diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 295b824..ef0f4ff 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -69,8 +69,17 @@
 #define CONFIG_SYS_SCSI_MAX_LUN			1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_MMC_ENV_DEV         0
 
-#ifndef CONFIG_FSL_QSPI
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_OFFSET		0x500000	/* 5MB */
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + \
+					 CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SECT_SIZE		0x40000
+#endif
+
+#if !defined(CONFIG_FSL_QSPI) || defined(CONFIG_TFABOOT)
 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
 
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
@@ -212,9 +221,11 @@
 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
 
+#ifndef CONFIG_TFABOOT
 #define CONFIG_ENV_OFFSET		(2048 * 1024)
 #define CONFIG_ENV_SECT_SIZE		0x20000
 #define CONFIG_ENV_SIZE			0x2000
+#endif
 #define CONFIG_SPL_PAD_TO		0x80000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(1024 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 * 1024)
@@ -237,10 +248,12 @@
 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
 
+#ifndef CONFIG_TFABOOT
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE		0x20000
 #define CONFIG_ENV_SIZE			0x2000
 #endif
+#endif
 
 /* Debug Server firmware */
 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
@@ -323,6 +336,27 @@
 	func(SCSI, scsi, 0)
 #include <config_distro_bootcmd.h>
 
+#ifdef CONFIG_TFABOOT
+#define QSPI_MC_INIT_CMD			\
+	"env exists secureboot && "		\
+	"esbc_validate 0x20700000 && "		\
+	"esbc_validate 0x20740000;"		\
+	"fsl_mc start mc 0x20a00000 0x20e00000 \0"
+#define SD_MC_INIT_CMD				\
+	"mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+	"mmc read 0x80100000 0x7000 0x800;"	\
+	"env exists secureboot && "		\
+	"mmc read 0x80700000 0x3800 0x10 && "	\
+	"mmc read 0x80740000 0x3A00 0x10 && "	\
+	"esbc_validate 0x80700000 && "		\
+	"esbc_validate 0x80740000 ;"		\
+	"fsl_mc start mc 0x80000000 0x80100000\0"
+#define IFC_MC_INIT_CMD				\
+	"env exists secureboot && "	\
+	"esbc_validate 0x580700000 && "		\
+	"esbc_validate 0x580740000; "		\
+	"fsl_mc start mc 0x580a00000 0x580e00000 \0"
+#else
 #ifdef CONFIG_QSPI_BOOT
 #define MC_INIT_CMD				\
 	"mcinitcmd=env exists secureboot && "	\
@@ -347,9 +381,80 @@
 	"esbc_validate 0x580740000; "		\
 	"fsl_mc start mc 0x580a00000 0x580e00000 \0"
 #endif
+#endif
 
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CONFIG_TFABOOT
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"fdt_high=0xa0000000\0"			\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"fdt_addr=0x64f00000\0"			\
+	"kernel_addr=0x581000000\0"		\
+	"kernel_start=0x1000000\0"		\
+	"kernelheader_start=0x800000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernelheader_addr=0x580800000\0"	\
+	"kernel_addr_r=0x81000000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_size_sd=0x14000\0"              \
+	"console=ttyAMA0,38400n8\0"		\
+	"mcmemsize=0x70000000\0"		\
+	"sd_bootcmd=echo Trying load from SD ..;" \
+	"mmcinfo; mmc read $load_addr "		\
+	"$kernel_addr_sd $kernel_size_sd && "	\
+	"bootm $load_addr#$board\0"             \
+	QSPI_MC_INIT_CMD				\
+	BOOTENV					\
+	"boot_scripts=ls2088ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls2088ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"scan_dev_for_boot="					\
+		"echo Scanning ${devtype} "			\
+			"${devnum}:${distro_bootpart}...; "	\
+		"for prefix in ${boot_prefixes}; do "		\
+			"run scan_dev_for_scripts; "		\
+		"done;\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} "	\
+			"${scriptaddr} ${prefix}${script}; "	\
+		"env exists secureboot && load ${devtype} "	\
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
+			"&& esbc_validate ${scripthdraddr};"	\
+		"source ${scriptaddr}\0"			\
+	"qspi_bootcmd=echo Trying load from qspi..;"		\
+		"sf probe && sf read $load_addr "		\
+		"$kernel_start $kernel_size ; env exists secureboot &&"	\
+		"sf read $kernelheader_addr_r $kernelheader_start "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0"			\
+	"nor_bootcmd=echo Trying load from nor..;"		\
+		"cp.b $kernel_addr $load_addr "			\
+		"$kernel_size ; env exists secureboot && "	\
+		"cp.b $kernelheader_addr $kernelheader_addr_r "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		"bootm $load_addr#$board\0"
+#else
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"ramdisk_addr=0x800000\0"		\
@@ -418,7 +523,36 @@
 		"cp.b $kernelheader_addr $kernelheader_addr_r "	\
 		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
 		"bootm $load_addr#$board\0"
+#endif
+
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND						\
+			"env exists mcinitcmd && env exists secureboot "\
+			"&& esbc_validate 0x20780000; "			\
+			"env exists mcinitcmd && "			\
+			"fsl_mc lazyapply dpl 0x20d00000; "		\
+			"run distro_bootcmd;run qspi_bootcmd; "		\
+			"env exists secureboot && esbc_halt;"
+
+/* Try to boot an on-SD kernel first, then do normal distro boot */
+#define SD_BOOTCOMMAND						\
+			"env exists mcinitcmd && env exists secureboot "\
+			"&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \
+			"&& esbc_validate $load_addr; "			\
+			"env exists mcinitcmd && run mcinitcmd "	\
+			"&& mmc read 0x88000000 0x6800 0x800 "		\
+			"&& fsl_mc lazyapply dpl 0x88000000; "		\
+			"run distro_bootcmd;run sd_bootcmd; "		\
+			"env exists secureboot && esbc_halt;"
 
+/* Try to boot an on-NOR kernel first, then do normal distro boot */
+#define IFC_NOR_BOOTCOMMAND						\
+			"env exists mcinitcmd && env exists secureboot "\
+			"&& esbc_validate 0x580780000; env exists mcinitcmd "\
+			"&& fsl_mc lazyapply dpl 0x580d00000;"		\
+			"run distro_bootcmd;run nor_bootcmd; "		\
+			"env exists secureboot && esbc_halt;"
+#else
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_QSPI_BOOT
 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
@@ -449,6 +583,7 @@
 			"run distro_bootcmd;run nor_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 #endif
+#endif
 
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET