usb: ohci: Do not reuse ed for interrupt endpoints of different devices
When submitting interrupt packets to an endpoint we only link in the ed
once to avoid some races surrounding unlinking of periodic endpoints,
but we share one ohci_device struct / one set of ed-s for all devices,
which means that if we have an interrupt endpoint at endpoint 1 with one
device, and a non interrupt endpoint 1 with another device we end up
with the same ed linked into both the periodic and async lists, which is
not good (tm).
This commit switches over to using separate ohci_device structs, and thus
separate ed-s for devices with interrupt endpoints, fixing this.
This fixes e.g. matching a usb storage device and keyboard on the same
usb-1 hub not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 2f976d2..5364ced 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1478,6 +1478,31 @@
/*-------------------------------------------------------------------------*/
+static ohci_dev_t *ohci_get_ohci_dev(ohci_t *ohci, int devnum, int intr)
+{
+ int i;
+
+ if (!intr)
+ return &ohci->ohci_dev;
+
+ /* First see if we already have an ohci_dev for this dev. */
+ for (i = 0; i < NUM_INT_DEVS; i++) {
+ if (ohci->int_dev[i].devnum == devnum)
+ return &ohci->int_dev[i];
+ }
+
+ /* If not then find a free one. */
+ for (i = 0; i < NUM_INT_DEVS; i++) {
+ if (ohci->int_dev[i].devnum == -1) {
+ ohci->int_dev[i].devnum = devnum;
+ return &ohci->int_dev[i];
+ }
+ }
+
+ printf("ohci: Error out of ohci_devs for interrupt endpoints\n");
+ return NULL;
+}
+
/* common code for handling submit messages - used for all but root hub */
/* accesses. */
static int submit_common_msg(ohci_t *ohci, struct usb_device *dev,
@@ -1488,6 +1513,7 @@
int maxsize = usb_maxpacket(dev, pipe);
int timeout;
urb_priv_t *urb;
+ ohci_dev_t *ohci_dev;
urb = malloc(sizeof(urb_priv_t));
memset(urb, 0, sizeof(urb_priv_t));
@@ -1511,7 +1537,11 @@
return -1;
}
- if (sohci_submit_job(ohci, &ohci->ohci_dev, urb, setup) < 0) {
+ ohci_dev = ohci_get_ohci_dev(ohci, dev->devnum, usb_pipeint(pipe));
+ if (!ohci_dev)
+ return -ENOMEM;
+
+ if (sohci_submit_job(ohci, ohci_dev, urb, setup) < 0) {
err("sohci_submit_job failed");
return -1;
}
@@ -1711,8 +1741,11 @@
{
__u32 mask;
unsigned int fminterval;
+ int i;
ohci->disabled = 1;
+ for (i = 0; i < NUM_INT_DEVS; i++)
+ ohci->int_dev[i].devnum = -1;
/* Tell the controller where the control and bulk lists are
* The lists are empty now. */