Merge with ssh://fifi/home/wd/git/u-boot/master
diff --git a/CHANGELOG b/CHANGELOG
index b5ee677..27a6541 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,76 @@
Changes since U-Boot 1.1.4:
======================================================================
+* Add support for gth2 board
+ Patch by Thomas Lange, Aug 11 2005
+
+* Add support for CONFIG_SERIAL_MULTI on MPC5xxx
+ Patch by Martin Krause, 8 Jun 2006
+
+ This patch supports two serial consoles on boards with
+ a MPC5xxx CPU. The console can be switched at runtime
+ by setting stdin, stdout and stderr to the desired serial
+ interface (serial0 or serial1). The PSCs to be used as
+ console port are definded by CONFIG_PSC_CONSOLE
+ and CONFIG_PSC_CONSOLE2.
+ See README.serial_multi for details.
+
+* Bugfix in I2C initialisation on S3C2400.
+ If the bus is blocked because of a previously interrupted
+ transfer, up to eleven clocks are generated on the I2CSCL
+ line to complete the transfer and to free the bus.
+ With this fix pin I2CSCL (PG6) is really configured as GPIO
+ so the clock pulses are really generated.
+ Patch by Martin Krause, 04 Apr 2006
+
+* Fix DDR6 errata on TQM834x boards
+ Patch by Thomas Waehner, 07 Mar 2006
+
+* Remove obsolete flash driver board/tqm5200/flash.c
+ Patch by Martin Krause, 11 Jan 2006
+
+* Update configuration for CMC-PU2 board
+ Patch by Martin Krause, 17 Nov 2005
+
+* Add support for PS/2 keyboard on TQM85xx board
+ Patch by Martin Krause, 07 Nov 2005
+
+ Tested on a STK85XX baseboard. Make sure the PS/2 controller
+ has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
+
+* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
+ In tsc2000_read_channel() the delay after setting the multiplexer
+ to a temperature channel is increased from 1,5 ms to 10 ms. This
+ is to allow the multiplexer inputs to stabilize after huge steps
+ of the input signal level.
+ Patch by Martin Krause, 08 Nov 2005
+
+* Adjust TQM5200 make targets
+ Make the automatic CS configuration the default.
+ The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
+ and CONFIG_TQM5200_AC are removed.
+ "TQM5200_config" is now the default for STK52XX.200 base boards.
+ On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
+ Patch by Martin Krause, 07 Nov 2005
+
+* Fix setting of environment variable "ver" on trab board
+ The environment variable "ver" is now set before
+ do_auto_update() is called, so that "ver" can be used
+ in USB update scripts.
+ Patch by Martin Krause, 27 Oct 2005
+
+* Fix wrong usage of udelay() in led_blink() on trab board
+ Patch by Martin Krause, 27 Oct 2005
+
+* Fix udelay bug in vfd.c for trab board
+ Patch by Martin Krause, 27 Oct 2005
+
+* Disable JFFS2 support for trab board
+ Patch by Martin Krause, 27 Oct 2005
+
+* Change mtdparts definition on trab board to match current flash map
+ Patch by Martin Krause, 27 Oct 2005
+
* Fix IxEthDB.h to compile again
Patch by Stefan Roese, 14 Jun 2006
diff --git a/CREDITS b/CREDITS
index f91fa3e..c35f07b 100644
--- a/CREDITS
+++ b/CREDITS
@@ -253,7 +253,7 @@
N: Thomas Lange
E: thomas@corelatus.se
-D: Support for GTH and dbau1x00 boards; lots of PCMCIA fixes
+D: Support for GTH, GTH2 and dbau1x00 boards; lots of PCMCIA fixes
N: Marc Leeman
E: marc.leeman@barco.com
diff --git a/MAINTAINERS b/MAINTAINERS
index 9a2f472..aaf91cd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -489,6 +489,7 @@
Thomas Lange <thomas@corelatus.se>
dbau1x00 MIPS32 Au1000
+ gth2 MIPS32 Au1000
#########################################################################
# Nios-32 Systems: #
diff --git a/MAKEALL b/MAKEALL
index 6778b3b..3eee323 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -28,7 +28,7 @@
BC3450 cpci5200 EVAL5200 icecube_5100 \
icecube_5200 lite5200b mcc200 o2dnt \
pf5200 PM520 Total5100 Total5200 \
- Total5200_Rev2 TQM5200_auto \
+ Total5200_Rev2 TQM5200 \
"
#########################################################################
@@ -226,7 +226,7 @@
LIST_mips5kc="purple"
-LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el"
+LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el gth2"
LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1xx0}"
diff --git a/Makefile b/Makefile
index 440ab2c..9db3bf2 100644
--- a/Makefile
+++ b/Makefile
@@ -356,8 +356,8 @@
@./mkconfig -a smmaco4 ppc mpc5xxx tqm5200
spieval_config: unconfig
- echo "#define CONFIG_CS_AUTOCONF">>include/config.h
- echo "... with automatic CS configuration"
+ @echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+ @echo "... with automatic CS configuration"
@./mkconfig -a spieval ppc mpc5xxx tqm5200
MINI5200_config \
@@ -394,35 +394,20 @@
}
@./mkconfig -a Total5200 ppc mpc5xxx total5200
-TQM5200_auto_config \
-TQM5200_AA_config \
-TQM5200_AB_config \
-TQM5200_AC_config \
+TQM5200_config \
+TQM5200_STK100_config \
MiniFAP_config: unconfig
@ >include/config.h
@[ -z "$(findstring MiniFAP,$@)" ] || \
{ echo "#define CONFIG_MINIFAP" >>include/config.h ; \
- echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \
echo "... TQM5200_AC on MiniFAP" ; \
}
- @[ -z "$(findstring AA,$@)" ] || \
- { echo "#define CONFIG_TQM5200_AA" >>include/config.h ; \
- echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \
+ @[ -z "$(findstring STK100,$@)" ] || \
+ { echo "#define CONFIG_STK52XX_REV100" >>include/config.h ; \
+ echo "... on a STK52XX.100 base board" ; \
}
- @[ -z "$(findstring AB,$@)" ] || \
- { echo "#define CONFIG_TQM5200_AB" >>include/config.h ; \
- echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \
- echo "... with Graphics Controller"; \
- }
- @[ -z "$(findstring AC,$@)" ] || \
- { echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \
- echo "... with 4 MB Flash, 128 MB SDRAM" ; \
- echo "... with Graphics Controller"; \
- }
- @[ -z "$(findstring auto,$@)" ] || \
- { echo "#define CONFIG_CS_AUTOCONF" >>include/config.h ; \
- echo "... with automatic CS configuration" ; \
- }
+ @echo "#define CONFIG_CS_AUTOCONF">>include/config.h ;
+ @echo "... with automatic CS configuration" ;
@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
#########################################################################
@@ -1667,6 +1652,11 @@
cm41xx_config : unconfig
@./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695
+gth2_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_GTH2 1" >>include/config.h
+ @./mkconfig -a gth2 mips mips gth2
+
#########################################################################
## S3C44B0 Systems
#########################################################################
diff --git a/board/gth2/Makefile b/board/gth2/Makefile
new file mode 100644
index 0000000..8ef3a51
--- /dev/null
+++ b/board/gth2/Makefile
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2005
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o ee_access.o
+SOBJS = lowlevel_init.o
+
+$(LIB): .depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/gth2/config.mk b/board/gth2/config.mk
new file mode 100644
index 0000000..6d21ba1
--- /dev/null
+++ b/board/gth2/config.mk
@@ -0,0 +1,42 @@
+#
+# (C) Copyright 2004-2005
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMD Alchemy AU1000, MIPS32 core
+#
+
+ifeq ($(TBASE),0)
+TEXT_BASE = 0
+else
+ifeq ($(TBASE),1)
+TEXT_BASE = 0xbfc10070
+else
+ifeq ($(TBASE),2)
+TEXT_BASE = 0xbfc30070
+else
+## Only to make ordinary make work
+TEXT_BASE = 0x90000000
+endif
+endif
+endif
+
diff --git a/board/gth2/ee_access.c b/board/gth2/ee_access.c
new file mode 100644
index 0000000..e293139
--- /dev/null
+++ b/board/gth2/ee_access.c
@@ -0,0 +1,347 @@
+/* Module for handling DALLAS DS2438, smart battery monitor
+ Chip can store up to 40 bytes of user data in EEPROM,
+ perform temp, voltage and current measurements.
+ Chip also contains a unique serial number.
+
+ Always read/write LSb first
+
+ For documentaion, see data sheet for DS2438, 2438.pdf
+
+ By Thomas.Lange@corelatus.com 001025
+
+ Copyright (C) 2000-2005 Corelatus AB */
+
+/* This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/au1x00.h>
+#include <asm/io.h>
+#include "ee_dev.h"
+#include "ee_access.h"
+
+/* static int Debug = 1; */
+#undef E_DEBUG
+#define E_DEBUG(fmt,args...) /* */
+/* #define E_DEBUG(fmt,args...) printk("EEA:"fmt,##args); */
+
+/* We dont have kernel functions */
+#define printk printf
+#define KERN_DEBUG
+#define KERN_ERR
+#define EIO 1
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/* lookup table ripped from DS app note 17, understanding and using cyclic redundancy checks... */
+
+static u8 crc_lookup[256] = {
+ 0, 94, 188, 226, 97, 63, 221, 131,
+ 194, 156, 126, 32, 163, 253, 31, 65,
+ 157, 195, 33, 127, 252, 162, 64, 30,
+ 95, 1, 227, 189, 62, 96, 130, 220,
+ 35, 125, 159, 193, 66, 28, 254, 160,
+ 225, 191, 93, 3, 128, 222, 60, 98,
+ 190, 224, 2, 92, 223, 129, 99, 61,
+ 124, 34, 192, 158, 29, 67, 161, 255,
+ 70, 24, 250, 164, 39, 121, 155, 197,
+ 132, 218, 56, 102, 229, 187, 89, 7,
+ 219, 133, 103, 57, 186, 228, 6, 88,
+ 25, 71, 165, 251, 120, 38, 196, 154,
+ 101, 59, 217, 135, 4, 90, 184, 230,
+ 167, 249, 27, 69, 198, 152, 122, 36,
+ 248, 166, 68, 26, 153, 199, 37, 123,
+ 58, 100, 134, 216, 91, 5, 231, 185,
+ 140, 210, 48, 110, 237, 179, 81, 15,
+ 78, 16, 242, 172, 47, 113, 147, 205,
+ 17, 79, 173, 243, 112, 46, 204, 146,
+ 211, 141, 111, 49, 178, 236, 14, 80,
+ 175, 241, 19, 77, 206, 144, 114, 44,
+ 109, 51, 209, 143, 12, 82, 176, 238,
+ 50, 108, 142, 208, 83, 13, 239, 177,
+ 240, 174, 76, 18, 145, 207, 45, 115,
+ 202, 148, 118, 40, 171, 245, 23, 73,
+ 8, 86, 180, 234, 105, 55, 213, 139,
+ 87, 9, 235, 181, 54, 104, 138, 212,
+ 149, 203, 41, 119, 244, 170, 72, 22,
+ 233, 183, 85, 11, 136, 214, 52, 106,
+ 43, 117, 151, 201, 74, 20, 246, 168,
+ 116, 42, 200, 150, 21, 75, 169, 247,
+ 182, 232, 10, 84, 215, 137, 107, 53
+};
+
+static void
+write_gpio_data(int value ){
+ if(value){
+ /* Tristate */
+ gpio_tristate(GPIO_EEDQ);
+ }
+ else{
+ /* Drive 0 */
+ gpio_clear(GPIO_EEDQ);
+ }
+}
+
+static u8 make_new_crc( u8 Old_crc, u8 New_value ){
+ /* Compute a new checksum with new byte, using previous checksum as input
+ See DS app note 17, understanding and using cyclic redundancy checks...
+ Also see DS2438, page 11 */
+ return( crc_lookup[Old_crc ^ New_value ]);
+}
+
+int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){
+ /* Check if the checksum for this buffer is correct */
+ u8 Curr_crc=0;
+ int i;
+ u8 *Curr_byte = Buffer;
+
+ for(i=0;i<Len;i++){
+ Curr_crc = make_new_crc( Curr_crc, *Curr_byte);
+ Curr_byte++;
+ }
+ E_DEBUG("Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc);
+
+ if(Curr_crc == Crc){
+ /* Good */
+ return(TRUE);
+ }
+ printk(KERN_ERR"EE checksum error, Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc);
+ return(FALSE);
+}
+
+static void
+set_idle(void){
+ /* Send idle and keep start time
+ Continous 1 is idle */
+ WRITE_PORT(1);
+}
+
+
+static int
+do_cpu_reset(void){
+ /* Release reset and verify that chip responds with presence pulse */
+ int Retries=0;
+ while(Retries<15){
+ udelay(RESET_LOW_TIME);
+
+ /* Send reset */
+ WRITE_PORT(0);
+ udelay(RESET_LOW_TIME);
+
+ /* Release reset */
+ WRITE_PORT(1);
+
+ /* Wait for EEPROM to drive output */
+ udelay(PRESENCE_TIMEOUT);
+ if(!READ_PORT){
+ /* Ok, EEPROM is driving a 0 */
+ E_DEBUG("Presence detected\n");
+ if(Retries){
+ E_DEBUG("Retries %d\n",Retries);
+ }
+ /* Make sure chip releases pin */
+ udelay(PRESENCE_LOW_TIME);
+ return 0;
+ }
+ Retries++;
+ }
+
+ printk(KERN_ERR"eeprom did not respond when releasing reset\n");
+
+ /* Make sure chip releases pin */
+ udelay(PRESENCE_LOW_TIME);
+
+ /* Set to idle again */
+ set_idle();
+
+ return(-EIO);
+}
+
+static u8
+read_cpu_byte(void){
+ /* Read a single byte from EEPROM
+ Read LSb first */
+ int i;
+ int Value;
+ u8 Result=0;
+ u32 Flags;
+
+ E_DEBUG("Reading byte\n");
+
+ for(i=0;i<8;i++){
+ /* Small delay between pulses */
+ udelay(1);
+
+#ifdef __KERNEL__
+ /* Disable irq */
+ save_flags(Flags);
+ cli();
+#endif
+
+ /* Pull down pin short time to start read
+ See page 26 in data sheet */
+
+ WRITE_PORT(0);
+ udelay(READ_LOW);
+ WRITE_PORT(1);
+
+ /* Wait for chip to drive pin */
+ udelay(READ_TIMEOUT);
+
+ Value = READ_PORT;
+ if(Value)
+ Value=1;
+
+#ifdef __KERNEL__
+ /* Enable irq */
+ restore_flags(Flags);
+#endif
+
+ /* Wait for chip to release pin */
+ udelay(TOTAL_READ_LOW-READ_TIMEOUT);
+
+ /* LSb first */
+ Result|=Value<<i;
+ /* E_DEBUG("Read %d\n",Value); */
+
+ }
+
+ E_DEBUG("Read byte 0x%x\n",Result);
+
+ return(Result);
+}
+
+static void
+write_cpu_byte(u8 Byte){
+ /* Write a single byte to EEPROM
+ Write LSb first */
+ int i;
+ int Value;
+ u32 Flags;
+
+ E_DEBUG("Writing byte 0x%x\n",Byte);
+
+ for(i=0;i<8;i++){
+ /* Small delay between pulses */
+ udelay(1);
+ Value = Byte&1;
+
+#ifdef __KERNEL__
+ /* Disable irq */
+ save_flags(Flags);
+ cli();
+#endif
+
+ /* Pull down pin short time for a 1, long time for a 0
+ See page 26 in data sheet */
+
+ WRITE_PORT(0);
+ if(Value){
+ /* Write a 1 */
+ udelay(WRITE_1_LOW);
+ }
+ else{
+ /* Write a 0 */
+ udelay(WRITE_0_LOW);
+ }
+
+ WRITE_PORT(1);
+
+#ifdef __KERNEL__
+ /* Enable irq */
+ restore_flags(Flags);
+#endif
+
+ if(Value)
+ /* Wait for chip to read the 1 */
+ udelay(TOTAL_WRITE_LOW-WRITE_1_LOW);
+
+ /* E_DEBUG("Wrote %d\n",Value); */
+ Byte>>=1;
+ }
+}
+
+int ee_do_cpu_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ){
+ /* Execute this command string, including
+ giving reset and setting to idle after command
+ if Rx_len is set, we read out data from EEPROM */
+ int i;
+
+ E_DEBUG("Command, Tx_len %d, Rx_len %d\n", Tx_len, Rx_len );
+
+ if(do_cpu_reset()){
+ /* Failed! */
+ return(-EIO);
+ }
+
+ if(Send_skip)
+ /* Always send SKIP_ROM first to tell chip we are sending a command,
+ except when we read out rom data for chip */
+ write_cpu_byte(SKIP_ROM);
+
+ /* Always have Tx data */
+ for(i=0;i<Tx_len;i++){
+ write_cpu_byte(Tx[i]);
+ }
+
+ if(Rx_len){
+ for(i=0;i<Rx_len;i++){
+ Rx[i]=read_cpu_byte();
+ }
+ }
+
+ set_idle();
+
+ E_DEBUG("Command done\n");
+
+ return(0);
+}
+
+int ee_init_cpu_data(void){
+ int i;
+ u8 Tx[10];
+
+ /* Leave it floting since altera is driving the same pin */
+ set_idle();
+
+ /* Copy all User EEPROM data to scratchpad */
+ for(i=0;i<USER_PAGES;i++){
+ Tx[0]=RECALL_MEMORY;
+ Tx[1]=EE_USER_PAGE_0+i;
+ if(ee_do_cpu_command(Tx,2,NULL,0,TRUE)) return(-EIO);
+ }
+
+ /* Make sure chip doesnt store measurements in NVRAM */
+ Tx[0]=WRITE_SCRATCHPAD;
+ Tx[1]=0; /* Page */
+ Tx[2]=9;
+ if(ee_do_cpu_command(Tx,3,NULL,0,TRUE)) return(-EIO);
+
+ Tx[0]=COPY_SCRATCHPAD;
+ if(ee_do_cpu_command(Tx,2,NULL,0,TRUE)) return(-EIO);
+
+ for(i=0;i<10;i++){
+ udelay(1000);
+ }
+
+ return(0);
+}
diff --git a/board/gth2/ee_access.h b/board/gth2/ee_access.h
new file mode 100644
index 0000000..c21730e
--- /dev/null
+++ b/board/gth2/ee_access.h
@@ -0,0 +1,30 @@
+/* By Thomas.Lange@Corelatus.com 001025 */
+
+/* Definitions for EEPROM/VOLT METER DS2438 */
+/* Copyright (C) 2000-2005 Corelatus AB */
+
+#ifndef INCeeaccessh
+#define INCeeaccessh
+
+#include <asm/types.h>
+#include "ee_dev.h"
+
+int ee_do_cpu_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip );
+int ee_init_cpu_data(void);
+
+int ee_crc_ok( u8 *Buffer, int Len, u8 Crc );
+
+/* Defs for altera reg */
+#define EE_WRITE_SHIFT 8 /* bits to shift left */
+#define EE_READ_SHIFT 16 /* bits to shift left */
+#define EE_DONE 0x80000000
+#define EE_BUSY 0x40000000
+#define EE_ERROR 0x20000000
+
+/* Commands */
+#define EE_CMD_NOP 0
+#define EE_CMD_INIT_RES 1
+#define EE_CMD_WR_BYTE 2
+#define EE_CMD_RD_BYTE 3
+
+#endif /* INCeeaccessh */
diff --git a/board/gth2/ee_dev.h b/board/gth2/ee_dev.h
new file mode 100644
index 0000000..acc3418
--- /dev/null
+++ b/board/gth2/ee_dev.h
@@ -0,0 +1,96 @@
+/* By Thomas.Lange@Corelatus.com 001025 */
+/* Definitions for EEPROM/VOLT METER DS2438 */
+/* Copyright (C) 2000-2005 Corelatus AB */
+
+/* This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef INCeedevh
+#define INCeedevh
+
+#define E_DEBUG(fmt,args...) if( Debug ) printk(KERN_DEBUG"EE: " fmt, ##args)
+
+/* MIPS */
+#define WRITE_PORT(Value) write_gpio_data(Value)
+
+#define READ_PORT (gpio_read()&GPIO_EEDQ)
+
+/* 64 bytes chip */
+#define EE_CHIP_SIZE 64
+
+/* Board with new current resistor */
+#define EE_GTH_0304 1
+
+/* new dsp and 64 MB SDRAM */
+#define EE_DSP_64 0x10
+
+/* microsecs */
+/* Pull line down at least this long for reset pulse */
+#define RESET_LOW_TIME 490
+
+/* Read presence pulse after we release reset pulse */
+#define PRESENCE_TIMEOUT 100
+#define PRESENCE_LOW_TIME 200
+
+#define WRITE_0_LOW 60
+#define WRITE_1_LOW 1
+#define TOTAL_WRITE_LOW 60
+
+#define READ_LOW 1
+#define READ_TIMEOUT 10
+#define TOTAL_READ_LOW 70
+
+/* Rom function commands */
+#define READ_ROM 0x33
+#define MATCH_ROM 0x55
+#define SKIP_ROM 0xCC
+#define SEARCH_ROM 0xF0
+
+
+/* Memory_command_function */
+#define WRITE_SCRATCHPAD 0x4E
+#define READ_SCRATCHPAD 0xBE
+#define COPY_SCRATCHPAD 0x48
+#define RECALL_MEMORY 0xB8
+#define CONVERT_TEMP 0x44
+#define CONVERT_VOLTAGE 0xB4
+
+/* Chip is divided in 8 pages, 8 bytes each */
+
+#define EE_PAGE_SIZE 8
+
+/* All chip data we want are in page 0 */
+
+/* Bytes in page 0 */
+#define EE_P0_STATUS 0
+#define EE_P0_TEMP_LSB 1
+#define EE_P0_TEMP_MSB 2
+#define EE_P0_VOLT_LSB 3
+#define EE_P0_VOLT_MSB 4
+#define EE_P0_CURRENT_LSB 5
+#define EE_P0_CURRENT_MSB 6
+
+
+/* 40 byte user data is located at page 3-7 */
+#define EE_USER_PAGE_0 3
+#define USER_PAGES 5
+
+/* Layout of gth user pages usage */
+/* Bytes 0-16 ethernet addr in ascii ( len 17 ) */
+
+#define EE_ETHERNET_OFFSET 0
+
+#endif /* INCeedevh */
diff --git a/board/gth2/flash.c b/board/gth2/flash.c
new file mode 100644
index 0000000..f96edff
--- /dev/null
+++ b/board/gth2/flash.c
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+unsigned long flash_init (void)
+{
+ printf ("Skipping flash_init\n");
+ return (0);
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ printf ("write_buff not implemented\n");
+ return (-1);
+}
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
new file mode 100644
index 0000000..77fc5b4
--- /dev/null
+++ b/board/gth2/gth2.c
@@ -0,0 +1,435 @@
+/*
+ * (C) Copyright 2005
+ * Thomas.Lange@corelatus.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/au1x00.h>
+#include <asm/addrspace.h>
+#include <asm/mipsregs.h>
+#include <watchdog.h>
+
+#include "ee_access.h"
+
+static int wdi_status = 0;
+
+unsigned long mips_io_port_base = 0;
+
+#define SDRAM_SIZE ((64*1024*1024)-(12*4096))
+
+
+#define SERIAL_LOG_BUFFER KSEG1ADDR(SDRAM_SIZE + (8*4096))
+
+void inline log_serial_char(char c){
+ char *serial_log_buffer = (char*)SERIAL_LOG_BUFFER;
+ int serial_log_offset;
+ u32 *serial_log_offsetp = (u32*)SERIAL_LOG_BUFFER;
+
+ serial_log_offset = *serial_log_offsetp;
+
+ *(serial_log_buffer + serial_log_offset) = c;
+
+ serial_log_offset++;
+
+ if(serial_log_offset >= 4096){
+ serial_log_offset = 4;
+ }
+ *serial_log_offsetp = serial_log_offset;
+}
+
+void init_log_serial(void){
+ char *serial_log_buffer = (char*)SERIAL_LOG_BUFFER;
+ u32 *serial_log_offsetp = (u32*)SERIAL_LOG_BUFFER;
+
+ /* Copy buffer from last run */
+ memcpy(serial_log_buffer + 4096,
+ serial_log_buffer,
+ 4096);
+
+ memset(serial_log_buffer, 0, 4096);
+
+ *serial_log_offsetp = 4;
+}
+
+
+void hw_watchdog_reset(void){
+ volatile u32 *sys_outputset = (volatile u32*)SYS_OUTPUTSET;
+ volatile u32 *sys_outputclear = (volatile u32*)SYS_OUTPUTCLR;
+ if(wdi_status){
+ *sys_outputset = GPIO_CPU_LED|GPIO_WDI;
+ wdi_status = 0;
+ }
+ else{
+ *sys_outputclear = GPIO_CPU_LED|GPIO_WDI;
+ wdi_status = 1;
+ }
+}
+
+long int initdram(int board_type)
+{
+ /* Sdram is setup by assembler code */
+ /* If memory could be changed, we should return the true value here */
+
+ WATCHDOG_RESET();
+
+ return (SDRAM_SIZE);
+}
+
+/* In cpu/mips/cpu.c */
+void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
+
+void set_ledcard(u32 value){
+ /* Clock 24 bits to led card */
+ int i;
+ volatile u32 *sys_outputset = (volatile u32*)SYS_OUTPUTSET;
+ volatile u32 *sys_outputclr = (volatile u32*)SYS_OUTPUTCLR;
+
+ /* Start with known values */
+ *sys_outputclr = GPIO_LEDCLK|GPIO_LEDD;
+
+ for(i=0;i<24;i++){
+ if(value&0x00800000){
+ *sys_outputset = GPIO_LEDD;
+ }
+ else{
+ *sys_outputclr = GPIO_LEDD;
+ }
+ udelay(1);
+ *sys_outputset = GPIO_LEDCLK;
+ udelay(1);
+ *sys_outputclr = GPIO_LEDCLK;
+ udelay(1);
+
+ value<<=1;
+ }
+ /* Data is enable output */
+ *sys_outputset = GPIO_LEDD;
+}
+
+int checkboard (void)
+{
+ volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL;
+ volatile u32 *sys_outputset = (volatile u32*)SYS_OUTPUTSET;
+ volatile u32 *sys_outputclr = (volatile u32*)SYS_OUTPUTCLR;
+ u32 proc_id;
+
+ WATCHDOG_RESET();
+
+ *sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
+
+ proc_id = read_32bit_cp0_register(CP0_PRID);
+
+ switch (proc_id >> 24) {
+ case 0:
+ puts ("Board: GTH2\n");
+ printf ("CPU: Au1000 500 MHz, id: 0x%02x, rev: 0x%02x\n",
+ (proc_id >> 8) & 0xFF, proc_id & 0xFF);
+ break;
+ default:
+ printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
+ }
+#ifdef CONFIG_IDE_PCMCIA
+ /* PCMCIA is on a 36 bit physical address.
+ We need to map it into a 32 bit addresses */
+ write_one_tlb(20, /* index */
+ 0x01ffe000, /* Pagemask, 16 MB pages */
+ CFG_PCMCIA_IO_BASE, /* Hi */
+ 0x3C000017, /* Lo0 */
+ 0x3C200017); /* Lo1 */
+
+ write_one_tlb(21, /* index */
+ 0x01ffe000, /* Pagemask, 16 MB pages */
+ CFG_PCMCIA_ATTR_BASE, /* Hi */
+ 0x3D000017, /* Lo0 */
+ 0x3D200017); /* Lo1 */
+
+ write_one_tlb(22, /* index */
+ 0x01ffe000, /* Pagemask, 16 MB pages */
+ CFG_PCMCIA_MEM_ADDR, /* Hi */
+ 0x3E000017, /* Lo0 */
+ 0x3E200017); /* Lo1 */
+
+#endif /* CONFIG_IDE_PCMCIA */
+
+ /* Wait for GPIO ports to become stable */
+ udelay(5000); /* FIXME */
+
+ /* Release reset of ethernet PHY chips */
+ /* Always do this, because linux does not know about it */
+ *sys_outputset = GPIO_ERESET;
+
+ /* Kill FPGA:s */
+ *sys_outputclr = GPIO_CACONFIG|GPIO_DPACONFIG;
+ udelay(2);
+ *sys_outputset = GPIO_CACONFIG|GPIO_DPACONFIG;
+
+ /* Turn front led yellow */
+ set_ledcard(0x00100000);
+
+ return 0;
+}
+
+#define POWER_OFFSET 0xF0000
+#define SW_WATCHDOG_REASON 13
+
+#define BOOTDATA_OFFSET 0xF8000
+#define MAX_ATTEMPTS 5
+
+#define FAILSAFE_BOOT 1
+#define SYSTEM_BOOT 2
+#define SYSTEM2_BOOT 3
+
+#define WRITE_FLASH16(a, d) \
+do \
+{ \
+ *((volatile u16 *) (a)) = (d);\
+ } while(0)
+
+static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
+{
+ u16 data;
+ volatile u16 *flash = (u16 *) (CFG_FLASH_BASE);
+
+ switch(System){
+ case FAILSAFE_BOOT:
+ printf ("Setting failsafe boot in flash\n");
+ break;
+ case SYSTEM_BOOT:
+ printf ("Setting system boot in flash\n");
+ break;
+ case SYSTEM2_BOOT:
+ printf ("Setting system2 boot in flash\n");
+ break;
+ default:
+ printf ("Invalid system data %u, setting failsafe\n", System);
+ System = FAILSAFE_BOOT;
+ }
+
+ if ((Count < 1) | (Count > MAX_ATTEMPTS)) {
+ printf ("Invalid boot count %u, setting 1\n", Count);
+ Count = 1;
+ }
+
+ printf ("Boot attempt %d\n", Count);
+
+ data = (System << 8) | Count;
+ /* AMD 16 bit */
+ WRITE_FLASH16 (&flash[0x555], 0xAAAA);
+ WRITE_FLASH16 (&flash[0x2AA], 0x5555);
+ WRITE_FLASH16 (&flash[0x555], 0xA0A0);
+
+ WRITE_FLASH16 (addr, data);
+}
+
+static int random_system(void){
+ /* EEPROM read failed. Just try to choose one
+ system release and hope it works */
+
+ /* FIXME */
+ return(SYSTEM_BOOT);
+}
+
+static int switch_system(int old_system){
+ u8 Rx[10];
+ u8 Tx[5];
+ int valid_release;
+
+ if(old_system==FAILSAFE_BOOT){
+ /* Find out which system release to use */
+
+ /* Copy from nvram to scratchpad */
+ Tx[0] = RECALL_MEMORY;
+ Tx[1] = 7; /* Page */
+ if (ee_do_cpu_command (Tx, 2, NULL, 0, 1)) {
+ printf ("EE user page 7 recall failed\n");
+ return (random_system());
+ }
+
+ Tx[0] = READ_SCRATCHPAD;
+ if (ee_do_cpu_command (Tx, 2, Rx, 9, 1)) {
+ printf ("EE user page 7 read failed\n");
+ return (random_system());
+ }
+ /* Crc in 9:th byte */
+ if (!ee_crc_ok (Rx, 8, *(Rx + 8))) {
+ printf ("EE read failed, page 7. CRC error\n");
+ return (random_system());
+ }
+
+ valid_release = Rx[7];
+ if((valid_release==0xFF)|
+ ((valid_release&1) == 0)){
+ return(SYSTEM_BOOT);
+ }
+ else{
+ return(SYSTEM2_BOOT);
+ }
+ }
+ else{
+ return(FAILSAFE_BOOT);
+ }
+}
+
+static void check_boot_tries (void)
+{
+ /* Count the number of boot attemps
+ switch system if too many */
+
+ int i;
+ volatile u16 *addr;
+ volatile u16 data;
+ u8 system = FAILSAFE_BOOT;
+ u8 count;
+
+ addr = (u16 *) (CFG_FLASH_BASE + BOOTDATA_OFFSET);
+
+ if (*addr == 0xFFFF) {
+ printf ("*** No bootdata exists. ***\n");
+ write_bootdata (addr, FAILSAFE_BOOT, 1);
+ } else {
+ /* Search for latest written bootdata */
+ i = 0;
+ while ((*(addr + 1) != 0xFFFF) & (i < 8000)) {
+ addr++;
+ i++;
+ }
+ if (i >= 8000) {
+ /* Whoa, dont write any more */
+ printf ("*** No bootdata found. Not updating flash***\n");
+ } else {
+ /* See how many times we have tried to boot real system */
+ data = *addr;
+ system = data >> 8;
+ count = data & 0xFF;
+ if ((system != SYSTEM_BOOT) &
+ (system != SYSTEM2_BOOT) &
+ (system != FAILSAFE_BOOT)) {
+ printf ("*** Wrong system %d\n", system);
+ system = FAILSAFE_BOOT;
+ count = 1;
+ } else {
+ switch (count) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ /* Try same system again if needed */
+ count++;
+ break;
+
+ case 5:
+ /* Switch system and reset tries */
+ count = 1;
+ system = switch_system(system);
+ printf ("***Too many boot attempts, switching system***\n");
+ break;
+ default:
+ /* Switch system, start over and hope it works */
+ printf ("***Unexpected data on addr 0x%x, %u***\n",
+ (u32) addr, data);
+ count = 1;
+ system = switch_system(system);
+ }
+ }
+ write_bootdata (addr + 1, system, count);
+ }
+ }
+ switch(system){
+ case FAILSAFE_BOOT:
+ printf ("Booting failsafe system\n");
+ setenv ("bootargs", "panic=1 root=/dev/hda7");
+ setenv ("bootcmd", "ide reset;disk 0x81000000 0:5;run addmisc;bootm");
+ break;
+
+ case SYSTEM_BOOT:
+ printf ("Using normal system\n");
+ setenv ("bootargs", "panic=1 root=/dev/hda4");
+ setenv ("bootcmd", "ide reset;disk 0x81000000 0:2;run addmisc;bootm");
+ break;
+
+ case SYSTEM2_BOOT:
+ printf ("Using normal system2\n");
+ setenv ("bootargs", "panic=1 root=/dev/hda9");
+ setenv ("bootcmd", "ide reset;disk 0x81000000 0:8;run addmisc;bootm");
+ break;
+ default:
+ printf ("Invalid system %d\n", system);
+ printf ("Hanging\n");
+ while(1);
+ }
+}
+
+int misc_init_r(void){
+ u8 Rx[80];
+ u8 Tx[5];
+ int page;
+ int read = 0;
+
+ WATCHDOG_RESET();
+
+ if (ee_init_cpu_data ()) {
+ printf ("EEPROM init failed\n");
+ return (0);
+ }
+
+ /* Check which release to boot */
+ check_boot_tries ();
+
+ /* Read the pages where ethernet address is stored */
+
+ for (page = EE_USER_PAGE_0; page <= EE_USER_PAGE_0 + 2; page++) {
+ /* Copy from nvram to scratchpad */
+ Tx[0] = RECALL_MEMORY;
+ Tx[1] = page;
+ if (ee_do_cpu_command (Tx, 2, NULL, 0, 1)) {
+ printf ("EE user page %d recall failed\n", page);
+ return (0);
+ }
+
+ Tx[0] = READ_SCRATCHPAD;
+ if (ee_do_cpu_command (Tx, 2, Rx + read, 9, 1)) {
+ printf ("EE user page %d read failed\n", page);
+ return (0);
+ }
+ /* Crc in 9:th byte */
+ if (!ee_crc_ok (Rx + read, 8, *(Rx + read + 8))) {
+ printf ("EE read failed, page %d. CRC error\n", page);
+ return (0);
+ }
+ read += 8;
+ }
+
+ /* Add eos after eth addr */
+ Rx[17] = 0;
+
+ printf ("Ethernet addr read from eeprom: %s\n\n", Rx);
+
+ if ((Rx[2] != ':') |
+ (Rx[5] != ':') |
+ (Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) {
+ printf ("*** ethernet addr invalid, using default ***\n");
+ } else {
+ setenv ("ethaddr", Rx);
+ }
+ return (0);
+}
diff --git a/board/gth2/lowlevel_init.S b/board/gth2/lowlevel_init.S
new file mode 100644
index 0000000..62e3657
--- /dev/null
+++ b/board/gth2/lowlevel_init.S
@@ -0,0 +1,454 @@
+/* Memory sub-system initialization code */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+#include <asm/au1x00.h>
+#include <asm/mipsregs.h>
+
+#define CP0_Config0 $16
+#define MEM_1MS ((CFG_MHZ) * 1000)
+#define GPIO_RJ1LY (1<<22)
+#define GPIO_CFRESET (1<<10)
+
+ .text
+ .set noreorder
+ .set mips32
+
+ .globl lowlevel_init
+lowlevel_init:
+ /*
+ * Step 2) Establish Status Register
+ * (set BEV, clear ERL, clear EXL, clear IE)
+ */
+ li t1, 0x00400000
+ mtc0 t1, CP0_STATUS
+
+ /*
+ * Step 3) Establish CP0 Config0
+ * (set OD, set K0=3)
+ */
+ li t1, 0x00080003
+ mtc0 t1, CP0_CONFIG
+
+ /*
+ * Step 4) Disable Watchpoint facilities
+ */
+ li t1, 0x00000000
+ mtc0 t1, CP0_WATCHLO
+ mtc0 t1, CP0_IWATCHLO
+ /*
+ * Step 5) Disable the performance counters
+ */
+ mtc0 zero, CP0_PERFORMANCE
+ nop
+
+ /*
+ * Step 6) Establish EJTAG Debug register
+ */
+ mtc0 zero, CP0_DEBUG
+ nop
+
+ /*
+ * Step 7) Establish Cause
+ * (set IV bit)
+ */
+ li t1, 0x00800000
+ mtc0 t1, CP0_CAUSE
+
+ /* Establish Wired (and Random) */
+ mtc0 zero, CP0_WIRED
+ nop
+
+ /* No workaround if running from ram */
+ lui t0, 0xffc0
+ lui t3, 0xbfc0
+ and t1, ra, t0
+ bne t1, t3, noCacheJump
+ nop
+
+ /*** From AMD YAMON ***/
+ /*
+ * Step 8) Initialize the caches
+ */
+ li t0, (16*1024)
+ li t1, 32
+ li t2, 0x80000000
+ addu t3, t0, t2
+cacheloop:
+ cache 0, 0(t2)
+ cache 1, 0(t2)
+ addu t2, t1
+ bne t2, t3, cacheloop
+ nop
+
+ /* Save return address */
+ move t3, ra
+
+ /* Run from cacheable space now */
+ bal cachehere
+ nop
+cachehere:
+ li t1, ~0x20000000 /* convert to KSEG0 */
+ and t0, ra, t1
+ addi t0, 5*4 /* 5 insns beyond cachehere */
+ jr t0
+ nop
+
+ /* Restore return address */
+ move ra, t3
+
+ /*
+ * Step 9) Initialize the TLB
+ */
+ li t0, 0 # index value
+ li t1, 0x00000000 # entryhi value
+ li t2, 32 # 32 entries
+
+tlbloop:
+ /* Probe TLB for matching EntryHi */
+ mtc0 t1, CP0_ENTRYHI
+ tlbp
+ nop
+
+ /* Examine Index[P], 1=no matching entry */
+ mfc0 t3, CP0_INDEX
+ li t4, 0x80000000
+ and t3, t4, t3
+ addiu t1, t1, 1 # increment t1 (asid)
+ beq zero, t3, tlbloop
+ nop
+
+ /* Initialize the TLB entry */
+ mtc0 t0, CP0_INDEX
+ mtc0 zero, CP0_ENTRYLO0
+ mtc0 zero, CP0_ENTRYLO1
+ mtc0 zero, CP0_PAGEMASK
+ tlbwi
+
+ /* Do it again */
+ addiu t0, t0, 1
+ bne t0, t2, tlbloop
+ nop
+
+ /* First setup pll:s to make serial work ok */
+ /* We have a 12.5 MHz crystal */
+ li t0, SYS_CPUPLL
+ li t1, 0x28 /* CPU clock, 500 MHz */
+ sw t1, 0(t0)
+ sync
+ nop
+ nop
+
+ /* wait 1mS for clocks to settle */
+ li t1, MEM_1MS
+1: add t1, -1
+ bne t1, zero, 1b
+ nop
+ /* Setup AUX PLL */
+ li t0, SYS_AUXPLL
+ li t1, 0
+ sw t1, 0(t0) /* aux pll */
+ sync
+
+ /* Static memory controller */
+ /* RCE0 - can not change while fetching, do so from icache */
+ move t2, ra /* Store return address */
+ bal getAddr
+ nop
+
+getAddr:
+ move t1, ra
+ move ra, t2 /* Move return addess back */
+
+ cache 0x14,0(t1)
+ cache 0x14,32(t1)
+ /*** /From YAMON ***/
+
+noCacheJump:
+
+ /* Static memory controller */
+
+ /* RCE0 AMD 29LV800 Flash */
+ li t0, MEM_STCFG0
+ li t1, 0x00000243
+ sw t1, 0(t0)
+
+ li t0, MEM_STTIME0
+ li t1, 0x040181D7 /* FIXME */
+ sw t1, 0(t0)
+
+ li t0, MEM_STADDR0
+ li t1, 0x11E03F80
+ sw t1, 0(t0)
+
+ /* RCE1 PCMCIA 250ns */
+ li t0, MEM_STCFG1
+ li t1, 0x00000002
+ sw t1, 0(t0)
+
+ li t0, MEM_STTIME1
+ li t1, 0x280E3E07
+ sw t1, 0(t0)
+
+ li t0, MEM_STADDR1
+ li t1, 0x10000000
+ sw t1, 0(t0)
+
+ /* RCE2 CP Altera */
+ li t0, MEM_STCFG2
+ li t1, 0x00000280 /* BE, EW */
+ sw t1, 0(t0)
+
+ li t0, MEM_STTIME2
+ li t1, 0x0303000c
+ sw t1, 0(t0)
+
+ li t0, MEM_STADDR2
+ li t1, 0x10c03f80 /* 1 MB */
+ sw t1, 0(t0)
+
+ /* RCE3 DP Altera */
+ li t0, MEM_STCFG3
+ li t1, 0x00000280 /* BE, EW */
+ sw t1, 0(t0)
+
+ li t0, MEM_STTIME3
+ li t1, 0x0303000c
+ sw t1, 0(t0)
+
+ li t0, MEM_STADDR3
+ li t1, 0x10e03f80 /* 1 MB */
+ sw t1, 0(t0)
+
+ sync
+
+ /* Set peripherals to a known state */
+ li t0, IC0_CFG0CLR
+ li t1, 0xFFFFFFFF
+ sw t1, 0(t0)
+
+ li t0, IC0_CFG0CLR
+ sw t1, 0(t0)
+
+ li t0, IC0_CFG1CLR
+ sw t1, 0(t0)
+
+ li t0, IC0_CFG2CLR
+ sw t1, 0(t0)
+
+ li t0, IC0_SRCSET
+ sw t1, 0(t0)
+
+ li t0, IC0_ASSIGNSET
+ sw t1, 0(t0)
+
+ li t0, IC0_WAKECLR
+ sw t1, 0(t0)
+
+ li t0, IC0_RISINGCLR
+ sw t1, 0(t0)
+
+ li t0, IC0_FALLINGCLR
+ sw t1, 0(t0)
+
+ li t0, IC0_TESTBIT
+ li t1, 0x00000000
+ sw t1, 0(t0)
+ sync
+
+ li t0, IC1_CFG0CLR
+ li t1, 0xFFFFFFFF
+ sw t1, 0(t0)
+
+ li t0, IC1_CFG0CLR
+ sw t1, 0(t0)
+
+ li t0, IC1_CFG1CLR
+ sw t1, 0(t0)
+
+ li t0, IC1_CFG2CLR
+ sw t1, 0(t0)
+
+ li t0, IC1_SRCSET
+ sw t1, 0(t0)
+
+ li t0, IC1_ASSIGNSET
+ sw t1, 0(t0)
+
+ li t0, IC1_WAKECLR
+ sw t1, 0(t0)
+
+ li t0, IC1_RISINGCLR
+ sw t1, 0(t0)
+
+ li t0, IC1_FALLINGCLR
+ sw t1, 0(t0)
+
+ li t0, IC1_TESTBIT
+ li t1, 0x00000000
+ sw t1, 0(t0)
+ sync
+
+ li t0, SYS_FREQCTRL0
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, SYS_FREQCTRL1
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, SYS_CLKSRC
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, SYS_PININPUTEN
+ li t1, 0x00000000
+ sw t1, 0(t0)
+ sync
+
+ li t0, 0xB1100100
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, 0xB1400100
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+
+ li t0, SYS_WAKEMSK
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, SYS_WAKESRC
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ /* wait 1mS before setup */
+ li t1, MEM_1MS
+1: add t1, -1
+ bne t1, zero, 1b
+ nop
+
+
+/* SDCS 0 SDRAM */
+ li t0, MEM_SDMODE0
+ li t1, 0x592CD1
+ sw t1, 0(t0)
+
+ li t0, MEM_SDMODE1
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, MEM_SDMODE2
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+/* 64 MB SDRAM at addr 0 */
+ li t0, MEM_SDADDR0
+ li t1, 0x001003F0
+ sw t1, 0(t0)
+
+
+ li t0, MEM_SDADDR1
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, MEM_SDADDR2
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ sync
+
+ li t0, MEM_SDREFCFG
+ li t1, 0x880007A1 /* Disable */
+ sw t1, 0(t0)
+ sync
+
+ li t0, MEM_SDPRECMD
+ sw zero, 0(t0)
+ sync
+
+ li t0, MEM_SDAUTOREF
+ sw zero, 0(t0)
+ sync
+ sw zero, 0(t0)
+ sync
+
+ li t0, MEM_SDREFCFG
+ li t1, 0x8A0007A1 /* Enable */
+ sw t1, 0(t0)
+ sync
+
+ li t0, MEM_SDWRMD0
+ li t1, 0x00000023
+ sw t1, 0(t0)
+ sync
+
+ /* wait 1mS after setup */
+ li t1, MEM_1MS
+1: add t1, -1
+ bne t1, zero, 1b
+ nop
+
+ /* Setup GPIO pins */
+
+ li t0, SYS_PINFUNC
+ li t1, 0x00007025 /* 0x8080 */
+ sw t1, 0(t0)
+
+ li t0, SYS_TRIOUTCLR
+ li t1, 0xFFFFFFFF /* 0x1FFF */
+ sw t1, 0(t0)
+
+ /* Turn yellow front led on */
+ /* Release reset on CF */
+ li t0, SYS_OUTPUTCLR
+ li t1, GPIO_RJ1LG
+ sw t1, 0(t0)
+ li t0, SYS_OUTPUTSET
+ li t1, GPIO_RJ1LY|GPIO_CFRESET
+ sw t1, 0(t0)
+ sync
+ j clearmem
+ nop
+
+ .globl memtest
+memtest:
+ /* Fill memory with address */
+ li t0, 0x80000000
+ li t1, 0xFFF000 /* 64 MB */
+mt0: sw t0, 0(t0)
+ add t1, -1
+ add t0, 4
+ bne t1, zero, mt0
+ nop
+ nop
+ /* Verify addr */
+ li t0, 0x80000000
+ li t1, 0xFFF000 /* 64 MB */
+mt1: lw t2, 0(t0)
+ bne t0, t2, memhang
+ add t1, -1
+ add t0, 4
+ bne t1, zero, mt1
+ nop
+ nop
+ .globl clearmem
+clearmem:
+ /* Clear memory */
+ li t0, 0x80000000
+ li t1, 0xFFF000 /* 64 MB */
+mtc: sw zero, 0(t0)
+ add t1, -1
+ add t0, 4
+ bne t1, zero, mtc
+ nop
+ nop
+memtestend:
+ j ra
+ nop
+
+memhang:
+ b memhang
+ nop
diff --git a/board/gth2/u-boot.lds b/board/gth2/u-boot.lds
new file mode 100644
index 0000000..8ba0b6d
--- /dev/null
+++ b/board/gth2/u-boot.lds
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
diff --git a/board/tqm5200/Makefile b/board/tqm5200/Makefile
index c234332..ab0ff1a 100644
--- a/board/tqm5200/Makefile
+++ b/board/tqm5200/Makefile
@@ -25,7 +25,6 @@
LIB = lib$(BOARD).a
-#OBJS := $(BOARD).o flash.o
OBJS := $(BOARD).o cmd_stk52xx.o
$(LIB): $(OBJS) $(SOBJS)
diff --git a/board/tqm5200/flash.c b/board/tqm5200/flash.c
deleted file mode 100644
index af4d78a..0000000
--- a/board/tqm5200/flash.c
+++ /dev/null
@@ -1,497 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*
- * CPU to flash interface is 32-bit, so make declaration accordingly
- */
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define FLASH_CYCLE1 0x0555
-#define FLASH_CYCLE2 0x02aa
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
- unsigned long size = 0;
- extern void flash_preinit(void);
- ulong flashbase = CFG_FLASH_BASE;
-
- flash_preinit();
-
- /* Init: no FLASHes known */
- memset(&flash_info[0], 0, sizeof(flash_info_t));
-
- flash_info[0].size =
- flash_get_size((FPW *)flashbase, &flash_info[0]);
-
- size = flash_info[0].size;
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
- flash_get_info(CFG_MONITOR_BASE));
-#endif
-
-#ifdef CFG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR+CFG_ENV_SIZE-1,
- flash_get_info(CFG_ENV_ADDR));
-#endif
-
- return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
- FPWV *base = (FPWV *)(info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = (FPW)0x00FF00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = (FPW)0x00F000F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
- int i;
- flash_info_t * info;
-
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
- info = & flash_info[i];
- if (info->size && info->start[0] <= base &&
- base <= info->start[0] + info->size - 1)
- break;
- }
-
- return i == CFG_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AMLV128U:
- printf ("AM29LV128ML (128Mbit, uniform sector size)\n");
- break;
- case FLASH_AM160B:
- printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
- info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
- int i;
- ulong base = (ulong)addr;
-
- /* Write auto select command: read Manufacturer ID */
- /* Write auto select command sequence and test FLASH answer */
- addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */
-
- /* The manufacturer codes are only 1 byte, so just use 1 byte.
- * This works for any bus width and any FLASH device width.
- */
- udelay(100);
- switch (addr[0] & 0xff) {
-
- case (uchar)AMD_MANUFACT:
- debug ("Manufacturer: AMD (Spansion)\n");
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (uchar)INTEL_MANUFACT:
- debug ("Manufacturer: Intel (not supported yet)\n");
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
- /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
- if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[1]) {
-
- case (FPW)AMD_ID_LV160B:
- debug ("Chip: AM29LV160MB\n");
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- /*
- * The first 4 sectors are 16 kB, 8 kB, 8 kB and 32 kB, all
- * the other ones are 64 kB
- */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for( i = 4; i < info->sector_count; i++ )
- info->start[i] =
- base + (i * 2 * (64 << 10)) - 0x00060000;
- break; /* => 4 MB */
-
- case AMD_ID_MIRROR:
- debug ("Mirror Bit flash: addr[14] = %08lX addr[15] = %08lX\n",
- addr[14], addr[15]);
-
- switch(addr[14]) {
- case AMD_ID_LV128U_2:
- if (addr[15] != AMD_ID_LV128U_3) {
- debug ("Chip: AM29LVxxxM -> unknown\n");
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- } else {
- debug ("Chip: AM29LV128M\n");
- info->flash_id += FLASH_AMLV128U;
- info->sector_count = 256;
- info->size = 0x02000000;
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base;
- base += 0x20000;
- }
- }
- break; /* => 32 MB */
- default:
- debug ("Chip: *** unknown ***\n");
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- }
-
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
- while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
- addr[0] = 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- /*
- * Get lower word aligned address. Assumes 32 bit flash bus width.
- */
- wp = (addr & ~3);
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word_amd(info, (FPW *)wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word_amd(info, (FPW *)wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word_amd(info, (FPW *)wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
- ulong start;
- int flag;
- FPWV *base; /* first address in flash bank */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- base = (FPWV *)(info->start[0]);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer (0);
-
- /* data polling for D7 */
- while ((*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- *dest = (FPW)0x00F000F0; /* reset bank */
- return (1);
- }
- }
- return (0);
-}
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 6aad920..310abd2 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -254,13 +254,7 @@
puts ("Board: AEVFIFO\n");
return 0;
#endif
-#if defined (CONFIG_TQM5200_AA)
- puts ("Board: TQM5200-AA (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200_AB)
- puts ("Board: TQM5200-AB (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200_AC)
- puts ("Board: TQM5200-AC (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200)
+#if defined (CONFIG_TQM5200)
puts ("Board: TQM5200 (TQ-Components GmbH)\n");
#endif
#if defined (CONFIG_STK52XX)
@@ -572,17 +566,7 @@
void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
-#if defined (CONFIG_TQM5200_AA)
- strcpy (info, " Board: TQM5200-AA (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200_AB)
- strcpy (info, " Board: TQM5200-AB (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200_AC)
- strcpy (info, " Board: TQM5200-AC (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200)
- strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#else
-#error No supported board selected
-#endif
+ strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
#if defined (CONFIG_STK52XX)
} else if (line_number == 2) {
strcpy (info, " on a STK52XX baseboard");
diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c
index b5c12e3..d992aec 100644
--- a/board/tqm834x/tqm834x.c
+++ b/board/tqm834x/tqm834x.c
@@ -406,4 +406,28 @@
(DDR_REFINT_166MHZ_7US << SDRAM_INTERVAL_REFINT_SHIFT) |
(DDR_BSTOPRE << SDRAM_INTERVAL_BSTOPRE_SHIFT);
SYNC;
+
+ /* Workaround for DDR6 Erratum
+ * see MPC8349E Device Errata Rev.8, 2/2006
+ * This workaround influences the MPC internal "input enables"
+ * dependent on CAS latency and MPC revision. According to errata
+ * sheet the internal reserved registers for this workaround are
+ * not available from revision 2.0 and up.
+ */
+
+ /* Get REVID from register SPRIDR. Skip workaround if rev >= 2.0
+ * (0x200)
+ */
+ if ((im->sysconf.spridr & SPRIDR_REVID) < 0x200) {
+
+ /* There is a internal reserved register at IMMRBAR+0x2F00
+ * which has to be written with a certain value defined by
+ * errata sheet.
+ */
+#if defined(DDR_CASLAT_20)
+ *((u8 *)im + 0x2f00) = 0x201c0000;
+#else
+ *((u8 *)im + 0x2f00) = 0x202c0000;
+#endif
+ }
}
diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c
index 69b9101..befe8b7 100644
--- a/board/tqm85xx/tqm85xx.c
+++ b/board/tqm85xx/tqm85xx.c
@@ -27,6 +27,9 @@
* MA 02111-1307 USA
*/
+#ifdef CONFIG_PS2MULT
+void ps2mult_early_init(void);
+#endif
#include <common.h>
#include <pci.h>
@@ -410,3 +413,14 @@
pci_mpc85xx_init (&hose);
#endif /* CONFIG_PCI */
}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_R
+int board_early_init_r (void)
+{
+#ifdef CONFIG_PS2MULT
+ ps2mult_early_init();
+#endif /* CONFIG_PS2MULT */
+ return (0);
+}
+#endif /* CONFIG_BOARD_EARLY_INIT_R */
+
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 00eb385..edea8f0 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -729,6 +729,7 @@
/* blink LED. This function does not return! */
while (1) {
+ reset_timer_masked ();
led_set (1);
udelay (1000000 / LED_BLINK_FREQ / 2);
led_set (0);
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 868a899..346406e 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -161,6 +161,19 @@
uchar *str;
int i;
+#ifdef CONFIG_VERSION_VARIABLE
+ {
+ /* Set version variable. Please note, that this variable is
+ * also set in main_loop() later in the boot process. The
+ * version variable has to be set this early, because so it
+ * could be used in script files on an usb stick, which
+ * might be called during do_auto_update() */
+ extern char version_string[];
+
+ setenv ("ver", version_string);
+ }
+#endif /* CONFIG_VERSION_VARIABLE */
+
#ifdef CONFIG_AUTO_UPDATE
extern int do_auto_update(void);
/* this has priority over all else */
diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index ca68682..382a85b 100644
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -223,7 +223,7 @@
u16 res;
tsc2000_set_mux(channel);
- udelay(3 * TSC2000_DELAY_BASE);
+ udelay(20 * TSC2000_DELAY_BASE);
tsc2000_write(TSC2000_REG_ADC, 0x2036);
adc_wait_conversion_done ();
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index cea8b0b..2f1e7d7 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -358,6 +358,8 @@
*/
int vfd_init_clocks (void)
{
+ int i;
+
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
@@ -367,7 +369,9 @@
*/
gpio->PCUP = (gpio->PCUP & 0xFFF0); /* activate GPC0...GPC3 pullups */
gpio->PCCON = (gpio->PCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */
- udelay (10); /* allow signals to settle */
+ /* allow signals to settle */
+ for (i=0; i<10000; i++) /* udelay isn't working yet at this point! */
+ __asm("NOP");
vfd_board_id = (~gpio->PCDAT) & 0x000F; /* read GPC0...GPC3 port pins */
VFD_DISABLE; /* activate blank for the vfd */
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 41621ba..a415502 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -855,7 +855,7 @@
/* We only need to swap data if we are running on a big endian cpu. */
/* But Au1x00 cpu:s already swaps data in big endian mode! */
-#if defined(__LITTLE_ENDIAN) || defined(CONFIG_AU1X00)
+#if defined(__LITTLE_ENDIAN) || ( defined(CONFIG_AU1X00) && !defined(CONFIG_GTH2) )
#define input_swap_data(x,y,z) input_data(x,y,z)
#else
static void
@@ -881,8 +881,13 @@
debug("in input swap data base for read is %lx\n", (unsigned long) pbuf);
while (words--) {
+#ifdef __MIPS__
+ *dbuf++ = swab16p((u16*)pbuf);
+ *dbuf++ = swab16p((u16*)pbuf);
+#else
*dbuf++ = ld_le16(pbuf);
*dbuf++ = ld_le16(pbuf);
+#endif /* !MIPS */
}
#endif
}
diff --git a/common/serial.c b/common/serial.c
index 2acbd08..7b29951 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -41,7 +41,7 @@
|| defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
return &serial_scc_device;
#elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
- || defined(CONFIG_405EP)
+ || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
return &serial0_device;
#else
#error No default console
@@ -75,7 +75,7 @@
#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
- || defined(CONFIG_405EP)
+ || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
serial_register(&serial0_device);
serial_register(&serial1_device);
#endif
diff --git a/cpu/arm920t/s3c24x0/i2c.c b/cpu/arm920t/s3c24x0/i2c.c
index ef56cd1..374b683 100644
--- a/cpu/arm920t/s3c24x0/i2c.c
+++ b/cpu/arm920t/s3c24x0/i2c.c
@@ -153,7 +153,7 @@
#endif
#ifdef CONFIG_S3C2400
/* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
- gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00000c00;
+ gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00001000;
#endif
/* toggle I2CSCL until bus idle */
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index cacb9f0..6cb523d 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -23,6 +23,9 @@
* Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
* changes based on the file arch/ppc/mbxboot/m8260_tty.c from the
* Linux/PPC sources (m8260_tty.c had no copyright info in it).
+ *
+ * Martin Krause, 8 Jun 2006
+ * Added CONFIG_SERIAL_MULTI support
*/
/*
@@ -33,6 +36,10 @@
#include <common.h>
#include <mpc5xxx.h>
+#if defined (CONFIG_SERIAL_MULTI)
+#include <serial.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_PSC_CONSOLE)
@@ -55,9 +62,41 @@
#error CONFIG_PSC_CONSOLE must be in 1 ... 6
#endif
+#if defined(CONFIG_SERIAL_MULTI) && !defined(CONFIG_PSC_CONSOLE2)
+#error you must define CONFIG_PSC_CONSOLE2 if CONFIG_SERIAL_MULTI is set
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+#if CONFIG_PSC_CONSOLE2 == 1
+#define PSC_BASE2 MPC5XXX_PSC1
+#elif CONFIG_PSC_CONSOLE2 == 2
+#define PSC_BASE2 MPC5XXX_PSC2
+#elif CONFIG_PSC_CONSOLE2 == 3
+#define PSC_BASE2 MPC5XXX_PSC3
+#elif defined(CONFIG_MGT5100)
+#error CONFIG_PSC_CONSOLE2 must be in 1, 2 or 3
+#elif CONFIG_PSC_CONSOLE2 == 4
+#define PSC_BASE2 MPC5XXX_PSC4
+#elif CONFIG_PSC_CONSOLE2 == 5
+#define PSC_BASE2 MPC5XXX_PSC5
+#elif CONFIG_PSC_CONSOLE2 == 6
+#define PSC_BASE2 MPC5XXX_PSC6
+#else
+#error CONFIG_PSC_CONSOLE2 must be in 1 ... 6
+#endif
+#endif /* CONFIG_SERIAL_MULTI */
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_init_dev (unsigned long dev_base)
+#else
int serial_init (void)
+#endif
{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
unsigned long baseclk;
int div;
@@ -100,13 +139,24 @@
return (0);
}
-void
-serial_putc(const char c)
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_putc_dev (unsigned long dev_base, const char c)
+#else
+void serial_putc(const char c)
+#endif
{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
if (c == '\n')
+#if defined(CONFIG_SERIAL_MULTI)
+ serial_putc_dev (dev_base, '\r');
+#else
serial_putc('\r');
+#endif
/* Wait for last character to go. */
while (!(psc->psc_status & PSC_SR_TXEMP))
@@ -115,18 +165,32 @@
psc->psc_buffer_8 = c;
}
-void
-serial_puts (const char *s)
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_puts_dev (unsigned long dev_base, const char *s)
+#else
+void serial_puts (const char *s)
+#endif
{
while (*s) {
+#if defined(CONFIG_SERIAL_MULTI)
+ serial_putc_dev (dev_base, *s++);
+#else
serial_putc (*s++);
+#endif
}
}
-int
-serial_getc(void)
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_getc_dev (unsigned long dev_base)
+#else
+int serial_getc(void)
+#endif
{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
/* Wait for a character to arrive. */
while (!(psc->psc_status & PSC_SR_RXRDY))
@@ -135,18 +199,32 @@
return psc->psc_buffer_8;
}
-int
-serial_tstc(void)
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_tstc_dev (unsigned long dev_base)
+#else
+int serial_tstc(void)
+#endif
{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
return (psc->psc_status & PSC_SR_RXRDY);
}
-void
-serial_setbrg(void)
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_setbrg_dev (unsigned long dev_base)
+#else
+void serial_setbrg(void)
+#endif
{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
unsigned long baseclk, div;
#if defined(CONFIG_MGT5100)
@@ -160,4 +238,87 @@
psc->ctur = (div >> 8) & 0xFF;
psc->ctlr = div & 0xff;
}
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial0_init(void)
+{
+ return (serial_init_dev(PSC_BASE));
+}
+
+int serial1_init(void)
+{
+ return (serial_init_dev(PSC_BASE2));
+}
+void serial0_setbrg (void)
+{
+ serial_setbrg_dev(PSC_BASE);
+}
+void serial1_setbrg (void)
+{
+ serial_setbrg_dev(PSC_BASE2);
+}
+
+void serial0_putc(const char c)
+{
+ serial_putc_dev(PSC_BASE,c);
+}
+
+void serial1_putc(const char c)
+{
+ serial_putc_dev(PSC_BASE2, c);
+}
+void serial0_puts(const char *s)
+{
+ serial_puts_dev(PSC_BASE, s);
+}
+
+void serial1_puts(const char *s)
+{
+ serial_puts_dev(PSC_BASE2, s);
+}
+
+int serial0_getc(void)
+{
+ return(serial_getc_dev(PSC_BASE));
+}
+
+int serial1_getc(void)
+{
+ return(serial_getc_dev(PSC_BASE2));
+}
+int serial0_tstc(void)
+{
+ return (serial_tstc_dev(PSC_BASE));
+}
+
+int serial1_tstc(void)
+{
+ return (serial_tstc_dev(PSC_BASE2));
+}
+
+struct serial_device serial0_device =
+{
+ "serial0",
+ "UART0",
+ serial0_init,
+ serial0_setbrg,
+ serial0_getc,
+ serial0_tstc,
+ serial0_putc,
+ serial0_puts,
+};
+
+struct serial_device serial1_device =
+{
+ "serial1",
+ "UART1",
+ serial1_init,
+ serial1_setbrg,
+ serial1_getc,
+ serial1_tstc,
+ serial1_putc,
+ serial1_puts,
+};
+#endif /* CONFIG_SERIAL_MULTI */
+
#endif /* CONFIG_PSC_CONSOLE */
diff --git a/doc/README.serial_multi b/doc/README.serial_multi
index a8d48fc..40f7815 100644
--- a/doc/README.serial_multi
+++ b/doc/README.serial_multi
@@ -52,3 +52,29 @@
setenv stdout serial0
setenv stderr serial0
setenv stdin serial0
+
+MPC5xxx Specific
+================
+
+Up to two PSCs can be used as console.
+
+Support for hardware handshake has not been implemented yet.
+
+*) The first (default) console port is defined by:
+ #define CONFIG_PSC_CONSOLE <PSC number>
+
+*) The second (alternative) console port is defined by:
+ #define CONFIG_PSC_CONSOLE2 <PSC number>
+
+*) Commands to switch to the second console:
+ setenv stdout serial1
+ setenv stderr serial1
+ setenv stdin serial1
+
+*) Commands to switch to the first console:
+ setenv stdout serial0
+ setenv stderr serial0
+ setenv stdin serial0
+
+*) If a file descriptor is set to "serial" then the
+ current serial device will be used.
diff --git a/drivers/keyboard.c b/drivers/keyboard.c
index 1579095..41eccf2 100644
--- a/drivers/keyboard.c
+++ b/drivers/keyboard.c
@@ -33,7 +33,7 @@
#define KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */
-#ifdef CONFIG_MPC5xxx
+#if defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC85xx)
int ps2ser_check(void);
#endif
@@ -75,7 +75,7 @@
/* test if a character is in the queue */
static int kbd_testc(void)
{
-#ifdef CONFIG_MPC5xxx
+#if defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC85xx)
/* no ISR is used, so received chars must be polled */
ps2ser_check();
#endif
@@ -90,7 +90,7 @@
{
char c;
while(in_pointer==out_pointer) {
-#ifdef CONFIG_MPC5xxx
+#if defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC85xx)
/* no ISR is used, so received chars must be polled */
ps2ser_check();
#endif
diff --git a/drivers/ps2ser.c b/drivers/ps2ser.c
index 724fa40..8aea8fd 100644
--- a/drivers/ps2ser.c
+++ b/drivers/ps2ser.c
@@ -20,6 +20,9 @@
#include <asm/io.h>
#include <asm/atomic.h>
#include <ps2mult.h>
+#ifdef CFG_NS16550
+#include <ns16550.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -45,13 +48,24 @@
#else
#error CONFIG_PS2SERIAL must be in 1 ... 6
#endif
+
+#elif defined(CONFIG_MPC85xx)
+
+#if CONFIG_PS2SERIAL == 1
+#define COM_BASE (CFG_CCSRBAR+0x4500)
+#elif CONFIG_PS2SERIAL == 2
+#define COM_BASE (CFG_CCSRBAR+0x4600)
+#else
+#error CONFIG_PS2SERIAL must be in 1 ... 2
+#endif
-#endif /* CONFIG_MPC5xxx */
+
+#endif /* CONFIG_MPC5xxx / CONFIG_MPC85xx */
static int ps2ser_getc_hw(void);
static void ps2ser_interrupt(void *dev_id);
extern struct serial_state rs_table[]; /* in serial.c */
-#ifndef CONFIG_MPC5xxx
+#if !defined(CONFIG_MPC5xxx) && !defined(CONFIG_MPC85xx)
static struct serial_state *state;
#endif
@@ -106,7 +120,23 @@
return (0);
}
-#else /* !CONFIG_MPC5xxx */
+#elif defined(CONFIG_MPC85xx)
+int ps2ser_init(void)
+{
+ NS16550_t com_port = (NS16550_t)COM_BASE;
+
+ com_port->ier = 0x00;
+ com_port->lcr = LCR_BKSE | LCR_8N1;
+ com_port->dll = (CFG_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
+ com_port->dlm = ((CFG_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
+ com_port->lcr = LCR_8N1;
+ com_port->mcr = (MCR_DTR | MCR_RTS);
+ com_port->fcr = (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR);
+
+ return (0);
+}
+
+#else /* !CONFIG_MPC5xxx && !CONFIG_MPC85xx */
static inline unsigned int ps2ser_in(int offset)
{
@@ -150,12 +180,14 @@
return 0;
}
-#endif /* CONFIG_MPC5xxx */
+#endif /* CONFIG_MPC5xxx / CONFIG_MPC85xx / other */
void ps2ser_putc(int chr)
{
#ifdef CONFIG_MPC5xxx
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#elif defined(CONFIG_MPC85xx)
+ NS16550_t com_port = (NS16550_t)COM_BASE;
#endif
#ifdef DEBUG
printf(">>>> 0x%02x\n", chr);
@@ -165,6 +197,9 @@
while (!(psc->psc_status & PSC_SR_TXRDY));
psc->psc_buffer_8 = chr;
+#elif defined(CONFIG_MPC85xx)
+ while ((com_port->lsr & LSR_THRE) == 0);
+ com_port->thr = chr;
#else
while (!(ps2ser_in(UART_LSR) & UART_LSR_THRE));
@@ -176,6 +211,8 @@
{
#ifdef CONFIG_MPC5xxx
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#elif defined(CONFIG_MPC85xx)
+ NS16550_t com_port = (NS16550_t)COM_BASE;
#endif
int res = -1;
@@ -183,6 +220,10 @@
if (psc->psc_status & PSC_SR_RXRDY) {
res = (psc->psc_buffer_8);
}
+#elif defined(CONFIG_MPC85xx)
+ if (com_port->lsr & LSR_DR) {
+ res = com_port->rbr;
+ }
#else
if (ps2ser_in(UART_LSR) & UART_LSR_DR) {
res = (ps2ser_in(UART_RX));
@@ -238,6 +279,8 @@
{
#ifdef CONFIG_MPC5xxx
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#elif defined(CONFIG_MPC85xx)
+ NS16550_t com_port = (NS16550_t)COM_BASE;
#endif
int chr;
int status;
@@ -246,6 +289,8 @@
chr = ps2ser_getc_hw();
#ifdef CONFIG_MPC5xxx
status = psc->psc_status;
+#elif defined(CONFIG_MPC85xx)
+ status = com_port->lsr;
#else
status = ps2ser_in(UART_IIR);
#endif
@@ -260,6 +305,8 @@
}
#ifdef CONFIG_MPC5xxx
} while (status & PSC_SR_RXRDY);
+#elif defined(CONFIG_MPC85xx)
+ } while (status & LSR_DR);
#else
} while (status & UART_IIR_RDI);
#endif
diff --git a/include/asm-mips/au1x00.h b/include/asm-mips/au1x00.h
index 4e19dc4..a4e9947 100644
--- a/include/asm-mips/au1x00.h
+++ b/include/asm-mips/au1x00.h
@@ -119,6 +119,11 @@
return __ilog2(x & -x) + 1;
}
+#define gpio_set(Value) outl(Value, SYS_OUTPUTSET)
+#define gpio_clear(Value) outl(Value, SYS_OUTPUTCLR)
+#define gpio_read() inl(SYS_PINSTATERD)
+#define gpio_tristate(Value) outl(Value, SYS_TRIOUTCLR)
+
#endif /* !ASSEMBLY */
#ifdef CONFIG_PM
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 6020998..6b8759f 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,7 +37,6 @@
#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */
-#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
@@ -83,7 +82,7 @@
#define CONFIG_PCI_IO_SIZE 0x01000000
#define CONFIG_NET_MULTI 1
-#define CONFIG_EEPRO100
+#define CONFIG_EEPRO100 1
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
#endif /* CONFIG_STK52XX */
@@ -192,16 +191,6 @@
#undef CONFIG_BOOTARGS
-#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX "-AA\0"
-#elif defined (CONFIG_TQM5200_AB)
-# define CONFIG_U_BOOT_SUFFIX "-AB\0"
-#elif defined (CONFIG_TQM5200_AC)
-# define CONFIG_U_BOOT_SUFFIX "-AC\0"
-#else
-# define CONFIG_U_BOOT_SUFFIX "\0"
-#endif
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
@@ -218,7 +207,7 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"bootfile=/tftpboot/tqm5200/uImage\0" \
"load=tftp 200000 ${u-boot}\0" \
- "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \
+ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
"update=protect off FC000000 FC05FFFF;" \
"erase FC000000 FC05FFFF;" \
"cp.b 200000 FC000000 ${filesize};" \
@@ -284,13 +273,6 @@
#endif
/* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
-#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
- CFG_I2C_SLAVE }
-#elif defined (CONFIG_TQM5200_AC)
-#define I2C_ADDR_LIST { CFG_I2C_SLAVE }
-#endif
-
#if defined (CONFIG_MINIFAP)
#undef I2C_ADDR_LIST
#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
@@ -493,13 +475,9 @@
* SRAM - Do not map below 2 GB in address space, because this area is used
* for SDRAM autosizing.
*/
-#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
#define CFG_CS2_START 0xE5000000
-#ifdef CONFIG_TQM5200_AB
-#define CFG_CS2_SIZE 0x80000 /* 512 kByte */
-#else /* CONFIG_CS_AUTOCONF */
#define CFG_CS2_SIZE 0x100000 /* 1 MByte */
-#endif
#define CFG_CS2_CFG 0x0004D930
#endif
@@ -507,8 +485,7 @@
* Grafic controller - Do not map below 2 GB in address space, because this
* area is used for SDRAM autosizing.
*/
-#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
- defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
#define SM501_FB_BASE 0xE0000000
#define CFG_CS1_START (SM501_FB_BASE)
#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 18197f2..da6946b 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -177,6 +177,13 @@
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+/* PS/2 Keyboard */
+#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
+#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
+#define CONFIG_PS2SERIAL 2 /* .. on DUART2 */
+#define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */
+#define CONFIG_BOARD_EARLY_INIT_R 1
+
/* Use the HUSH parser */
#define CFG_HUSH_PARSER
#ifdef CFG_HUSH_PARSER
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index 46280f7..572a70f 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -108,7 +108,7 @@
/* still about 20 kB free with this defined */
#define CFG_LONGHELP
-#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTDELAY 1
#ifdef CONFIG_HARD_I2C
#define CONFIG_COMMANDS \
@@ -206,15 +206,6 @@
#error CONFIG_USE_IRQ not supported
#endif
-#define CFG_DEVICE_NULLDEV 1 /* enble null device */
-#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
-#define CONFIG_AUTOBOOT_STOP_STR "R" /* default password */
-
-#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
"addmtd;bootm\0" \
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
new file mode 100644
index 0000000..77d2d56
--- /dev/null
+++ b/include/configs/gth2.h
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2005
+ * Thomas.Lange@corelatus.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the gth2 board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
+#define CONFIG_GTH2 1
+#define CONFIG_AU1X00 1 /* alchemy series cpu */
+
+#define CONFIG_AU1000 1
+
+#define CONFIG_MISC_INIT_R 1
+
+#define CONFIG_ETHADDR DE:AD:BE:EF:01:02 /* Ethernet address */
+
+#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */
+
+#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */
+
+#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */
+
+#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */
+
+#define CONFIG_BAUDRATE 115200
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 115200 }
+
+/* Only interrupt boot if space is pressed */
+/* If a long serial cable is connected but */
+/* other end is dead, garbage will be read */
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#define CONFIG_BOOTARGS "panic=1"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "addmisc=setenv bootargs $(bootargs) " \
+ "ethaddr=$(ethaddr) \0" \
+ "netboot=bootp;run addmisc;bootm\0" \
+ ""
+
+/* Boot from Compact flash partition 2 as default */
+#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm"
+
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \
+ ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
+ CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \
+ CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT ))
+
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "GTH2 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args*/
+
+#define CFG_MALLOC_LEN 128*1024
+
+#define CFG_BOOTPARAMS_LEN 128*1024
+
+#define CFG_MHZ 500
+
+#define CFG_HZ (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */
+
+#define CFG_SDRAM_BASE 0x80000000 /* Cached addr */
+
+#define CFG_LOAD_ADDR 0x81000000 /* default load address */
+
+#define CFG_MEMTEST_START 0x80100000
+#define CFG_MEMTEST_END 0x83000000
+
+#define CONFIG_HW_WATCHDOG 1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
+
+#define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */
+
+/* The following #defines are needed to get flash environment right */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (192 << 10)
+
+#define CFG_INIT_SP_OFFSET 0x400000
+
+/* We boot from this flash, selected with dip switch */
+#define CFG_FLASH_BASE PHYS_FLASH
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_IS_NOWHERE 1
+
+/* Address and size of Primary Environment Sector */
+#define CFG_ENV_ADDR 0xB0030000
+#define CFG_ENV_SIZE 0x10000
+
+#define CONFIG_FLASH_16BIT
+
+#define CONFIG_NR_DRAM_BANKS 2
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_MEMSIZE_IN_BYTES
+
+/*---ATA PCMCIA ------------------------------------*/
+#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
+
+#define CFG_PCMCIA_MEM_ADDR 0x20000000
+#define CFG_PCMCIA_IO_BASE 0x28000000
+#define CFG_PCMCIA_ATTR_BASE 0x30000000
+
+#define CONFIG_PCMCIA_SLOT_A
+
+#define CONFIG_ATAPI 1
+#define CONFIG_MAC_PARTITION 1
+
+/* We run CF in "true ide" mode or a harddrive via pcmcia */
+#define CONFIG_IDE_PCMCIA 1
+
+/* We only support one slot for now */
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_RESET /* reset for ide not supported */
+
+#define CFG_ATA_IDE0_OFFSET 0
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_IO_BASE
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET 0
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET 0
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET 0x0200
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384
+#define CFG_ICACHE_SIZE 16384
+#define CFG_CACHELINE_SIZE 32
+
+#define GPIO_CACONFIG (1<<0)
+#define GPIO_DPACONFIG (1<<6)
+#define GPIO_ERESET (1<<11)
+#define GPIO_EEDQ (1<<17)
+#define GPIO_WDI (1<<18)
+#define GPIO_RJ1LY (1<<22)
+#define GPIO_RJ1LG (1<<23)
+#define GPIO_LEDCLK (1<<29)
+#define GPIO_LEDD (1<<30)
+#define GPIO_CPU_LED (1<<31)
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 96cb6e4..9ebb51e 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -191,16 +191,6 @@
#undef CONFIG_BOOTARGS
-#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX "-AA\0"
-#elif defined (CONFIG_TQM5200_AB)
-# define CONFIG_U_BOOT_SUFFIX "-AB\0"
-#elif defined (CONFIG_TQM5200_AC)
-# define CONFIG_U_BOOT_SUFFIX "-AC\0"
-#else
-# define CONFIG_U_BOOT_SUFFIX "\0"
-#endif
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
@@ -217,7 +207,7 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"bootfile=/tftpboot/tqm5200/uImage\0" \
"load=tftp 200000 ${u-boot}\0" \
- "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \
+ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
"update=protect off FC000000 FC05FFFF;" \
"erase FC000000 FC05FFFF;" \
"cp.b 200000 FC000000 ${filesize};" \
@@ -283,13 +273,6 @@
#endif
/* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
-#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
- CFG_I2C_SLAVE }
-#elif defined (CONFIG_TQM5200_AC)
-#define I2C_ADDR_LIST { CFG_I2C_SLAVE }
-#endif
-
#if defined (CONFIG_MINIFAP)
#undef I2C_ADDR_LIST
#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
@@ -478,13 +461,9 @@
* SRAM - Do not map below 2 GB in address space, because this area is used
* for SDRAM autosizing.
*/
-#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
#define CFG_CS2_START 0xE5000000
-#ifdef CONFIG_TQM5200_AB
-#define CFG_CS2_SIZE 0x80000 /* 512 kByte */
-#else /* CONFIG_CS_AUTOCONF */
#define CFG_CS2_SIZE 0x100000 /* 1 MByte */
-#endif
#define CFG_CS2_CFG 0x0004D930
#endif
@@ -492,8 +471,7 @@
* Grafic controller - Do not map below 2 GB in address space, because this
* area is used for SDRAM autosizing.
*/
-#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
- defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
#define SM501_FB_BASE 0xE0000000
#define CFG_CS1_START (SM501_FB_BASE)
#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 85ee756..8f71acf 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -160,7 +160,6 @@
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_FAT | \
- CFG_CMD_JFFS2 | \
CFG_CMD_NFS | \
CFG_CMD_SNTP | \
CFG_CMD_USB )
@@ -174,7 +173,6 @@
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_FAT | \
- CFG_CMD_JFFS2 | \
CFG_CMD_NFS | \
CFG_CMD_SNTP | \
CFG_CMD_USB )
@@ -384,10 +382,10 @@
#define MTDIDS_DEFAULT "nor0=0"
/* production flash layout */
-#define MTDPARTS_DEFAULT "mtdparts=0:32k(Firmware1)ro," \
+#define MTDPARTS_DEFAULT "mtdparts=0:16k(Firmware1)ro," \
"16k(Env1)," \
"16k(Env2)," \
- "320k(Firmware2)ro," \
+ "336k(Firmware2)ro," \
"896k(Kernel)," \
"5376k(Root-FS)," \
"1408k(JFFS2)," \
diff --git a/include/serial.h b/include/serial.h
index c8abb72..8c7b1c2 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -23,7 +23,7 @@
extern struct serial_device * default_serial_console (void);
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
- || defined(CONFIG_405EP)
+ || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
#endif