powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target
Get rid of the SRIOBOOT_MASTER build target, and to support for serving as
a SRIO boot master via environment variable. Set the environment variable
"bootmaster" to "SRIO1" or "SRIO2" using the following command:
setenv bootmaster SRIO1
saveenv
The "bootmaster" will enable the function of the SRIO boot master, and
this has the following advantages compared with SRIOBOOT_MASTER build
configuration:
1. Reduce a build configuration item in boards.cfg file.
No longer need to build a special image for master, just use a
normal target image and set the "bootmaster" variable.
2. No longer need to rebuild an image when change the SRIO port for
boot from SRIO, just set the corresponding value to "bootmaster"
based on the using SRIO port.
Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 74863b4..f293265 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -480,11 +480,18 @@
#ifdef CONFIG_SYS_SRIO
srio_init();
-#ifdef CONFIG_SRIOBOOT_MASTER
- srio_boot_master();
-#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
- srio_boot_master_release_slave();
-#endif
+#ifdef CONFIG_FSL_CORENET
+ char *s = getenv("bootmaster");
+ if (s) {
+ if (!strcmp(s, "SRIO1")) {
+ srio_boot_master(1);
+ srio_boot_master_release_slave(1);
+ }
+ if (!strcmp(s, "SRIO2")) {
+ srio_boot_master(2);
+ srio_boot_master_release_slave(2);
+ }
+ }
#endif
#endif