ARM: zynq: Describe nand device in DT
Linux requires to describe nand structure under nand controller.
If it is not described nand device is not detected by Linux.
Error shown by Linux kernel:
pl35x-nand-controller e1000000.nand-controller: Incorrect number of NAND chips (0)
pl35x-nand-controller: probe of e1000000.nand-controller failed with error -22
When wired:
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/3fcd68ccdfed5e6c079681e3b29e06583ec8a375.1695378830.git.michal.simek@amd.com
diff --git a/arch/arm/dts/bitmain-antminer-s9.dts b/arch/arm/dts/bitmain-antminer-s9.dts
index 6c47396..0228b4b 100644
--- a/arch/arm/dts/bitmain-antminer-s9.dts
+++ b/arch/arm/dts/bitmain-antminer-s9.dts
@@ -52,6 +52,9 @@
&nfc0 {
status = "okay";
+ nand@0 {
+ reg = <0>;
+ };
};
&smcc {
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index 0221434..d1e9712 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -49,6 +49,9 @@
&nfc0 {
status = "okay";
+ nand@0 {
+ reg = <0>;
+ };
};
&smcc {