ARM: DRA7xx: Enable FIT for hs platforms
Use a single defconfig for all DRA7xx hs platforms by enabling FIT and delete
the platform specific defconfigs.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
new file mode 100644
index 0000000..6933ab5
--- /dev/null
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -0,0 +1,61 @@
+CONFIG_ARM=y
+CONFIG_OMAP54XX=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DM_GPIO=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
+CONFIG_SPL=y
+CONFIG_SPL_STACK_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_OF_BOARD_SETUP=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_DM_MMC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SYS_NS16550=y
+CONFIG_TI_QSPI=y
+CONFIG_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_OMAP=y
+CONFIG_USB_DWC3_PHY_OMAP=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
+CONFIG_G_DNL_VENDOR_NUM=0x0451
+CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_FIT=y
+CONFIG_SPL_OF_LIBFDT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_OF_LIST="dra7-evm dra72-evm"