Use common function to set GPIOs for MX3 and MX5
The patch adds support for setting gpios to the
MX51 processor and change name to the corresponding
functions for MX31. In this way, it is possible to get rid
of nasty #ifdef switches related to the processor type.
Signed-off-by: Stefano Babic <sbabic@denx.de>
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index e15a63c..802cd2e 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -23,6 +23,7 @@
#include <spi.h>
#include <asm/errno.h>
#include <asm/io.h>
+#include <mxc_gpio.h>
#ifdef CONFIG_MX27
/* i.MX27 has a completely wrong register layout and register definitions in the
@@ -68,9 +69,6 @@
0x53f84000,
};
-#define OUT MX31_GPIO_DIRECTION_OUT
-#define mxc_gpio_direction mx31_gpio_direction
-#define mxc_gpio_set mx31_gpio_set
#elif defined(CONFIG_MX51)
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
@@ -111,13 +109,12 @@
CSPI2_BASE_ADDR,
CSPI3_BASE_ADDR,
};
-#define mxc_gpio_direction(gpio, dir) (0)
-#define mxc_gpio_set(gpio, value) {}
-#define OUT 1
#else
#error "Unsupported architecture"
#endif
+#define OUT MXC_GPIO_DIRECTION_OUT
+
struct mxc_spi_slave {
struct spi_slave slave;
unsigned long base;
@@ -126,6 +123,7 @@
u32 cfg_reg;
#endif
int gpio;
+ int ss_pol;
};
static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
@@ -147,7 +145,7 @@
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
if (mxcs->gpio > 0)
- mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
+ mxc_gpio_set(mxcs->gpio, mxcs->ss_pol);
}
void spi_cs_deactivate(struct spi_slave *slave)
@@ -155,7 +153,7 @@
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
if (mxcs->gpio > 0)
mxc_gpio_set(mxcs->gpio,
- !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
+ !(mxcs->ss_pol));
}
#ifdef CONFIG_MX51
@@ -394,6 +392,7 @@
mxcs->slave.bus = bus;
mxcs->slave.cs = cs;
mxcs->base = spi_bases[bus];
+ mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
#ifdef CONFIG_MX51
/* Can be used for i.MX31 too ? */