diff --git a/doc/README.dfu b/doc/README.dfu
index be53b5b..6cb1cba 100644
--- a/doc/README.dfu
+++ b/doc/README.dfu
@@ -17,7 +17,7 @@
   - The access to mediums is done in DFU backends (driver/dfu)
 
   Today the supported DFU backends are:
-  - MMC (RAW or FAT / EXT2 / EXT3 / EXT4 file system)
+  - MMC (RAW or FAT / EXT2 / EXT3 / EXT4 file system / SKIP)
   - NAND
   - RAM
   - SF (serial flash)
@@ -91,6 +91,7 @@
       <name> part <dev> <part_id> [mmcpart <num>]  raw access to partition
       <name> fat <dev> <part_id> [mmcpart <num>]   file in FAT partition
       <name> ext4 <dev> <part_id> [mmcpart <num>]  file in EXT4 partition
+      <name> skip 0 0                              ignore flashed data
 
       with <partid> being the GPT or DOS partition index,
       with <num> being the eMMC hardware partition number.
@@ -103,6 +104,18 @@
 
       "u-boot raw 0x80 0x800;uImage ext4 0 2"
 
+    If don't want to flash given image file to storage, use "skip" type
+    entity.
+    - It can be used to protect flashing wrong image for the specific board.
+    - Especailly, this layout will be useful when thor protocol is used,
+      which performs flashing in batch mode, where more than one file is
+      processed.
+    For example, if one makes a single tar file with support for the two
+    boards with u-boot-<board1>.bin and u-boot-<board2>.bin files, one
+    can use it to flash a proper u-boot image on both without a failure:
+
+      "u-boot-<board1>.bin raw 0x80 0x800; u-boot-<board2>.bin skip 0 0"
+
   "nand" (raw slc nand device)
     cmd: dfu 0 nand <dev>
     each element in "dfu_alt_info" =
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 501a60b..fc32a53 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -614,7 +614,7 @@
 const char *dfu_get_layout(enum dfu_layout l)
 {
 	const char *const dfu_layout[] = {NULL, "RAW_ADDR", "FAT", "EXT2",
-					  "EXT3", "EXT4", "RAM_ADDR" };
+					  "EXT3", "EXT4", "RAM_ADDR", "SKIP" };
 	return dfu_layout[l];
 }
 
diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
index 784d0ec..d1af11d 100644
--- a/drivers/dfu/dfu_mmc.c
+++ b/drivers/dfu/dfu_mmc.c
@@ -108,6 +108,8 @@
 	case DFU_FS_EXT4:
 		fstype = FS_TYPE_EXT;
 		break;
+	case DFU_SKIP:
+		return 0;
 	default:
 		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
 		       dfu_get_layout(dfu->layout));
@@ -204,6 +206,9 @@
 	case DFU_FS_EXT4:
 		ret = mmc_file_buf_write(dfu, offset, buf, len);
 		break;
+	case DFU_SKIP:
+		ret = 0;
+		break;
 	default:
 		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
 		       dfu_get_layout(dfu->layout));
@@ -238,6 +243,8 @@
 		if (ret < 0)
 			return ret;
 		return 0;
+	case DFU_SKIP:
+		return 0;
 	default:
 		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
 		       dfu_get_layout(dfu->layout));
@@ -399,6 +406,8 @@
 		dfu->layout = DFU_FS_FAT;
 	} else if (!strcmp(entity_type, "ext4")) {
 		dfu->layout = DFU_FS_EXT4;
+	} else if (!strcmp(entity_type, "skip")) {
+		dfu->layout = DFU_SKIP;
 	} else {
 		pr_err("Memory layout (%s) not supported!\n", entity_type);
 		return -ENODEV;
diff --git a/include/dfu.h b/include/dfu.h
index a767ade..0b1dae0 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -33,6 +33,7 @@
 	DFU_FS_EXT3,
 	DFU_FS_EXT4,
 	DFU_RAM_ADDR,
+	DFU_SKIP,
 };
 
 enum dfu_op {