drivers: i2c: mxc: Fix compiler error when using i2c dm mode
I2C dm mode enablemenet causes below compilation errors:
In file included from include/config.h:8:0,
from include/common.h:20:
include/config_fallbacks.h:51:4: error: #error "Cannot define
CONFIG_SYS_I2C when CONFIG_DM_I2C is used"
# error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used"
^~~~~
In file included from include/config.h:8:0,
from include/common.h:20:
include/config_fallbacks.h:51:4: error: #error "Cannot define
CONFIG_SYS_I2C when CONFIG_DM_I2C is used"
# error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used"
^~~~~
board/freescale/lx2160a/lx2160a.c: In function 'board_early_init_f':
board/freescale/lx2160a/lx2160a.c:108:2: warning: implicit declaration
of function 'i2c_early_init_f'; did you mean 'arch_early_init_r'?
[-Wimplicit-function-declaration]
i2c_early_init_f();
^~~~~~~~~~~~~~~~
arch_early_init_r
drivers/i2c/mxc_i2c.c: In function 'mxc_i2c_probe':
drivers/i2c/mxc_i2c.c:824:8: warning: implicit declaration of function
'enable_i2c_clk';
did you mean 'enable_irq_wake'? [-Wimplicit-function-declaration]
ret = enable_i2c_clk(1, bus->seq);
^~~~~~~~~~~~~~
enable_irq_wake
So fix these compilation errors.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index eb21c09..a83c70e 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -178,8 +178,10 @@
#elif defined(CONFIG_ARCH_LX2160A)
#define TZPC_BASE 0x02200000
#define TZPCDECPROT_0_SET_BASE (TZPC_BASE + 0x804)
+#if !defined(CONFIG_DM_I2C)
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_EARLY_INIT
+#endif
#define SRDS_MAX_LANES 8
#ifndef L1_CACHE_BYTES
#define L1_CACHE_SHIFT 6
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 23119cc..73b9807 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -558,6 +558,14 @@
return 0;
}
+int __enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
+{
+ return 1;
+}
+
+int enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
+ __attribute__((weak, alias("__enable_i2c_clk")));
+
#ifndef CONFIG_DM_I2C
/*
* Read data from I2C device
@@ -723,13 +731,6 @@
return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0);
}
-int __enable_i2c_clk(unsigned char enable, unsigned i2c_num)
-{
- return 1;
-}
-int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
- __attribute__((weak, alias("__enable_i2c_clk")));
-
void bus_i2c_init(int index, int speed, int unused,
int (*idle_bus_fn)(void *p), void *idle_bus_data)
{