drivers: net: mc: Report extra memory to Linux
MC firmware need to be aligned to 512M, so minimum 512MB DDR is reserved.
But MC support to work with 128MB or 256MB DDR memory also, in this
case, rest of the memory is not usable.
So reporting this extra memory to Linux through dtb memory fixup.
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index f3885fa..3dfbfeb 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -529,11 +529,26 @@
int ft_board_setup(void *blob, bd_t *bd)
{
int i;
- u64 base[CONFIG_NR_DRAM_BANKS];
- u64 size[CONFIG_NR_DRAM_BANKS];
+ u16 mc_memory_bank = 0;
+
+ u64 *base;
+ u64 *size;
+ u64 mc_memory_base = 0;
+ u64 mc_memory_size = 0;
+ u16 total_memory_banks;
ft_cpu_setup(blob, bd);
+ fdt_fixup_mc_ddr(&mc_memory_base, &mc_memory_size);
+
+ if (mc_memory_base != 0)
+ mc_memory_bank++;
+
+ total_memory_banks = CONFIG_NR_DRAM_BANKS + mc_memory_bank;
+
+ base = calloc(total_memory_banks, sizeof(u64));
+ size = calloc(total_memory_banks, sizeof(u64));
+
/* fixup DT for the three GPP DDR banks */
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
base[i] = gd->bd->bi_dram[i].start;
@@ -553,7 +568,17 @@
size[2] = gd->arch.resv_ram - base[2];
#endif
+ if (mc_memory_base != 0) {
+ for (i = 0; i <= total_memory_banks; i++) {
+ if (base[i] == 0 && size[i] == 0) {
+ base[i] = mc_memory_base;
+ size[i] = mc_memory_size;
+ break;
+ }
+ }
+ }
+
- fdt_fixup_memory_banks(blob, base, size, CONFIG_NR_DRAM_BANKS);
+ fdt_fixup_memory_banks(blob, base, size, total_memory_banks);
#ifdef CONFIG_USB
fsl_fdt_fixup_dr_usb(blob, bd);