EXYNOS: support EXYNOS MIPI DSI interface driver.
EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI
based LCD Panel could be used with it. This patch supports MIPI-DSI driver
based Samsung SoC chip.
LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at
board file and LCD panel driver specific function registered to mipi_dsim_ddi
structure at lcd panel init function called system init.
In the MIPI-DSI driver, find lcd panel driver by using registered
lcd panel name, and then initialize lcd panel driver.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
diff --git a/arch/arm/include/asm/arch-exynos/dsim.h b/arch/arm/include/asm/arch-exynos/dsim.h
new file mode 100644
index 0000000..e148aca
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/dsim.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DSIM_H_
+#define __ASM_ARM_ARCH_DSIM_H_
+
+#ifndef __ASSEMBLY__
+
+struct exynos_mipi_dsim {
+ unsigned int status;
+ unsigned int swrst;
+ unsigned int clkctrl;
+ unsigned int timeout;
+ unsigned int config;
+ unsigned int escmode;
+ unsigned int mdresol;
+ unsigned int mvporch;
+ unsigned int mhporch;
+ unsigned int msync;
+ unsigned int sdresol;
+ unsigned int intsrc;
+ unsigned int intmsk;
+ unsigned int pkthdr;
+ unsigned int payload;
+ unsigned int rxfifo;
+ unsigned int fifothld;
+ unsigned int fifoctrl;
+ unsigned int memacchr;
+ unsigned int pllctrl;
+ unsigned int plltmr;
+ unsigned int phyacchr;
+ unsigned int phyacchr1;
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Bit Definitions
+ */
+/* DSIM_STATUS */
+#define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0)
+#define DSIM_STOP_STATE_CLK (1 << 8)
+#define DSIM_TX_READY_HS_CLK (1 << 10)
+#define DSIM_PLL_STABLE (1 << 31)
+
+/* DSIM_SWRST */
+#define DSIM_FUNCRST (1 << 16)
+#define DSIM_SWRST (1 << 0)
+
+/* EXYNOS_DSIM_TIMEOUT */
+#define DSIM_LPDR_TOUT_SHIFT (0)
+#define DSIM_BTA_TOUT_SHIFT (16)
+
+/* EXYNOS_DSIM_CLKCTRL */
+#define DSIM_LANE_ESC_CLKEN_SHIFT (19)
+#define DSIM_BYTE_CLKEN_SHIFT (24)
+#define DSIM_BYTE_CLK_SRC_SHIFT (25)
+#define DSIM_PLL_BYPASS_SHIFT (27)
+#define DSIM_ESC_CLKEN_SHIFT (28)
+#define DSIM_TX_REQUEST_HSCLK_SHIFT (31)
+#define DSIM_LANE_ESC_CLKEN(x) (((x) & 0x1f) << \
+ DSIM_LANE_ESC_CLKEN_SHIFT)
+#define DSIM_BYTE_CLK_ENABLE (1 << DSIM_BYTE_CLKEN_SHIFT)
+#define DSIM_BYTE_CLK_DISABLE (0 << DSIM_BYTE_CLKEN_SHIFT)
+#define DSIM_PLL_BYPASS_EXTERNAL (1 << DSIM_PLL_BYPASS_SHIFT)
+#define DSIM_ESC_CLKEN_ENABLE (1 << DSIM_ESC_CLKEN_SHIFT)
+#define DSIM_ESC_CLKEN_DISABLE (0 << DSIM_ESC_CLKEN_SHIFT)
+
+/* EXYNOS_DSIM_CONFIG */
+#define DSIM_NUM_OF_DATALANE_SHIFT (5)
+#define DSIM_SUBPIX_SHIFT (8)
+#define DSIM_MAINPIX_SHIFT (12)
+#define DSIM_SUBVC_SHIFT (16)
+#define DSIM_MAINVC_SHIFT (18)
+#define DSIM_HSA_MODE_SHIFT (20)
+#define DSIM_HBP_MODE_SHIFT (21)
+#define DSIM_HFP_MODE_SHIFT (22)
+#define DSIM_HSE_MODE_SHIFT (23)
+#define DSIM_AUTO_MODE_SHIFT (24)
+#define DSIM_VIDEO_MODE_SHIFT (25)
+#define DSIM_BURST_MODE_SHIFT (26)
+#define DSIM_EOT_PACKET_SHIFT (28)
+#define DSIM_AUTO_FLUSH_SHIFT (29)
+#define DSIM_LANE_ENx(x) (((x) & 0x1f) << 0)
+
+#define DSIM_NUM_OF_DATA_LANE(x) ((x) << DSIM_NUM_OF_DATALANE_SHIFT)
+
+/* EXYNOS_DSIM_ESCMODE */
+#define DSIM_TX_LPDT_SHIFT (6)
+#define DSIM_CMD_LPDT_SHIFT (7)
+#define DSIM_TX_LPDT_LP (1 << DSIM_TX_LPDT_SHIFT)
+#define DSIM_CMD_LPDT_LP (1 << DSIM_CMD_LPDT_SHIFT)
+#define DSIM_STOP_STATE_CNT_SHIFT (21)
+#define DSIM_FORCE_STOP_STATE_SHIFT (20)
+
+/* EXYNOS_DSIM_MDRESOL */
+#define DSIM_MAIN_STAND_BY (1 << 31)
+#define DSIM_MAIN_VRESOL(x) (((x) & 0x7ff) << 16)
+#define DSIM_MAIN_HRESOL(x) (((x) & 0X7ff) << 0)
+
+/* EXYNOS_DSIM_MVPORCH */
+#define DSIM_CMD_ALLOW_SHIFT (28)
+#define DSIM_STABLE_VFP_SHIFT (16)
+#define DSIM_MAIN_VBP_SHIFT (0)
+#define DSIM_CMD_ALLOW_MASK (0xf << DSIM_CMD_ALLOW_SHIFT)
+#define DSIM_STABLE_VFP_MASK (0x7ff << DSIM_STABLE_VFP_SHIFT)
+#define DSIM_MAIN_VBP_MASK (0x7ff << DSIM_MAIN_VBP_SHIFT)
+
+/* EXYNOS_DSIM_MHPORCH */
+#define DSIM_MAIN_HFP_SHIFT (16)
+#define DSIM_MAIN_HBP_SHIFT (0)
+#define DSIM_MAIN_HFP_MASK ((0xffff) << DSIM_MAIN_HFP_SHIFT)
+#define DSIM_MAIN_HBP_MASK ((0xffff) << DSIM_MAIN_HBP_SHIFT)
+
+/* EXYNOS_DSIM_MSYNC */
+#define DSIM_MAIN_VSA_SHIFT (22)
+#define DSIM_MAIN_HSA_SHIFT (0)
+#define DSIM_MAIN_VSA_MASK ((0x3ff) << DSIM_MAIN_VSA_SHIFT)
+#define DSIM_MAIN_HSA_MASK ((0xffff) << DSIM_MAIN_HSA_SHIFT)
+
+/* EXYNOS_DSIM_SDRESOL */
+#define DSIM_SUB_STANDY_SHIFT (31)
+#define DSIM_SUB_VRESOL_SHIFT (16)
+#define DSIM_SUB_HRESOL_SHIFT (0)
+#define DSIM_SUB_STANDY_MASK ((0x1) << DSIM_SUB_STANDY_SHIFT)
+#define DSIM_SUB_VRESOL_MASK ((0x7ff) << DSIM_SUB_VRESOL_SHIFT)
+#define DSIM_SUB_HRESOL_MASK ((0x7ff) << DSIM_SUB_HRESOL_SHIFT)
+
+/* EXYNOS_DSIM_INTSRC */
+#define INTSRC_FRAME_DONE (1 << 24)
+#define INTSRC_PLL_STABLE (1 << 31)
+#define INTSRC_SWRST_RELEASE (1 << 30)
+
+/* EXYNOS_DSIM_INTMSK */
+#define INTMSK_FRAME_DONE (1 << 24)
+
+/* EXYNOS_DSIM_FIFOCTRL */
+#define SFR_HEADER_EMPTY (1 << 22)
+
+/* EXYNOS_DSIM_PKTHDR */
+#define DSIM_PKTHDR_DI(x) (((x) & 0x3f) << 0)
+#define DSIM_PKTHDR_DAT0(x) ((x) << 8)
+#define DSIM_PKTHDR_DAT1(x) ((x) << 16)
+
+/* EXYNOS_DSIM_PHYACCHR */
+#define DSIM_AFC_CTL(x) (((x) & 0x7) << 5)
+#define DSIM_AFC_CTL_SHIFT (5)
+#define DSIM_AFC_EN (1 << 14)
+
+/* EXYNOS_DSIM_PHYACCHR1 */
+#define DSIM_DPDN_SWAP_DATA_SHIFT (0)
+
+/* EXYNOS_DSIM_PLLCTRL */
+#define DSIM_SCALER_SHIFT (1)
+#define DSIM_MAIN_SHIFT (4)
+#define DSIM_PREDIV_SHIFT (13)
+#define DSIM_PRECTRL_SHIFT (20)
+#define DSIM_PLL_EN_SHIFT (23)
+#define DSIM_FREQ_BAND_SHIFT (24)
+#define DSIM_ZEROCTRL_SHIFT (28)
+
+#endif
diff --git a/arch/arm/include/asm/arch-exynos/mipi_dsim.h b/arch/arm/include/asm/arch-exynos/mipi_dsim.h
new file mode 100644
index 0000000..ef6a3d1
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/mipi_dsim.h
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _DSIM_H
+#define _DSIM_H
+
+#include <linux/list.h>
+#include <linux/fb.h>
+
+#define PANEL_NAME_SIZE (32)
+
+enum mipi_dsim_interface_type {
+ DSIM_COMMAND,
+ DSIM_VIDEO
+};
+
+enum mipi_dsim_virtual_ch_no {
+ DSIM_VIRTUAL_CH_0,
+ DSIM_VIRTUAL_CH_1,
+ DSIM_VIRTUAL_CH_2,
+ DSIM_VIRTUAL_CH_3
+};
+
+enum mipi_dsim_burst_mode_type {
+ DSIM_NON_BURST_SYNC_EVENT,
+ DSIM_BURST_SYNC_EVENT,
+ DSIM_NON_BURST_SYNC_PULSE,
+ DSIM_BURST,
+ DSIM_NON_VIDEO_MODE
+};
+
+enum mipi_dsim_no_of_data_lane {
+ DSIM_DATA_LANE_1,
+ DSIM_DATA_LANE_2,
+ DSIM_DATA_LANE_3,
+ DSIM_DATA_LANE_4
+};
+
+enum mipi_dsim_byte_clk_src {
+ DSIM_PLL_OUT_DIV8,
+ DSIM_EXT_CLK_DIV8,
+ DSIM_EXT_CLK_BYPASS
+};
+
+enum mipi_dsim_pixel_format {
+ DSIM_CMD_3BPP,
+ DSIM_CMD_8BPP,
+ DSIM_CMD_12BPP,
+ DSIM_CMD_16BPP,
+ DSIM_VID_16BPP_565,
+ DSIM_VID_18BPP_666PACKED,
+ DSIM_18BPP_666LOOSELYPACKED,
+ DSIM_24BPP_888
+};
+
+/* MIPI DSI Processor-to-Peripheral transaction types */
+enum {
+ MIPI_DSI_V_SYNC_START = 0x01,
+ MIPI_DSI_V_SYNC_END = 0x11,
+ MIPI_DSI_H_SYNC_START = 0x21,
+ MIPI_DSI_H_SYNC_END = 0x31,
+
+ MIPI_DSI_COLOR_MODE_OFF = 0x02,
+ MIPI_DSI_COLOR_MODE_ON = 0x12,
+ MIPI_DSI_SHUTDOWN_PERIPHERAL = 0x22,
+ MIPI_DSI_TURN_ON_PERIPHERAL = 0x32,
+
+ MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM = 0x03,
+ MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM = 0x13,
+ MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM = 0x23,
+
+ MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM = 0x04,
+ MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM = 0x14,
+ MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM = 0x24,
+
+ MIPI_DSI_DCS_SHORT_WRITE = 0x05,
+ MIPI_DSI_DCS_SHORT_WRITE_PARAM = 0x15,
+
+ MIPI_DSI_DCS_READ = 0x06,
+
+ MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE = 0x37,
+
+ MIPI_DSI_END_OF_TRANSMISSION = 0x08,
+
+ MIPI_DSI_NULL_PACKET = 0x09,
+ MIPI_DSI_BLANKING_PACKET = 0x19,
+ MIPI_DSI_GENERIC_LONG_WRITE = 0x29,
+ MIPI_DSI_DCS_LONG_WRITE = 0x39,
+
+ MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20 = 0x0c,
+ MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24 = 0x1c,
+ MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16 = 0x2c,
+
+ MIPI_DSI_PACKED_PIXEL_STREAM_30 = 0x0d,
+ MIPI_DSI_PACKED_PIXEL_STREAM_36 = 0x1d,
+ MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12 = 0x3d,
+
+ MIPI_DSI_PACKED_PIXEL_STREAM_16 = 0x0e,
+ MIPI_DSI_PACKED_PIXEL_STREAM_18 = 0x1e,
+ MIPI_DSI_PIXEL_STREAM_3BYTE_18 = 0x2e,
+ MIPI_DSI_PACKED_PIXEL_STREAM_24 = 0x3e,
+};
+
+/*
+ * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
+ *
+ * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
+ * @eot_disable: enable or disable EoT packet in HS mode.
+ * @auto_vertical_cnt: specifies auto vertical count mode.
+ * in Video mode, the vertical line transition uses line counter
+ * configured by VSA, VBP, and Vertical resolution.
+ * If this bit is set to '1', the line counter does not use VSA and VBP
+ * registers.(in command mode, this variable is ignored)
+ * @hse: set horizontal sync event mode.
+ * In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
+ * start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
+ * this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
+ * (in mommand mode, this variable is ignored)
+ * @hfp: specifies HFP disable mode.
+ * if this variable is set, DSI master ignores HFP area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @hbp: specifies HBP disable mode.
+ * if this variable is set, DSI master ignores HBP area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @hsa: specifies HSA disable mode.
+ * if this variable is set, DSI master ignores HSA area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @e_interface: specifies interface to be used.(CPU or RGB interface)
+ * @e_virtual_ch: specifies virtual channel number that main or
+ * sub diaplsy uses.
+ * @e_pixel_format: specifies pixel stream format for main or sub display.
+ * @e_burst_mode: selects Burst mode in Video mode.
+ * in Non-burst mode, RGB data area is filled with RGB data and NULL
+ * packets, according to input bandwidth of RGB interface.
+ * In Burst mode, RGB data area is filled with RGB data only.
+ * @e_no_data_lane: specifies data lane count to be used by Master.
+ * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
+ * DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
+ * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
+ * clock(System clock cycle base)
+ * if the timer value goes to 0x00000000, the clock stable bit of status
+ * and interrupt register is set.
+ * @esc_clk: specifies escape clock frequency for getting the escape clock
+ * prescaler value.
+ * @stop_holding_cnt: specifies the interval value between transmitting
+ * read packet(or write "set_tear_on" command) and BTA request.
+ * after transmitting read packet or write "set_tear_on" command,
+ * BTA requests to D-PHY automatically. this counter value specifies
+ * the interval between them.
+ * @bta_timeout: specifies the timer for BTA.
+ * this register specifies time out from BTA request to change
+ * the direction with respect to Tx escape clock.
+ * @rx_timeout: specifies the timer for LP Rx mode timeout.
+ * this register specifies time out on how long RxValid deasserts,
+ * after RxLpdt asserts with respect to Tx escape clock.
+ * - RxValid specifies Rx data valid indicator.
+ * - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
+ * - RxValid and RxLpdt specifies signal from D-PHY.
+ */
+struct mipi_dsim_config {
+ unsigned char auto_flush;
+ unsigned char eot_disable;
+
+ unsigned char auto_vertical_cnt;
+ unsigned char hse;
+ unsigned char hfp;
+ unsigned char hbp;
+ unsigned char hsa;
+
+ enum mipi_dsim_interface_type e_interface;
+ enum mipi_dsim_virtual_ch_no e_virtual_ch;
+ enum mipi_dsim_pixel_format e_pixel_format;
+ enum mipi_dsim_burst_mode_type e_burst_mode;
+ enum mipi_dsim_no_of_data_lane e_no_data_lane;
+ enum mipi_dsim_byte_clk_src e_byte_clk;
+
+ /*
+ * ===========================================
+ * | P | M | S | MHz |
+ * -------------------------------------------
+ * | 3 | 100 | 3 | 100 |
+ * | 3 | 100 | 2 | 200 |
+ * | 3 | 63 | 1 | 252 |
+ * | 4 | 100 | 1 | 300 |
+ * | 4 | 110 | 1 | 330 |
+ * | 12 | 350 | 1 | 350 |
+ * | 3 | 100 | 1 | 400 |
+ * | 4 | 150 | 1 | 450 |
+ * | 6 | 118 | 1 | 472 |
+ * | 3 | 120 | 1 | 480 |
+ * | 12 | 250 | 0 | 500 |
+ * | 4 | 100 | 0 | 600 |
+ * | 3 | 81 | 0 | 648 |
+ * | 3 | 88 | 0 | 704 |
+ * | 3 | 90 | 0 | 720 |
+ * | 3 | 100 | 0 | 800 |
+ * | 12 | 425 | 0 | 850 |
+ * | 4 | 150 | 0 | 900 |
+ * | 12 | 475 | 0 | 950 |
+ * | 6 | 250 | 0 | 1000 |
+ * -------------------------------------------
+ */
+
+ /*
+ * pms could be calculated as the following.
+ * M * 24 / P * 2 ^ S = MHz
+ */
+ unsigned char p;
+ unsigned short m;
+ unsigned char s;
+
+ unsigned int pll_stable_time;
+ unsigned long esc_clk;
+
+ unsigned short stop_holding_cnt;
+ unsigned char bta_timeout;
+ unsigned short rx_timeout;
+};
+
+/*
+ * struct mipi_dsim_device - global interface for mipi-dsi driver.
+ *
+ * @dsim_config: infomation for configuring mipi-dsi controller.
+ * @master_ops: callbacks to mipi-dsi operations.
+ * @dsim_lcd_dev: pointer to activated ddi device.
+ * (it would be registered by mipi-dsi driver.)
+ * @dsim_lcd_drv: pointer to activated_ddi driver.
+ * (it would be registered by mipi-dsi driver.)
+ * @state: specifies status of MIPI-DSI controller.
+ * the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
+ * @data_lane: specifiec enabled data lane number.
+ * this variable would be set by driver according to e_no_data_lane
+ * automatically.
+ * @e_clk_src: select byte clock source.
+ * @pd: pointer to MIPI-DSI driver platform data.
+ */
+struct mipi_dsim_device {
+ struct mipi_dsim_config *dsim_config;
+ struct mipi_dsim_master_ops *master_ops;
+ struct mipi_dsim_lcd_device *dsim_lcd_dev;
+ struct mipi_dsim_lcd_driver *dsim_lcd_drv;
+
+ unsigned int state;
+ unsigned int data_lane;
+ enum mipi_dsim_byte_clk_src e_clk_src;
+
+ struct exynos_platform_mipi_dsim *pd;
+};
+
+/*
+ * struct exynos_platform_mipi_dsim - interface to platform data
+ * for mipi-dsi driver.
+ *
+ * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
+ * lcd panel driver searched would be actived.
+ * @dsim_config: pointer of structure for configuring mipi-dsi controller.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ * this structure specifies width, height, timing and polarity and so on.
+ * @lcd_power: callback pointer for enabling or disabling lcd power.
+ * @mipi_power: callback pointer for enabling or disabling mipi power.
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct exynos_platform_mipi_dsim {
+ char lcd_panel_name[PANEL_NAME_SIZE];
+
+ struct mipi_dsim_config *dsim_config;
+ void *lcd_panel_info;
+
+ int (*lcd_power)(void);
+ int (*mipi_power)(void);
+ void (*phy_enable)(unsigned int dev_index, unsigned int enable);
+};
+
+/*
+ * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
+ *
+ * @cmd_write: transfer command to lcd panel at LP mode.
+ * @cmd_read: read command from rx register.
+ * @get_dsim_frame_done: get the status that all screen data have been
+ * transferred to mipi-dsi.
+ * @clear_dsim_frame_done: clear frame done status.
+ * @get_fb_frame_done: get frame done status of display controller.
+ * @trigger: trigger display controller.
+ * - this one would be used only in case of CPU mode.
+ */
+struct mipi_dsim_master_ops {
+ int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned int data0, unsigned int data1);
+ int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned int data0, unsigned int data1);
+ int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
+ int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
+
+ int (*get_fb_frame_done)(void);
+ void (*trigger)(struct fb_info *info);
+};
+
+/*
+ * device structure for mipi-dsi based lcd panel.
+ *
+ * @name: name of the device to use with this device, or an
+ * alias for that name.
+ * @id: id of device to be registered.
+ * @bus_id: bus id for identifing connected bus
+ * and this bus id should be same as id of mipi_dsim_device.
+ * @master: pointer to mipi-dsi master device object.
+ * @platform_data: lcd panel specific platform data.
+ */
+struct mipi_dsim_lcd_device {
+ char *name;
+ int id;
+ int bus_id;
+
+ struct mipi_dsim_device *master;
+ void *platform_data;
+};
+
+/*
+ * driver structure for mipi-dsi based lcd panel.
+ *
+ * this structure should be registered by lcd panel driver.
+ * mipi-dsi driver seeks lcd panel registered through name field
+ * and calls these callback functions in appropriate time.
+ *
+ * @name: name of the driver to use with this device, or an
+ * alias for that name.
+ * @id: id of driver to be registered.
+ * this id would be used for finding device object registered.
+ * @mipi_panel_init: callback pointer for initializing lcd panel based on mipi
+ * dsi interface.
+ * @mipi_display_on: callback pointer for lcd panel display on.
+ */
+struct mipi_dsim_lcd_driver {
+ char *name;
+ int id;
+
+ int (*mipi_panel_init)(struct mipi_dsim_device *dsim_dev);
+ void (*mipi_display_on)(struct mipi_dsim_device *dsim_dev);
+};
+
+int exynos_mipi_dsi_init(void);
+
+/*
+ * register mipi_dsim_lcd_driver object defined by lcd panel driver
+ * to mipi-dsi driver.
+ */
+int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
+ *lcd_drv);
+
+/*
+ * register mipi_dsim_lcd_device to mipi-dsi master.
+ */
+int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
+ *lcd_dev);
+
+void exynos_set_dsim_platform_data(struct exynos_platform_mipi_dsim *pd);
+
+/* panel driver init based on mipi dsi interface */
+void s6e8ax0_init(void);
+
+#endif /* _DSIM_H */