arm: SC598-SOM-EZKIT initial support
Adds support for Analog Devices' SC598-SOM-EZKIT board. Includes:
- CONFIG options common to all SC5xx SoCs
- SoC specific configs in mach-sc5xx/Kconfig
- SPL config options in common/spl/Kconfig
- Memory Map for SPL
- Necessary board-specific init functions
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Co-developed-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
diff --git a/Kconfig b/Kconfig
index 82df59f..1596139 100644
--- a/Kconfig
+++ b/Kconfig
@@ -208,7 +208,7 @@
config NR_DRAM_BANKS
int "Number of DRAM banks"
- default 1 if ARCH_SUNXI || ARCH_OWL
+ default 1 if ARCH_SC5XX || ARCH_SUNXI || ARCH_OWL
default 4
help
This defines the number of DRAM banks.
@@ -545,6 +545,7 @@
default 0x12000000 if ARCH_MX6 && !(MX6SL || MX6SLL || MX6SX || MX6UL || MX6ULL)
default 0x80800000 if ARCH_MX7
default 0x90000000 if FSL_LSCH2 || FSL_LSCH3
+ default 0x0 if ARCH_SC5XX
help
Address in memory to use as the default safe load address.
@@ -644,6 +645,7 @@
default 0x2a000000 if MACH_SUN9I
default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
+ default 0x96000000 if ARCH_SC5XX && SC59X_64
hex "Text Base"
help
The address in memory that U-Boot will be copied and executed from
diff --git a/MAINTAINERS b/MAINTAINERS
index 0bc7f2f..0f4eee3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -607,12 +607,14 @@
F: arch/arm/dts/sc5*
F: arch/arm/include/asm/arch-adi/
F: arch/arm/mach-sc5xx/
+F: board/adi/
F: doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml
F: doc/device-tree-bindings/clock/adi,sc5xx-clocks.yaml
F: doc/device-tree-bindings/timer/adi,sc5xx-gptimer.yaml
F: drivers/clk/adi/
F: drivers/serial/serial_adi_uart4.c
F: drivers/timer/adi_sc5xx_timer.c
+F: include/configs/sc5*
F: include/env/adi/
ARM SNAPDRAGON
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7296012..348f48b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1871,9 +1871,15 @@
select ADI_SC5XX_TIMER
select DM
select DM_SERIAL
+ select HAS_CUSTOM_SYS_INIT_SP_ADDR
select PANIC_HANG
select SPL
+ select SPL_BOOTROM_SUPPORT
select SPL_DM
+ select SPL_DM_SEQ_ALIAS
+ select SPL_LIBGENERIC_SUPPORT
+ select SPL_LIBCOMMON_SUPPORT
+ select SPL_SKIP_LOWLEVEL_INIT
select SUPPORT_SPL
select TIMER
diff --git a/arch/arm/mach-sc5xx/Kconfig b/arch/arm/mach-sc5xx/Kconfig
index 2ec09db..4e587eb 100644
--- a/arch/arm/mach-sc5xx/Kconfig
+++ b/arch/arm/mach-sc5xx/Kconfig
@@ -13,6 +13,9 @@
if ARCH_SC5XX
+config SYS_VENDOR
+ default "adi"
+
choice
prompt "SC5xx SoC Select"
help
@@ -39,12 +42,33 @@
select ARM64
select COMMON_CLK_ADI_SC598
select GICV3
+ select GICV3_SUPPORT_GIC600
select GIC_600_CLEAR_RDPD
select MMC_SDHCI_ADMA_FORCE_32BIT
- select NOP_PHY
+ select NOP_PHY if PHY
+
+endchoice
+
+if SC59X_64
+
+choice
+ prompt "SC59x 64-bit board select"
+
+config TARGET_SC598_SOM_EZKIT
+ bool
+ prompt "SC598-SOM with SOMCRR-EZKIT"
+ select ADI_CARRIER_SOMCRR_EZKIT
endchoice
+endif
+
+config ADI_IMAGE
+ string "ADI fitImage type"
+ help
+ The image built by the ADI ADSP Linux build system.
+ Is one of tiny, minimal, full.
+
config SC_BOOT_MODE
int "SC5XX boot mode select"
default 1
@@ -84,10 +108,25 @@
This is the OSPI chip select number to use for booting, Y in the
expression `sf probe X:Y`
+config SYS_BOOTM_LEN
+ hex
+ default 0x1800000
+
config SYS_FLASH_BASE
hex
default 0x60000000
+config SYS_MALLOC_F_LEN
+ default 0x14000
+
+config SYS_LOAD_ADDR
+ hex
+ default 0x0
+
+config SYS_MALLOC_LEN
+ hex
+ default 1048576
+
config UART_CONSOLE
int
default 0
@@ -463,4 +502,6 @@
bool
default y
+source "board/adi/sc598-som-ezkit/Kconfig"
+
endif
diff --git a/arch/arm/mach-sc5xx/Makefile b/arch/arm/mach-sc5xx/Makefile
index eeb56c0..0955c50 100644
--- a/arch/arm/mach-sc5xx/Makefile
+++ b/arch/arm/mach-sc5xx/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_SC58X) += sc58x.o
obj-$(CONFIG_SC59X) += sc59x.o
obj-$(CONFIG_SC59X_64) += sc59x_64.o
+obj-$(CONFIG_SC59X_64) += sc59x_64-spl.o
obj-$(CONFIG_SPL_BUILD) += spl.o
obj-$(CONFIG_SYSCON) += rcu.o
diff --git a/arch/arm/mach-sc5xx/sc59x_64-spl.c b/arch/arm/mach-sc5xx/sc59x_64-spl.c
new file mode 100644
index 0000000..3992538
--- /dev/null
+++ b/arch/arm/mach-sc5xx/sc59x_64-spl.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <asm/arch-adi/sc5xx/spl.h>
+
+// Table 47-14 in SC598 hardware reference manual
+const struct adi_boot_args adi_rom_boot_args[] = {
+ // JTAG/no boot
+ [0] = {0, 0, 0},
+ // SPI master, used for qspi as well
+ [1] = {0x60040000, 0x00040000, 0x20620247},
+ // SPI slave
+ [2] = {0, 0, 0x00000212},
+ // UART slave
+ [3] = {0, 0, 0x00000013},
+ // Linkport slave
+ [4] = {0, 0, 0x00000014},
+ // OSPI master
+ [5] = {0x60040000, 0, 0x00000008},
+ // eMMC
+ [6] = {0x201, 0, 0x86009},
+ // reserved, also no boot
+ [7] = {0, 0, 0}
+};
diff --git a/arch/arm/mach-sc5xx/sc59x_64.c b/arch/arm/mach-sc5xx/sc59x_64.c
index 82537bf..001747f 100644
--- a/arch/arm/mach-sc5xx/sc59x_64.c
+++ b/arch/arm/mach-sc5xx/sc59x_64.c
@@ -9,6 +9,7 @@
*/
#include <asm/io.h>
+#include <asm/armv8/mmu.h>
#include <asm/arch-adi/sc5xx/sc5xx.h>
#include <asm/arch-adi/sc5xx/spl.h>
@@ -24,6 +25,30 @@
#define BITM_SCB5_SPI2_OSPI_REMAP_REMAP 0x00000003
#define ENUM_SCB5_SPI2_OSPI_REMAP_OSPI0 0x00000001
+static struct mm_region sc598_mem_map[] = {
+ {
+ /* Peripherals */
+ .virt = 0x0UL,
+ .phys = 0x0UL,
+ .size = 0x80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* DDR */
+ .virt = 0x80000000UL,
+ .phys = 0x80000000UL,
+ .size = 0x40000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = sc598_mem_map;
+
adi_rom_boot_fn adi_rom_boot = (adi_rom_boot_fn)0x000000e4;
void sc5xx_enable_rgmii(void)
diff --git a/arch/arm/mach-sc5xx/soc.c b/arch/arm/mach-sc5xx/soc.c
index 8f13127..f361920 100644
--- a/arch/arm/mach-sc5xx/soc.c
+++ b/arch/arm/mach-sc5xx/soc.c
@@ -172,6 +172,42 @@
phy_write(phydev, MDIO_DEVAD_NONE, 0, 0x3100);
}
+extern char __bss_start, __bss_end;
+extern char __rel_dyn_end;
+
+void bss_clear(void)
+{
+ char *bss_start = &__bss_start;
+ char *bss_end = &__bss_end;
+ char *rel_dyn_end = &__rel_dyn_end;
+
+ char *start;
+
+ if (rel_dyn_end >= bss_start && rel_dyn_end <= bss_end)
+ start = rel_dyn_end;
+ else
+ start = bss_start;
+
+ u32 *pt;
+ size_t sz = bss_end - start;
+
+ for (int i = 0; i < sz; i += 4) {
+ pt = (u32 *)(start + i);
+ *pt = 0;
+ }
+}
+
+int board_early_init_f(void)
+{
+ bss_clear();
+ return 0;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
int dram_init(void)
{
gd->ram_size = CFG_SYS_SDRAM_SIZE;
diff --git a/board/adi/sc598-som-ezkit/Kconfig b/board/adi/sc598-som-ezkit/Kconfig
new file mode 100644
index 0000000..9abecbe
--- /dev/null
+++ b/board/adi/sc598-som-ezkit/Kconfig
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2024 - Analog Devices, Inc.
+
+if TARGET_SC598_SOM_EZKIT
+
+config LDR_CPU
+ default "ADSP-SC598-0.0"
+
+config SYS_BOARD
+ default "sc598-som-ezkit"
+
+config SYS_CONFIG_NAME
+ default "sc598-som"
+
+config DEFAULT_DEVICE_TREE
+ default "sc598-som-ezkit"
+
+config ADI_IMAGE
+ default "minimal"
+
+config CUSTOM_SYS_INIT_SP_ADDR
+ default 0x96000000
+
+# SPL
+
+config SPL_OF_LIBFDT_ASSUME_MASK
+ default 0x0
+
+# SPI Flash
+
+config SF_DEFAULT_BUS
+ default 2
+
+config SF_DEFAULT_CS
+ default 1
+
+config SF_DEFAULT_SPEED
+ default 10000000
+
+# Clock Configs
+
+config CGU0_DF_DIV
+ default 0
+
+config CGU0_VCO_MULT
+ default 80
+
+config CGU0_CCLK_DIV
+ default 2
+
+config CGU0_SCLK_DIV
+ default 4
+
+config CGU0_SCLK0_DIV
+ default 4
+
+config CGU0_SCLK1_DIV
+ default 2
+
+config CGU0_DCLK_DIV
+ default 3
+
+config CGU0_OCLK_DIV
+ default 8
+
+config CGU0_DIV_S1SELEX
+ default 6
+
+config CGU1_VCO_MULT
+ default 72
+
+config CGU1_DF_DIV
+ default 0
+
+config CGU1_CCLK_DIV
+ default 16
+
+config CGU1_SCLK_DIV
+ default 8
+
+config CGU1_SCLK0_DIV
+ default 4
+
+config CGU1_SCLK1_DIV
+ default 2
+
+config CGU1_DCLK_DIV
+ default 18
+
+config CGU1_OCLK_DIV
+ default 16
+
+config CGU1_DIV_S0SELEX
+ default 36
+
+config CGU1_DIV_S1SELEX
+ default 90
+
+endif
diff --git a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
new file mode 100644
index 0000000..242436c
--- /dev/null
+++ b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later+ */
+
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <env/adi/adi_boot.env>
+
+adi_stage2_offset=0x40000
+adi_image_offset=0x01a0000
+adi_rfs_offset=0x1020000
+loadaddr=0x90000000
+jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezkit.jffs2
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index c08ff06..48775b0 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -86,6 +86,7 @@
default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0
default 0x10000 if ASPEED_AST2600
default 0x27000 if IMX8MM && SPL_TEXT_BASE = 0x7E1000
+ default 0x30000 if ARCH_SC5XX && SC59X_64
default 0x0
help
Maximum size of the SPL image (text, data, rodata, and linker lists
@@ -110,7 +111,7 @@
config SPL_HAS_BSS_LINKER_SECTION
depends on SPL_FRAMEWORK
bool "Use a specific address for the BSS via the linker script"
- default y if ARCH_SUNXI || ARCH_MX6 || ARCH_OMAP2PLUS || MIPS || RISCV || ARCH_ZYNQMP
+ default y if ARCH_SUNXI || ARCH_MX6 || ARCH_OMAP2PLUS || MIPS || RISCV || ARCH_ZYNQMP || ARCH_SC5XX
config SPL_BSS_START_ADDR
hex "Link address for the BSS within the SPL binary"
@@ -122,6 +123,7 @@
default 0x4ff80000 if ARCH_SUNXI && !(MACH_SUN9I || MACH_SUNIV)
default 0x2ff80000 if ARCH_SUNXI && MACH_SUN9I
default 0x1000 if ARCH_ZYNQMP
+ default 0x200B0000 if ARCH_SC5XX && SC59X_64
choice
prompt "Enforce SPL BSS limit"
@@ -150,6 +152,7 @@
depends on SPL_BSS_LIMIT
default 0x100000 if ARCH_MX6 || RISCV
default 0x80000 if ARCH_OMAP2PLUS || ARCH_SUNXI
+ default 0x10000 if ARCH_SC5XX
help
When non-zero, the linker checks that the actual memory used by SPL
from __bss_start to __bss_end does not exceed it.
@@ -268,6 +271,7 @@
default 0x20060 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2
default 0x00060 if ARCH_SUNXI
default 0xfffc0000 if ARCH_ZYNQMP
+ default 0x20080000 if ARCH_SC5XX
default 0x0
help
The address in memory that SPL will be running from.
@@ -369,7 +373,7 @@
config SPL_SHARES_INIT_SP_ADDR
bool "SPL and U-Boot use the same initial stack pointer location"
depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK
- default n if ARCH_SUNXI || ARCH_MX6 || ARCH_MX7
+ default n if ARCH_SUNXI || ARCH_MX6 || ARCH_MX7 || ARCH_SC5XX
default y
help
In many cases, we can use the same initial stack pointer address for
@@ -390,6 +394,7 @@
default 0x54000 if MACH_SUN50I || MACH_SUN50I_H5
default 0x18000 if MACH_SUN9I
default 0x8000 if ARCH_SUNXI
+ default 0x200E4000 if ARCH_SC5XX && SC59X_64
help
Address of the start of the stack SPL will use before SDRAM is
initialized.
@@ -1124,6 +1129,7 @@
hex "Address in memory to load 'args' file for Falcon Mode to"
depends on SPL_OS_BOOT || SPL_LOAD_FIT_OPENSBI_OS_BOOT
default 0x88000000 if ARCH_OMAP2PLUS
+ default 0x99000000 if ARCH_SC5XX && SC59X_64
help
Address in memory where the 'args' file, typically a device tree
will be loaded in to memory.
diff --git a/include/configs/sc598-som.h b/include/configs/sc598-som.h
new file mode 100644
index 0000000..964c694
--- /dev/null
+++ b/include/configs/sc598-som.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#ifndef __CONFIG_SC598_SOM_H
+#define __CONFIG_SC598_SOM_H
+
+/*
+ * Memory Settings
+ */
+#define MEM_IS43TR16512BL
+#define MEM_ISSI_4Gb_DDR3_800MHZ
+#define MEM_DMC0
+
+#define CFG_SYS_SDRAM_BASE 0x90000000
+#define CFG_SYS_SDRAM_SIZE 0x0e000000
+
+/* GIC */
+#define GICD_BASE 0x31200000
+#define GICR_BASE 0x31240000
+
+#endif