Add SM501 support to HH405 board.
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
Add support for eeprom write-enable (CFG_EEPROM_WREN).
Patch by Stefan Roese, 22 Sep 2005
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 828592b..9ce6b3f 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -2,6 +2,9 @@
* (C) Copyright 2001-2004
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -60,17 +63,47 @@
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
+/*
+ * Video console
+ */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SM501
+#if 0
+#define CONFIG_VIDEO_SM501_32BPP
+#else
+#define CONFIG_VIDEO_SM501_16BPP
+#endif
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+#define CFG_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_GZIP /* gzip compressed bmp images */
+#define CFG_VIDEO_LOGO_MAX_SIZE (1024*1024) /* for decompressed img */
+
+#ifdef CONFIG_VIDEO
+#define ADD_BMP_CMD CFG_CMD_BMP
+#else
+#define ADD_BMP_CMD 0
+#endif
+
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_DHCP | \
CFG_CMD_PCI | \
CFG_CMD_IRQ | \
CFG_CMD_IDE | \
CFG_CMD_FAT | \
+ CFG_CMD_EXT2 | \
CFG_CMD_ELF | \
CFG_CMD_NAND | \
CFG_CMD_I2C | \
+ CFG_CMD_DATE | \
CFG_CMD_MII | \
CFG_CMD_PING | \
+ ADD_BMP_CMD | \
CFG_CMD_EEPROM )
#define CONFIG_MAC_PARTITION
@@ -111,7 +144,7 @@
#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
-#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
+#undef CFG_CONSOLE_INFO_QUIET /* print console @ startup */
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
@@ -140,6 +173,13 @@
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
/*-----------------------------------------------------------------------
+ * RTC stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_RTC_DS1338
+#define CFG_I2C_RTC_ADDR 0x68
+
+/*-----------------------------------------------------------------------
* NAND-FLASH stuff
*-----------------------------------------------------------------------
*/
@@ -294,6 +334,8 @@
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */
+#define CFG_EEPROM_WREN 1
+
#if 1 /* test-only */
/* CAT24WC08/16... */
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
@@ -449,7 +491,8 @@
#define CFG_GPIO0_TCR 0xF7FE0017
#define CFG_LCD_ENDIAN (0x80000000 >> 7)
-#define CFG_TOUCH_RST (0x80000000 >> 9)
+#define CFG_EEPROM_WP (0x80000000 >> 8) /* GPIO8 */
+#define CFG_TOUCH_RST (0x80000000 >> 9) /* GPIO9 */
#define CFG_LCD0_RST (0x80000000 >> 30)
#define CFG_LCD1_RST (0x80000000 >> 31)
diff --git a/include/sm501.h b/include/sm501.h
index d8f26fb..3e71dbb 100644
--- a/include/sm501.h
+++ b/include/sm501.h
@@ -32,6 +32,9 @@
#ifndef _SM501_H_
#define _SM501_H_
+#define PCI_VENDOR_SM 0x126f
+#define PCI_DEVICE_SM501 0x0501
+
typedef struct {
unsigned int Index;
unsigned int Value;