mpc85xx: Add eSDHC support for MPC8569E-MDS boards
eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2
(in 1-bit mode). When eSDHC is used, we should switch u-boot console to
UART1, and make the proper device-tree fixups.
Because of an erratum in prototype boards it is impossible to use eSDHC
without disabling UART0 (which makes it quite easy to 'brick' the board
by simply issung 'setenv hwconfig esdhc', and not able to interact with
U-Boot anylonger).
So, but default we assume that the board is a prototype, which is a most
safe assumption. There is no way to determine board revision from a
register, so we use hwconfig.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/board/freescale/mpc8569mds/bcsr.h b/board/freescale/mpc8569mds/bcsr.h
index c4738d7..2ed57d8 100644
--- a/board/freescale/mpc8569mds/bcsr.h
+++ b/board/freescale/mpc8569mds/bcsr.h
@@ -33,7 +33,8 @@
#define BCSR6_UPC1_POS_EN 0x40
#define BCSR6_UPC1_ADDR_EN 0x20
#define BCSR6_UPC1_DEV2 0x10
-#define BCSR6_SD_ENABLE 0x04
+#define BCSR6_SD_CARD_1BIT 0x08
+#define BCSR6_SD_CARD_4BITS 0x04
#define BCSR6_TDM2G_EN 0x02
#define BCSR6_UCC7_RMII_EN 0x01
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index cc88731..2d07922 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -23,6 +23,7 @@
*/
#include <common.h>
+#include <hwconfig.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
@@ -35,6 +36,7 @@
#include <ioports.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_esdhc.h>
#include "bcsr.h"
@@ -303,6 +305,119 @@
out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
}
+#ifdef CONFIG_FSL_ESDHC
+
+/*
+ * Because of an erratum in prototype boards it is impossible to use eSDHC
+ * without disabling UART0 (which makes it quite easy to 'brick' the board
+ * by simply issung 'setenv hwconfig esdhc', and not able to interact with
+ * U-Boot anylonger).
+ *
+ * So, but default we assume that the board is a prototype, which is a most
+ * safe assumption. There is no way to determine board revision from a
+ * register, so we use hwconfig.
+ */
+
+static int prototype_board(void)
+{
+ if (hwconfig_subarg("board", "rev", NULL))
+ return hwconfig_subarg_cmp("board", "rev", "prototype");
+ return 1;
+}
+
+static int esdhc_disables_uart0(void)
+{
+ return prototype_board() ||
+ hwconfig_subarg_cmp("esdhc", "mode", "4-bits");
+}
+
+int board_mmc_init(bd_t *bd)
+{
+ struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
+ u8 bcsr6 = BCSR6_SD_CARD_1BIT;
+
+ if (!hwconfig("esdhc"))
+ return 0;
+
+ printf("Enabling eSDHC...\n"
+ " For eSDHC to function, I2C2 ");
+ if (esdhc_disables_uart0()) {
+ printf("and UART0 should be disabled.\n");
+ printf(" Redirecting stderr, stdout and stdin to UART1...\n");
+ console_assign(stderr, "eserial1");
+ console_assign(stdout, "eserial1");
+ console_assign(stdin, "eserial1");
+ printf("Switched to UART1 (initial log has been printed to "
+ "UART0).\n");
+ bcsr6 |= BCSR6_SD_CARD_4BITS;
+ } else {
+ printf("should be disabled.\n");
+ }
+
+ /* Assign I2C2 signals to eSDHC. */
+ clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK,
+ PLPPAR1_ESDHC_VAL);
+ clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK,
+ PLPDIR1_ESDHC_VAL);
+
+ /* Mux I2C2 (and optionally UART0) signals to eSDHC. */
+ setbits_8(&bcsr[6], bcsr6);
+
+ return fsl_esdhc_mmc_init(bd);
+}
+
+static void fdt_board_fixup_esdhc(void *blob, bd_t *bd)
+{
+ const char *status = "disabled";
+ int off;
+ int err;
+
+ if (!hwconfig("esdhc"))
+ return;
+
+ if (!esdhc_disables_uart0())
+ goto disable_i2c2;
+
+ off = fdt_path_offset(blob, "serial0");
+ if (off < 0) {
+ printf("WARNING: could not find serial0 alias: %s.\n",
+ fdt_strerror(off));
+ goto disable_i2c2;
+ }
+
+ err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
+ if (err) {
+ printf("WARNING: could not set status for serial0: %s.\n",
+ fdt_strerror(err));
+ return;
+ }
+
+disable_i2c2:
+ off = -1;
+ while (1) {
+ const u32 *idx;
+ int len;
+
+ off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c");
+ if (off < 0)
+ break;
+
+ idx = fdt_getprop(blob, off, "cell-index", &len);
+ if (!idx || len != sizeof(*idx))
+ continue;
+
+ if (*idx == 1) {
+ fdt_setprop(blob, off, "status", status,
+ strlen(status) + 1);
+ break;
+ }
+ }
+}
+#else
+static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {}
+#endif
+
#ifdef CONFIG_PCIE1
static struct pci_controller pcie1_hose;
#endif /* CONFIG_PCIE1 */
@@ -444,5 +559,6 @@
#ifdef CONFIG_PCIE1
ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
#endif
+ fdt_board_fixup_esdhc(blob, bd);
}
#endif
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 0244b5c..7959082 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -240,8 +240,12 @@
gd->i2c2_clk = gd->i2c1_clk;
#if defined(CONFIG_FSL_ESDHC)
+#ifdef CONFIG_MPC8569
+ gd->sdhc_clk = gd->bus_clk;
+#else
gd->sdhc_clk = gd->bus_clk / 2;
#endif
+#endif /* defined(CONFIG_FSL_ESDHC) */
#if defined(CONFIG_CPM2)
gd->vco_out = 2*sys_info.freqSystemBus;
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 32e747e..3d07a5b 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -70,6 +70,7 @@
#define CONFIG_ENABLE_36BIT_PHYS 1
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_HWCONFIG
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
@@ -206,6 +207,7 @@
/* Serial Port */
#define CONFIG_CONS_INDEX 1
+#define CONFIG_SERIAL_MULTI 1
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
@@ -258,8 +260,10 @@
#define PLPPAR1_I2C_BIT_MASK 0x0000000F
#define PLPPAR1_I2C2_VAL 0x00000000
+#define PLPPAR1_ESDHC_VAL 0x0000000A
#define PLPDIR1_I2C_BIT_MASK 0x0000000F
#define PLPDIR1_I2C2_VAL 0x0000000F
+#define PLPDIR1_ESDHC_VAL 0x00000006
/*
* General PCI
@@ -450,6 +454,18 @@
#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CONFIG_MMC 1
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
/*
* Miscellaneous configurable options
*/