| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * efi_selftest_load_file |
| * |
| * Copyright (c) 2020 Heinrich Schuchardt <xypron.glpk@gmx.de> |
| * |
| * This test checks the handling of the LOAD_FILE and the LOAD_FILE2 protocol |
| * by the LoadImage() service. |
| */ |
| |
| #include <efi_selftest.h> |
| /* Include containing the miniapp.efi application */ |
| #include "efi_miniapp_file_image_exit.h" |
| |
| /* Block size of compressed disk image */ |
| #define COMPRESSED_DISK_IMAGE_BLOCK_SIZE 8 |
| |
| /* Binary logarithm of the block size */ |
| #define LB_BLOCK_SIZE 9 |
| |
| #define GUID_VENDOR \ |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, \ |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0xfc, 0xbb, 0xd1) |
| |
| #define GUID_VENDOR2 \ |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, \ |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0xfc, 0xbb, 0xd2) |
| |
| #define FILE_NAME_SIZE 16 |
| |
| static const efi_guid_t efi_st_guid_load_file_protocol = |
| EFI_LOAD_FILE_PROTOCOL_GUID; |
| static const efi_guid_t efi_st_guid_load_file2_protocol = |
| EFI_LOAD_FILE2_PROTOCOL_GUID; |
| static const efi_guid_t efi_st_guid_device_path = |
| EFI_DEVICE_PATH_PROTOCOL_GUID; |
| |
| static efi_handle_t image_handle; |
| static struct efi_boot_services *boottime; |
| static efi_handle_t handle_lf; |
| static efi_handle_t handle_lf2; |
| |
| /* One 8 byte block of the compressed disk image */ |
| struct line { |
| size_t addr; |
| char *line; |
| }; |
| |
| /* Compressed file image */ |
| struct compressed_file_image { |
| size_t length; |
| struct line lines[]; |
| }; |
| |
| static struct compressed_file_image img = EFI_ST_DISK_IMG; |
| |
| static int load_file_call_count; |
| static int load_file2_call_count; |
| |
| /* Decompressed file image */ |
| static u8 *image; |
| |
| static struct { |
| struct efi_device_path_vendor v; |
| struct efi_device_path d; |
| } dp_lf_prot = { |
| { |
| { |
| DEVICE_PATH_TYPE_HARDWARE_DEVICE, |
| DEVICE_PATH_SUB_TYPE_VENDOR, |
| sizeof(struct efi_device_path_vendor), |
| }, |
| GUID_VENDOR, |
| }, |
| { |
| DEVICE_PATH_TYPE_END, |
| DEVICE_PATH_SUB_TYPE_END, |
| sizeof(struct efi_device_path), |
| }, |
| }; |
| |
| static struct { |
| struct efi_device_path_vendor v; |
| struct efi_device_path_file_path f; |
| u16 file_name[FILE_NAME_SIZE]; |
| struct efi_device_path e; |
| } dp_lf_file = { |
| { |
| { |
| DEVICE_PATH_TYPE_HARDWARE_DEVICE, |
| DEVICE_PATH_SUB_TYPE_VENDOR, |
| sizeof(struct efi_device_path_vendor), |
| }, |
| GUID_VENDOR, |
| }, |
| { |
| { |
| DEVICE_PATH_TYPE_MEDIA_DEVICE, |
| DEVICE_PATH_SUB_TYPE_FILE_PATH, |
| sizeof(struct efi_device_path_file_path) + |
| FILE_NAME_SIZE * sizeof(u16), |
| } |
| }, |
| L"\\lf.efi", |
| { |
| DEVICE_PATH_TYPE_END, |
| DEVICE_PATH_SUB_TYPE_END, |
| sizeof(struct efi_device_path), |
| }, |
| }; |
| |
| struct efi_device_path *dp_lf_file_remainder = &dp_lf_file.f.dp; |
| |
| static struct { |
| struct efi_device_path_vendor v; |
| struct efi_device_path d; |
| } dp_lf2_prot = { |
| { |
| { |
| DEVICE_PATH_TYPE_HARDWARE_DEVICE, |
| DEVICE_PATH_SUB_TYPE_VENDOR, |
| sizeof(struct efi_device_path_vendor), |
| }, |
| GUID_VENDOR2, |
| }, |
| { |
| DEVICE_PATH_TYPE_END, |
| DEVICE_PATH_SUB_TYPE_END, |
| sizeof(struct efi_device_path), |
| }, |
| }; |
| |
| static struct { |
| struct efi_device_path_vendor v; |
| struct efi_device_path_file_path f; |
| u16 file_name[FILE_NAME_SIZE]; |
| struct efi_device_path e; |
| } dp_lf2_file = { |
| { |
| { |
| DEVICE_PATH_TYPE_HARDWARE_DEVICE, |
| DEVICE_PATH_SUB_TYPE_VENDOR, |
| sizeof(struct efi_device_path_vendor), |
| }, |
| GUID_VENDOR2, |
| }, |
| { |
| { |
| DEVICE_PATH_TYPE_MEDIA_DEVICE, |
| DEVICE_PATH_SUB_TYPE_FILE_PATH, |
| sizeof(struct efi_device_path_file_path) + |
| FILE_NAME_SIZE * sizeof(u16), |
| } |
| }, |
| L"\\lf2.efi", |
| { |
| DEVICE_PATH_TYPE_END, |
| DEVICE_PATH_SUB_TYPE_END, |
| sizeof(struct efi_device_path), |
| }, |
| }; |
| |
| struct efi_device_path *dp_lf2_file_remainder = &dp_lf2_file.f.dp; |
| |
| /* |
| * Decompress the disk image. |
| * |
| * @image decompressed disk image |
| * @return status code |
| */ |
| static efi_status_t decompress(u8 **image) |
| { |
| u8 *buf; |
| size_t i; |
| size_t addr; |
| size_t len; |
| efi_status_t ret; |
| |
| ret = boottime->allocate_pool(EFI_LOADER_DATA, img.length, |
| (void **)&buf); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Out of memory\n"); |
| return ret; |
| } |
| boottime->set_mem(buf, img.length, 0); |
| |
| for (i = 0; ; ++i) { |
| if (!img.lines[i].line) |
| break; |
| addr = img.lines[i].addr; |
| len = COMPRESSED_DISK_IMAGE_BLOCK_SIZE; |
| if (addr + len > img.length) |
| len = img.length - addr; |
| boottime->copy_mem(buf + addr, img.lines[i].line, len); |
| } |
| *image = buf; |
| return ret; |
| } |
| |
| /* |
| * load_file() - LoadFile() service of a EFI_LOAD_FILE_PROTOCOL |
| * |
| * @this: instance of EFI_LOAD_FILE_PROTOCOL |
| * @file_path: remaining device path |
| * @boot_policy: true if called by boot manager |
| * @buffer_size: (required) buffer size |
| * @buffer: buffer to which the file is to be loaded |
| */ |
| efi_status_t EFIAPI load_file(struct efi_load_file_protocol *this, |
| struct efi_device_path *file_path, |
| bool boot_policy, |
| efi_uintn_t *buffer_size, |
| void *buffer) |
| { |
| ++load_file_call_count; |
| if (memcmp(file_path, dp_lf_file_remainder, |
| sizeof(struct efi_device_path_file_path) + |
| FILE_NAME_SIZE * sizeof(u16) + |
| sizeof(struct efi_device_path))) { |
| efi_st_error("Wrong remaining device path\n"); |
| return EFI_NOT_FOUND; |
| } |
| if (this->load_file != load_file) { |
| efi_st_error("wrong this\n"); |
| return EFI_INVALID_PARAMETER; |
| } |
| if (*buffer_size < img.length) { |
| *buffer_size = img.length; |
| return EFI_BUFFER_TOO_SMALL; |
| } |
| memcpy(buffer, image, img.length); |
| *buffer_size = img.length; |
| return EFI_SUCCESS; |
| } |
| |
| |
| /* |
| * load_file2() - LoadFile() service of a EFI_LOAD_FILE2_PROTOCOL |
| * |
| * @this: instance of EFI_LOAD_FILE2_PROTOCOL |
| * @file_path: remaining device path |
| * @boot_policy: true if called by boot manager |
| * @buffer_size: (required) buffer size |
| * @buffer: buffer to which the file is to be loaded |
| */ |
| efi_status_t EFIAPI load_file2(struct efi_load_file_protocol *this, |
| struct efi_device_path *file_path, |
| bool boot_policy, |
| efi_uintn_t *buffer_size, |
| void *buffer) |
| { |
| ++load_file2_call_count; |
| if (memcmp(file_path, dp_lf2_file_remainder, |
| sizeof(struct efi_device_path_file_path) + |
| FILE_NAME_SIZE * sizeof(u16) + |
| sizeof(struct efi_device_path))) { |
| efi_st_error("Wrong remaining device path\n"); |
| return EFI_NOT_FOUND; |
| } |
| if (this->load_file != load_file2) { |
| efi_st_error("wrong this\n"); |
| return EFI_INVALID_PARAMETER; |
| } |
| if (boot_policy) { |
| efi_st_error("LOAD_FILE2 called with boot_policy = true"); |
| return EFI_INVALID_PARAMETER; |
| } |
| if (*buffer_size < img.length) { |
| *buffer_size = img.length; |
| return EFI_BUFFER_TOO_SMALL; |
| } |
| memcpy(buffer, image, img.length); |
| *buffer_size = img.length; |
| return EFI_SUCCESS; |
| } |
| |
| static struct efi_load_file_protocol lf_prot = {load_file}; |
| static struct efi_load_file_protocol lf2_prot = {load_file2}; |
| |
| /* |
| * Setup unit test. |
| * |
| * Install an EFI_LOAD_FILE_PROTOCOL and an EFI_LOAD_FILE2_PROTOCOL. |
| * |
| * @handle: handle of the loaded image |
| * @systable: system table |
| * @return: EFI_ST_SUCCESS for success |
| */ |
| static int efi_st_load_file_setup(const efi_handle_t handle, |
| const struct efi_system_table *systable) |
| { |
| efi_status_t ret; |
| |
| image_handle = handle; |
| boottime = systable->boottime; |
| |
| /* Load the application image into memory */ |
| decompress(&image); |
| |
| ret = boottime->install_multiple_protocol_interfaces( |
| &handle_lf, |
| &efi_st_guid_device_path, |
| &dp_lf_prot, |
| &efi_st_guid_load_file_protocol, |
| &lf_prot, |
| NULL); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("InstallMultipleProtocolInterfaces failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->install_multiple_protocol_interfaces( |
| &handle_lf2, |
| &efi_st_guid_device_path, |
| &dp_lf2_prot, |
| &efi_st_guid_load_file2_protocol, |
| &lf2_prot, |
| NULL); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("InstallMultipleProtocolInterfaces failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| return EFI_ST_SUCCESS; |
| } |
| |
| /* |
| * Tear down unit test. |
| * |
| * @return: EFI_ST_SUCCESS for success |
| */ |
| static int efi_st_load_file_teardown(void) |
| { |
| efi_status_t ret = EFI_ST_SUCCESS; |
| |
| if (handle_lf) { |
| ret = boottime->uninstall_multiple_protocol_interfaces( |
| handle_lf, |
| &efi_st_guid_device_path, |
| &dp_lf_prot, |
| &efi_st_guid_load_file_protocol, |
| &lf_prot, |
| NULL); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error( |
| "UninstallMultipleProtocolInterfaces failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| } |
| if (handle_lf2) { |
| ret = boottime->uninstall_multiple_protocol_interfaces( |
| handle_lf2, |
| &efi_st_guid_device_path, |
| &dp_lf2_prot, |
| &efi_st_guid_load_file2_protocol, |
| &lf2_prot, |
| NULL); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error( |
| "UninstallMultipleProtocolInterfaces failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| } |
| |
| if (image) { |
| ret = boottime->free_pool(image); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to free image\n"); |
| return EFI_ST_FAILURE; |
| } |
| } |
| return ret; |
| } |
| |
| /* |
| * Execute unit test. |
| * |
| * Try loading an image via the EFI_LOAD_FILE_PROTOCOL and the |
| * EFI_LOAD_FILE2_PROTOCOL. Finally execute the image. |
| * |
| * @return: EFI_ST_SUCCESS for success |
| */ |
| static int efi_st_load_file_execute(void) |
| { |
| efi_status_t ret; |
| efi_handle_t handle; |
| efi_uintn_t exit_data_size = 0; |
| u16 *exit_data = NULL; |
| u16 expected_text[] = EFI_ST_SUCCESS_STR; |
| |
| load_file_call_count = 0; |
| load_file2_call_count = 0; |
| handle = NULL; |
| ret = boottime->load_image(true, image_handle, &dp_lf_file.v.dp, NULL, |
| 0, &handle); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to load image\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (load_file2_call_count || !load_file_call_count) { |
| efi_st_error("Wrong image loaded\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->unload_image(handle); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to unload image\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| load_file_call_count = 0; |
| load_file2_call_count = 0; |
| handle = NULL; |
| ret = boottime->load_image(false, image_handle, &dp_lf_file.v.dp, NULL, |
| 0, &handle); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to load image\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (load_file2_call_count || !load_file_call_count) { |
| efi_st_error("Wrong image loaded\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->unload_image(handle); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to unload image\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| ret = boottime->load_image(true, image_handle, &dp_lf2_file.v.dp, NULL, |
| 0, &handle); |
| if (ret != EFI_NOT_FOUND) { |
| efi_st_error( |
| "Boot manager should not use LOAD_FILE2_PROTOCOL\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| load_file_call_count = 0; |
| load_file2_call_count = 0; |
| handle = NULL; |
| ret = boottime->load_image(false, image_handle, &dp_lf2_file.v.dp, NULL, |
| 0, &handle); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to load image\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (!load_file2_call_count || load_file_call_count) { |
| efi_st_error("Wrong image loaded\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| ret = boottime->start_image(handle, &exit_data_size, &exit_data); |
| if (ret != EFI_UNSUPPORTED) { |
| efi_st_error("Wrong return value from application\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (!exit_data || exit_data_size != sizeof(expected_text) || |
| memcmp(exit_data, expected_text, sizeof(expected_text))) { |
| efi_st_error("Incorrect exit data\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->free_pool(exit_data); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Failed to free exit data\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| return EFI_ST_SUCCESS; |
| } |
| |
| EFI_UNIT_TEST(load_file_protocol) = { |
| .name = "load file protocol", |
| .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT, |
| .setup = efi_st_load_file_setup, |
| .execute = efi_st_load_file_execute, |
| .teardown = efi_st_load_file_teardown, |
| }; |