acpi: x86: Move SPCR and DBG2 into common code
This moves the SPCR and DBG2 table generation into common code, so that
they can be used by architectures other than x86.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/include/asm/acpi_table.h b/arch/x86/include/asm/acpi_table.h
index 57e4165..e617524 100644
--- a/arch/x86/include/asm/acpi_table.h
+++ b/arch/x86/include/asm/acpi_table.h
@@ -46,17 +46,6 @@
int acpi_write_hpet(struct acpi_ctx *ctx);
/**
- * acpi_write_dbg2_pci_uart() - Write out a DBG2 table
- *
- * @ctx: Current ACPI context
- * @dev: Debug UART device to describe
- * @access_size: Access size for UART (e.g. ACPI_ACCESS_SIZE_DWORD_ACCESS)
- * Return: 0 if OK, -ve on error
- */
-int acpi_write_dbg2_pci_uart(struct acpi_ctx *ctx, struct udevice *dev,
- uint access_size);
-
-/**
* acpi_create_gnvs() - Create a GNVS (Global Non Volatile Storage) table
*
* @gnvs: Table to fill in
diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c
index e38ce19..08fd1e5 100644
--- a/arch/x86/lib/acpi_table.c
+++ b/arch/x86/lib/acpi_table.c
@@ -279,140 +279,6 @@
}
ACPI_WRITER(5tpm2, "TPM2", acpi_write_tpm2, 0);
-int acpi_write_spcr(struct acpi_ctx *ctx, const struct acpi_writer *entry)
-{
- struct serial_device_info serial_info = {0};
- ulong serial_address, serial_offset;
- struct acpi_table_header *header;
- struct acpi_spcr *spcr;
- struct udevice *dev;
- uint serial_config;
- uint serial_width;
- int access_size;
- int space_id;
- int ret = -ENODEV;
-
- spcr = ctx->current;
- header = &spcr->header;
-
- memset(spcr, '\0', sizeof(struct acpi_spcr));
-
- /* Fill out header fields */
- acpi_fill_header(header, "SPCR");
- header->length = sizeof(struct acpi_spcr);
- header->revision = 2;
-
- /* Read the device once, here. It is reused below */
- dev = gd->cur_serial_dev;
- if (dev)
- ret = serial_getinfo(dev, &serial_info);
- if (ret)
- serial_info.type = SERIAL_CHIP_UNKNOWN;
-
- /* Encode chip type */
- switch (serial_info.type) {
- case SERIAL_CHIP_16550_COMPATIBLE:
- spcr->interface_type = ACPI_DBG2_16550_COMPATIBLE;
- break;
- case SERIAL_CHIP_UNKNOWN:
- default:
- spcr->interface_type = ACPI_DBG2_UNKNOWN;
- break;
- }
-
- /* Encode address space */
- switch (serial_info.addr_space) {
- case SERIAL_ADDRESS_SPACE_MEMORY:
- space_id = ACPI_ADDRESS_SPACE_MEMORY;
- break;
- case SERIAL_ADDRESS_SPACE_IO:
- default:
- space_id = ACPI_ADDRESS_SPACE_IO;
- break;
- }
-
- serial_width = serial_info.reg_width * 8;
- serial_offset = serial_info.reg_offset << serial_info.reg_shift;
- serial_address = serial_info.addr + serial_offset;
-
- /* Encode register access size */
- switch (serial_info.reg_shift) {
- case 0:
- access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
- break;
- case 1:
- access_size = ACPI_ACCESS_SIZE_WORD_ACCESS;
- break;
- case 2:
- access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
- break;
- case 3:
- access_size = ACPI_ACCESS_SIZE_QWORD_ACCESS;
- break;
- default:
- access_size = ACPI_ACCESS_SIZE_UNDEFINED;
- break;
- }
-
- debug("UART type %u @ %lx\n", spcr->interface_type, serial_address);
-
- /* Fill GAS */
- spcr->serial_port.space_id = space_id;
- spcr->serial_port.bit_width = serial_width;
- spcr->serial_port.bit_offset = 0;
- spcr->serial_port.access_size = access_size;
- spcr->serial_port.addrl = lower_32_bits(serial_address);
- spcr->serial_port.addrh = upper_32_bits(serial_address);
-
- /* Encode baud rate */
- switch (serial_info.baudrate) {
- case 9600:
- spcr->baud_rate = 3;
- break;
- case 19200:
- spcr->baud_rate = 4;
- break;
- case 57600:
- spcr->baud_rate = 6;
- break;
- case 115200:
- spcr->baud_rate = 7;
- break;
- default:
- spcr->baud_rate = 0;
- break;
- }
-
- serial_config = SERIAL_DEFAULT_CONFIG;
- if (dev)
- ret = serial_getconfig(dev, &serial_config);
-
- spcr->parity = SERIAL_GET_PARITY(serial_config);
- spcr->stop_bits = SERIAL_GET_STOP(serial_config);
-
- /* No PCI devices for now */
- spcr->pci_device_id = 0xffff;
- spcr->pci_vendor_id = 0xffff;
-
- /*
- * SPCR has no clue if the UART base clock speed is different
- * to the default one. However, the SPCR 1.04 defines baud rate
- * 0 as a preconfigured state of UART and OS is supposed not
- * to touch the configuration of the serial device.
- */
- if (serial_info.clock != SERIAL_DEFAULT_CLOCK)
- spcr->baud_rate = 0;
-
- /* Fix checksum */
- header->checksum = table_compute_checksum((void *)spcr, header->length);
-
- acpi_add_table(ctx, spcr);
- acpi_inc(ctx, spcr->header.length);
-
- return 0;
-}
-ACPI_WRITER(5spcr, "SPCR", acpi_write_spcr, 0);
-
int acpi_write_gnvs(struct acpi_ctx *ctx, const struct acpi_writer *entry)
{
ulong addr;
@@ -515,46 +381,6 @@
return 0;
}
-int acpi_write_dbg2_pci_uart(struct acpi_ctx *ctx, struct udevice *dev,
- uint access_size)
-{
- struct acpi_dbg2_header *dbg2 = ctx->current;
- char path[ACPI_PATH_MAX];
- struct acpi_gen_regaddr address;
- phys_addr_t addr;
- int ret;
-
- if (!device_active(dev)) {
- log_info("Device not enabled\n");
- return -EACCES;
- }
- /*
- * PCI devices don't remember their resource allocation information in
- * U-Boot at present. We assume that MMIO is used for the UART and that
- * the address space is 32 bytes: ns16550 uses 8 registers of up to
- * 32-bits each. This is only for debugging so it is not a big deal.
- */
- addr = dm_pci_read_bar32(dev, 0);
- log_debug("UART addr %lx\n", (ulong)addr);
-
- memset(&address, '\0', sizeof(address));
- address.space_id = ACPI_ADDRESS_SPACE_MEMORY;
- address.addrl = (uint32_t)addr;
- address.addrh = (uint32_t)((addr >> 32) & 0xffffffff);
- address.access_size = access_size;
-
- ret = acpi_device_path(dev, path, sizeof(path));
- if (ret)
- return log_msg_ret("path", ret);
- acpi_create_dbg2(dbg2, ACPI_DBG2_SERIAL_PORT,
- ACPI_DBG2_16550_COMPATIBLE, &address, 0x1000, path);
-
- acpi_inc_align(ctx, dbg2->header.length);
- acpi_add_table(ctx, dbg2);
-
- return 0;
-}
-
void acpi_fadt_common(struct acpi_fadt *fadt, struct acpi_facs *facs,
void *dsdt)
{
diff --git a/include/acpi/acpi_table.h b/include/acpi/acpi_table.h
index 15fd61a..a372435 100644
--- a/include/acpi/acpi_table.h
+++ b/include/acpi/acpi_table.h
@@ -914,6 +914,17 @@
}
/**
+ * acpi_write_dbg2_pci_uart() - Write out a DBG2 table
+ *
+ * @ctx: Current ACPI context
+ * @dev: Debug UART device to describe
+ * @access_size: Access size for UART (e.g. ACPI_ACCESS_SIZE_DWORD_ACCESS)
+ * Return: 0 if OK, -ve on error
+ */
+int acpi_write_dbg2_pci_uart(struct acpi_ctx *ctx, struct udevice *dev,
+ uint access_size);
+
+/**
* acpi_write_rsdp() - Write out an RSDP indicating where the ACPI tables are
*
* @rsdp: Address to write RSDP
diff --git a/lib/acpi/acpi_table.c b/lib/acpi/acpi_table.c
index 6dbfdb2..c9ddcca 100644
--- a/lib/acpi/acpi_table.c
+++ b/lib/acpi/acpi_table.c
@@ -10,8 +10,10 @@
#include <log.h>
#include <mapmem.h>
#include <tables_csum.h>
+#include <serial.h>
#include <version_string.h>
#include <acpi/acpi_table.h>
+#include <acpi/acpi_device.h>
#include <asm/global_data.h>
#include <dm/acpi.h>
@@ -262,3 +264,185 @@
header->length = current - (uintptr_t)dbg2;
header->checksum = table_compute_checksum(dbg2, header->length);
}
+
+int acpi_write_dbg2_pci_uart(struct acpi_ctx *ctx, struct udevice *dev,
+ uint access_size)
+{
+ struct acpi_dbg2_header *dbg2 = ctx->current;
+ char path[ACPI_PATH_MAX];
+ struct acpi_gen_regaddr address;
+ u64 addr;
+ int ret;
+
+ if (!device_active(dev)) {
+ log_info("Device not enabled\n");
+ return -EACCES;
+ }
+ /*
+ * PCI devices don't remember their resource allocation information in
+ * U-Boot at present. We assume that MMIO is used for the UART and that
+ * the address space is 32 bytes: ns16550 uses 8 registers of up to
+ * 32-bits each. This is only for debugging so it is not a big deal.
+ */
+ addr = dm_pci_read_bar32(dev, 0);
+ log_debug("UART addr %lx\n", (ulong)addr);
+
+ ret = acpi_device_path(dev, path, sizeof(path));
+ if (ret)
+ return log_msg_ret("path", ret);
+
+ memset(&address, '\0', sizeof(address));
+ address.space_id = ACPI_ADDRESS_SPACE_MEMORY;
+ address.addrl = (uint32_t)addr;
+ address.addrh = (uint32_t)((addr >> 32) & 0xffffffff);
+ address.access_size = access_size;
+
+ ret = acpi_device_path(dev, path, sizeof(path));
+ if (ret)
+ return log_msg_ret("path", ret);
+ acpi_create_dbg2(dbg2, ACPI_DBG2_SERIAL_PORT,
+ ACPI_DBG2_16550_COMPATIBLE, &address, 0x1000, path);
+
+ acpi_inc_align(ctx, dbg2->header.length);
+ acpi_add_table(ctx, dbg2);
+
+ return 0;
+}
+
+static int acpi_write_spcr(struct acpi_ctx *ctx, const struct acpi_writer *entry)
+{
+ struct serial_device_info serial_info = {0};
+ ulong serial_address, serial_offset;
+ struct acpi_table_header *header;
+ struct acpi_spcr *spcr;
+ struct udevice *dev;
+ uint serial_config;
+ uint serial_width;
+ int access_size;
+ int space_id;
+ int ret = -ENODEV;
+
+ spcr = ctx->current;
+ header = &spcr->header;
+
+ memset(spcr, '\0', sizeof(struct acpi_spcr));
+
+ /* Fill out header fields */
+ acpi_fill_header(header, "SPCR");
+ header->length = sizeof(struct acpi_spcr);
+ header->revision = 2;
+
+ /* Read the device once, here. It is reused below */
+ dev = gd->cur_serial_dev;
+ if (dev)
+ ret = serial_getinfo(dev, &serial_info);
+ if (ret)
+ serial_info.type = SERIAL_CHIP_UNKNOWN;
+
+ /* Encode chip type */
+ switch (serial_info.type) {
+ case SERIAL_CHIP_16550_COMPATIBLE:
+ spcr->interface_type = ACPI_DBG2_16550_COMPATIBLE;
+ break;
+ case SERIAL_CHIP_PL01X:
+ spcr->interface_type = ACPI_DBG2_ARM_PL011;
+ break;
+ case SERIAL_CHIP_UNKNOWN:
+ default:
+ spcr->interface_type = ACPI_DBG2_UNKNOWN;
+ break;
+ }
+
+ /* Encode address space */
+ switch (serial_info.addr_space) {
+ case SERIAL_ADDRESS_SPACE_MEMORY:
+ space_id = ACPI_ADDRESS_SPACE_MEMORY;
+ break;
+ case SERIAL_ADDRESS_SPACE_IO:
+ default:
+ space_id = ACPI_ADDRESS_SPACE_IO;
+ break;
+ }
+
+ serial_width = serial_info.reg_width * 8;
+ serial_offset = serial_info.reg_offset << serial_info.reg_shift;
+ serial_address = serial_info.addr + serial_offset;
+
+ /* Encode register access size */
+ switch (serial_info.reg_shift) {
+ case 0:
+ access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
+ break;
+ case 1:
+ access_size = ACPI_ACCESS_SIZE_WORD_ACCESS;
+ break;
+ case 2:
+ access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+ break;
+ case 3:
+ access_size = ACPI_ACCESS_SIZE_QWORD_ACCESS;
+ break;
+ default:
+ access_size = ACPI_ACCESS_SIZE_UNDEFINED;
+ break;
+ }
+
+ debug("UART type %u @ %lx\n", spcr->interface_type, serial_address);
+
+ /* Fill GAS */
+ spcr->serial_port.space_id = space_id;
+ spcr->serial_port.bit_width = serial_width;
+ spcr->serial_port.bit_offset = 0;
+ spcr->serial_port.access_size = access_size;
+ spcr->serial_port.addrl = lower_32_bits(serial_address);
+ spcr->serial_port.addrh = upper_32_bits(serial_address);
+
+ /* Encode baud rate */
+ switch (serial_info.baudrate) {
+ case 9600:
+ spcr->baud_rate = 3;
+ break;
+ case 19200:
+ spcr->baud_rate = 4;
+ break;
+ case 57600:
+ spcr->baud_rate = 6;
+ break;
+ case 115200:
+ spcr->baud_rate = 7;
+ break;
+ default:
+ spcr->baud_rate = 0;
+ break;
+ }
+
+ serial_config = SERIAL_DEFAULT_CONFIG;
+ if (dev)
+ ret = serial_getconfig(dev, &serial_config);
+
+ spcr->parity = SERIAL_GET_PARITY(serial_config);
+ spcr->stop_bits = SERIAL_GET_STOP(serial_config);
+
+ /* No PCI devices for now */
+ spcr->pci_device_id = 0xffff;
+ spcr->pci_vendor_id = 0xffff;
+
+ /*
+ * SPCR has no clue if the UART base clock speed is different
+ * to the default one. However, the SPCR 1.04 defines baud rate
+ * 0 as a preconfigured state of UART and OS is supposed not
+ * to touch the configuration of the serial device.
+ */
+ if (serial_info.clock != SERIAL_DEFAULT_CLOCK)
+ spcr->baud_rate = 0;
+
+ /* Fix checksum */
+ header->checksum = table_compute_checksum((void *)spcr, header->length);
+
+ acpi_add_table(ctx, spcr);
+ acpi_inc(ctx, spcr->header.length);
+
+ return 0;
+}
+
+ACPI_WRITER(5spcr, "SPCR", acpi_write_spcr, 0);