempt Huffman compression. Uncompressed literals will still be
+                               *   emitted if Huffman compression is not profitable. */
+  ZSTD_lcm_uncompressed = 2   /*< Always emit uncompressed literals. */
+} ZSTD_literalCompressionMode_e;
+
+typedef enum {
+  /* Note: This enum controls features which are conditionally beneficial. Zstd typically will make a final
+   * decision on whether or not to enable the feature (ZSTD_ps_auto), but setting the switch to ZSTD_ps_enable
+   * or ZSTD_ps_disable allow for a force enable/disable the feature.
+   */
+  ZSTD_ps_auto = 0,         /* Let the library automatically determine whether the feature shall be enabled */
+  ZSTD_ps_enable = 1,       /* Force-enable the feature */
+  ZSTD_ps_disable = 2       /* Do not use the feature */
+} ZSTD_paramSwitch_e;
+
+/* *************************************
+*  Frame size functions
+***************************************/
+
+/*! ZSTD_findDecompressedSize() :
+ *  `src` should point to the start of a series of ZSTD encoded and/or skippable frames
+ *  `srcSize` must be the _exact_ size of this series
+ *       (i.e. there should be a frame boundary at `src + srcSize`)
+ *  @return : - decompressed size of all data in all successive frames
+ *            - if the decompressed size cannot be determined: ZSTD_CONTENTSIZE_UNKNOWN
+ *            - if an error occurred: ZSTD_CONTENTSIZE_ERROR
+ *
+ *   note 1 : decompressed size is an optional field, that may not be present, especially in streaming mode.
+ *            When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *   note 2 : decompressed size is always present when compression is done with ZSTD_compress()
+ *   note 3 : decompressed size can be very large (64-bits value),
+ *            potentially larger than what local system can handle as a single memory segment.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *   note 4 : If source is untrusted, decompressed size could be wrong or intentionally modified.
+ *            Always ensure result fits within application's authorized limits.
+ *            Each application can set its own limits.
+ *   note 5 : ZSTD_findDecompressedSize handles multiple frames, and so it must traverse the input to
+ *            read each contained frame header.  This is fast as most of the data is skipped,
+ *            however it does mean that all frame data must be present and valid. */
+ZSTDLIB_STATIC_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t srcSize);
+
+/*! ZSTD_decompressBound() :
+ *  `src` should point to the start of a series of ZSTD encoded and/or skippable frames
+ *  `srcSize` must be the _exact_ size of this series
+ *       (i.e. there should be a frame boundary at `src + srcSize`)
+ *  @return : - upper-bound for the decompressed size of all data in all successive frames
+ *            - if an error occurred: ZSTD_CONTENTSIZE_ERROR
+ *
+ *  note 1  : an error can occur if `src` contains an invalid or incorrectly formatted frame.
+ *  note 2  : the upper-bound is exact when the decompressed size field is available in every ZSTD encoded frame of `src`.
+ *            in this case, `ZSTD_findDecompressedSize` and `ZSTD_decompressBound` return the same value.
+ *  note 3  : when the decompressed size field isn't available, the upper-bound for that frame is calculated by:
+ *              upper-bound = # blocks * min(128 KB, Window_Size)
+ */
+ZSTDLIB_STATIC_API unsigned long long ZSTD_decompressBound(const void* src, size_t srcSize);
+
+/*! ZSTD_frameHeaderSize() :
+ *  srcSize must be >= ZSTD_FRAMEHEADERSIZE_PREFIX.
+ * @return : size of the Frame Header,
+ *           or an error code (if srcSize is too small) */
+ZSTDLIB_STATIC_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize);
+
+typedef enum {
+  ZSTD_sf_noBlockDelimiters = 0,         /* Representation of ZSTD_Sequence has no block delimiters, sequences only */
+  ZSTD_sf_explicitBlockDelimiters = 1    /* Representation of ZSTD_Sequence contains explicit block delimiters */
+} ZSTD_sequenceFormat_e;
+
+/*! ZSTD_generateSequences() :
+ * Generate sequences using ZSTD_compress2, given a source buffer.
+ *
+ * Each block will end with a dummy sequence
+ * with offset == 0, matchLength == 0, and litLength == length of last literals.
+ * litLength may be == 0, and if so, then the sequence of (of: 0 ml: 0 ll: 0)
+ * simply acts as a block delimiter.
+ *
+ * zc can be used to insert custom compression params.
+ * This function invokes ZSTD_compress2
+ *
+ * The output of this function can be fed into ZSTD_compressSequences() with CCtx
+ * setting of ZSTD_c_blockDelimiters as ZSTD_sf_explicitBlockDelimiters
+ * @return : number of sequences generated
+ */
+
+ZSTDLIB_STATIC_API size_t ZSTD_generateSequences(ZSTD_CCtx* zc, ZSTD_Sequence* outSeqs,
+                                          size_t outSeqsSize, const void* src, size_t srcSize);
+
+/*! ZSTD_mergeBlockDelimiters() :
+ * Given an array of ZSTD_Sequence, remove all sequences that represent block delimiters/last literals
+ * by merging them into the literals of the next sequence.
+ *
+ * As such, the final generated result has no explicit representation of block boundaries,
+ * and the final last literals segment is not represented in the sequences.
+ *
+ * The output of this function can be fed into ZSTD_compressSequences() with CCtx
+ * setting of ZSTD_c_blockDelimiters as ZSTD_sf_noBlockDelimiters
+ * @return : number of sequences left after merging
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_mergeBlockDelimiters(ZSTD_Sequence* sequences, size_t seqsSize);
+
+/*! ZSTD_compressSequences() :
+ * Compress an array of ZSTD_Sequence, generated from the original source buffer, into dst.
+ * If a dictionary is included, then the cctx should reference the dict. (see: ZSTD_CCtx_refCDict(), ZSTD_CCtx_loadDictionary(), etc.)
+ * The entire source is compressed into a single frame.
+ *
+ * The compression behavior changes based on cctx params. In particular:
+ *    If ZSTD_c_blockDelimiters == ZSTD_sf_noBlockDelimiters, the array of ZSTD_Sequence is expected to contain
+ *    no block delimiters (defined in ZSTD_Sequence). Block boundaries are roughly determined based on
+ *    the block size derived from the cctx, and sequences may be split. This is the default setting.
+ *
+ *    If ZSTD_c_blockDelimiters == ZSTD_sf_explicitBlockDelimiters, the array of ZSTD_Sequence is expected to contain
+ *    block delimiters (defined in ZSTD_Sequence). Behavior is undefined if no block delimiters are provided.
+ *
+ *    If ZSTD_c_validateSequences == 0, this function will blindly accept the sequences provided. Invalid sequences cause undefined
+ *    behavior. If ZSTD_c_validateSequences == 1, then if sequence is invalid (see doc/zstd_compression_format.md for
+ *    specifics regarding offset/matchlength requirements) then the function will bail out and return an error.
+ *
+ *    In addition to the two adjustable experimental params, there are other important cctx params.
+ *    - ZSTD_c_minMatch MUST be set as less than or equal to the smallest match generated by the match finder. It has a minimum value of ZSTD_MINMATCH_MIN.
+ *    - ZSTD_c_compressionLevel accordingly adjusts the strength of the entropy coder, as it would in typical compression.
+ *    - ZSTD_c_windowLog affects offset validation: this function will return an error at higher debug levels if a provided offset
+ *      is larger than what the spec allows for a given window log and dictionary (if present). See: doc/zstd_compression_format.md
+ *
+ * Note: Repcodes are, as of now, always re-calculated within this function, so ZSTD_Sequence::rep is unused.
+ * Note 2: Once we integrate ability to ingest repcodes, the explicit block delims mode must respect those repcodes exactly,
+ *         and cannot emit an RLE block that disagrees with the repcode history
+ * @return : final compressed size or a ZSTD error.
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_compressSequences(ZSTD_CCtx* const cctx, void* dst, size_t dstSize,
+                                  const ZSTD_Sequence* inSeqs, size_t inSeqsSize,
+                                  const void* src, size_t srcSize);
+
+
+/*! ZSTD_writeSkippableFrame() :
+ * Generates a zstd skippable frame containing data given by src, and writes it to dst buffer.
+ *
+ * Skippable frames begin with a 4-byte magic number. There are 16 possible choices of magic number,
+ * ranging from ZSTD_MAGIC_SKIPPABLE_START to ZSTD_MAGIC_SKIPPABLE_START+15.
+ * As such, the parameter magicVariant controls the exact skippable frame magic number variant used, so
+ * the magic number used will be ZSTD_MAGIC_SKIPPABLE_START + magicVariant.
+ *
+ * Returns an error if destination buffer is not large enough, if the source size is not representable
+ * with a 4-byte unsigned int, or if the parameter magicVariant is greater than 15 (and therefore invalid).
+ *
+ * @return : number of bytes written or a ZSTD error.
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_writeSkippableFrame(void* dst, size_t dstCapacity,
+                                            const void* src, size_t srcSize, unsigned magicVariant);
+
+/*! ZSTD_readSkippableFrame() :
+ * Retrieves a zstd skippable frame containing data given by src, and writes it to dst buffer.
+ *
+ * The parameter magicVariant will receive the magicVariant that was supplied when the frame was written,
+ * i.e. magicNumber - ZSTD_MAGIC_SKIPPABLE_START.  This can be NULL if the caller is not interested
+ * in the magicVariant.
+ *
+ * Returns an error if destination buffer is not large enough, or if the frame is not skippable.
+ *
+ * @return : number of bytes written or a ZSTD error.
+ */
+ZSTDLIB_API size_t ZSTD_readSkippableFrame(void* dst, size_t dstCapacity, unsigned* magicVariant,
+                                            const void* src, size_t srcSize);
+
+/*! ZSTD_isSkippableFrame() :
+ *  Tells if the content of `buffer` starts with a valid Frame Identifier for a skippable frame.
+ */
+ZSTDLIB_API unsigned ZSTD_isSkippableFrame(const void* buffer, size_t size);
+
+
+
+/* *************************************
+*  Memory management
+***************************************/
+
+/*! ZSTD_estimate*() :
+ *  These functions make it possible to estimate memory usage
+ *  of a future {D,C}Ctx, before its creation.
+ *
+ *  ZSTD_estimateCCtxSize() will provide a memory budget large enough
+ *  for any compression level up to selected one.
+ *  Note : Unlike ZSTD_estimateCStreamSize*(), this estimate
+ *         does not include space for a window buffer.
+ *         Therefore, the estimation is only guaranteed for single-shot compressions, not streaming.
+ *  The estimate will assume the input may be arbitrarily large,
+ *  which is the worst case.
+ *
+ *  When srcSize can be bound by a known and rather "small" value,
+ *  this fact can be used to provide a tighter estimation
+ *  because the CCtx compression context will need less memory.
+ *  This tighter estimation can be provided by more advanced functions
+ *  ZSTD_estimateCCtxSize_usingCParams(), which can be used in tandem with ZSTD_getCParams(),
+ *  and ZSTD_estimateCCtxSize_usingCCtxParams(), which can be used in tandem with ZSTD_CCtxParams_setParameter().
+ *  Both can be used to estimate memory using custom compression parameters and arbitrary srcSize limits.
+ *
+ *  Note 2 : only single-threaded compression is supported.
+ *  ZSTD_estimateCCtxSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1.
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize(int compressionLevel);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize_usingCCtxParams(const ZSTD_CCtx_params* params);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateDCtxSize(void);
+
+/*! ZSTD_estimateCStreamSize() :
+ *  ZSTD_estimateCStreamSize() will provide a budget large enough for any compression level up to selected one.
+ *  It will also consider src size to be arbitrarily "large", which is worst case.
+ *  If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation.
+ *  ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel.
+ *  ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
+ *  Note : CStream size estimation is only correct for single-threaded compression.
+ *  ZSTD_DStream memory budget depends on window Size.
+ *  This information can be passed manually, using ZSTD_estimateDStreamSize,
+ *  or deducted from a valid frame Header, using ZSTD_estimateDStreamSize_fromFrame();
+ *  Note : if streaming is init with function ZSTD_init?Stream_usingDict(),
+ *         an internal ?Dict will be created, which additional size is not estimated here.
+ *         In this case, get total size by adding ZSTD_estimate?DictSize */
+ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize(int compressionLevel);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize_usingCParams(ZSTD_compressionParameters cParams);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize_usingCCtxParams(const ZSTD_CCtx_params* params);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize(size_t windowSize);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize_fromFrame(const void* src, size_t srcSize);
+
+/*! ZSTD_estimate?DictSize() :
+ *  ZSTD_estimateCDictSize() will bet that src size is relatively "small", and content is copied, like ZSTD_createCDict().
+ *  ZSTD_estimateCDictSize_advanced() makes it possible to control compression parameters precisely, like ZSTD_createCDict_advanced().
+ *  Note : dictionaries created by reference (`ZSTD_dlm_byRef`) are logically smaller.
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_estimateCDictSize(size_t dictSize, int compressionLevel);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateCDictSize_advanced(size_t dictSize, ZSTD_compressionParameters cParams, ZSTD_dictLoadMethod_e dictLoadMethod);
+ZSTDLIB_STATIC_API size_t ZSTD_estimateDDictSize(size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod);
+
+/*! ZSTD_initStatic*() :
+ *  Initialize an object using a pre-allocated fixed-size buffer.
+ *  workspace: The memory area to emplace the object into.
+ *             Provided pointer *must be 8-bytes aligned*.
+ *             Buffer must outlive object.
+ *  workspaceSize: Use ZSTD_estimate*Size() to determine
+ *                 how large workspace must be to support target scenario.
+ * @return : pointer to object (same address as workspace, just different type),
+ *           or NULL if error (size too small, incorrect alignment, etc.)
+ *  Note : zstd will never resize nor malloc() when using a static buffer.
+ *         If the object requires more memory than available,
+ *         zstd will just error out (typically ZSTD_error_memory_allocation).
+ *  Note 2 : there is no corresponding "free" function.
+ *           Since workspace is allocated externally, it must be freed externally too.
+ *  Note 3 : cParams : use ZSTD_getCParams() to convert a compression level
+ *           into its associated cParams.
+ *  Limitation 1 : currently not compatible with internal dictionary creation, triggered by
+ *                 ZSTD_CCtx_loadDictionary(), ZSTD_initCStream_usingDict() or ZSTD_initDStream_usingDict().
+ *  Limitation 2 : static cctx currently not compatible with multi-threading.
+ *  Limitation 3 : static dctx is incompatible with legacy support.
+ */
+ZSTDLIB_STATIC_API ZSTD_CCtx*    ZSTD_initStaticCCtx(void* workspace, size_t workspaceSize);
+ZSTDLIB_STATIC_API ZSTD_CStream* ZSTD_initStaticCStream(void* workspace, size_t workspaceSize);    /*< same as ZSTD_initStaticCCtx() */
+
+ZSTDLIB_STATIC_API ZSTD_DCtx*    ZSTD_initStaticDCtx(void* workspace, size_t workspaceSize);
+ZSTDLIB_STATIC_API ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize);    /*< same as ZSTD_initStaticDCtx() */
+
+ZSTDLIB_STATIC_API const ZSTD_CDict* ZSTD_initStaticCDict(
+                                        void* workspace, size_t workspaceSize,
+                                        const void* dict, size_t dictSize,
+                                        ZSTD_dictLoadMethod_e dictLoadMethod,
+                                        ZSTD_dictContentType_e dictContentType,
+                                        ZSTD_compressionParameters cParams);
+
+ZSTDLIB_STATIC_API const ZSTD_DDict* ZSTD_initStaticDDict(
+                                        void* workspace, size_t workspaceSize,
+                                        const void* dict, size_t dictSize,
+                                        ZSTD_dictLoadMethod_e dictLoadMethod,
+                                        ZSTD_dictContentType_e dictContentType);
+
+
+/*! Custom memory allocation :
+ *  These prototypes make it possible to pass your own allocation/free functions.
+ *  ZSTD_customMem is provided at creation time, using ZSTD_create*_advanced() variants listed below.
+ *  All allocation/free operations will be completed using these custom variants instead of regular <stdlib.h> ones.
+ */
+typedef void* (*ZSTD_allocFunction) (void* opaque, size_t size);
+typedef void  (*ZSTD_freeFunction) (void* opaque, void* address);
+typedef struct { ZSTD_allocFunction customAlloc; ZSTD_freeFunction customFree; void* opaque; } ZSTD_customMem;
+static
+__attribute__((__unused__))
+ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL };  /*< this constant defers to stdlib's functions */
+
+ZSTDLIB_STATIC_API ZSTD_CCtx*    ZSTD_createCCtx_advanced(ZSTD_customMem customMem);
+ZSTDLIB_STATIC_API ZSTD_CStream* ZSTD_createCStream_advanced(ZSTD_customMem customMem);
+ZSTDLIB_STATIC_API ZSTD_DCtx*    ZSTD_createDCtx_advanced(ZSTD_customMem customMem);
+ZSTDLIB_STATIC_API ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem);
+
+ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_advanced(const void* dict, size_t dictSize,
+                                                  ZSTD_dictLoadMethod_e dictLoadMethod,
+                                                  ZSTD_dictContentType_e dictContentType,
+                                                  ZSTD_compressionParameters cParams,
+                                                  ZSTD_customMem customMem);
+
+/*! Thread pool :
+ *  These prototypes make it possible to share a thread pool among multiple compression contexts.
+ *  This can limit resources for applications with multiple threads where each one uses
+ *  a threaded compression mode (via ZSTD_c_nbWorkers parameter).
+ *  ZSTD_createThreadPool creates a new thread pool with a given number of threads.
+ *  Note that the lifetime of such pool must exist while being used.
+ *  ZSTD_CCtx_refThreadPool assigns a thread pool to a context (use NULL argument value
+ *  to use an internal thread pool).
+ *  ZSTD_freeThreadPool frees a thread pool, accepts NULL pointer.
+ */
+typedef struct POOL_ctx_s ZSTD_threadPool;
+ZSTDLIB_STATIC_API ZSTD_threadPool* ZSTD_createThreadPool(size_t numThreads);
+ZSTDLIB_STATIC_API void ZSTD_freeThreadPool (ZSTD_threadPool* pool);  /* accept NULL pointer */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtx_refThreadPool(ZSTD_CCtx* cctx, ZSTD_threadPool* pool);
+
+
+/*
+ * This API is temporary and is expected to change or disappear in the future!
+ */
+ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_advanced2(
+    const void* dict, size_t dictSize,
+    ZSTD_dictLoadMethod_e dictLoadMethod,
+    ZSTD_dictContentType_e dictContentType,
+    const ZSTD_CCtx_params* cctxParams,
+    ZSTD_customMem customMem);
+
+ZSTDLIB_STATIC_API ZSTD_DDict* ZSTD_createDDict_advanced(
+    const void* dict, size_t dictSize,
+    ZSTD_dictLoadMethod_e dictLoadMethod,
+    ZSTD_dictContentType_e dictContentType,
+    ZSTD_customMem customMem);
+
+
+/* *************************************
+*  Advanced compression functions
+***************************************/
+
+/*! ZSTD_createCDict_byReference() :
+ *  Create a digested dictionary for compression
+ *  Dictionary content is just referenced, not duplicated.
+ *  As a consequence, `dictBuffer` **must** outlive CDict,
+ *  and its content must remain unmodified throughout the lifetime of CDict.
+ *  note: equivalent to ZSTD_createCDict_advanced(), with dictLoadMethod==ZSTD_dlm_byRef */
+ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel);
+
+/*! ZSTD_getCParams() :
+ * @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize.
+ * `estimatedSrcSize` value is optional, select 0 if not known */
+ZSTDLIB_STATIC_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize);
+
+/*! ZSTD_getParams() :
+ *  same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`.
+ *  All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */
+ZSTDLIB_STATIC_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize);
+
+/*! ZSTD_checkCParams() :
+ *  Ensure param values remain within authorized range.
+ * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */
+ZSTDLIB_STATIC_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params);
+
+/*! ZSTD_adjustCParams() :
+ *  optimize params for a given `srcSize` and `dictSize`.
+ * `srcSize` can be unknown, in which case use ZSTD_CONTENTSIZE_UNKNOWN.
+ * `dictSize` must be `0` when there is no dictionary.
+ *  cPar can be invalid : all parameters will be clamped within valid range in the @return struct.
+ *  This function never fails (wide contract) */
+ZSTDLIB_STATIC_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize);
+
+/*! ZSTD_compress_advanced() :
+ *  Note : this function is now DEPRECATED.
+ *         It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_setParameter() and other parameter setters.
+ *  This prototype will generate compilation warnings. */
+ZSTD_DEPRECATED("use ZSTD_compress2")
+size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx,
+                                          void* dst, size_t dstCapacity,
+                                    const void* src, size_t srcSize,
+                                    const void* dict,size_t dictSize,
+                                          ZSTD_parameters params);
+
+/*! ZSTD_compress_usingCDict_advanced() :
+ *  Note : this function is now DEPRECATED.
+ *         It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_loadDictionary() and other parameter setters.
+ *  This prototype will generate compilation warnings. */
+ZSTD_DEPRECATED("use ZSTD_compress2 with ZSTD_CCtx_loadDictionary")
+size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx,
+                                              void* dst, size_t dstCapacity,
+                                        const void* src, size_t srcSize,
+                                        const ZSTD_CDict* cdict,
+                                              ZSTD_frameParameters fParams);
+
+
+/*! ZSTD_CCtx_loadDictionary_byReference() :
+ *  Same as ZSTD_CCtx_loadDictionary(), but dictionary content is referenced, instead of being copied into CCtx.
+ *  It saves some memory, but also requires that `dict` outlives its usage within `cctx` */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_CCtx_loadDictionary_advanced() :
+ *  Same as ZSTD_CCtx_loadDictionary(), but gives finer control over
+ *  how to load the dictionary (by copy ? by reference ?)
+ *  and how to interpret it (automatic ? force raw mode ? full mode only ?) */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType);
+
+/*! ZSTD_CCtx_refPrefix_advanced() :
+ *  Same as ZSTD_CCtx_refPrefix(), but gives finer control over
+ *  how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType);
+
+/* ===   experimental parameters   === */
+/* these parameters can be used with ZSTD_setParameter()
+ * they are not guaranteed to remain supported in the future */
+
+ /* Enables rsyncable mode,
+  * which makes compressed files more rsync friendly
+  * by adding periodic synchronization points to the compressed data.
+  * The target average block size is ZSTD_c_jobSize / 2.
+  * It's possible to modify the job size to increase or decrease
+  * the granularity of the synchronization point.
+  * Once the jobSize is smaller than the window size,
+  * it will result in compression ratio degradation.
+  * NOTE 1: rsyncable mode only works when multithreading is enabled.
+  * NOTE 2: rsyncable performs poorly in combination with long range mode,
+  * since it will decrease the effectiveness of synchronization points,
+  * though mileage may vary.
+  * NOTE 3: Rsyncable mode limits maximum compression speed to ~400 MB/s.
+  * If the selected compression level is already running significantly slower,
+  * the overall speed won't be significantly impacted.
+  */
+ #define ZSTD_c_rsyncable ZSTD_c_experimentalParam1
+
+/* Select a compression format.
+ * The value must be of type ZSTD_format_e.
+ * See ZSTD_format_e enum definition for details */
+#define ZSTD_c_format ZSTD_c_experimentalParam2
+
+/* Force back-reference distances to remain < windowSize,
+ * even when referencing into Dictionary content (default:0) */
+#define ZSTD_c_forceMaxWindow ZSTD_c_experimentalParam3
+
+/* Controls whether the contents of a CDict
+ * are used in place, or copied into the working context.
+ * Accepts values from the ZSTD_dictAttachPref_e enum.
+ * See the comments on that enum for an explanation of the feature. */
+#define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4
+
+/* Controlled with ZSTD_paramSwitch_e enum.
+ * Default is ZSTD_ps_auto.
+ * Set to ZSTD_ps_disable to never compress literals.
+ * Set to ZSTD_ps_enable to always compress literals. (Note: uncompressed literals
+ * may still be emitted if huffman is not beneficial to use.)
+ *
+ * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use
+ * literals compression based on the compression parameters - specifically,
+ * negative compression levels do not use literal compression.
+ */
+#define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5
+
+/* Tries to fit compressed block size to be around targetCBlockSize.
+ * No target when targetCBlockSize == 0.
+ * There is no guarantee on compressed block size (default:0) */
+#define ZSTD_c_targetCBlockSize ZSTD_c_experimentalParam6
+
+/* User's best guess of source size.
+ * Hint is not valid when srcSizeHint == 0.
+ * There is no guarantee that hint is close to actual source size,
+ * but compression ratio may regress significantly if guess considerably underestimates */
+#define ZSTD_c_srcSizeHint ZSTD_c_experimentalParam7
+
+/* Controls whether the new and experimental "dedicated dictionary search
+ * structure" can be used. This feature is still rough around the edges, be
+ * prepared for surprising behavior!
+ *
+ * How to use it:
+ *
+ * When using a CDict, whether to use this feature or not is controlled at
+ * CDict creation, and it must be set in a CCtxParams set passed into that
+ * construction (via ZSTD_createCDict_advanced2()). A compression will then
+ * use the feature or not based on how the CDict was constructed; the value of
+ * this param, set in the CCtx, will have no effect.
+ *
+ * However, when a dictionary buffer is passed into a CCtx, such as via
+ * ZSTD_CCtx_loadDictionary(), this param can be set on the CCtx to control
+ * whether the CDict that is created internally can use the feature or not.
+ *
+ * What it does:
+ *
+ * Normally, the internal data structures of the CDict are analogous to what
+ * would be stored in a CCtx after compressing the contents of a dictionary.
+ * To an approximation, a compression using a dictionary can then use those
+ * data structures to simply continue what is effectively a streaming
+ * compression where the simulated compression of the dictionary left off.
+ * Which is to say, the search structures in the CDict are normally the same
+ * format as in the CCtx.
+ *
+ * It is possible to do better, since the CDict is not like a CCtx: the search
+ * structures are written once during CDict creation, and then are only read
+ * after that, while the search structures in the CCtx are both read and
+ * written as the compression goes along. This means we can choose a search
+ * structure for the dictionary that is read-optimized.
+ *
+ * This feature enables the use of that different structure.
+ *
+ * Note that some of the members of the ZSTD_compressionParameters struct have
+ * different semantics and constraints in the dedicated search structure. It is
+ * highly recommended that you simply set a compression level in the CCtxParams
+ * you pass into the CDict creation call, and avoid messing with the cParams
+ * directly.
+ *
+ * Effects:
+ *
+ * This will only have any effect when the selected ZSTD_strategy
+ * implementation supports this feature. Currently, that's limited to
+ * ZSTD_greedy, ZSTD_lazy, and ZSTD_lazy2.
+ *
+ * Note that this means that the CDict tables can no longer be copied into the
+ * CCtx, so the dict attachment mode ZSTD_dictForceCopy will no longer be
+ * usable. The dictionary can only be attached or reloaded.
+ *
+ * In general, you should expect compression to be faster--sometimes very much
+ * so--and CDict creation to be slightly slower. Eventually, we will probably
+ * make this mode the default.
+ */
+#define ZSTD_c_enableDedicatedDictSearch ZSTD_c_experimentalParam8
+
+/* ZSTD_c_stableInBuffer
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable.
+ *
+ * Tells the compressor that the ZSTD_inBuffer will ALWAYS be the same
+ * between calls, except for the modifications that zstd makes to pos (the
+ * caller must not modify pos). This is checked by the compressor, and
+ * compression will fail if it ever changes. This means the only flush
+ * mode that makes sense is ZSTD_e_end, so zstd will error if ZSTD_e_end
+ * is not used. The data in the ZSTD_inBuffer in the range [src, src + pos)
+ * MUST not be modified during compression or you will get data corruption.
+ *
+ * When this flag is enabled zstd won't allocate an input window buffer,
+ * because the user guarantees it can reference the ZSTD_inBuffer until
+ * the frame is complete. But, it will still allocate an output buffer
+ * large enough to fit a block (see ZSTD_c_stableOutBuffer). This will also
+ * avoid the memcpy() from the input buffer to the input window buffer.
+ *
+ * NOTE: ZSTD_compressStream2() will error if ZSTD_e_end is not used.
+ * That means this flag cannot be used with ZSTD_compressStream().
+ *
+ * NOTE: So long as the ZSTD_inBuffer always points to valid memory, using
+ * this flag is ALWAYS memory safe, and will never access out-of-bounds
+ * memory. However, compression WILL fail if you violate the preconditions.
+ *
+ * WARNING: The data in the ZSTD_inBuffer in the range [dst, dst + pos) MUST
+ * not be modified during compression or you will get data corruption. This
+ * is because zstd needs to reference data in the ZSTD_inBuffer to find
+ * matches. Normally zstd maintains its own window buffer for this purpose,
+ * but passing this flag tells zstd to use the user provided buffer.
+ */
+#define ZSTD_c_stableInBuffer ZSTD_c_experimentalParam9
+
+/* ZSTD_c_stableOutBuffer
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable.
+ *
+ * Tells he compressor that the ZSTD_outBuffer will not be resized between
+ * calls. Specifically: (out.size - out.pos) will never grow. This gives the
+ * compressor the freedom to say: If the compressed data doesn't fit in the
+ * output buffer then return ZSTD_error_dstSizeTooSmall. This allows us to
+ * always decompress directly into the output buffer, instead of decompressing
+ * into an internal buffer and copying to the output buffer.
+ *
+ * When this flag is enabled zstd won't allocate an output buffer, because
+ * it can write directly to the ZSTD_outBuffer. It will still allocate the
+ * input window buffer (see ZSTD_c_stableInBuffer).
+ *
+ * Zstd will check that (out.size - out.pos) never grows and return an error
+ * if it does. While not strictly necessary, this should prevent surprises.
+ */
+#define ZSTD_c_stableOutBuffer ZSTD_c_experimentalParam10
+
+/* ZSTD_c_blockDelimiters
+ * Default is 0 == ZSTD_sf_noBlockDelimiters.
+ *
+ * For use with sequence compression API: ZSTD_compressSequences().
+ *
+ * Designates whether or not the given array of ZSTD_Sequence contains block delimiters
+ * and last literals, which are defined as sequences with offset == 0 and matchLength == 0.
+ * See the definition of ZSTD_Sequence for more specifics.
+ */
+#define ZSTD_c_blockDelimiters ZSTD_c_experimentalParam11
+
+/* ZSTD_c_validateSequences
+ * Default is 0 == disabled. Set to 1 to enable sequence validation.
+ *
+ * For use with sequence compression API: ZSTD_compressSequences().
+ * Designates whether or not we validate sequences provided to ZSTD_compressSequences()
+ * during function execution.
+ *
+ * Without validation, providing a sequence that does not conform to the zstd spec will cause
+ * undefined behavior, and may produce a corrupted block.
+ *
+ * With validation enabled, a if sequence is invalid (see doc/zstd_compression_format.md for
+ * specifics regarding offset/matchlength requirements) then the function will bail out and
+ * return an error.
+ *
+ */
+#define ZSTD_c_validateSequences ZSTD_c_experimentalParam12
+
+/* ZSTD_c_useBlockSplitter
+ * Controlled with ZSTD_paramSwitch_e enum.
+ * Default is ZSTD_ps_auto.
+ * Set to ZSTD_ps_disable to never use block splitter.
+ * Set to ZSTD_ps_enable to always use block splitter.
+ *
+ * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use
+ * block splitting based on the compression parameters.
+ */
+#define ZSTD_c_useBlockSplitter ZSTD_c_experimentalParam13
+
+/* ZSTD_c_useRowMatchFinder
+ * Controlled with ZSTD_paramSwitch_e enum.
+ * Default is ZSTD_ps_auto.
+ * Set to ZSTD_ps_disable to never use row-based matchfinder.
+ * Set to ZSTD_ps_enable to force usage of row-based matchfinder.
+ *
+ * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use
+ * the row-based matchfinder based on support for SIMD instructions and the window log.
+ * Note that this only pertains to compression strategies: greedy, lazy, and lazy2
+ */
+#define ZSTD_c_useRowMatchFinder ZSTD_c_experimentalParam14
+
+/* ZSTD_c_deterministicRefPrefix
+ * Default is 0 == disabled. Set to 1 to enable.
+ *
+ * Zstd produces different results for prefix compression when the prefix is
+ * directly adjacent to the data about to be compressed vs. when it isn't.
+ * This is because zstd detects that the two buffers are contiguous and it can
+ * use a more efficient match finding algorithm. However, this produces different
+ * results than when the two buffers are non-contiguous. This flag forces zstd
+ * to always load the prefix in non-contiguous mode, even if it happens to be
+ * adjacent to the data, to guarantee determinism.
+ *
+ * If you really care about determinism when using a dictionary or prefix,
+ * like when doing delta compression, you should select this option. It comes
+ * at a speed penalty of about ~2.5% if the dictionary and data happened to be
+ * contiguous, and is free if they weren't contiguous. We don't expect that
+ * intentionally making the dictionary and data contiguous will be worth the
+ * cost to memcpy() the data.
+ */
+#define ZSTD_c_deterministicRefPrefix ZSTD_c_experimentalParam15
+
+/*! ZSTD_CCtx_getParameter() :
+ *  Get the requested compression parameter value, selected by enum ZSTD_cParameter,
+ *  and store it into int* value.
+ * @return : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtx_getParameter(const ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value);
+
+
+/*! ZSTD_CCtx_params :
+ *  Quick howto :
+ *  - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure
+ *  - ZSTD_CCtxParams_setParameter() : Push parameters one by one into
+ *                                     an existing ZSTD_CCtx_params structure.
+ *                                     This is similar to
+ *                                     ZSTD_CCtx_setParameter().
+ *  - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to
+ *                                    an existing CCtx.
+ *                                    These parameters will be applied to
+ *                                    all subsequent frames.
+ *  - ZSTD_compressStream2() : Do compression using the CCtx.
+ *  - ZSTD_freeCCtxParams() : Free the memory, accept NULL pointer.
+ *
+ *  This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams()
+ *  for static allocation of CCtx for single-threaded compression.
+ */
+ZSTDLIB_STATIC_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void);
+ZSTDLIB_STATIC_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params);  /* accept NULL pointer */
+
+/*! ZSTD_CCtxParams_reset() :
+ *  Reset params to default values.
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params);
+
+/*! ZSTD_CCtxParams_init() :
+ *  Initializes the compression parameters of cctxParams according to
+ *  compression level. All other parameters are reset to their default values.
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel);
+
+/*! ZSTD_CCtxParams_init_advanced() :
+ *  Initializes the compression and frame parameters of cctxParams according to
+ *  params. All other parameters are reset to their default values.
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params);
+
+/*! ZSTD_CCtxParams_setParameter() : Requires v1.4.0+
+ *  Similar to ZSTD_CCtx_setParameter.
+ *  Set one compression parameter, selected by enum ZSTD_cParameter.
+ *  Parameters must be applied to a ZSTD_CCtx using
+ *  ZSTD_CCtx_setParametersUsingCCtxParams().
+ * @result : a code representing success or failure (which can be tested with
+ *           ZSTD_isError()).
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value);
+
+/*! ZSTD_CCtxParams_getParameter() :
+ * Similar to ZSTD_CCtx_getParameter.
+ * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_getParameter(const ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value);
+
+/*! ZSTD_CCtx_setParametersUsingCCtxParams() :
+ *  Apply a set of ZSTD_CCtx_params to the compression context.
+ *  This can be done even after compression is started,
+ *    if nbWorkers==0, this will have no impact until a new compression is started.
+ *    if nbWorkers>=1, new parameters will be picked up at next job,
+ *       with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated).
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setParametersUsingCCtxParams(
+        ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params);
+
+/*! ZSTD_compressStream2_simpleArgs() :
+ *  Same as ZSTD_compressStream2(),
+ *  but using only integral types as arguments.
+ *  This variant might be helpful for binders from dynamic languages
+ *  which have troubles handling structures containing memory pointers.
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_compressStream2_simpleArgs (
+                            ZSTD_CCtx* cctx,
+                            void* dst, size_t dstCapacity, size_t* dstPos,
+                      const void* src, size_t srcSize, size_t* srcPos,
+                            ZSTD_EndDirective endOp);
+
+
+/* *************************************
+*  Advanced decompression functions
+***************************************/
+
+/*! ZSTD_isFrame() :
+ *  Tells if the content of `buffer` starts with a valid Frame Identifier.
+ *  Note : Frame Identifier is 4 bytes. If `size < 4`, @return will always be 0.
+ *  Note 2 : Legacy Frame Identifiers are considered valid only if Legacy Support is enabled.
+ *  Note 3 : Skippable Frame Identifiers are considered valid. */
+ZSTDLIB_STATIC_API unsigned ZSTD_isFrame(const void* buffer, size_t size);
+
+/*! ZSTD_createDDict_byReference() :
+ *  Create a digested dictionary, ready to start decompression operation without startup delay.
+ *  Dictionary content is referenced, and therefore stays in dictBuffer.
+ *  It is important that dictBuffer outlives DDict,
+ *  it must remain read accessible throughout the lifetime of DDict */
+ZSTDLIB_STATIC_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize);
+
+/*! ZSTD_DCtx_loadDictionary_byReference() :
+ *  Same as ZSTD_DCtx_loadDictionary(),
+ *  but references `dict` content instead of copying it into `dctx`.
+ *  This saves memory if `dict` remains around.,
+ *  However, it's imperative that `dict` remains accessible (and unmodified) while being used, so it must outlive decompression. */
+ZSTDLIB_STATIC_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_DCtx_loadDictionary_advanced() :
+ *  Same as ZSTD_DCtx_loadDictionary(),
+ *  but gives direct control over
+ *  how to load the dictionary (by copy ? by reference ?)
+ *  and how to interpret it (automatic ? force raw mode ? full mode only ?). */
+ZSTDLIB_STATIC_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType);
+
+/*! ZSTD_DCtx_refPrefix_advanced() :
+ *  Same as ZSTD_DCtx_refPrefix(), but gives finer control over
+ *  how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */
+ZSTDLIB_STATIC_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType);
+
+/*! ZSTD_DCtx_setMaxWindowSize() :
+ *  Refuses allocating internal buffers for frames requiring a window size larger than provided limit.
+ *  This protects a decoder context from reserving too much memory for itself (potential attack scenario).
+ *  This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode.
+ *  By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT)
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize);
+
+/*! ZSTD_DCtx_getParameter() :
+ *  Get the requested decompression parameter value, selected by enum ZSTD_dParameter,
+ *  and store it into int* value.
+ * @return : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_DCtx_getParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int* value);
+
+/* ZSTD_d_format
+ * experimental parameter,
+ * allowing selection between ZSTD_format_e input compression formats
+ */
+#define ZSTD_d_format ZSTD_d_experimentalParam1
+/* ZSTD_d_stableOutBuffer
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable.
+ *
+ * Tells the decompressor that the ZSTD_outBuffer will ALWAYS be the same
+ * between calls, except for the modifications that zstd makes to pos (the
+ * caller must not modify pos). This is checked by the decompressor, and
+ * decompression will fail if it ever changes. Therefore the ZSTD_outBuffer
+ * MUST be large enough to fit the entire decompressed frame. This will be
+ * checked when the frame content size is known. The data in the ZSTD_outBuffer
+ * in the range [dst, dst + pos) MUST not be modified during decompression
+ * or you will get data corruption.
+ *
+ * When this flags is enabled zstd won't allocate an output buffer, because
+ * it can write directly to the ZSTD_outBuffer, but it will still allocate
+ * an input buffer large enough to fit any compressed block. This will also
+ * avoid the memcpy() from the internal output buffer to the ZSTD_outBuffer.
+ * If you need to avoid the input buffer allocation use the buffer-less
+ * streaming API.
+ *
+ * NOTE: So long as the ZSTD_outBuffer always points to valid memory, using
+ * this flag is ALWAYS memory safe, and will never access out-of-bounds
+ * memory. However, decompression WILL fail if you violate the preconditions.
+ *
+ * WARNING: The data in the ZSTD_outBuffer in the range [dst, dst + pos) MUST
+ * not be modified during decompression or you will get data corruption. This
+ * is because zstd needs to reference data in the ZSTD_outBuffer to regenerate
+ * matches. Normally zstd maintains its own buffer for this purpose, but passing
+ * this flag tells zstd to use the user provided buffer.
+ */
+#define ZSTD_d_stableOutBuffer ZSTD_d_experimentalParam2
+
+/* ZSTD_d_forceIgnoreChecksum
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable
+ *
+ * Tells the decompressor to skip checksum validation during decompression, regardless
+ * of whether checksumming was specified during compression. This offers some
+ * slight performance benefits, and may be useful for debugging.
+ * Param has values of type ZSTD_forceIgnoreChecksum_e
+ */
+#define ZSTD_d_forceIgnoreChecksum ZSTD_d_experimentalParam3
+
+/* ZSTD_d_refMultipleDDicts
+ * Experimental parameter.
+ * Default is 0 == disabled. Set to 1 to enable
+ *
+ * If enabled and dctx is allocated on the heap, then additional memory will be allocated
+ * to store references to multiple ZSTD_DDict. That is, multiple calls of ZSTD_refDDict()
+ * using a given ZSTD_DCtx, rather than overwriting the previous DDict reference, will instead
+ * store all references. At decompression time, the appropriate dictID is selected
+ * from the set of DDicts based on the dictID in the frame.
+ *
+ * Usage is simply calling ZSTD_refDDict() on multiple dict buffers.
+ *
+ * Param has values of byte ZSTD_refMultipleDDicts_e
+ *
+ * WARNING: Enabling this parameter and calling ZSTD_DCtx_refDDict(), will trigger memory
+ * allocation for the hash table. ZSTD_freeDCtx() also frees this memory.
+ * Memory is allocated as per ZSTD_DCtx::customMem.
+ *
+ * Although this function allocates memory for the table, the user is still responsible for
+ * memory management of the underlying ZSTD_DDict* themselves.
+ */
+#define ZSTD_d_refMultipleDDicts ZSTD_d_experimentalParam4
+
+
+/*! ZSTD_DCtx_setFormat() :
+ *  This function is REDUNDANT. Prefer ZSTD_DCtx_setParameter().
+ *  Instruct the decoder context about what kind of data to decode next.
+ *  This instruction is mandatory to decode data without a fully-formed header,
+ *  such ZSTD_f_zstd1_magicless for example.
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()). */
+ZSTD_DEPRECATED("use ZSTD_DCtx_setParameter() instead")
+size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format);
+
+/*! ZSTD_decompressStream_simpleArgs() :
+ *  Same as ZSTD_decompressStream(),
+ *  but using only integral types as arguments.
+ *  This can be helpful for binders from dynamic languages
+ *  which have troubles handling structures containing memory pointers.
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_decompressStream_simpleArgs (
+                            ZSTD_DCtx* dctx,
+                            void* dst, size_t dstCapacity, size_t* dstPos,
+                      const void* src, size_t srcSize, size_t* srcPos);
+
+
+/* ******************************************************************
+*  Advanced streaming functions
+*  Warning : most of these functions are now redundant with the Advanced API.
+*  Once Advanced API reaches "stable" status,
+*  redundant functions will be deprecated, and then at some point removed.
+********************************************************************/
+
+/*=====   Advanced Streaming compression functions  =====*/
+
+/*! ZSTD_initCStream_srcSize() :
+ * This function is DEPRECATED, and equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any)
+ *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *
+ * pledgedSrcSize must be correct. If it is not known at init time, use
+ * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs,
+ * "0" also disables frame content size field. It may be enabled in the future.
+ * This prototype will generate compilation warnings.
+ */
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions")
+size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs,
+                         int compressionLevel,
+                         unsigned long long pledgedSrcSize);
+
+/*! ZSTD_initCStream_usingDict() :
+ * This function is DEPRECATED, and is equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel);
+ *     ZSTD_CCtx_loadDictionary(zcs, dict, dictSize);
+ *
+ * Creates of an internal CDict (incompatible with static CCtx), except if
+ * dict == NULL or dictSize < 8, in which case no dict is used.
+ * Note: dict is loaded with ZSTD_dct_auto (treated as a full zstd dictionary if
+ * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy.
+ * This prototype will generate compilation warnings.
+ */
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions")
+size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs,
+                     const void* dict, size_t dictSize,
+                           int compressionLevel);
+
+/*! ZSTD_initCStream_advanced() :
+ * This function is DEPRECATED, and is approximately equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     // Pseudocode: Set each zstd parameter and leave the rest as-is.
+ *     for ((param, value) : params) {
+ *         ZSTD_CCtx_setParameter(zcs, param, value);
+ *     }
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *     ZSTD_CCtx_loadDictionary(zcs, dict, dictSize);
+ *
+ * dict is loaded with ZSTD_dct_auto and ZSTD_dlm_byCopy.
+ * pledgedSrcSize must be correct.
+ * If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN.
+ * This prototype will generate compilation warnings.
+ */
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions")
+size_t ZSTD_initCStream_advanced(ZSTD_CStream* zcs,
+                    const void* dict, size_t dictSize,
+                          ZSTD_parameters params,
+                          unsigned long long pledgedSrcSize);
+
+/*! ZSTD_initCStream_usingCDict() :
+ * This function is DEPRECATED, and equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_refCDict(zcs, cdict);
+ *
+ * note : cdict will just be referenced, and must outlive compression session
+ * This prototype will generate compilation warnings.
+ */
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset and ZSTD_CCtx_refCDict, see zstd.h for detailed instructions")
+size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict);
+
+/*! ZSTD_initCStream_usingCDict_advanced() :
+ *   This function is DEPRECATED, and is approximately equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     // Pseudocode: Set each zstd frame parameter and leave the rest as-is.
+ *     for ((fParam, value) : fParams) {
+ *         ZSTD_CCtx_setParameter(zcs, fParam, value);
+ *     }
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ *     ZSTD_CCtx_refCDict(zcs, cdict);
+ *
+ * same as ZSTD_initCStream_usingCDict(), with control over frame parameters.
+ * pledgedSrcSize must be correct. If srcSize is not known at init time, use
+ * value ZSTD_CONTENTSIZE_UNKNOWN.
+ * This prototype will generate compilation warnings.
+ */
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset and ZSTD_CCtx_refCDict, see zstd.h for detailed instructions")
+size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs,
+                               const ZSTD_CDict* cdict,
+                                     ZSTD_frameParameters fParams,
+                                     unsigned long long pledgedSrcSize);
+
+/*! ZSTD_resetCStream() :
+ * This function is DEPRECATED, and is equivalent to:
+ *     ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only);
+ *     ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize);
+ * Note: ZSTD_resetCStream() interprets pledgedSrcSize == 0 as ZSTD_CONTENTSIZE_UNKNOWN, but
+ *       ZSTD_CCtx_setPledgedSrcSize() does not do the same, so ZSTD_CONTENTSIZE_UNKNOWN must be
+ *       explicitly specified.
+ *
+ *  start a new frame, using same parameters from previous frame.
+ *  This is typically useful to skip dictionary loading stage, since it will re-use it in-place.
+ *  Note that zcs must be init at least once before using ZSTD_resetCStream().
+ *  If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN.
+ *  If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end.
+ *  For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs,
+ *  but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead.
+ * @return : 0, or an error code (which can be tested using ZSTD_isError())
+ *  This prototype will generate compilation warnings.
+ */
+ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions")
+size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize);
+
+
+typedef struct {
+    unsigned long long ingested;   /* nb input bytes read and buffered */
+    unsigned long long consumed;   /* nb input bytes actually compressed */
+    unsigned long long produced;   /* nb of compressed bytes generated and buffered */
+    unsigned long long flushed;    /* nb of compressed bytes flushed : not provided; can be tracked from caller side */
+    unsigned currentJobID;         /* MT only : latest started job nb */
+    unsigned nbActiveWorkers;      /* MT only : nb of workers actively compressing at probe time */
+} ZSTD_frameProgression;
+
+/* ZSTD_getFrameProgression() :
+ * tells how much data has been ingested (read from input)
+ * consumed (input actually compressed) and produced (output) for current frame.
+ * Note : (ingested - consumed) is amount of input data buffered internally, not yet compressed.
+ * Aggregates progression inside active worker threads.
+ */
+ZSTDLIB_STATIC_API ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx);
+
+/*! ZSTD_toFlushNow() :
+ *  Tell how many bytes are ready to be flushed immediately.
+ *  Useful for multithreading scenarios (nbWorkers >= 1).
+ *  Probe the oldest active job, defined as oldest job not yet entirely flushed,
+ *  and check its output buffer.
+ * @return : amount of data stored in oldest job and ready to be flushed immediately.
+ *  if @return == 0, it means either :
+ *  + there is no active job (could be checked with ZSTD_frameProgression()), or
+ *  + oldest job is still actively compressing data,
+ *    but everything it has produced has also been flushed so far,
+ *    therefore flush speed is limited by production speed of oldest job
+ *    irrespective of the speed of concurrent (and newer) jobs.
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx);
+
+
+/*=====   Advanced Streaming decompression functions  =====*/
+
+/*!
+ * This function is deprecated, and is equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *     ZSTD_DCtx_loadDictionary(zds, dict, dictSize);
+ *
+ * note: no dictionary will be used if dict == NULL or dictSize < 8
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize);
+
+/*!
+ * This function is deprecated, and is equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *     ZSTD_DCtx_refDDict(zds, ddict);
+ *
+ * note : ddict is referenced, it must outlive decompression session
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);
+
+/*!
+ * This function is deprecated, and is equivalent to:
+ *
+ *     ZSTD_DCtx_reset(zds, ZSTD_reset_session_only);
+ *
+ * re-use decompression parameters from previous init; saves dictionary loading
+ * Note : this prototype will be marked as deprecated and generate compilation warnings on reaching v1.5.x
+ */
+ZSTDLIB_STATIC_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);
+
+
+/* *******************************************************************
+*  Buffer-less and synchronous inner streaming functions
+*
+*  This is an advanced API, giving full control over buffer management, for users which need direct control over memory.
+*  But it's also a complex one, with several restrictions, documented below.
+*  Prefer normal streaming API for an easier experience.
+********************************************************************* */
+
+/*
+  Buffer-less streaming compression (synchronous mode)
+
+  A ZSTD_CCtx object is required to track streaming operations.
+  Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource.
+  ZSTD_CCtx object can be re-used multiple times within successive compression operations.
+
+  Start by initializing a context.
+  Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression.
+  It's also possible to duplicate a reference context which has already been initialized, using ZSTD_copyCCtx()
+
+  Then, consume your input using ZSTD_compressContinue().
+  There are some important considerations to keep in mind when using this advanced function :
+  - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only.
+  - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks.
+  - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario.
+    Worst case evaluation is provided by ZSTD_compressBound().
+    ZSTD_compressContinue() doesn't guarantee recover after a failed compression.
+  - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog).
+    It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks)
+  - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps.
+    In which case, it will "discard" the relevant memory section from its history.
+
+  Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum.
+  It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame.
+  Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders.
+
+  `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress again.
+*/
+
+/*=====   Buffer-less streaming compression functions  =====*/
+ZSTDLIB_STATIC_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel);
+ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel);
+ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /*< note: fails if cdict==NULL */
+ZSTDLIB_STATIC_API size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /*<  note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */
+
+ZSTDLIB_STATIC_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+ZSTDLIB_STATIC_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+
+/* The ZSTD_compressBegin_advanced() and ZSTD_compressBegin_usingCDict_advanced() are now DEPRECATED and will generate a compiler warning */
+ZSTD_DEPRECATED("use advanced API to access custom parameters")
+size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /*< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */
+ZSTD_DEPRECATED("use advanced API to access custom parameters")
+size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize);   /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */
+/*
+  Buffer-less streaming decompression (synchronous mode)
+
+  A ZSTD_DCtx object is required to track streaming operations.
+  Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it.
+  A ZSTD_DCtx object can be re-used multiple times.
+
+  First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader().
+  Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough.
+  Data fragment must be large enough to ensure successful decoding.
+ `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough.
+  @result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled.
+           >0 : `srcSize` is too small, please provide at least @result bytes on next attempt.
+           errorCode, which can be tested using ZSTD_isError().
+
+  It fills a ZSTD_frameHeader structure with important information to correctly decode the frame,
+  such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`).
+  Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information.
+  As a consequence, check that values remain within valid application range.
+  For example, do not allocate memory blindly, check that `windowSize` is within expectation.
+  Each application can set its own limits, depending on local restrictions.
+  For extended interoperability, it is recommended to support `windowSize` of at least 8 MB.
+
+  ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes.
+  ZSTD_decompressContinue() is very sensitive to contiguity,
+  if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place,
+  or that previous contiguous segment is large enough to properly handle maximum back-reference distance.
+  There are multiple ways to guarantee this condition.
+
+  The most memory efficient way is to use a round buffer of sufficient size.
+  Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(),
+  which can @return an error code if required value is too large for current system (in 32-bits mode).
+  In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one,
+  up to the moment there is not enough room left in the buffer to guarantee decoding another full block,
+  which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`.
+  At which point, decoding can resume from the beginning of the buffer.
+  Note that already decoded data stored in the buffer should be flushed before being overwritten.
+
+  There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory.
+
+  Finally, if you control the compression process, you can also ignore all buffer size rules,
+  as long as the encoder and decoder progress in "lock-step",
+  aka use exactly the same buffer sizes, break contiguity at the same place, etc.
+
+  Once buffers are setup, start decompression, with ZSTD_decompressBegin().
+  If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict().
+
+  Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively.
+  ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue().
+  ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail.
+
+ @result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity).
+  It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item.
+  It can also be an error code, which can be tested with ZSTD_isError().
+
+  A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero.
+  Context can then be reset to start a new decompression.
+
+  Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType().
+  This information is not required to properly decode a frame.
+
+  == Special case : skippable frames ==
+
+  Skippable frames allow integration of user-defined data into a flow of concatenated frames.
+  Skippable frames will be ignored (skipped) by decompressor.
+  The format of skippable frames is as follows :
+  a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F
+  b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits
+  c) Frame Content - any content (User Data) of length equal to Frame Size
+  For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame.
+  For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content.
+*/
+
+/*=====   Buffer-less streaming decompression functions  =====*/
+typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_frameType_e;
+typedef struct {
+    unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */
+    unsigned long long windowSize;       /* can be very large, up to <= frameContentSize */
+    unsigned blockSizeMax;
+    ZSTD_frameType_e frameType;          /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */
+    unsigned headerSize;
+    unsigned dictID;
+    unsigned checksumFlag;
+} ZSTD_frameHeader;
+
+/*! ZSTD_getFrameHeader() :
+ *  decode Frame Header, or requires larger `srcSize`.
+ * @return : 0, `zfhPtr` is correctly filled,
+ *          >0, `srcSize` is too small, value is wanted `srcSize` amount,
+ *           or an error code, which can be tested using ZSTD_isError() */
+ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize);   /*< doesn't consume input */
+/*! ZSTD_getFrameHeader_advanced() :
+ *  same as ZSTD_getFrameHeader(),
+ *  with added capability to select a format (like ZSTD_f_zstd1_magicless) */
+ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader_advanced(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format);
+ZSTDLIB_STATIC_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize);  /*< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */
+
+ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx);
+ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
+
+ZSTDLIB_STATIC_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx);
+ZSTDLIB_STATIC_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+
+/* misc */
+ZSTDLIB_STATIC_API void   ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx);
+typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e;
+ZSTDLIB_STATIC_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx);
+
+
+
+
+/* ============================ */
+/*       Block level API       */
+/* ============================ */
+
+/*!
+    Block functions produce and decode raw zstd blocks, without frame metadata.
+    Frame metadata cost is typically ~12 bytes, which can be non-negligible for very small blocks (< 100 bytes).
+    But users will have to take in charge needed metadata to regenerate data, such as compressed and content sizes.
+
+    A few rules to respect :
+    - Compressing and decompressing require a context structure
+      + Use ZSTD_createCCtx() and ZSTD_createDCtx()
+    - It is necessary to init context before starting
+      + compression : any ZSTD_compressBegin*() variant, including with dictionary
+      + decompression : any ZSTD_decompressBegin*() variant, including with dictionary
+      + copyCCtx() and copyDCtx() can be used too
+    - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB
+      + If input is larger than a block size, it's necessary to split input data into multiple blocks
+      + For inputs larger than a single block, consider using regular ZSTD_compress() instead.
+        Frame metadata is not that costly, and quickly becomes negligible as source size grows larger than a block.
+    - When a block is considered not compressible enough, ZSTD_compressBlock() result will be 0 (zero) !
+      ===> In which case, nothing is produced into `dst` !
+      + User __must__ test for such outcome and deal directly with uncompressed data
+      + A block cannot be declared incompressible if ZSTD_compressBlock() return value was != 0.
+        Doing so would mess up with statistics history, leading to potential data corruption.
+      + ZSTD_decompressBlock() _doesn't accept uncompressed data as input_ !!
+      + In case of multiple successive blocks, should some of them be uncompressed,
+        decoder must be informed of their existence in order to follow proper history.
+        Use ZSTD_insertBlock() for such a case.
+*/
+
+/*=====   Raw zstd block functions  =====*/
+ZSTDLIB_STATIC_API size_t ZSTD_getBlockSize   (const ZSTD_CCtx* cctx);
+ZSTDLIB_STATIC_API size_t ZSTD_compressBlock  (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+ZSTDLIB_STATIC_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+ZSTDLIB_STATIC_API size_t ZSTD_insertBlock    (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize);  /*< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */
+
+
+#endif   /* ZSTD_H_ZSTD_STATIC_LINKING_ONLY */
+