board: phytec: imx93: Add phyCORE-i.MX 93 support for all SOM variants
The phyCORE-i.MX 93 is available in various variants (e.g. different ram
sizes, eMMC HS400 yes/no). Enable hardware introspection for the
imx93-phyboard-segin_defconfig, so that during startup the SOM module
variant can be detected, and the hardware can be configured accordingly.
The resulting SPL and u-boot binary shall able to boot each
phyCORE-i.MX 93 module variant on each carrier board. Finally rename
imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
its SOM scope.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
diff --git a/doc/board/phytec/imx93-phyboard-segin.rst b/doc/board/phytec/imx93-phycore.rst
similarity index 90%
rename from doc/board/phytec/imx93-phyboard-segin.rst
rename to doc/board/phytec/imx93-phycore.rst
index ce17fbe..bd110a3 100644
--- a/doc/board/phytec/imx93-phyboard-segin.rst
+++ b/doc/board/phytec/imx93-phycore.rst
@@ -1,9 +1,9 @@
.. SPDX-License-Identifier: GPL-2.0+
-phyBOARD-Segin-i.MX93
-=====================
+phyCORE-i.MX 93
+===============
-U-Boot for the phyBOARD-Segin-i.MX93.
+U-Boot for the phyCORE-i.MX 93.
Quick Start
-----------
@@ -51,7 +51,7 @@
.. code-block:: bash
- $ make imx93-phyboard-segin_defconfig
+ $ make imx93-phycore_defconfig
$ make
Burn the flash.bin to MicroSD card offset 32KB:
diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst
index 99848a9..fa30697 100644
--- a/doc/board/phytec/index.rst
+++ b/doc/board/phytec/index.rst
@@ -7,7 +7,7 @@
:maxdepth: 2
imx8mm-phygate-tauri-l
- imx93-phyboard-segin
+ imx93-phycore
phycore-am62x
phycore-am64x
phycore-imx8mm