[ADS5121] Support for the ADS5121 board
The following MPC5121e subsystems are supported:
- low-level CPU init
- NOR Boot Flash (common CFI driver)
- DDR SDRAM
- FEC
- I2C
- Watchdog
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c
new file mode 100644
index 0000000..3be565a
--- /dev/null
+++ b/cpu/mpc512x/cpu.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * (C) Copyright 2007 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code for the MPC512x family.
+ *
+ * Derived from the MPC83xx code.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc512x.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkcpu (void)
+{
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ ulong clock = gd->cpu_clk;
+ u32 pvr = get_pvr ();
+ u32 spridr = immr->sysconf.spridr;
+ char buf[32];
+
+ puts("CPU: ");
+
+ switch (spridr & 0xffff0000) {
+ case SPR_5121E:
+ puts ("MPC5121e ");
+ break;
+ default:
+ printf ("Unknown part ID %08x ", spridr & 0xffff0000);
+ }
+ printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr));
+
+ switch (pvr & 0xffff0000) {
+ case PVR_E300C4:
+ puts ("e300c4 ");
+ break;
+ default:
+ puts ("unknown ");
+ }
+ printf ("at %s MHz, CSB at %3d MHz\n", strmhz(buf, clock),
+ gd->csb_clk / 1000000);
+ return 0;
+}
+
+
+int
+do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ ulong msr;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+ /* Interrupts and MMU off */
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+ msr &= ~( MSR_EE | MSR_IR | MSR_DR);
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+
+ /*
+ * Enable Reset Control Reg - "RSTE" is the magic word that let us go
+ */
+ immap->reset.rpr = 0x52535445;
+
+ /* Verify Reset Control Reg is enabled */
+ while (!((immap->reset.rcer) & RCER_CRE))
+ ;
+
+ printf ("Resetting the board.\n");
+ udelay(200);
+
+ /* Perform reset */
+ immap->reset.rcr = RCR_SWHR;
+
+ /* Unreached... */
+ return 1;
+}
+
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ */
+unsigned long get_tbclk (void)
+{
+ ulong tbclk;
+
+ tbclk = (gd->bus_clk + 3L) / 4L;
+
+ return tbclk;
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+ int re_enable = disable_interrupts ();
+
+ /* Reset watchdog */
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ immr->wdt.swsrr = 0x556c;
+ immr->wdt.swsrr = 0xaa39;
+
+ if (re_enable)
+ enable_interrupts ();
+}
+#endif