board: rockchip: Add Radxa ROCK 5 ITX
The Rock 5 ITX is a board in ITX form factor using the RK3588 SoC
It can be powered either by 12V, ATX power-supply or PoE.
Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
2*2.5Gb PCIe-connected Ethernet NICs.
Display options are 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors.
USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
connector.
Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf
The naming scheme with the dashes follows Dragan's comment on the mainline
devicetree commit:
"the name of this board deviates from the standard Radxa naming scheme,
which is something like "ROCK <number><letter>" thus, "rock-5a" is
fine, but it should be "rock-5-itx", simply because there's a space
between "5" and "ITX" in "ROCK 5 ITX"
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/board/radxa/rock-5-itx-rk3588/Kconfig b/board/radxa/rock-5-itx-rk3588/Kconfig
new file mode 100644
index 0000000..f7a7666
--- /dev/null
+++ b/board/radxa/rock-5-itx-rk3588/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_ROCK_5_ITX_RK3588
+
+config SYS_BOARD
+ default "rock-5-itx-rk3588"
+
+config SYS_VENDOR
+ default "radxa"
+
+config SYS_CONFIG_NAME
+ default "rock-5-itx-rk3588"
+
+endif