diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
new file mode 100644
index 0000000..856cb36
--- /dev/null
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -0,0 +1,692 @@
+/*
+ * Copyright 2004-2008 Freescale Semiconductor, Inc.
+ * Copyright 2009 Semihalf.
+ * (C) Copyright 2009 Stefan Roese <sr@denx.de>
+ *
+ * Based on original driver from Freescale Semiconductor
+ * written by John Rigby <jrigby@freescale.com> on basis
+ * of drivers/mtd/nand/mxc_nand.c. Reworked and extended
+ * Piotr Ziecik <kosmo@semihalf.com>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <malloc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/compat.h>
+
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <nand.h>
+
+#define DRV_NAME		"mpc5121_nfc"
+
+/* Timeouts */
+#define NFC_RESET_TIMEOUT	1000	/* 1 ms */
+#define NFC_TIMEOUT		2000	/* 2000 us */
+
+/* Addresses for NFC MAIN RAM BUFFER areas */
+#define NFC_MAIN_AREA(n)	((n) *  0x200)
+
+/* Addresses for NFC SPARE BUFFER areas */
+#define NFC_SPARE_BUFFERS	8
+#define NFC_SPARE_LEN		0x40
+#define NFC_SPARE_AREA(n)	(0x1000 + ((n) * NFC_SPARE_LEN))
+
+/* MPC5121 NFC registers */
+#define NFC_BUF_ADDR		0x1E04
+#define NFC_FLASH_ADDR		0x1E06
+#define NFC_FLASH_CMD		0x1E08
+#define NFC_CONFIG		0x1E0A
+#define NFC_ECC_STATUS1		0x1E0C
+#define NFC_ECC_STATUS2		0x1E0E
+#define NFC_SPAS		0x1E10
+#define NFC_WRPROT		0x1E12
+#define NFC_NF_WRPRST		0x1E18
+#define NFC_CONFIG1		0x1E1A
+#define NFC_CONFIG2		0x1E1C
+#define NFC_UNLOCKSTART_BLK0	0x1E20
+#define NFC_UNLOCKEND_BLK0	0x1E22
+#define NFC_UNLOCKSTART_BLK1	0x1E24
+#define NFC_UNLOCKEND_BLK1	0x1E26
+#define NFC_UNLOCKSTART_BLK2	0x1E28
+#define NFC_UNLOCKEND_BLK2	0x1E2A
+#define NFC_UNLOCKSTART_BLK3	0x1E2C
+#define NFC_UNLOCKEND_BLK3	0x1E2E
+
+/* Bit Definitions: NFC_BUF_ADDR */
+#define NFC_RBA_MASK		(7 << 0)
+#define NFC_ACTIVE_CS_SHIFT	5
+#define NFC_ACTIVE_CS_MASK	(3 << NFC_ACTIVE_CS_SHIFT)
+
+/* Bit Definitions: NFC_CONFIG */
+#define NFC_BLS_UNLOCKED	(1 << 1)
+
+/* Bit Definitions: NFC_CONFIG1 */
+#define NFC_ECC_4BIT		(1 << 0)
+#define NFC_FULL_PAGE_DMA	(1 << 1)
+#define NFC_SPARE_ONLY		(1 << 2)
+#define NFC_ECC_ENABLE		(1 << 3)
+#define NFC_INT_MASK		(1 << 4)
+#define NFC_BIG_ENDIAN		(1 << 5)
+#define NFC_RESET		(1 << 6)
+#define NFC_CE			(1 << 7)
+#define NFC_ONE_CYCLE		(1 << 8)
+#define NFC_PPB_32		(0 << 9)
+#define NFC_PPB_64		(1 << 9)
+#define NFC_PPB_128		(2 << 9)
+#define NFC_PPB_256		(3 << 9)
+#define NFC_PPB_MASK		(3 << 9)
+#define NFC_FULL_PAGE_INT	(1 << 11)
+
+/* Bit Definitions: NFC_CONFIG2 */
+#define NFC_COMMAND		(1 << 0)
+#define NFC_ADDRESS		(1 << 1)
+#define NFC_INPUT		(1 << 2)
+#define NFC_OUTPUT		(1 << 3)
+#define NFC_ID			(1 << 4)
+#define NFC_STATUS		(1 << 5)
+#define NFC_CMD_FAIL		(1 << 15)
+#define NFC_INT			(1 << 15)
+
+/* Bit Definitions: NFC_WRPROT */
+#define NFC_WPC_LOCK_TIGHT	(1 << 0)
+#define NFC_WPC_LOCK		(1 << 1)
+#define NFC_WPC_UNLOCK		(1 << 2)
+
+struct mpc5121_nfc_prv {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+	int irq;
+	void __iomem *regs;
+	struct clk *clk;
+	uint column;
+	int spareonly;
+	int chipsel;
+};
+
+int mpc5121_nfc_chip = 0;
+
+static void mpc5121_nfc_done(struct mtd_info *mtd);
+
+/* Read NFC register */
+static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mpc5121_nfc_prv *prv = chip->priv;
+
+	return in_be16(prv->regs + reg);
+}
+
+/* Write NFC register */
+static inline void nfc_write(struct mtd_info *mtd, uint reg, u16 val)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mpc5121_nfc_prv *prv = chip->priv;
+
+	out_be16(prv->regs + reg, val);
+}
+
+/* Set bits in NFC register */
+static inline void nfc_set(struct mtd_info *mtd, uint reg, u16 bits)
+{
+	nfc_write(mtd, reg, nfc_read(mtd, reg) | bits);
+}
+
+/* Clear bits in NFC register */
+static inline void nfc_clear(struct mtd_info *mtd, uint reg, u16 bits)
+{
+	nfc_write(mtd, reg, nfc_read(mtd, reg) & ~bits);
+}
+
+/* Invoke address cycle */
+static inline void mpc5121_nfc_send_addr(struct mtd_info *mtd, u16 addr)
+{
+	nfc_write(mtd, NFC_FLASH_ADDR, addr);
+	nfc_write(mtd, NFC_CONFIG2, NFC_ADDRESS);
+	mpc5121_nfc_done(mtd);
+}
+
+/* Invoke command cycle */
+static inline void mpc5121_nfc_send_cmd(struct mtd_info *mtd, u16 cmd)
+{
+	nfc_write(mtd, NFC_FLASH_CMD, cmd);
+	nfc_write(mtd, NFC_CONFIG2, NFC_COMMAND);
+	mpc5121_nfc_done(mtd);
+}
+
+/* Send data from NFC buffers to NAND flash */
+static inline void mpc5121_nfc_send_prog_page(struct mtd_info *mtd)
+{
+	nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+	nfc_write(mtd, NFC_CONFIG2, NFC_INPUT);
+	mpc5121_nfc_done(mtd);
+}
+
+/* Receive data from NAND flash */
+static inline void mpc5121_nfc_send_read_page(struct mtd_info *mtd)
+{
+	nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+	nfc_write(mtd, NFC_CONFIG2, NFC_OUTPUT);
+	mpc5121_nfc_done(mtd);
+}
+
+/* Receive ID from NAND flash */
+static inline void mpc5121_nfc_send_read_id(struct mtd_info *mtd)
+{
+	nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+	nfc_write(mtd, NFC_CONFIG2, NFC_ID);
+	mpc5121_nfc_done(mtd);
+}
+
+/* Receive status from NAND flash */
+static inline void mpc5121_nfc_send_read_status(struct mtd_info *mtd)
+{
+	nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+	nfc_write(mtd, NFC_CONFIG2, NFC_STATUS);
+	mpc5121_nfc_done(mtd);
+}
+
+static void mpc5121_nfc_done(struct mtd_info *mtd)
+{
+	int max_retries = NFC_TIMEOUT;
+
+	while (1) {
+		max_retries--;
+		if (nfc_read(mtd, NFC_CONFIG2) & NFC_INT)
+			break;
+		udelay(1);
+	}
+
+	if (max_retries <= 0)
+		printk(KERN_WARNING DRV_NAME
+		       ": Timeout while waiting for completion.\n");
+}
+
+/* Do address cycle(s) */
+static void mpc5121_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
+{
+	struct nand_chip *chip = mtd->priv;
+	u32 pagemask = chip->pagemask;
+
+	if (column != -1) {
+		mpc5121_nfc_send_addr(mtd, column);
+		if (mtd->writesize > 512)
+			mpc5121_nfc_send_addr(mtd, column >> 8);
+	}
+
+	if (page != -1) {
+		do {
+			mpc5121_nfc_send_addr(mtd, page & 0xFF);
+			page >>= 8;
+			pagemask >>= 8;
+		} while (pagemask);
+	}
+}
+
+/* Control chip select signals */
+
+/*
+ * Selecting the active device:
+ *
+ * This is different than the linux version. Switching between chips
+ * is done via board_nand_select_device(). The Linux select_chip
+ * function used here in U-Boot has only 2 valid chip numbers:
+ * 	0 select
+ * 	-1 deselect
+ */
+
+/*
+ * Implement it as a weak default, so that boards with a specific
+ * chip-select routine can use their own function.
+ */
+void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+	if (chip < 0) {
+		nfc_clear(mtd, NFC_CONFIG1, NFC_CE);
+		return;
+	}
+
+	nfc_clear(mtd, NFC_BUF_ADDR, NFC_ACTIVE_CS_MASK);
+	nfc_set(mtd, NFC_BUF_ADDR, (chip << NFC_ACTIVE_CS_SHIFT) &
+		NFC_ACTIVE_CS_MASK);
+	nfc_set(mtd, NFC_CONFIG1, NFC_CE);
+}
+void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
+	__attribute__((weak, alias("__mpc5121_nfc_select_chip")));
+
+void board_nand_select_device(struct nand_chip *nand, int chip)
+{
+	/*
+	 * Only save this chip number in global variable here. This
+	 * will be used later in mpc5121_nfc_select_chip().
+	 */
+	mpc5121_nfc_chip = chip;
+}
+
+/* Read NAND Ready/Busy signal */
+static int mpc5121_nfc_dev_ready(struct mtd_info *mtd)
+{
+	/*
+	 * NFC handles ready/busy signal internally. Therefore, this function
+	 * always returns status as ready.
+	 */
+	return 1;
+}
+
+/* Write command to NAND flash */
+static void mpc5121_nfc_command(struct mtd_info *mtd, unsigned command,
+				int column, int page)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mpc5121_nfc_prv *prv = chip->priv;
+
+	prv->column = (column >= 0) ? column : 0;
+	prv->spareonly = 0;
+
+	switch (command) {
+	case NAND_CMD_PAGEPROG:
+		mpc5121_nfc_send_prog_page(mtd);
+		break;
+		/*
+		 * NFC does not support sub-page reads and writes,
+		 * so emulate them using full page transfers.
+		 */
+	case NAND_CMD_READ0:
+		column = 0;
+		break;
+
+	case NAND_CMD_READ1:
+		prv->column += 256;
+		command = NAND_CMD_READ0;
+		column = 0;
+		break;
+
+	case NAND_CMD_READOOB:
+		prv->spareonly = 1;
+		command = NAND_CMD_READ0;
+		column = 0;
+		break;
+
+	case NAND_CMD_SEQIN:
+		mpc5121_nfc_command(mtd, NAND_CMD_READ0, column, page);
+		column = 0;
+		break;
+
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_READID:
+	case NAND_CMD_STATUS:
+		break;
+
+	default:
+		return;
+	}
+
+	mpc5121_nfc_send_cmd(mtd, command);
+	mpc5121_nfc_addr_cycle(mtd, column, page);
+
+	switch (command) {
+	case NAND_CMD_READ0:
+		if (mtd->writesize > 512)
+			mpc5121_nfc_send_cmd(mtd, NAND_CMD_READSTART);
+		mpc5121_nfc_send_read_page(mtd);
+		break;
+
+	case NAND_CMD_READID:
+		mpc5121_nfc_send_read_id(mtd);
+		break;
+
+	case NAND_CMD_STATUS:
+		mpc5121_nfc_send_read_status(mtd);
+		if (chip->options & NAND_BUSWIDTH_16)
+			prv->column = 1;
+		else
+			prv->column = 0;
+		break;
+	}
+}
+
+/* Copy data from/to NFC spare buffers. */
+static void mpc5121_nfc_copy_spare(struct mtd_info *mtd, uint offset,
+				   u8 * buffer, uint size, int wr)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct mpc5121_nfc_prv *prv = nand->priv;
+	uint o, s, sbsize, blksize;
+
+	/*
+	 * NAND spare area is available through NFC spare buffers.
+	 * The NFC divides spare area into (page_size / 512) chunks.
+	 * Each chunk is placed into separate spare memory area, using
+	 * first (spare_size / num_of_chunks) bytes of the buffer.
+	 *
+	 * For NAND device in which the spare area is not divided fully
+	 * by the number of chunks, number of used bytes in each spare
+	 * buffer is rounded down to the nearest even number of bytes,
+	 * and all remaining bytes are added to the last used spare area.
+	 *
+	 * For more information read section 26.6.10 of MPC5121e
+	 * Microcontroller Reference Manual, Rev. 3.
+	 */
+
+	/* Calculate number of valid bytes in each spare buffer */
+	sbsize = (mtd->oobsize / (mtd->writesize / 512)) & ~1;
+
+	while (size) {
+		/* Calculate spare buffer number */
+		s = offset / sbsize;
+		if (s > NFC_SPARE_BUFFERS - 1)
+			s = NFC_SPARE_BUFFERS - 1;
+
+		/*
+		 * Calculate offset to requested data block in selected spare
+		 * buffer and its size.
+		 */
+		o = offset - (s * sbsize);
+		blksize = min(sbsize - o, size);
+
+		if (wr)
+			memcpy_toio(prv->regs + NFC_SPARE_AREA(s) + o,
+				    buffer, blksize);
+		else
+			memcpy_fromio(buffer,
+				      prv->regs + NFC_SPARE_AREA(s) + o,
+				      blksize);
+
+		buffer += blksize;
+		offset += blksize;
+		size -= blksize;
+	};
+}
+
+/* Copy data from/to NFC main and spare buffers */
+static void mpc5121_nfc_buf_copy(struct mtd_info *mtd, u_char * buf, int len,
+				 int wr)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mpc5121_nfc_prv *prv = chip->priv;
+	uint c = prv->column;
+	uint l;
+
+	/* Handle spare area access */
+	if (prv->spareonly || c >= mtd->writesize) {
+		/* Calculate offset from beginning of spare area */
+		if (c >= mtd->writesize)
+			c -= mtd->writesize;
+
+		prv->column += len;
+		mpc5121_nfc_copy_spare(mtd, c, buf, len, wr);
+		return;
+	}
+
+	/*
+	 * Handle main area access - limit copy length to prevent
+	 * crossing main/spare boundary.
+	 */
+	l = min((uint) len, mtd->writesize - c);
+	prv->column += l;
+
+	if (wr)
+		memcpy_toio(prv->regs + NFC_MAIN_AREA(0) + c, buf, l);
+	else
+		memcpy_fromio(buf, prv->regs + NFC_MAIN_AREA(0) + c, l);
+
+	/* Handle crossing main/spare boundary */
+	if (l != len) {
+		buf += l;
+		len -= l;
+		mpc5121_nfc_buf_copy(mtd, buf, len, wr);
+	}
+}
+
+/* Read data from NFC buffers */
+static void mpc5121_nfc_read_buf(struct mtd_info *mtd, u_char * buf, int len)
+{
+	mpc5121_nfc_buf_copy(mtd, buf, len, 0);
+}
+
+/* Write data to NFC buffers */
+static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
+				  const u_char * buf, int len)
+{
+	mpc5121_nfc_buf_copy(mtd, (u_char *) buf, len, 1);
+}
+
+/* Compare buffer with NAND flash */
+static int mpc5121_nfc_verify_buf(struct mtd_info *mtd,
+				  const u_char * buf, int len)
+{
+	u_char tmp[256];
+	uint bsize;
+
+	while (len) {
+		bsize = min(len, 256);
+		mpc5121_nfc_read_buf(mtd, tmp, bsize);
+
+		if (memcmp(buf, tmp, bsize))
+			return 1;
+
+		buf += bsize;
+		len -= bsize;
+	}
+
+	return 0;
+}
+
+/* Read byte from NFC buffers */
+static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
+{
+	u8 tmp;
+
+	mpc5121_nfc_read_buf(mtd, &tmp, sizeof(tmp));
+
+	return tmp;
+}
+
+/* Read word from NFC buffers */
+static u16 mpc5121_nfc_read_word(struct mtd_info *mtd)
+{
+	u16 tmp;
+
+	mpc5121_nfc_read_buf(mtd, (u_char *) & tmp, sizeof(tmp));
+
+	return tmp;
+}
+
+/*
+ * Read NFC configuration from Reset Config Word
+ *
+ * NFC is configured during reset in basis of information stored
+ * in Reset Config Word. There is no other way to set NAND block
+ * size, spare size and bus width.
+ */
+static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
+{
+	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	struct nand_chip *chip = mtd->priv;
+	uint rcw_pagesize = 0;
+	uint rcw_sparesize = 0;
+	uint rcw_width;
+	uint rcwh;
+	uint romloc, ps;
+
+	rcwh = in_be32(&(im->reset.rcwh));
+
+	/* Bit 6: NFC bus width */
+	rcw_width = ((rcwh >> 6) & 0x1) ? 2 : 1;
+
+	/* Bit 7: NFC Page/Spare size */
+	ps = (rcwh >> 7) & 0x1;
+
+	/* Bits [22:21]: ROM Location */
+	romloc = (rcwh >> 21) & 0x3;
+
+	/* Decode RCW bits */
+	switch ((ps << 2) | romloc) {
+	case 0x00:
+	case 0x01:
+		rcw_pagesize = 512;
+		rcw_sparesize = 16;
+		break;
+	case 0x02:
+	case 0x03:
+		rcw_pagesize = 4096;
+		rcw_sparesize = 128;
+		break;
+	case 0x04:
+	case 0x05:
+		rcw_pagesize = 2048;
+		rcw_sparesize = 64;
+		break;
+	case 0x06:
+	case 0x07:
+		rcw_pagesize = 4096;
+		rcw_sparesize = 218;
+		break;
+	}
+
+	mtd->writesize = rcw_pagesize;
+	mtd->oobsize = rcw_sparesize;
+	if (rcw_width == 2)
+		chip->options |= NAND_BUSWIDTH_16;
+
+	debug(KERN_NOTICE DRV_NAME ": Configured for "
+	      "%u-bit NAND, page size %u with %u spare.\n",
+	      rcw_width * 8, rcw_pagesize, rcw_sparesize);
+	return 0;
+}
+
+int board_nand_init(struct nand_chip *chip)
+{
+	struct mpc5121_nfc_prv *prv;
+	struct mtd_info *mtd;
+	int resettime = 0;
+	int retval = 0;
+	int rev;
+	static int chip_nr = 0;
+
+	/*
+	 * Check SoC revision. This driver supports only NFC
+	 * in MPC5121 revision 2.
+	 */
+	rev = (mfspr(SPRN_SVR) >> 4) & 0xF;
+	if (rev != 2) {
+		printk(KERN_ERR DRV_NAME
+		       ": SoC revision %u is not supported!\n", rev);
+		return -ENXIO;
+	}
+
+	prv = malloc(sizeof(*prv));
+	if (!prv) {
+		printk(KERN_ERR DRV_NAME ": Memory exhausted!\n");
+		return -ENOMEM;
+	}
+
+	mtd = &nand_info[chip_nr++];
+	mtd->priv = chip;
+	chip->priv = prv;
+
+	/* Read NFC configuration from Reset Config Word */
+	retval = mpc5121_nfc_read_hw_config(mtd);
+	if (retval) {
+		printk(KERN_ERR DRV_NAME ": Unable to read NFC config!\n");
+		return retval;
+	}
+
+	prv->regs = (void __iomem *)CONFIG_SYS_NAND_BASE;
+	chip->dev_ready = mpc5121_nfc_dev_ready;
+	chip->cmdfunc = mpc5121_nfc_command;
+	chip->read_byte = mpc5121_nfc_read_byte;
+	chip->read_word = mpc5121_nfc_read_word;
+	chip->read_buf = mpc5121_nfc_read_buf;
+	chip->write_buf = mpc5121_nfc_write_buf;
+	chip->verify_buf = mpc5121_nfc_verify_buf;
+	chip->select_chip = mpc5121_nfc_select_chip;
+	chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+	chip->ecc.mode = NAND_ECC_SOFT;
+
+	/* Reset NAND Flash controller */
+	nfc_set(mtd, NFC_CONFIG1, NFC_RESET);
+	while (nfc_read(mtd, NFC_CONFIG1) & NFC_RESET) {
+		if (resettime++ >= NFC_RESET_TIMEOUT) {
+			printk(KERN_ERR DRV_NAME
+			       ": Timeout while resetting NFC!\n");
+			retval = -EINVAL;
+			goto error;
+		}
+
+		udelay(1);
+	}
+
+	/* Enable write to NFC memory */
+	nfc_write(mtd, NFC_CONFIG, NFC_BLS_UNLOCKED);
+
+	/* Enable write to all NAND pages */
+	nfc_write(mtd, NFC_UNLOCKSTART_BLK0, 0x0000);
+	nfc_write(mtd, NFC_UNLOCKEND_BLK0, 0xFFFF);
+	nfc_write(mtd, NFC_WRPROT, NFC_WPC_UNLOCK);
+
+	/*
+	 * Setup NFC:
+	 *      - Big Endian transfers,
+	 *      - Interrupt after full page read/write.
+	 */
+	nfc_write(mtd, NFC_CONFIG1, NFC_BIG_ENDIAN | NFC_INT_MASK |
+		  NFC_FULL_PAGE_INT);
+
+	/* Set spare area size */
+	nfc_write(mtd, NFC_SPAS, mtd->oobsize >> 1);
+
+	/* Detect NAND chips */
+	if (nand_scan(mtd, 1)) {
+		printk(KERN_ERR DRV_NAME ": NAND Flash not found !\n");
+		retval = -ENXIO;
+		goto error;
+	}
+
+	/* Set erase block size */
+	switch (mtd->erasesize / mtd->writesize) {
+	case 32:
+		nfc_set(mtd, NFC_CONFIG1, NFC_PPB_32);
+		break;
+
+	case 64:
+		nfc_set(mtd, NFC_CONFIG1, NFC_PPB_64);
+		break;
+
+	case 128:
+		nfc_set(mtd, NFC_CONFIG1, NFC_PPB_128);
+		break;
+
+	case 256:
+		nfc_set(mtd, NFC_CONFIG1, NFC_PPB_256);
+		break;
+
+	default:
+		printk(KERN_ERR DRV_NAME ": Unsupported NAND flash!\n");
+		retval = -ENXIO;
+		goto error;
+	}
+
+	return 0;
+error:
+	return retval;
+}