Merge branch 'master' of git://git.denx.de/u-boot-i2c
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 4ee0e9a..fe851f1 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -58,7 +58,9 @@
COBJS-$(CONFIG_P1022) += ddr-gen3.o
COBJS-$(CONFIG_P2010) += ddr-gen3.o
COBJS-$(CONFIG_P2020) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o
COBJS-$(CONFIG_CPM2) += ether_fcc.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index fe2b52d..f15d43c 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -179,7 +179,7 @@
#ifdef CONFIG_SYS_DPAA_FMAN
for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
- printf(" FMAN%d: %s MHz\n", i,
+ printf(" FMAN%d: %s MHz\n", i + 1,
strmhz(buf1, sysinfo.freqFMan[i]));
}
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index d491e2a..5d5b4c2 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -39,10 +39,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_MPC8536
-extern void fsl_serdes_init(void);
-#endif
-
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
@@ -185,9 +181,6 @@
/* Config QE ioports */
config_qe_ioports();
#endif
-#if defined(CONFIG_MPC8536)
- fsl_serdes_init();
-#endif
#if defined(CONFIG_FSL_DMA)
dma_init();
#endif
@@ -332,6 +325,11 @@
qe_reset();
#endif
+#if defined(CONFIG_SYS_HAS_SERDES)
+ /* needs to be in ram since code uses global static vars */
+ fsl_serdes_init();
+#endif
+
#if defined(CONFIG_MP)
setup_mp();
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 2628cc5..932466e 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -298,17 +298,17 @@
}
#if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
-static void ft_fixup_clks(void *blob, const char *alias, unsigned long freq)
+static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
+ unsigned long freq)
{
- const char *path = fdt_get_alias(blob, alias);
-
- int off = fdt_path_offset(blob, path);
+ phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS;
+ int off = fdt_node_offset_by_compat_reg(blob, compat, phys);
if (off >= 0) {
off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
if (off > 0)
printf("WARNING enable to set clock-frequency "
- "for %s: %s\n", alias, fdt_strerror(off));
+ "for %s: %s\n", compat, fdt_strerror(off));
}
}
@@ -317,14 +317,17 @@
sys_info_t sysinfo;
get_sys_info(&sysinfo);
- ft_fixup_clks(blob, "fman0", sysinfo.freqFMan[0]);
+ ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
+ sysinfo.freqFMan[0]);
#if (CONFIG_SYS_NUM_FMAN == 2)
- ft_fixup_clks(blob, "fman1", sysinfo.freqFMan[1]);
+ ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
+ sysinfo.freqFMan[1]);
#endif
#ifdef CONFIG_SYS_DPAA_PME
- ft_fixup_clks(blob, "pme", sysinfo.freqPME);
+ do_fixup_by_compat_u32(blob, "fsl,pme",
+ "clock-frequency", sysinfo.freqPME, 1);
#endif
}
#else
@@ -400,6 +403,11 @@
"clock-frequency", bd->bi_brgfreq, 1);
#endif
+#ifdef CONFIG_FSL_CORENET
+ do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
+ "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+#endif
+
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
#ifdef CONFIG_MP
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
index 7e72f5f..6dadeb8 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
@@ -66,10 +66,11 @@
#define FSL_SRDSCR3_LANEE_SGMII 0x00000000
#define FSL_SRDSCR3_LANEE_SATA 0x00150005
-
#define SRDS1_MAX_LANES 8
#define SRDS2_MAX_LANES 2
+static u32 serdes1_prtcl_map, serdes2_prtcl_map;
+
static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
[0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE},
[0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1},
@@ -86,39 +87,12 @@
int is_serdes_configured(enum srds_prtcl device)
{
- int i;
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 pordevsr = in_be32(&gur->pordevsr);
- u32 srds1_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+ int ret = (1 << device) & serdes1_prtcl_map;
- u32 srds2_cfg = (pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >>
- GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT;
-
- debug("%s: dev = %d\n", __FUNCTION__, device);
- debug("PORDEVSR[IO_SEL] = %x\n", srds1_cfg);
- debug("PORDEVSR[SRDS2_IO_SEL] = %x\n", srds2_cfg);
-
- if (srds1_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
- printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds1_cfg);
- return 0;
- }
+ if (ret)
+ return ret;
- if (srds2_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
- printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_cfg);
- return 0;
- }
-
- for (i = 0; i < SRDS1_MAX_LANES; i++) {
- if (serdes1_cfg_tbl[srds1_cfg][i] == device)
- return 1;
- }
- for (i = 0; i < SRDS2_MAX_LANES; i++) {
- if (serdes2_cfg_tbl[srds2_cfg][i] == device)
- return 1;
- }
-
- return 0;
+ return (1 << device) & serdes2_prtcl_map;
}
void fsl_serdes_init(void)
@@ -126,13 +100,20 @@
void *guts = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
void *sd = (void *)CONFIG_SYS_MPC85xx_SERDES2_ADDR;
u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS);
- u32 srds2_io_sel;
+ u32 srds1_io_sel, srds2_io_sel;
u32 tmp;
+ int lane;
+
+ srds1_io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+ MPC85xx_PORDEVSR_IO_SEL_SHIFT;
/* parse the SRDS2_IO_SEL of PORDEVSR */
srds2_io_sel = (pordevsr & GUTS_PORDEVSR_SERDES2_IO_SEL)
>> GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT;
+ debug("PORDEVSR[SRDS1_IO_SEL] = %x\n", srds1_io_sel);
+ debug("PORDEVSR[SRDS2_IO_SEL] = %x\n", srds2_io_sel);
+
switch (srds2_io_sel) {
case 1: /* Lane A - SATA1, Lane E - SATA2 */
/* CR 0 */
@@ -246,4 +227,23 @@
default:
break;
}
+
+ if (srds1_io_sel > ARRAY_SIZE(serdes1_cfg_tbl)) {
+ printf("Invalid PORDEVSR[SRDS1_IO_SEL] = %d\n", srds1_io_sel);
+ return;
+ }
+ for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds1_io_sel][lane];
+ serdes1_prtcl_map |= (1 << lane_prtcl);
+ }
+
+ if (srds2_io_sel > ARRAY_SIZE(serdes2_cfg_tbl)) {
+ printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_io_sel);
+ return;
+ }
+
+ for (lane = 0; lane < SRDS2_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds2_io_sel][lane];
+ serdes2_prtcl_map |= (1 << lane_prtcl);
+ }
}
diff --git a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
index 6b0fbf2..e4c9c22 100644
--- a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
@@ -17,6 +17,8 @@
#define SRDS1_MAX_LANES 4
#define SRDS2_MAX_LANES 2
+static u32 serdes1_prtcl_map, serdes2_prtcl_map;
+
static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
[0x00] = {NONE, NONE, NONE, NONE},
[0x01] = {NONE, NONE, NONE, NONE},
@@ -73,26 +75,40 @@
int is_serdes_configured(enum srds_prtcl device)
{
+ int ret = (1 << device) & serdes1_prtcl_map;
+
+ if (ret)
+ return ret;
+
+ return (1 << device) & serdes2_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
u32 pordevsr = in_be32(&gur->pordevsr);
u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
- unsigned int i;
+ int lane;
- debug("%s: dev = %d\n", __FUNCTION__, device);
- debug("PORDEVSR[IO_SEL] = 0x%x\n", srds_cfg);
+ debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
- printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds_cfg);
- return 0;
+ printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+ return;
+ }
+ for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
+ serdes1_prtcl_map |= (1 << lane_prtcl);
}
- for (i = 0; i < SRDS1_MAX_LANES; i++) {
- if (serdes1_cfg_tbl[srds_cfg][i] == device)
- return 1;
- if (serdes2_cfg_tbl[srds_cfg][i] == device)
- return 1;
+ if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
+ printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+ return;
}
- return 0;
+ for (lane = 0; lane < SRDS2_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane];
+ serdes2_prtcl_map |= (1 << lane_prtcl);
+ }
}
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 22f3423..dc3da16 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -80,10 +80,16 @@
CPU_TYPE_ENTRY(P2010, P2010_E, 1),
CPU_TYPE_ENTRY(P2020, P2020, 2),
CPU_TYPE_ENTRY(P2020, P2020_E, 2),
+ CPU_TYPE_ENTRY(P3041, P3041, 4),
+ CPU_TYPE_ENTRY(P3041, P3041_E, 4),
CPU_TYPE_ENTRY(P4040, P4040, 4),
CPU_TYPE_ENTRY(P4040, P4040_E, 4),
CPU_TYPE_ENTRY(P4080, P4080, 8),
CPU_TYPE_ENTRY(P4080, P4080_E, 8),
+ CPU_TYPE_ENTRY(P5010, P5010, 1),
+ CPU_TYPE_ENTRY(P5010, P5010_E, 1),
+ CPU_TYPE_ENTRY(P5020, P5020, 2),
+ CPU_TYPE_ENTRY(P5020, P5020_E, 2),
#elif defined(CONFIG_MPC86xx)
CPU_TYPE_ENTRY(8610, 8610, 1),
CPU_TYPE_ENTRY(8641, 8641, 2),
diff --git a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
index 0f69ef9..2fee995 100644
--- a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+++ b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
@@ -767,6 +767,13 @@
debug("\n\n");
+#if defined(CONFIG_DDR_RFDC_FIXED)
+ mtsdram(SDRAM_RFDC, CONFIG_DDR_RFDC_FIXED);
+ size = 512;
+ rffd_average = CONFIG_DDR_RFDC_FIXED & SDRAM_RFDC_RFFD_MASK;
+ mfsdram(SDRAM_RDCC, rdcc); /* record this value */
+ cal->rdcc = rdcc;
+#else /* CONFIG_DDR_RFDC_FIXED */
in_window = 0;
rdcc = 0;
@@ -830,6 +837,7 @@
rffd_average = SDRAM_RFDC_RFFD_MAX;
mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+#endif /* CONFIG_DDR_RFDC_FIXED */
rffd = rffd_average;
in_window = 0;
@@ -1211,10 +1219,14 @@
debug("*** best_result: read value SDRAM_RQDC 0x%08x\n",
rqdc_reg);
+#if defined(CONFIG_DDR_RFDC_FIXED)
+ mtsdram(SDRAM_RFDC, CONFIG_DDR_RFDC_FIXED);
+#else /* CONFIG_DDR_RFDC_FIXED */
mfsdram(SDRAM_RFDC, rfdc_reg);
rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
mtsdram(SDRAM_RFDC, rfdc_reg |
SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd));
+#endif /* CONFIG_DDR_RFDC_FIXED */
mfsdram(SDRAM_RFDC, rfdc_reg);
debug("*** best_result: read value SDRAM_RFDC 0x%08x\n",
diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile
index 88d53fb..c9c1a33 100644
--- a/arch/powerpc/cpu/ppc4xx/Makefile
+++ b/arch/powerpc/cpu/ppc4xx/Makefile
@@ -51,6 +51,9 @@
COBJS += denali_data_eye.o
COBJS += denali_spd_ddr2.o
COBJS += ecc.o
+ifdef CONFIG_CMD_ECCTEST
+COBJS += cmd_ecctest.o
+endif
COBJS += fdt.o
COBJS += interrupts.o
COBJS += iop480_uart.o
diff --git a/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c b/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c
new file mode 100644
index 0000000..b4eac40
--- /dev/null
+++ b/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c
@@ -0,0 +1,284 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \
+ defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC)
+
+#if defined(CONFIG_405EX)
+/*
+ * Currently only 405EX uses 16bit data bus width as an alternative
+ * option to 32bit data width (SDRAM0_MCOPT1_WDTH)
+ */
+#define SDRAM_DATA_ALT_WIDTH 2
+#else
+#define SDRAM_DATA_ALT_WIDTH 8
+#endif
+
+#if defined(CONFIG_SYS_OCM_BASE)
+#define CONFIG_FUNC_ISRAM_ADDR CONFIG_SYS_OCM_BASE
+#endif
+
+#if defined(CONFIG_SYS_ISRAM_BASE)
+#define CONFIG_FUNC_ISRAM_ADDR CONFIG_SYS_ISRAM_BASE
+#endif
+
+#if !defined(CONFIG_FUNC_ISRAM_ADDR)
+#error "No internal SRAM/OCM provided!"
+#endif
+
+#define force_inline inline __attribute__ ((always_inline))
+
+static inline void machine_check_disable(void)
+{
+ mtmsr(mfmsr() & ~MSR_ME);
+}
+
+static inline void machine_check_enable(void)
+{
+ mtmsr(mfmsr() | MSR_ME);
+}
+
+/*
+ * These helper functions need to be inlined, since they
+ * are called from the functions running from internal SRAM.
+ * SDRAM operation is forbidden at that time, so calling
+ * functions in SDRAM has to be avoided.
+ */
+static force_inline void wait_ddr_idle(void)
+{
+ u32 val;
+
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
+}
+
+static force_inline void recalibrate_ddr(void)
+{
+ u32 val;
+
+ /*
+ * Rewrite RQDC & RFDC to calibrate again. If this is not
+ * done, the SDRAM controller is working correctly after
+ * changing the MCOPT1_MCHK bits.
+ */
+ mfsdram(SDRAM_RQDC, val);
+ mtsdram(SDRAM_RQDC, val);
+ mfsdram(SDRAM_RFDC, val);
+ mtsdram(SDRAM_RFDC, val);
+}
+
+static force_inline void set_mcopt1_mchk(u32 bits)
+{
+ u32 val;
+
+ wait_ddr_idle();
+ mfsdram(SDRAM_MCOPT1, val);
+ mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | bits);
+ recalibrate_ddr();
+}
+
+/*
+ * The next 2 functions are copied to internal SRAM/OCM and run
+ * there. No function calls allowed here. No SDRAM acitivity should
+ * be done here.
+ */
+static void inject_ecc_error(void *ptr, int par)
+{
+ u32 val;
+
+ /*
+ * Taken from PPC460EX/EXr/GT users manual (Rev 1.21)
+ * 22.2.17.13 ECC Diagnostics
+ *
+ * Items 1 ... 5 are already done by now, running from RAM
+ * with ECC enabled
+ */
+
+ out_be32(ptr, 0x00000000);
+ val = in_be32(ptr);
+
+ /* 6. Set memory controller to no error checking */
+ set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_NON);
+
+ /* 7. Modify one or two bits for error simulation */
+ if (par == 1)
+ out_be32(ptr, in_be32(ptr) ^ 0x00000001);
+ else
+ out_be32(ptr, in_be32(ptr) ^ 0x00000003);
+
+ /* 8. Wait for SDRAM idle */
+ val = in_be32(ptr);
+ set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_CHK_REP);
+
+ /* Wait for SDRAM idle */
+ wait_ddr_idle();
+
+ /* Continue with 9. in calling function... */
+}
+
+static void rewrite_ecc_parity(void *ptr, int par)
+{
+ u32 current_address = (u32)ptr;
+ u32 end_address;
+ u32 address_increment;
+ u32 mcopt1;
+ u32 val;
+
+ /*
+ * Fill ECC parity byte again. Otherwise further accesses to
+ * the failure address will result in exceptions.
+ */
+
+ /* Wait for SDRAM idle */
+ val = in_be32(0x00000000);
+ set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_GEN);
+
+ /* ECC bit set method for non-cached memory */
+ mfsdram(SDRAM_MCOPT1, mcopt1);
+ if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
+ address_increment = 4;
+ else
+ address_increment = SDRAM_DATA_ALT_WIDTH;
+ end_address = current_address + CONFIG_SYS_CACHELINE_SIZE;
+
+ while (current_address < end_address) {
+ *((unsigned long *)current_address) = 0;
+ current_address += address_increment;
+ }
+
+ set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_CHK_REP);
+
+ /* Wait for SDRAM idle */
+ wait_ddr_idle();
+}
+
+static int do_ecctest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ u32 old_val;
+ u32 val;
+ u32 *ptr;
+ void (*sram_func)(u32 *, int);
+ int error;
+
+ if (argc < 3) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ ptr = (u32 *)simple_strtoul(argv[1], NULL, 16);
+ error = simple_strtoul(argv[2], NULL, 16);
+ if ((error < 1) || (error > 2)) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ printf("Using address %p for %d bit ECC error injection\n",
+ ptr, error);
+
+ /*
+ * Save value to restore it later on
+ */
+ old_val = in_be32(ptr);
+
+ /*
+ * Copy ECC injection function into internal SRAM/OCM
+ */
+ sram_func = (void *)CONFIG_FUNC_ISRAM_ADDR;
+ memcpy((void *)CONFIG_FUNC_ISRAM_ADDR, inject_ecc_error, 0x10000);
+
+ /*
+ * Disable interrupts and exceptions before calling this
+ * function in internal SRAM/OCM
+ */
+ disable_interrupts();
+ machine_check_disable();
+ eieio();
+
+ /*
+ * Jump to ECC simulation function in internal SRAM/OCM
+ */
+ (*sram_func)(ptr, error);
+
+ /* 10. Read the corresponding address */
+ val = in_be32(ptr);
+
+ /*
+ * Read and print ECC status register/info:
+ * The faulting address is only known upon uncorrectable ECC
+ * errors.
+ */
+ mfsdram(SDRAM_ECCES, val);
+ if (val & SDRAM_ECCES_CE)
+ printf("ECC: Correctable error\n");
+ if (val & SDRAM_ECCES_UE) {
+ printf("ECC: Uncorrectable error at 0x%02x%08x\n",
+ mfdcr(SDRAM_ERRADDULL), mfdcr(SDRAM_ERRADDLLL));
+ }
+
+ /*
+ * Clear pending interrupts/exceptions
+ */
+ mtsdram(SDRAM_ECCES, 0xffffffff);
+ mtdcr(SDRAM_ERRSTATLL, 0xff000000);
+ set_mcsr(get_mcsr());
+
+ /* Now enable interrupts and exceptions again */
+ eieio();
+ machine_check_enable();
+ enable_interrupts();
+
+ /*
+ * The ECC parity byte need to be re-written for the
+ * corresponding address. Otherwise future accesses to it
+ * will result in exceptions.
+ *
+ * Jump to ECC parity generation function
+ */
+ memcpy((void *)CONFIG_FUNC_ISRAM_ADDR, rewrite_ecc_parity, 0x10000);
+ (*sram_func)(ptr, 0);
+
+ /*
+ * Restore value in corresponding address
+ */
+ out_be32(ptr, old_val);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ ecctest, 3, 0, do_ecctest,
+ "Test ECC by single and double error bit injection",
+ "address 1/2"
+);
+
+#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */
+#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */
diff --git a/arch/powerpc/cpu/ppc4xx/ecc.c b/arch/powerpc/cpu/ppc4xx/ecc.c
index f105605..49f28d9 100644
--- a/arch/powerpc/cpu/ppc4xx/ecc.c
+++ b/arch/powerpc/cpu/ppc4xx/ecc.c
@@ -130,7 +130,26 @@
/* clear ECC error repoting registers */
mtsdram(SDRAM_ECCES, 0xffffffff);
- mtdcr(0x4c, 0xffffffff);
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
+ /*
+ * IBM DDR(1) core (440GX):
+ * Clear Mx bits in SDRAM0_BESR0/1
+ */
+ mtsdram(SDRAM0_BESR0, 0xffffffff);
+ mtsdram(SDRAM0_BESR1, 0xffffffff);
+#elif defined(CONFIG_440)
+ /*
+ * 440/460 DDR2 core:
+ * Clear EMID (Error PLB Master ID) in MQ0_ESL
+ */
+ mtdcr(SDRAM_ERRSTATLL, 0xfff00000);
+#else
+ /*
+ * 405EX(r) DDR2 core:
+ * Clear M0ID (Error PLB Master ID) in SDRAM_BESR
+ */
+ mtsdram(SDRAM_BESR, 0xf0000000);
+#endif
mtsdram(SDRAM_MCOPT1,
(mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP);
diff --git a/arch/powerpc/cpu/ppc4xx/traps.c b/arch/powerpc/cpu/ppc4xx/traps.c
index 1616772..b5562ad 100644
--- a/arch/powerpc/cpu/ppc4xx/traps.c
+++ b/arch/powerpc/cpu/ppc4xx/traps.c
@@ -209,6 +209,22 @@
/* Clear MCSR */
mtspr(SPRN_MCSR, val);
}
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+ /*
+ * Read and print ECC status register/info:
+ * The faulting address is only known upon uncorrectable ECC
+ * errors.
+ */
+ mfsdram(SDRAM_ECCES, val);
+ if (val & SDRAM_ECCES_CE)
+ printf("ECC: Correctable error\n");
+ if (val & SDRAM_ECCES_UE) {
+ printf("ECC: Uncorrectable error at 0x%02x%08x\n",
+ mfdcr(SDRAM_ERRADDULL), mfdcr(SDRAM_ERRADDLLL));
+ }
+#endif /* CONFIG_DDR_ECC ... */
+
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
mfsdram(DDR0_00, val) ;
printf("DDR0: DDR0_00 %lx\n", val);
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index d88c282..f70699d 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -44,8 +44,12 @@
defined(CONFIG_P1021) || defined(CONFIG_P1022) || \
defined(CONFIG_P2020) || defined(CONFIG_MPC8641)
#define CONFIG_MAX_CPUS 2
+#elif defined(CONFIG_PPC_P3041)
+#define CONFIG_MAX_CPUS 4
#elif defined(CONFIG_PPC_P4080)
#define CONFIG_MAX_CPUS 8
+#elif defined(CONFIG_PPC_P5020)
+#define CONFIG_MAX_CPUS 2
#else
#define CONFIG_MAX_CPUS 1
#endif
diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h
index bb87543..dc5c579 100644
--- a/arch/powerpc/include/asm/fsl_pci.h
+++ b/arch/powerpc/include/asm/fsl_pci.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -29,8 +29,8 @@
int fsl_is_pci_agent(struct pci_controller *hose);
void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data);
void fsl_pci_config_unlock(struct pci_controller *hose);
-void ft_fsl_pci_setup(void *blob, const char *pci_alias,
- struct pci_controller *hose);
+void ft_fsl_pci_setup(void *blob, const char *pci_compat,
+ struct pci_controller *hose, unsigned long ctrl_addr);
/*
* Common PCI/PCIE Register structure for mpc85xx and mpc86xx
@@ -202,4 +202,82 @@
x.pci_num = num; \
}
+#define __FT_FSL_PCI_SETUP(blob, compat, num) \
+ ft_fsl_pci_setup(blob, compat, &pci##num##_hose, \
+ CONFIG_SYS_PCI##num##_ADDR)
+
+#define __FT_FSL_PCI_DEL(blob, compat, num) \
+ ft_fsl_pci_setup(blob, compat, NULL, CONFIG_SYS_PCI##num##_ADDR)
+
+#define __FT_FSL_PCIE_SETUP(blob, compat, num) \
+ ft_fsl_pci_setup(blob, compat, &pcie##num##_hose, \
+ CONFIG_SYS_PCIE##num##_ADDR)
+
+#define __FT_FSL_PCIE_DEL(blob, compat, num) \
+ ft_fsl_pci_setup(blob, compat, NULL, CONFIG_SYS_PCIE##num##_ADDR)
+
+#ifdef CONFIG_PCI1
+#define FT_FSL_PCI1_SETUP __FT_FSL_PCI_SETUP(blob, FSL_PCI_COMPAT, 1)
+#else
+#define FT_FSL_PCI1_SETUP __FT_FSL_PCI_DEL(blob, FSL_PCI_COMPAT, 1)
+#endif
+
+#ifdef CONFIG_PCI2
+#define FT_FSL_PCI2_SETUP __FT_FSL_PCI_SETUP(blob, FSL_PCI_COMPAT, 2)
+#else
+#define FT_FSL_PCI2_SETUP __FT_FSL_PCI_DEL(blob, FSL_PCI_COMPAT, 2)
+#endif
+
+#ifdef CONFIG_PCIE1
+#define FT_FSL_PCIE1_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 1)
+#else
+#define FT_FSL_PCIE1_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 1)
+#endif
+
+#ifdef CONFIG_PCIE2
+#define FT_FSL_PCIE2_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 2)
+#else
+#define FT_FSL_PCIE2_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 2)
+#endif
+
+#ifdef CONFIG_PCIE3
+#define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 3)
+#else
+#define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 3)
+#endif
+
+#ifdef CONFIG_PCIE4
+#define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 4)
+#else
+#define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 4)
+#endif
+
+#if defined(CONFIG_FSL_CORENET)
+#define FSL_PCIE_COMPAT "fsl,p4080-pcie"
+#define FT_FSL_PCI_SETUP \
+ FT_FSL_PCIE1_SETUP; \
+ FT_FSL_PCIE2_SETUP; \
+ FT_FSL_PCIE3_SETUP; \
+ FT_FSL_PCIE4_SETUP;
+#elif defined(CONFIG_MPC85xx)
+#define FSL_PCI_COMPAT "fsl,mpc8540-pci"
+#define FSL_PCIE_COMPAT "fsl,mpc8548-pcie"
+#define FT_FSL_PCI_SETUP \
+ FT_FSL_PCI1_SETUP; \
+ FT_FSL_PCI2_SETUP; \
+ FT_FSL_PCIE1_SETUP; \
+ FT_FSL_PCIE2_SETUP; \
+ FT_FSL_PCIE3_SETUP;
+#elif defined(CONFIG_MPC86xx)
+#define FSL_PCI_COMPAT "fsl,mpc8610-pci"
+#define FSL_PCIE_COMPAT "fsl,mpc8641-pcie"
+#define FT_FSL_PCI_SETUP \
+ FT_FSL_PCI1_SETUP; \
+ FT_FSL_PCIE1_SETUP; \
+ FT_FSL_PCIE2_SETUP;
+#else
+#error FT_FSL_PCI_SETUP not defined
+#endif
+
+
#endif
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index d4839f4..c7877b9 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -44,5 +44,6 @@
};
int is_serdes_configured(enum srds_prtcl device);
+void fsl_serdes_init(void);
#endif /* __FSL_SERDES_H */
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 4e665d3..b1d219b 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2060,8 +2060,17 @@
#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x5000
#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x6000
#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x7000
+#define CONFIG_SYS_MPC85xx_PCI1_OFFSET 0x8000
#define CONFIG_SYS_MPC85xx_PCIX_OFFSET 0x8000
+#define CONFIG_SYS_MPC85xx_PCI2_OFFSET 0x9000
#define CONFIG_SYS_MPC85xx_PCIX2_OFFSET 0x9000
+#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0xa000
+#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x9000
+#if defined(CONFIG_MPC8572) || defined(CONFIG_P2020)
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x8000
+#else
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0xb000
+#endif
#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0xF000
#define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x18000
#define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000
@@ -2138,6 +2147,17 @@
#define CONFIG_SYS_FSL_SEC_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_PCI1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET)
+#define CONFIG_SYS_PCI2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI2_OFFSET)
+#define CONFIG_SYS_PCIE1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE1_OFFSET)
+#define CONFIG_SYS_PCIE2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE2_OFFSET)
+#define CONFIG_SYS_PCIE3_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE3_OFFSET)
+
#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
index b9e02db..4bebb68 100644
--- a/arch/powerpc/include/asm/immap_86xx.h
+++ b/arch/powerpc/include/asm/immap_86xx.h
@@ -1257,6 +1257,23 @@
#define CONFIG_SYS_MPC86xx_DMA_OFFSET (0x21000)
#define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
+#define CONFIG_SYS_MPC86xx_PCI1_OFFSET 0x8000
+#ifdef CONFIG_MPC8610
+#define CONFIG_SYS_MPC86xx_PCIE1_OFFSET 0xa000
+#else
+#define CONFIG_SYS_MPC86xx_PCIE1_OFFSET 0x8000
+#endif
+#define CONFIG_SYS_MPC86xx_PCIE2_OFFSET 0x9000
+
+#define CONFIG_SYS_PCI1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCI1_OFFSET)
+#define CONFIG_SYS_PCI2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCI2_OFFSET)
+#define CONFIG_SYS_PCIE1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCIE1_OFFSET)
+#define CONFIG_SYS_PCIE2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCIE2_OFFSET)
+
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
#define CONFIG_SYS_MDIO1_OFFSET 0x24000
#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h
index d9506e2..4ec1ef8 100644
--- a/arch/powerpc/include/asm/ppc4xx-sdram.h
+++ b/arch/powerpc/include/asm/ppc4xx-sdram.h
@@ -63,6 +63,8 @@
#define SDRAM_CFG0 0x20 /* memory controller options 0 */
#define SDRAM_CFG1 0x21 /* memory controller options 1 */
+#define SDRAM0_BESR0 0x0000 /* bus error status reg 0 */
+#define SDRAM0_BESR1 0x0008 /* bus error status reg 1 */
#define SDRAM0_BEAR 0x0010 /* bus error address reg */
#define SDRAM0_SLIO 0x0018 /* ddr sdram slave interface options */
#define SDRAM0_CFG0 0x0020 /* ddr sdram options 0 */
@@ -363,6 +365,7 @@
/*
* Memory controller registers
*/
+#ifdef CONFIG_405EX
#define SDRAM_BESR 0x00 /* PLB bus error status (read/clear) */
#define SDRAM_BESRT 0x01 /* PLB bus error status (test/set) */
#define SDRAM_BEARL 0x02 /* PLB bus error address low */
@@ -371,11 +374,10 @@
#define SDRAM_WMIRQT 0x07 /* PLB write master interrupt (test/set) */
#define SDRAM_PLBOPT 0x08 /* PLB slave options */
#define SDRAM_PUABA 0x09 /* PLB upper address base */
-#ifndef CONFIG_405EX
-#define SDRAM_MCSTAT 0x14 /* memory controller status */
-#else
#define SDRAM_MCSTAT 0x1F /* memory controller status */
-#endif
+#else /* CONFIG_405EX */
+#define SDRAM_MCSTAT 0x14 /* memory controller status */
+#endif /* CONFIG_405EX */
#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 844552c..89f283a 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1052,10 +1052,16 @@
#define SVR_P2010_E 0x80EB00
#define SVR_P2020 0x80E200
#define SVR_P2020_E 0x80EA00
+#define SVR_P3041 0x821103
+#define SVR_P3041_E 0x821903
#define SVR_P4040 0x820100
#define SVR_P4040_E 0x820900
#define SVR_P4080 0x820000
#define SVR_P4080_E 0x820800
+#define SVR_P5010 0x822100
+#define SVR_P5010_E 0x822900
+#define SVR_P5020 0x822000
+#define SVR_P5020_E 0x822800
#define SVR_8610 0x80A000
#define SVR_8641 0x809000
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 23874d2..158f7bb 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -34,7 +34,17 @@
DECLARE_GLOBAL_DATA_PTR;
-#define CONFIG_SYS_BCSR3_PCIE 0x10
+ struct board_bcsr {
+ u8 board_id;
+ u8 cpld_rev;
+ u8 led_user;
+ u8 board_status;
+ u8 reset_ctrl;
+ u8 flash_ctrl;
+ u8 eth_ctrl;
+ u8 usb_ctrl;
+ u8 irq_ctrl;
+};
#define BOARD_CANYONLANDS_PCIE 1
#define BOARD_CANYONLANDS_SATA 2
@@ -112,6 +122,9 @@
{
#if !defined(CONFIG_ARCHES)
u32 sdr0_cust0;
+ struct board_bcsr *bcsr_data =
+ (struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
+
#endif
/*
@@ -172,14 +185,10 @@
#if !defined(CONFIG_ARCHES)
/* Enable ethernet and take out of reset */
- out_8((void *)CONFIG_SYS_BCSR_BASE + 6, 0);
+ out_8(&bcsr_data->eth_ctrl, 0) ;
/* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */
- out_8((void *)CONFIG_SYS_BCSR_BASE + 5, 0);
-
- /* Enable USB host & USB-OTG */
- out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 0);
-
+ out_8(&bcsr_data->flash_ctrl, 0) ;
mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */
/* Setup PLB4-AHB bridge based on the system address map */
@@ -200,6 +209,41 @@
return 0;
}
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
+int usb_board_init(void)
+{
+ struct board_bcsr *bcsr_data =
+ (struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
+ u8 val;
+
+ /* Enable USB host & USB-OTG */
+ val = in_8(&bcsr_data->usb_ctrl);
+ val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
+ out_8(&bcsr_data->usb_ctrl, val);
+
+ return 0;
+}
+
+int usb_board_stop(void)
+{
+ struct board_bcsr *bcsr_data =
+ (struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
+ u8 val;
+
+ /* Disable USB host & USB-OTG */
+ val = in_8(&bcsr_data->usb_ctrl);
+ val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
+ out_8(&bcsr_data->usb_ctrl, val);
+
+ return 0;
+}
+
+int usb_board_init_fail(void)
+{
+ return usb_board_stop();
+}
+#endif /* CONFIG_USB_OHCI_NEW && CONFIG_SYS_USB_OHCI_BOARD_INIT */
#if !defined(CONFIG_ARCHES)
static void canyonlands_sata_init(int board_type)
@@ -244,11 +288,13 @@
#if !defined(CONFIG_ARCHES)
int checkboard(void)
{
+ struct board_bcsr *bcsr_data =
+ (struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
char *s = getenv("serial#");
if (pvr_460ex()) {
printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
- if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 3)) & CONFIG_SYS_BCSR3_PCIE)
+ if (in_8(&bcsr_data->board_status) & BCSR_SELECT_PCIE)
gd->board_type = BOARD_CANYONLANDS_PCIE;
else
gd->board_type = BOARD_CANYONLANDS_SATA;
@@ -268,7 +314,7 @@
break;
}
- printf(", Rev. %X", in_8((void *)(CONFIG_SYS_BCSR_BASE + 0)));
+ printf(", Rev. %X", in_8(&bcsr_data->cpld_rev));
if (s != NULL) {
puts(", serial# ");
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
index 4f7d935..671f9e9 100644
--- a/board/atum8548/atum8548.c
+++ b/board/atum8548/atum8548.c
@@ -292,14 +292,6 @@
{
ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCI2
- ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+ FT_FSL_PCI_SETUP;
}
#endif
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index 50ca3ca..c8e0856 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -396,26 +396,8 @@
{
ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#else
- ft_fsl_pci_setup(blob, "pci0", NULL);
-#endif
-#ifdef CONFIG_PCIE2
- ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#else
- ft_fsl_pci_setup(blob, "pci1", NULL);
-#endif
-#ifdef CONFIG_PCIE2
- ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#else
- ft_fsl_pci_setup(blob, "pci2", NULL);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci3", &pcie3_hose);
-#else
- ft_fsl_pci_setup(blob, "pci3", NULL);
-#endif
+ FT_FSL_PCI_SETUP;
+
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 581d5f2..da3a2b6 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -360,19 +360,8 @@
{
ft_cpu_setup(blob, bd);
+ FT_FSL_PCI_SETUP;
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE2
- ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci2", &pcie3_hose);
-#endif
-#ifdef CONFIG_PCIE3
- ft_fsl_pci_setup(blob, "pci3", &pcie2_hose);
-#endif
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index f016995..23e552b 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2004, 2007, 200 Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007, 2009-2010 Freescale Semiconductor, Inc.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
@@ -388,11 +388,6 @@
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_pci_setup(void *blob, bd_t *bd)
{
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+ FT_FSL_PCI_SETUP;
}
#endif
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 036bf95..bd859e4 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
@@ -426,11 +426,6 @@
{
ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+ FT_FSL_PCI_SETUP;
}
#endif
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 81e8ff5..01b7dcb 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2009 Freescale Semiconductor.
+ * Copyright 2009-2010 Freescale Semiconductor.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
@@ -635,9 +635,8 @@
#endif
ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+ FT_FSL_PCI_SETUP;
+
fdt_board_fixup_esdhc(blob, bd);
fdt_board_fixup_qe_uart(blob, bd);
fdt_board_fixup_qe_usb(blob, bd);
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 81d481a..6b96dfc 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -345,15 +345,8 @@
fdt_fixup_memory(blob, (u64)base, (u64)size);
-#ifdef CONFIG_PCIE3
- ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
-#endif
-#ifdef CONFIG_PCIE2
- ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+ FT_FSL_PCI_SETUP;
+
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index 2ef7b23..6578f58 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -309,15 +309,7 @@
{
ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
-#ifdef CONFIG_PCIE2
- ft_fsl_pci_setup(blob, "pci2", &pcie2_hose);
-#endif
+ FT_FSL_PCI_SETUP;
}
#endif
diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index bd357b8..8c8ce95 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008,2010 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -32,14 +32,14 @@
*
* 0x0000_0000 0x7fff_ffff DDR 2G
* if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
+ * 0x8000_0000 0x9fff_ffff PCIE1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCIE2 MEM 512M
* else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
* 0x8000_0000 0x9fff_ffff RapidIO 512M
* endif
* (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT)
- * 0xffc0_0000 0xffc0_ffff PCI1 IO 64K
- * 0xffc1_0000 0xffc1_ffff PCI2 IO 64K
+ * 0xffc0_0000 0xffc0_ffff PCIE1 IO 64K
+ * 0xffc1_0000 0xffc1_ffff PCIE2 IO 64K
* 0xffe0_0000 0xffef_ffff CCSRBAR 1M
* 0xffdf_0000 0xffe0_0000 PIXIS, CF 64K
* 0xef80_0000 0xefff_ffff FLASH (boot bank) 8M
@@ -54,10 +54,10 @@
SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
#endif
#ifdef CONFIG_PCI
- SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
- SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
- SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
- SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
#elif defined(CONFIG_RIO)
SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
#endif
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index b352c33..d86ca12 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2006, 2007 Freescale Semiconductor.
+ * Copyright 2006, 2007, 2010 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -129,21 +129,21 @@
#if defined(CONFIG_PCI)
-static struct pci_controller pci1_hose;
+static struct pci_controller pcie1_hose;
#endif /* CONFIG_PCI */
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif /* CONFIG_PCI2 */
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif /* CONFIG_PCIE2 */
int first_free_busno = 0;
void pci_init_board(void)
{
-#ifdef CONFIG_PCI1
+#ifdef CONFIG_PCIE1
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- struct pci_controller *hose = &pci1_hose;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
+ struct pci_controller *hose = &pcie1_hose;
struct pci_region *r = hose->regions;
volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
@@ -169,16 +169,16 @@
/* outbound memory */
pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
+ CONFIG_SYS_PCIE1_MEM_BUS,
+ CONFIG_SYS_PCIE1_MEM_PHYS,
+ CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
+ CONFIG_SYS_PCIE1_IO_BUS,
+ CONFIG_SYS_PCIE1_IO_PHYS,
+ CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
@@ -195,8 +195,8 @@
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
*/
- in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_VIRT
- + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
+ in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT
+ + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
} else {
puts("PCI-EXPRESS 1: Disabled\n");
@@ -204,26 +204,26 @@
}
#else
puts("PCI-EXPRESS1: Disabled\n");
-#endif /* CONFIG_PCI1 */
+#endif /* CONFIG_PCIE1 */
-#ifdef CONFIG_PCI2
+#ifdef CONFIG_PCIE2
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
- struct pci_controller *hose = &pci2_hose;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
+ struct pci_controller *hose = &pcie2_hose;
struct pci_region *r = hose->regions;
/* outbound memory */
pci_set_region(r++,
- CONFIG_SYS_PCI2_MEM_BUS,
- CONFIG_SYS_PCI2_MEM_PHYS,
- CONFIG_SYS_PCI2_MEM_SIZE,
+ CONFIG_SYS_PCIE2_MEM_BUS,
+ CONFIG_SYS_PCIE2_MEM_PHYS,
+ CONFIG_SYS_PCIE2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
- CONFIG_SYS_PCI2_IO_BUS,
- CONFIG_SYS_PCI2_IO_PHYS,
- CONFIG_SYS_PCI2_IO_SIZE,
+ CONFIG_SYS_PCIE2_IO_BUS,
+ CONFIG_SYS_PCIE2_IO_PHYS,
+ CONFIG_SYS_PCIE2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
@@ -238,7 +238,7 @@
}
#else
puts("PCI-EXPRESS 2: Disabled\n");
-#endif /* CONFIG_PCI2 */
+#endif /* CONFIG_PCIE2 */
}
@@ -253,12 +253,7 @@
ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCI2
- ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
-#endif
+ FT_FSL_PCI_SETUP;
/*
* Warn if it looks like the device tree doesn't match u-boot.
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index be692cb..5cdee9f 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -322,23 +322,7 @@
fdt_fixup_memory(blob, (u64)base, (u64)size);
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci0", &pcie1_hose);
-#else
- ft_fsl_pci_setup(blob, "pci0", NULL);
-#endif
-
-#ifdef CONFIG_PCIE2
- ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#else
- ft_fsl_pci_setup(blob, "pci1", NULL);
-#endif
-
-#ifdef CONFIG_PCIE3
- ft_fsl_pci_setup(blob, "pci2", &pcie3_hose);
-#else
- ft_fsl_pci_setup(blob, "pci2", NULL);
-#endif
+ FT_FSL_PCI_SETUP;
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c
index aa2f64c..97d4f83 100644
--- a/board/freescale/p1_p2_rdb/pci.c
+++ b/board/freescale/p1_p2_rdb/pci.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -100,16 +100,5 @@
void ft_pci_board_setup(void *blob)
{
-/* According to h/w manual, PCIE2 is at lower address(0x9000)
- * than PCIE1(0xa000).
- * Hence PCIE2 is made to occupy the pci1 position in dts to
- * keep the addresses sorted there.
- * Generally the case with all FSL SOCs.
- */
-#ifdef CONFIG_PCIE2
- ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+ FT_FSL_PCI_SETUP;
}
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index be4b2eb..3fd1b34 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -366,15 +366,8 @@
fdt_fixup_memory(blob, (u64)base, (u64)size);
-#ifdef CONFIG_PCIE3
- ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
-#endif
-#ifdef CONFIG_PCIE2
- ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+ FT_FSL_PCI_SETUP;
+
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index d62cfd1..733979c 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -398,11 +398,9 @@
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
+
+#ifdef CONFIG_FSL_PCI_INIT
+ FT_FSL_PCI_SETUP;
#endif
}
#endif
diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c
index d20fa51..705e1c2 100644
--- a/board/sbc8641d/law.c
+++ b/board/sbc8641d/law.c
@@ -32,11 +32,11 @@
*
* 0x0000_0000 DDR 256M
* 0x1000_0000 DDR2 256M
- * 0x8000_0000 PCI1 MEM 512M
- * 0xa000_0000 PCI2 MEM 512M
+ * 0x8000_0000 PCIE1 MEM 512M
+ * 0xa000_0000 PCIE2 MEM 512M
* 0xc000_0000 RapidIO 512M
- * 0xe200_0000 PCI1 IO 16M
- * 0xe300_0000 PCI2 IO 16M
+ * 0xe200_0000 PCIE1 IO 16M
+ * 0xe300_0000 PCIE2 IO 16M
* 0xf800_0000 CCSRBAR 2M
* 0xfe00_0000 FLASH (boot bank) 32M
*
@@ -49,11 +49,11 @@
SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
#endif
- SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
- SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
- SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
- SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
};
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index c4e9875..54b2d0b 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -191,16 +191,16 @@
};
#endif
-static struct pci_controller pci1_hose = {
+static struct pci_controller pcie1_hose = {
#ifndef CONFIG_PCI_PNP
config_table:pci_mpc86xxcts_config_table
#endif
};
#endif /* CONFIG_PCI */
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif /* CONFIG_PCI2 */
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif /* CONFIG_PCIE2 */
int first_free_busno = 0;
@@ -212,10 +212,10 @@
uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
>> MPC8641_PORDEVSR_IO_SEL_SHIFT;
-#ifdef CONFIG_PCI1
+#ifdef CONFIG_PCIE1
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- struct pci_controller *hose = &pci1_hose;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
+ struct pci_controller *hose = &pcie1_hose;
struct pci_region *r = hose->regions;
#ifdef DEBUG
uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
@@ -236,16 +236,16 @@
/* outbound memory */
pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
+ CONFIG_SYS_PCIE1_MEM_BUS,
+ CONFIG_SYS_PCIE1_MEM_PHYS,
+ CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
+ CONFIG_SYS_PCIE1_IO_BUS,
+ CONFIG_SYS_PCIE1_IO_PHYS,
+ CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
@@ -264,26 +264,26 @@
}
#else
puts("PCI-EXPRESS1: Disabled\n");
-#endif /* CONFIG_PCI1 */
+#endif /* CONFIG_PCIE1 */
-#ifdef CONFIG_PCI2
+#ifdef CONFIG_PCIE2
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
- struct pci_controller *hose = &pci2_hose;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
+ struct pci_controller *hose = &pcie2_hose;
struct pci_region *r = hose->regions;
/* outbound memory */
pci_set_region(r++,
- CONFIG_SYS_PCI2_MEM_BUS,
- CONFIG_SYS_PCI2_MEM_PHYS,
- CONFIG_SYS_PCI2_MEM_SIZE,
+ CONFIG_SYS_PCIE2_MEM_BUS,
+ CONFIG_SYS_PCIE2_MEM_PHYS,
+ CONFIG_SYS_PCIE2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
- CONFIG_SYS_PCI2_IO_BUS,
- CONFIG_SYS_PCI2_IO_PHYS,
- CONFIG_SYS_PCI2_IO_SIZE,
+ CONFIG_SYS_PCIE2_IO_BUS,
+ CONFIG_SYS_PCIE2_IO_PHYS,
+ CONFIG_SYS_PCIE2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
@@ -298,7 +298,7 @@
}
#else
puts("PCI-EXPRESS 2: Disabled\n");
-#endif /* CONFIG_PCI2 */
+#endif /* CONFIG_PCIE2 */
}
@@ -308,12 +308,7 @@
{
ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCI2
- ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
-#endif
+ FT_FSL_PCI_SETUP;
}
#endif
diff --git a/board/t3corp/chip_config.c b/board/t3corp/chip_config.c
index c00bf16..98ab49f 100644
--- a/board/t3corp/chip_config.c
+++ b/board/t3corp/chip_config.c
@@ -27,13 +27,27 @@
struct ppc4xx_config ppc4xx_config_val[] = {
{
- "600", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+ "600-67", "CPU: 600 PLB: 200 OPB: 67 EBC: 67",
+ {
+ 0x86, 0x80, 0xce, 0x1f, 0x7d, 0x80, 0x00, 0xe0,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "600-100", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
{
0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
}
},
{
+ "667", "CPU: 667 PLB: 166 OPB: 83 EBC: 83",
+ {
+ 0x06, 0x80, 0xbb, 0x14, 0x99, 0x82, 0x00, 0xa0,
+ 0x40, 0x88, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
"800", "CPU: 800 PLB: 200 OPB: 100 EBC: 100",
{
0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
diff --git a/board/t3corp/init.S b/board/t3corp/init.S
index 4a4217f..ecd35ff 100644
--- a/board/t3corp/init.S
+++ b/board/t3corp/init.S
@@ -81,11 +81,13 @@
tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xc, AC_RW | SA_IG)
/* TLB-entry for FPGA(s) */
- tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_1M, CONFIG_SYS_FPGA1_BASE, 4,
+ tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_16M, CONFIG_SYS_FPGA1_BASE, 4,
AC_RW | SA_IG)
- tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_1M, CONFIG_SYS_FPGA2_BASE, 4,
+ tlbentry(CONFIG_SYS_FPGA1_BASE + (16 << 20), SZ_16M,
+ CONFIG_SYS_FPGA1_BASE + (16 << 20), 4, AC_RW | SA_IG)
+ tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_16M, CONFIG_SYS_FPGA2_BASE, 4,
AC_RW | SA_IG)
- tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_1M, CONFIG_SYS_FPGA3_BASE, 4,
+ tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_16M, CONFIG_SYS_FPGA3_BASE, 4,
AC_RW | SA_IG)
/* TLB-entry for OCM */
diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c
index 8ffa321..ddf5897 100644
--- a/board/t3corp/t3corp.c
+++ b/board/t3corp/t3corp.c
@@ -45,7 +45,7 @@
mtdcr(UIC1SR, 0xffffffff); /* clear all */
mtdcr(UIC1ER, 0x00000000); /* disable all */
mtdcr(UIC1CR, 0x00000000); /* all non-critical */
- mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC1PR, 0x7fffffff); /* per ref-board manual */
mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
mtdcr(UIC1SR, 0xffffffff); /* clear all */
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index fc2a6cb..dda2cb6 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -687,12 +687,7 @@
{
ft_cpu_setup (blob, bd);
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+ FT_FSL_PCI_SETUP;
}
#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c
index 3a81827..ece7882 100644
--- a/board/xes/common/fsl_8xxx_pci.c
+++ b/board/xes/common/fsl_8xxx_pci.c
@@ -398,18 +398,6 @@
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_pci_setup(void *blob, bd_t *bd)
{
- /* TODO - make node name (eg pci0) dynamic */
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
-#ifdef CONFIG_PCIE2
- ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE3
- ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
-#endif
+ FT_FSL_PCI_SETUP;
}
#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 4d87135..718b635 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -2,6 +2,8 @@
* (C) Copyright 2007
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -861,3 +863,292 @@
off = fdt_path_offset(blob, "/aliases");
fdt_delprop(blob, off, alias);
}
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const __be32 *cell, int size)
+{
+ u64 r = 0;
+ while (size--)
+ r = (r << 32) | be32_to_cpu(*(cell++));
+ return r;
+}
+
+static int of_n_cells(const void *blob, int nodeoffset, const char *name)
+{
+ int np;
+ const int *ip;
+
+ do {
+ np = fdt_parent_offset(blob, nodeoffset);
+
+ if (np >= 0)
+ nodeoffset = np;
+ ip = (int *)fdt_getprop(blob, nodeoffset, name, NULL);
+ if (ip)
+ return be32_to_cpup(ip);
+ } while (np >= 0);
+
+ /* No #<NAME>-cells property for the root node */
+ return 1;
+}
+
+int of_n_addr_cells(const void *blob, int nodeoffset)
+{
+ return of_n_cells(blob, nodeoffset, "#address-cells");
+}
+
+int of_n_size_cells(const void *blob, int nodeoffset)
+{
+ return of_n_cells(blob, nodeoffset, "#size-cells");
+}
+
+#define PRu64 "%llx"
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS 4
+#define OF_BAD_ADDR ((u64)-1)
+#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
+ (ns) > 0)
+
+/* Debug utility */
+#ifdef DEBUG
+static void of_dump_addr(const char *s, const u32 *addr, int na)
+{
+ printf("%s", s);
+ while(na--)
+ printf(" %08x", *(addr++));
+ printf("\n");
+}
+#else
+static void of_dump_addr(const char *s, const u32 *addr, int na) { }
+#endif
+
+/* Callbacks for bus specific translators */
+struct of_bus {
+ const char *name;
+ const char *addresses;
+ void (*count_cells)(void *blob, int offset,
+ int *addrc, int *sizec);
+ u64 (*map)(u32 *addr, const u32 *range,
+ int na, int ns, int pna);
+ int (*translate)(u32 *addr, u64 offset, int na);
+};
+
+/* Default translator (generic bus) */
+static void of_bus_default_count_cells(void *blob, int offset,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = of_n_addr_cells(blob, offset);
+ if (sizec)
+ *sizec = of_n_size_cells(blob, offset);
+}
+
+static u64 of_bus_default_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ cp = of_read_number(range, na);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr, na);
+
+ debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
+ cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+{
+ u64 a = of_read_number(addr, na);
+ memset(addr, 0, na * 4);
+ a += offset;
+ if (na > 1)
+ addr[na - 2] = a >> 32;
+ addr[na - 1] = a & 0xffffffffu;
+
+ return 0;
+}
+
+/* Array of bus specific translators */
+static struct of_bus of_busses[] = {
+ /* Default */
+ {
+ .name = "default",
+ .addresses = "reg",
+ .count_cells = of_bus_default_count_cells,
+ .map = of_bus_default_map,
+ .translate = of_bus_default_translate,
+ },
+};
+
+static int of_translate_one(void * blob, int parent, struct of_bus *bus,
+ struct of_bus *pbus, u32 *addr,
+ int na, int ns, int pna, const char *rprop)
+{
+ const u32 *ranges;
+ int rlen;
+ int rone;
+ u64 offset = OF_BAD_ADDR;
+
+ /* Normally, an absence of a "ranges" property means we are
+ * crossing a non-translatable boundary, and thus the addresses
+ * below the current not cannot be converted to CPU physical ones.
+ * Unfortunately, while this is very clear in the spec, it's not
+ * what Apple understood, and they do have things like /uni-n or
+ * /ht nodes with no "ranges" property and a lot of perfectly
+ * useable mapped devices below them. Thus we treat the absence of
+ * "ranges" as equivalent to an empty "ranges" property which means
+ * a 1:1 translation at that level. It's up to the caller not to try
+ * to translate addresses that aren't supposed to be translated in
+ * the first place. --BenH.
+ */
+ ranges = (u32 *)fdt_getprop(blob, parent, rprop, &rlen);
+ if (ranges == NULL || rlen == 0) {
+ offset = of_read_number(addr, na);
+ memset(addr, 0, pna * 4);
+ debug("OF: no ranges, 1:1 translation\n");
+ goto finish;
+ }
+
+ debug("OF: walking ranges...\n");
+
+ /* Now walk through the ranges */
+ rlen /= 4;
+ rone = na + pna + ns;
+ for (; rlen >= rone; rlen -= rone, ranges += rone) {
+ offset = bus->map(addr, ranges, na, ns, pna);
+ if (offset != OF_BAD_ADDR)
+ break;
+ }
+ if (offset == OF_BAD_ADDR) {
+ debug("OF: not found !\n");
+ return 1;
+ }
+ memcpy(addr, ranges + na, 4 * pna);
+
+ finish:
+ of_dump_addr("OF: parent translation for:", addr, pna);
+ debug("OF: with offset: "PRu64"\n", offset);
+
+ /* Translate it into parent bus space */
+ return pbus->translate(addr, offset, pna);
+}
+
+/*
+ * Translate an address from the device-tree into a CPU physical address,
+ * this walks up the tree and applies the various bus mappings on the
+ * way.
+ *
+ * Note: We consider that crossing any level with #size-cells == 0 to mean
+ * that translation is impossible (that is we are not dealing with a value
+ * that can be mapped to a cpu physical address). This is not really specified
+ * that way, but this is traditionally the way IBM at least do things
+ */
+u64 __of_translate_address(void *blob, int node_offset, const u32 *in_addr,
+ const char *rprop)
+{
+ int parent;
+ struct of_bus *bus, *pbus;
+ u32 addr[OF_MAX_ADDR_CELLS];
+ int na, ns, pna, pns;
+ u64 result = OF_BAD_ADDR;
+
+ debug("OF: ** translation for device %s **\n",
+ fdt_get_name(blob, node_offset, NULL));
+
+ /* Get parent & match bus type */
+ parent = fdt_parent_offset(blob, node_offset);
+ if (parent < 0)
+ goto bail;
+ bus = &of_busses[0];
+
+ /* Cound address cells & copy address locally */
+ bus->count_cells(blob, node_offset, &na, &ns);
+ if (!OF_CHECK_COUNTS(na, ns)) {
+ printf("%s: Bad cell count for %s\n", __FUNCTION__,
+ fdt_get_name(blob, node_offset, NULL));
+ goto bail;
+ }
+ memcpy(addr, in_addr, na * 4);
+
+ debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
+ bus->name, na, ns, fdt_get_name(blob, parent, NULL));
+ of_dump_addr("OF: translating address:", addr, na);
+
+ /* Translate */
+ for (;;) {
+ /* Switch to parent bus */
+ node_offset = parent;
+ parent = fdt_parent_offset(blob, node_offset);
+
+ /* If root, we have finished */
+ if (parent < 0) {
+ debug("OF: reached root node\n");
+ result = of_read_number(addr, na);
+ break;
+ }
+
+ /* Get new parent bus and counts */
+ pbus = &of_busses[0];
+ pbus->count_cells(blob, node_offset, &pna, &pns);
+ if (!OF_CHECK_COUNTS(pna, pns)) {
+ printf("%s: Bad cell count for %s\n", __FUNCTION__,
+ fdt_get_name(blob, node_offset, NULL));
+ break;
+ }
+
+ debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
+ pbus->name, pna, pns, fdt_get_name(blob, parent, NULL));
+
+ /* Apply bus translation */
+ if (of_translate_one(blob, node_offset, bus, pbus,
+ addr, na, ns, pna, rprop))
+ break;
+
+ /* Complete the move up one level */
+ na = pna;
+ ns = pns;
+ bus = pbus;
+
+ of_dump_addr("OF: one level translation:", addr, na);
+ }
+ bail:
+
+ return result;
+}
+
+u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr)
+{
+ return __of_translate_address(blob, node_offset, in_addr, "ranges");
+}
+
+/**
+ * fdt_node_offset_by_compat_reg: Find a node that matches compatiable and
+ * who's reg property matches a physical cpu address
+ *
+ * @blob: ptr to device tree
+ * @compat: compatiable string to match
+ * @compat_off: property name
+ *
+ */
+int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
+ phys_addr_t compat_off)
+{
+ int len, off = fdt_node_offset_by_compatible(blob, -1, compat);
+ while (off != -FDT_ERR_NOTFOUND) {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len);
+ if (reg) {
+ if (compat_off == fdt_translate_address(blob, off, reg))
+ return off;
+ }
+ off = fdt_node_offset_by_compatible(blob, off, compat);
+ }
+
+ return -FDT_ERR_NOTFOUND;
+}
+
+
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 628bd59..6589076 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -43,7 +43,8 @@
defined(CONFIG_P1013) || defined(CONFIG_P1022) || \
defined(CONFIG_P2010) || defined(CONFIG_P2020)
#define FSL_HW_NUM_LAWS 12
-#elif defined(CONFIG_PPC_P4080)
+#elif defined(CONFIG_PPC_P3041) || defined(CONFIG_PPC_P4080) || \
+ defined(CONFIG_PPC_P5020)
#define FSL_HW_NUM_LAWS 32
#else
#error FSL_HW_NUM_LAWS not defined for this platform
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 5a63fa2..001e6eb 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -510,18 +510,25 @@
#include <libfdt.h>
#include <fdt_support.h>
-void ft_fsl_pci_setup(void *blob, const char *pci_alias,
- struct pci_controller *hose)
+void ft_fsl_pci_setup(void *blob, const char *pci_compat,
+ struct pci_controller *hose, unsigned long ctrl_addr)
{
- int off = fdt_path_offset(blob, pci_alias);
+ int off;
u32 bus_range[2];
+ phys_addr_t p_ctrl_addr = (phys_addr_t)ctrl_addr;
+
+ /* convert ctrl_addr to true physical address */
+ p_ctrl_addr = (phys_addr_t)ctrl_addr - CONFIG_SYS_CCSRBAR;
+ p_ctrl_addr += CONFIG_SYS_CCSRBAR_PHYS;
+
+ off = fdt_node_offset_by_compat_reg(blob, pci_compat, p_ctrl_addr);
if (off < 0)
return;
/* We assume a cfg_addr not being set means we didn't setup the controller */
if ((hose == NULL) || (hose->cfg_addr == NULL)) {
- fdt_del_node_and_alias(blob, pci_alias);
+ fdt_del_node(blob, off);
} else {
bus_range[0] = 0;
bus_range[1] = hose->last_busno - hose->first_busno;
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
index 49a86fd..c133033 100644
--- a/include/configs/ATUM8548.h
+++ b/include/configs/ATUM8548.h
@@ -91,9 +91,6 @@
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
#define PCI_SPEED 33333000 /* CPLD currenlty does not have PCI setup info */
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
/* DDR Setup */
#define CONFIG_FSL_DDR2
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index a014ad0..890a6c9 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -65,6 +65,7 @@
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
+#define CONFIG_SYS_HAS_SERDES /* has SERDES */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/
@@ -125,11 +126,6 @@
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#endif
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000)
-#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000)
-#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000)
-
/* DDR Setup */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_FSL_DDR2
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index faba353..96fd024 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -79,11 +79,6 @@
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
-#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0xb000)
-
/* DDR Setup */
#define CONFIG_FSL_DDR2
#undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index fdd3597..23594a7 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -80,10 +80,6 @@
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
-
/* DDR Setup */
#define CONFIG_FSL_DDR2
#undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 0cc2d47..bc6c5c7 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -75,9 +75,6 @@
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
-
/* DDR Setup */
#define CONFIG_FSL_DDR2
#undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index bb7bb47..92c2b49 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -103,9 +103,6 @@
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#endif
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
-
/* DDR Setup */
#define CONFIG_FSL_DDR3
#undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 57c2f2f..51e5d06 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -89,10 +89,6 @@
#endif
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
-
/* DDR Setup */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_FSL_DDR2
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 8382e3c..4d9606e 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -82,10 +82,6 @@
#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
-#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-
#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR+0x2c000)
/* DDR Setup */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 94e4d24..0d1f779 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2006 Freescale Semiconductor.
+ * Copyright 2006, 2010 Freescale Semiconductor.
*
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
@@ -58,8 +58,8 @@
#ifndef CONFIG_RIO /* RIO/PCI are mutually exclusive */
#define CONFIG_PCI 1 /* Enable PCI/PCIE */
-#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */
-#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */
+#define CONFIG_PCIE1 1 /* PCIE controler 1 (ULI bridge) */
+#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#endif
@@ -122,9 +122,6 @@
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW
#endif
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-
/*
* DDR Setup
*/
@@ -328,43 +325,43 @@
* Addresses are mapped 1-1.
*/
-#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCI1_MEM_BUS 0xe0000000
-#define CONFIG_SYS_PCI1_MEM_PHYS 0x0000000c00000000ULL
+#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0x0000000c00000000ULL
#else
-#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_VIRT
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_VIRT
+#define CONFIG_SYS_PCIE1_MEM_BUS CONFIG_SYS_PCIE1_MEM_VIRT
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_VIRT
#endif
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
-#define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000
-#define CONFIG_SYS_PCI1_IO_PHYS (CONFIG_SYS_PCI1_IO_VIRT \
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
+#define CONFIG_SYS_PCIE1_IO_PHYS (CONFIG_SYS_PCIE1_IO_VIRT \
| CONFIG_SYS_PHYS_ADDR_HIGH)
-#define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64K */
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64K */
#ifdef CONFIG_PHYS_64BIT
/*
- * Use the same PCI bus address on PCI1 and PCI2 if we have PHYS_64BIT.
+ * Use the same PCI bus address on PCIE1 and PCIE2 if we have PHYS_64BIT.
* This will increase the amount of PCI address space available for
* for mapping RAM.
*/
-#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI1_MEM_BUS
+#define CONFIG_SYS_PCIE2_MEM_BUS CONFIG_SYS_PCIE1_MEM_BUS
#else
-#define CONFIG_SYS_PCI2_MEM_BUS (CONFIG_SYS_PCI1_MEM_BUS \
- + CONFIG_SYS_PCI1_MEM_SIZE)
+#define CONFIG_SYS_PCIE2_MEM_BUS (CONFIG_SYS_PCIE1_MEM_BUS \
+ + CONFIG_SYS_PCIE1_MEM_SIZE)
#endif
-#define CONFIG_SYS_PCI2_MEM_VIRT (CONFIG_SYS_PCI1_MEM_VIRT \
- + CONFIG_SYS_PCI1_MEM_SIZE)
-#define CONFIG_SYS_PCI2_MEM_PHYS (CONFIG_SYS_PCI1_MEM_PHYS \
- + CONFIG_SYS_PCI1_MEM_SIZE)
-#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCI2_IO_BUS 0x00000000
-#define CONFIG_SYS_PCI2_IO_VIRT (CONFIG_SYS_PCI1_IO_VIRT \
- + CONFIG_SYS_PCI1_IO_SIZE)
-#define CONFIG_SYS_PCI2_IO_PHYS (CONFIG_SYS_PCI1_IO_PHYS \
- + CONFIG_SYS_PCI1_IO_SIZE)
-#define CONFIG_SYS_PCI2_IO_SIZE CONFIG_SYS_PCI1_IO_SIZE
+#define CONFIG_SYS_PCIE2_MEM_VIRT (CONFIG_SYS_PCIE1_MEM_VIRT \
+ + CONFIG_SYS_PCIE1_MEM_SIZE)
+#define CONFIG_SYS_PCIE2_MEM_PHYS (CONFIG_SYS_PCIE1_MEM_PHYS \
+ + CONFIG_SYS_PCIE1_MEM_SIZE)
+#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE2_IO_VIRT (CONFIG_SYS_PCIE1_IO_VIRT \
+ + CONFIG_SYS_PCIE1_IO_SIZE)
+#define CONFIG_SYS_PCIE2_IO_PHYS (CONFIG_SYS_PCIE1_IO_PHYS \
+ + CONFIG_SYS_PCIE1_IO_SIZE)
+#define CONFIG_SYS_PCIE2_IO_SIZE CONFIG_SYS_PCIE1_IO_SIZE
#if defined(CONFIG_PCI)
@@ -393,10 +390,10 @@
#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
/*PCIE video card used*/
-#define VIDEO_IO_OFFSET CONFIG_SYS_PCI2_IO_VIRT
+#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE2_IO_VIRT
/*PCI video card used*/
-/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/
+/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT*/
/* video */
#define CONFIG_VIDEO
@@ -409,7 +406,7 @@
#define CONFIG_ATI_RADEON_FB
#define CONFIG_VIDEO_LOGO
/*#define CONFIG_CONSOLE_CURSOR*/
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCI2_IO_VIRT
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE2_IO_VIRT
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
@@ -425,8 +422,6 @@
#define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE
#endif
-#define CONFIG_MPC86XX_PCI2
-
#endif /* CONFIG_PCI */
#if defined(CONFIG_TSEC_ENET)
@@ -497,17 +492,17 @@
#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U
/* if CONFIG_PCI:
- * BAT2 PCI1 and PCI1 MEM
+ * BAT2 PCIE1 and PCIE1 MEM
* if CONFIG_RIO
* BAT2 Rapidio Memory
*/
#ifdef CONFIG_PCI
-#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \
+#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \
| BATL_PP_RW | BATL_CACHEINHIBIT \
| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_1G \
+#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_1G \
| BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \
+#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \
| BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
#else /* CONFIG_RIO */
@@ -556,14 +551,14 @@
#endif
/*
- * BAT4 PCI1_IO and PCI2_IO
+ * BAT4 PCIE1_IO and PCIE2_IO
*/
-#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \
+#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \
| BATL_PP_RW | BATL_CACHEINHIBIT \
| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_128K \
+#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_128K \
| BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \
+#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \
| BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index b42b5d0..f9d12f5 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -30,6 +30,7 @@
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
+#define CONFIG_SYS_HAS_SERDES /* has SERDES */
#define CONFIG_PHYS_64BIT
#define CONFIG_ENABLE_36BIT_PHYS
@@ -60,10 +61,6 @@
#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) /* pci0 */
-#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) /* pci1 */
-#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000) /* pci2 */
-
/* DDR Setup */
#define CONFIG_DDR_SPD
#define CONFIG_VERY_BIG_RAM
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 3cebbab..fca3cdd 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -129,9 +129,6 @@
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#endif
-#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
-
/* DDR Setup */
#define CONFIG_FSL_DDR2
#undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 569da4f..bf2acbf 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -90,10 +90,6 @@
#endif
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
-
/* DDR Setup */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_FSL_DDR3 1
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 90abe14..d8f2602 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -137,10 +137,6 @@
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000)
-#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000)
-
/*
* DDR Setup
*/
diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h
index c63fd42..8770a8d 100644
--- a/include/configs/XPEDITE5170.h
+++ b/include/configs/XPEDITE5170.h
@@ -97,8 +97,6 @@
#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000)
-#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000)
/*
* Diagnostics
diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index df5ef78..83aeffd 100644
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -81,7 +81,6 @@
#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000)
/*
* Diagnostics
diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h
index 1d6091c..fc4a986 100644
--- a/include/configs/XPEDITE5370.h
+++ b/include/configs/XPEDITE5370.h
@@ -99,8 +99,6 @@
#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000)
-#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000)
/*
* Diagnostics
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index ac9b3c5..6fe7639 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -77,6 +77,13 @@
#define CONFIG_SYS_PCIE0_XCFGBASE 0xc3000000
#define CONFIG_SYS_PCIE1_XCFGBASE 0xc3001000
+/*
+ * BCSR bits as defined in the Canyonlands board user manual.
+ */
+#define BCSR_USBCTRL_OTG_RST 0x32
+#define BCSR_USBCTRL_HOST_RST 0x01
+#define BCSR_SELECT_PCIE 0x10
+
#define CONFIG_SYS_PCIE0_UTLBASE 0xc08010000ULL /* 36bit physical addr */
/* base address of inbound PCIe window */
@@ -417,6 +424,7 @@
#define CONFIG_SYS_USB_OHCI_REGS_BASE (CONFIG_SYS_AHB_BASE | 0xd0000)
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+#define CONFIG_SYS_USB_OHCI_BOARD_INIT
#endif
/*
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index fb8ccae..76e9a76 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -202,6 +202,7 @@
*/
#define CONFIG_CMD_CHIP_CONFIG
#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ECCTEST
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_PCI
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 3f4056e..c8b8d0d 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -109,10 +109,6 @@
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
-
/* DDR Setup */
#define CONFIG_FSL_DDR2
#undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 315eebe7..618513a 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -56,8 +56,8 @@
#define CONFIG_SYS_SCRATCH_VA 0xe8000000
#define CONFIG_PCI 1 /* Enable PCIE */
-#define CONFIG_PCI1 1 /* PCIE controler 1 (slot 1) */
-#define CONFIG_PCI2 1 /* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
@@ -108,9 +108,6 @@
#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-
/*
* DDR Setup
*/
@@ -307,23 +304,23 @@
* General PCI
* Addresses are mapped 1-1.
*/
-#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS
-#define CONFIG_SYS_PCI1_MEM_VIRT CONFIG_SYS_PCI1_MEM_BUS
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCI1_IO_BUS 0xe2000000
-#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BUS
-#define CONFIG_SYS_PCI1_IO_VIRT CONFIG_SYS_PCI1_IO_BUS
-#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
+#define CONFIG_SYS_PCIE1_MEM_VIRT CONFIG_SYS_PCIE1_MEM_BUS
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE1_IO_BUS 0xe2000000
+#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS
+#define CONFIG_SYS_PCIE1_IO_VIRT CONFIG_SYS_PCIE1_IO_BUS
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */
-#define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BUS
-#define CONFIG_SYS_PCI2_MEM_VIRT CONFIG_SYS_PCI2_MEM_BUS
-#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI2_IO_BUS 0xe3000000
-#define CONFIG_SYS_PCI2_IO_PHYS CONFIG_SYS_PCI2_IO_BUS
-#define CONFIG_SYS_PCI2_IO_VIRT CONFIG_SYS_PCI2_IO_BUS
-#define CONFIG_SYS_PCI2_IO_SIZE 0x1000000 /* 16M */
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS
+#define CONFIG_SYS_PCIE2_MEM_VIRT CONFIG_SYS_PCIE2_MEM_BUS
+#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
+#define CONFIG_SYS_PCIE2_IO_BUS 0xe3000000
+#define CONFIG_SYS_PCIE2_IO_PHYS CONFIG_SYS_PCIE2_IO_BUS
+#define CONFIG_SYS_PCIE2_IO_VIRT CONFIG_SYS_PCIE2_IO_BUS
+#define CONFIG_SYS_PCIE2_IO_SIZE 0x1000000 /* 16M */
#if defined(CONFIG_PCI)
@@ -409,10 +406,10 @@
* 0xa000_0000 512M PCI-Express 2 Memory
* Changed it for operating from 0xd0000000
*/
-#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \
+#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U
/*
@@ -452,10 +449,10 @@
* 0xe300_0000 16M PCI-Express 2 I/0
* Note that this is at 0xe0000000
*/
-#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \
+#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U
/*
diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h
index 0ecc5b1..b38886b 100644
--- a/include/configs/t3corp.h
+++ b/include/configs/t3corp.h
@@ -74,8 +74,8 @@
#define CONFIG_SYS_FLASH_SIZE (64 << 20)
#define CONFIG_SYS_FPGA1_BASE 0xe0000000
-#define CONFIG_SYS_FPGA2_BASE 0xe0100000
-#define CONFIG_SYS_FPGA3_BASE 0xe0200000
+#define CONFIG_SYS_FPGA2_BASE 0xe2000000
+#define CONFIG_SYS_FPGA3_BASE 0xe4000000
#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */
#define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4
@@ -84,14 +84,12 @@
(((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
| (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
-#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */
+#define CONFIG_SYS_OCM_BASE 0xE7000000 /* OCM: 64k */
#define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */
#define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000
#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal periph. */
-#define CONFIG_SYS_AHB_BASE 0xE2000000 /* int. AHB periph. */
-
/*
* Initial RAM & stack pointer (placed in OCM)
*/
@@ -121,6 +119,7 @@
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD reset cmd */
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method */
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
@@ -144,10 +143,13 @@
/*
* DDR2 SDRAM
*/
+#define CONFIG_SYS_MBYTES_SDRAM 256
+#define CONFIG_DDR_ECC
#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */
#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */
#undef CONFIG_PPC4xx_DDR_METHOD_A
+#define CONFIG_DDR_RFDC_FIXED 0x000001D7 /* optimal value */
/* DDR1/2 SDRAM Device Control Register Data Values */
/* Memory Queue */
@@ -162,9 +164,6 @@
#define CONFIG_SYS_SDRAM_CONF1HB 0x80001C80
#define CONFIG_SYS_SDRAM_CONFPATHB 0x10a68000
-#define CONFIG_DDR_ECC
-#define CONFIG_SYS_MBYTES_SDRAM 256
-
#define CAS_LATENCY JEDEC_MA_MR_CL_DDR2_5_0_CLK
/* DDR1/2 SDRAM Device Control Register Data Values */
@@ -360,6 +359,7 @@
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_CMD_CHIP_CONFIG
+#define CONFIG_CMD_ECCTEST
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SDRAM
@@ -417,7 +417,7 @@
#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \
EBC_BXAP_TWT_ENCODE(5) | \
EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(4) | \
+ EBC_BXAP_OEN_ENCODE(3) | \
EBC_BXAP_WBN_ENCODE(0) | \
EBC_BXAP_WBF_ENCODE(0) | \
EBC_BXAP_TH_ENCODE(1) | \
@@ -426,7 +426,7 @@
EBC_BXAP_BEM_RW | \
EBC_BXAP_PEN_DISABLED)
#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \
- EBC_BXCR_BS_1MB | \
+ EBC_BXCR_BS_32MB | \
EBC_BXCR_BU_RW | \
EBC_BXCR_BW_32BIT)
@@ -434,7 +434,7 @@
#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED | \
EBC_BXAP_TWT_ENCODE(5) | \
EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(4) | \
+ EBC_BXAP_OEN_ENCODE(3) | \
EBC_BXAP_WBN_ENCODE(0) | \
EBC_BXAP_WBF_ENCODE(0) | \
EBC_BXAP_TH_ENCODE(1) | \
@@ -443,7 +443,7 @@
EBC_BXAP_BEM_RW | \
EBC_BXAP_PEN_DISABLED)
#define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA2_BASE) | \
- EBC_BXCR_BS_1MB | \
+ EBC_BXCR_BS_16MB | \
EBC_BXCR_BU_RW | \
EBC_BXCR_BW_32BIT)
@@ -451,7 +451,7 @@
#define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_DISABLED | \
EBC_BXAP_TWT_ENCODE(5) | \
EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(4) | \
+ EBC_BXAP_OEN_ENCODE(3) | \
EBC_BXAP_WBN_ENCODE(0) | \
EBC_BXAP_WBF_ENCODE(0) | \
EBC_BXAP_TH_ENCODE(1) | \
@@ -460,7 +460,7 @@
EBC_BXAP_BEM_RW | \
EBC_BXAP_PEN_DISABLED)
#define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA3_BASE) | \
- EBC_BXCR_BS_1MB | \
+ EBC_BXCR_BS_16MB | \
EBC_BXCR_BU_RW | \
EBC_BXCR_BW_32BIT)
diff --git a/include/fdt_support.h b/include/fdt_support.h
index fc16159..54af9fe 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -83,6 +83,9 @@
void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
void fdt_del_node_and_alias(void *blob, const char *alias);
+u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr);
+int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
+ phys_addr_t compat_off);
#endif /* ifdef CONFIG_OF_LIBFDT */
#endif /* ifndef __FDT_SUPPORT_H */