sunxi: musb: Power off OTG port VBUS when disabled
The Linux kernel musb driver expects VBUS to be off while initializing
musb. Having it on results in a repeating string of warnings, followed
by an unusable peripheral. The peripheral is only usable after
physically removing the OTG adapter, letting musb reset its state.
This partially reverts commit c9f8947e6604 ("sunxi: usb-phy: Never
power off the usb ports")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h
index 6a14cad..cef6c98 100644
--- a/arch/arm/include/asm/arch-sunxi/usb_phy.h
+++ b/arch/arm/include/asm/arch-sunxi/usb_phy.h
@@ -16,7 +16,6 @@
void sunxi_usb_phy_exit(int index);
void sunxi_usb_phy_power_on(int index);
void sunxi_usb_phy_power_off(int index);
-int sunxi_usb_phy_power_is_on(int index);
int sunxi_usb_phy_vbus_detect(int index);
int sunxi_usb_phy_id_detect(int index);
void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c
index f9993d2..bd1bbee 100644
--- a/arch/arm/mach-sunxi/usb_phy.c
+++ b/arch/arm/mach-sunxi/usb_phy.c
@@ -296,13 +296,6 @@
gpio_set_value(phy->gpio_vbus, 0);
}
-int sunxi_usb_phy_power_is_on(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- return phy->power_on_count > 0;
-}
-
int sunxi_usb_phy_vbus_detect(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index c016a0b..dece781 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -205,6 +205,8 @@
static int sunxi_musb_enable(struct musb *musb)
{
+ int ret;
+
pr_debug("%s():\n", __func__);
musb_ep_select(musb->mregs, 0);
@@ -217,26 +219,17 @@
musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
if (is_host_enabled(musb)) {
- int id = sunxi_usb_phy_id_detect(0);
-
- if (id == 1 && sunxi_usb_phy_power_is_on(0))
- sunxi_usb_phy_power_off(0);
-
- if (!sunxi_usb_phy_power_is_on(0)) {
- int vbus = sunxi_usb_phy_vbus_detect(0);
- if (vbus == 1) {
- printf("A charger is plugged into the OTG: ");
- return -ENODEV;
- }
+ ret = sunxi_usb_phy_vbus_detect(0);
+ if (ret == 1) {
+ printf("A charger is plugged into the OTG: ");
+ return -ENODEV;
}
-
- if (id == 1) {
+ ret = sunxi_usb_phy_id_detect(0);
+ if (ret == 1) {
printf("No host cable detected: ");
return -ENODEV;
}
-
- if (!sunxi_usb_phy_power_is_on(0))
- sunxi_usb_phy_power_on(0);
+ sunxi_usb_phy_power_on(0); /* port power on */
}
USBC_ForceVbusValidToHigh(musb->mregs);
@@ -252,6 +245,9 @@
if (!enabled)
return;
+ if (is_host_enabled(musb))
+ sunxi_usb_phy_power_off(0); /* port power off */
+
USBC_ForceVbusValidToLow(musb->mregs);
mdelay(200); /* Wait for the current session to timeout */