ARM: dts: stm32: Add alternate pinmux for CAN1 pins
Add another mux option for CAN1 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index 6a5b401..e0965c5 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -929,6 +929,26 @@
};
};
+ m_can1_pins_c: m-can1-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+ bias-disable;
+ };
+ };
+
+ m_can1_sleep_pins_c: m_can1-sleep-2 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+ <STM32_PINMUX('H', 14, ANALOG)>; /* CAN1_RX */
+ };
+ };
+
m_can2_pins_a: m-can2-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */