Kconfig: Drop CONFIG_CMD_DS4510_INFO
This option is only used in one driver and two boards. It does not seem
worth having the ability to remove this part of the support.
Drop the option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
diff --git a/README b/README
index 121d44a..d31cca1 100644
--- a/README
+++ b/README
@@ -831,7 +831,6 @@
CONFIG_CMD_DHCP * DHCP support
CONFIG_CMD_DIAG * Diagnostics
CONFIG_CMD_DS4510 * ds4510 I2C gpio commands
- CONFIG_CMD_DS4510_INFO * ds4510 I2C info command
CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd
CONFIG_CMD_DS4510_RST * ds4510 I2C rst command
CONFIG_CMD_DTT * Digital Therm and Thermostat
diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c
index d7c9bd7..940e2ce 100644
--- a/drivers/misc/ds4510.c
+++ b/drivers/misc/ds4510.c
@@ -186,7 +186,6 @@
}
#ifdef CONFIG_CMD_DS4510
-#ifdef CONFIG_CMD_DS4510_INFO
/*
* Display DS4510 information
*/
@@ -240,7 +239,6 @@
return 0;
}
-#endif /* CONFIG_CMD_DS4510_INFO */
cmd_tbl_t cmd_ds4510[] = {
U_BOOT_CMD_MKENT(device, 3, 0, (void *)DS4510_CMD_DEVICE, "", ""),
@@ -248,9 +246,7 @@
U_BOOT_CMD_MKENT(output, 4, 0, (void *)DS4510_CMD_OUTPUT, "", ""),
U_BOOT_CMD_MKENT(input, 3, 0, (void *)DS4510_CMD_INPUT, "", ""),
U_BOOT_CMD_MKENT(pullup, 4, 0, (void *)DS4510_CMD_PULLUP, "", ""),
-#ifdef CONFIG_CMD_DS4510_INFO
U_BOOT_CMD_MKENT(info, 2, 0, (void *)DS4510_CMD_INFO, "", ""),
-#endif
#ifdef CONFIG_CMD_DS4510_RST
U_BOOT_CMD_MKENT(rstdelay, 3, 0, (void *)DS4510_CMD_RSTDELAY, "", ""),
#endif
@@ -324,10 +320,8 @@
else
tmp &= ~(1 << ul_arg2);
return ds4510_pullup_write(chip, tmp);
-#ifdef CONFIG_CMD_DS4510_INFO
case DS4510_CMD_INFO:
return ds4510_info(chip);
-#endif
#ifdef CONFIG_CMD_DS4510_RST
case DS4510_CMD_RSTDELAY:
return ds4510_rstdelay_write(chip, ul_arg2);
@@ -378,10 +372,8 @@
"ds4510 eeprom/seeprom/sram/gpio access",
"device [dev]\n"
" - show or set current device address\n"
-#ifdef CONFIG_CMD_DS4510_INFO
"ds4510 info\n"
" - display ds4510 info\n"
-#endif
"ds4510 output pin 0|1\n"
" - set pin low or high-Z\n"
"ds4510 input pin\n"
diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 447fd95..dae61b1 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -503,7 +503,6 @@
* Command configuration.
*/
#define CONFIG_CMD_DS4510
-#define CONFIG_CMD_DS4510_INFO
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_IRQ
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 48f07b0..ce1ff86 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -355,7 +355,6 @@
* Command configuration.
*/
#define CONFIG_CMD_DS4510
-#define CONFIG_CMD_DS4510_INFO
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_JFFS2
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 4ed76f3..726e59b 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -384,7 +384,6 @@
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
CONFIG_CMD_DS4510
-CONFIG_CMD_DS4510_INFO
CONFIG_CMD_DS4510_MEM
CONFIG_CMD_DS4510_RST
CONFIG_CMD_DTT