cros-ec-keyboard: Synchronize DT binding from linux

The ChromeOS EC keyboard is used by various different chromebooks. Peach
pi being the third board in the u-boot tree to use it (snow and peach
pit the other two). Rather then embedding the same big DT node in the
peach-pi DT again, copy the dtsi snippit & bindings documentation from
linux and include it in all 3 boards.

This slightly changes the dt bindings in u-boot:
  * google,key-rows becomes keypad,num-rows
  * google,key-colums becomes keypad,num-colums
  * google,repeat-delay-ms and google,repeat-rate-ms are no longer used
    and replaced by hardcoded values (similar to tegra kbc)

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts
index fde863d..d1d8735 100644
--- a/arch/arm/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/dts/exynos5420-peach-pit.dts
@@ -28,61 +28,6 @@
 		pmic = "/i2c@12ca0000";
 	};
 
-	cros-ec-keyb {
-		compatible = "google,cros-ec-keyb";
-		google,key-rows = <8>;
-		google,key-columns = <13>;
-		google,repeat-delay-ms = <240>;
-		google,repeat-rate-ms = <30>;
-		google,ghost-filter;
-		/*
-		 * Keymap entries take the form of 0xRRCCKKKK where
-		 * RR=Row CC=Column KKKK=Key Code
-		 * The values below are for a US keyboard layout and
-		 * are taken from the Linux driver. Note that the
-		 * 102ND key is not used for US keyboards.
-		 */
-		linux,keymap = <
-			/* CAPSLCK F1         B          F10     */
-			0x0001003a 0x0002003b 0x00030030 0x00040044
-			/* N       =          R_ALT      ESC     */
-			0x00060031 0x0008000d 0x000a0064 0x01010001
-			/* F4      G          F7         H       */
-			0x0102003e 0x01030022 0x01040041 0x01060023
-			/* '       F9         BKSPACE    L_CTRL  */
-			0x01080028 0x01090043 0x010b000e 0x0200001d
-			/* TAB     F3         T          F6      */
-			0x0201000f 0x0202003d 0x02030014 0x02040040
-			/* ]       Y          102ND      [       */
-			0x0205001b 0x02060015 0x02070056 0x0208001a
-			/* F8      GRAVE      F2         5       */
-			0x02090042 0x03010029 0x0302003c 0x03030006
-			/* F5      6          -          \       */
-			0x0304003f 0x03060007 0x0308000c 0x030b002b
-			/* R_CTRL  A          D          F       */
-			0x04000061 0x0401001e 0x04020020 0x04030021
-			/* S       K          J          ;       */
-			0x0404001f 0x04050025 0x04060024 0x04080027
-			/* L       ENTER      Z          C       */
-			0x04090026 0x040b001c 0x0501002c 0x0502002e
-			/* V       X          ,          M       */
-			0x0503002f 0x0504002d 0x05050033 0x05060032
-			/* L_SHIFT /          .          SPACE   */
-			0x0507002a 0x05080035 0x05090034 0x050B0039
-			/* 1       3          4          2       */
-			0x06010002 0x06020004 0x06030005 0x06040003
-			/* 8       7          0          9       */
-			0x06050009 0x06060008 0x0608000b 0x0609000a
-			/* L_ALT   DOWN       RIGHT      Q       */
-			0x060a0038 0x060b006c 0x060c006a 0x07010010
-			/* E       R          W          I       */
-			0x07020012 0x07030013 0x07040011 0x07050017
-			/* U       R_SHIFT    P          O       */
-			0x07060016 0x07070036 0x07080019 0x07090018
-			/* UP      LEFT    */
-			0x070b0067 0x070c0069>;
-	};
-
 	dmc {
 		mem-manuf = "samsung";
 		mem-type = "ddr3";
@@ -157,7 +102,7 @@
 	spi@12d40000 { /* spi2 */
 		spi-max-frequency = <4000000>;
 		spi-deactivate-delay = <200>;
-		cros-ec@0 {
+		cros_ec: cros-ec@0 {
 			reg = <0>;
 			compatible = "google,cros-ec";
 			spi-half-duplex;
@@ -211,3 +156,5 @@
 		samsung,dual-lcd-enabled = <0>;
 	};
 };
+
+#include "cros-ec-keyboard.dtsi"