| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * EFI_FILE_PROTOCOL |
| * |
| * Copyright (c) 2017 Rob Clark |
| */ |
| |
| #include <charset.h> |
| #include <efi_loader.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <mapmem.h> |
| #include <fs.h> |
| #include <part.h> |
| |
| /* GUID for file system information */ |
| const efi_guid_t efi_file_system_info_guid = EFI_FILE_SYSTEM_INFO_GUID; |
| |
| /* GUID to obtain the volume label */ |
| const efi_guid_t efi_system_volume_label_id = EFI_FILE_SYSTEM_VOLUME_LABEL_ID; |
| |
| struct file_system { |
| struct efi_simple_file_system_protocol base; |
| struct efi_device_path *dp; |
| struct blk_desc *desc; |
| int part; |
| }; |
| #define to_fs(x) container_of(x, struct file_system, base) |
| |
| struct file_handle { |
| struct efi_file_handle base; |
| struct file_system *fs; |
| loff_t offset; /* current file position/cursor */ |
| int isdir; |
| u64 open_mode; |
| |
| /* for reading a directory: */ |
| struct fs_dir_stream *dirs; |
| struct fs_dirent *dent; |
| |
| char path[0]; |
| }; |
| #define to_fh(x) container_of(x, struct file_handle, base) |
| |
| static const struct efi_file_handle efi_file_handle_protocol; |
| |
| static char *basename(struct file_handle *fh) |
| { |
| char *s = strrchr(fh->path, '/'); |
| if (s) |
| return s + 1; |
| return fh->path; |
| } |
| |
| static int set_blk_dev(struct file_handle *fh) |
| { |
| return fs_set_blk_dev_with_part(fh->fs->desc, fh->fs->part); |
| } |
| |
| /** |
| * is_dir() - check if file handle points to directory |
| * |
| * We assume that set_blk_dev(fh) has been called already. |
| * |
| * @fh: file handle |
| * Return: true if file handle points to a directory |
| */ |
| static int is_dir(struct file_handle *fh) |
| { |
| struct fs_dir_stream *dirs; |
| |
| dirs = fs_opendir(fh->path); |
| if (!dirs) |
| return 0; |
| |
| fs_closedir(dirs); |
| |
| return 1; |
| } |
| |
| /* |
| * Normalize a path which may include either back or fwd slashes, |
| * double slashes, . or .. entries in the path, etc. |
| */ |
| static int sanitize_path(char *path) |
| { |
| char *p; |
| |
| /* backslash to slash: */ |
| p = path; |
| while ((p = strchr(p, '\\'))) |
| *p++ = '/'; |
| |
| /* handle double-slashes: */ |
| p = path; |
| while ((p = strstr(p, "//"))) { |
| char *src = p + 1; |
| memmove(p, src, strlen(src) + 1); |
| } |
| |
| /* handle extra /.'s */ |
| p = path; |
| while ((p = strstr(p, "/."))) { |
| /* |
| * You'd be tempted to do this *after* handling ".."s |
| * below to avoid having to check if "/." is start of |
| * a "/..", but that won't have the correct results.. |
| * for example, "/foo/./../bar" would get resolved to |
| * "/foo/bar" if you did these two passes in the other |
| * order |
| */ |
| if (p[2] == '.') { |
| p += 2; |
| continue; |
| } |
| char *src = p + 2; |
| memmove(p, src, strlen(src) + 1); |
| } |
| |
| /* handle extra /..'s: */ |
| p = path; |
| while ((p = strstr(p, "/.."))) { |
| char *src = p + 3; |
| |
| p--; |
| |
| /* find beginning of previous path entry: */ |
| while (true) { |
| if (p < path) |
| return -1; |
| if (*p == '/') |
| break; |
| p--; |
| } |
| |
| memmove(p, src, strlen(src) + 1); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * efi_create_file() - create file or directory |
| * |
| * @fh: file handle |
| * @attributes: attributes for newly created file |
| * Returns: 0 for success |
| */ |
| static int efi_create_file(struct file_handle *fh, u64 attributes) |
| { |
| loff_t actwrite; |
| void *buffer = &actwrite; |
| |
| if (attributes & EFI_FILE_DIRECTORY) |
| return fs_mkdir(fh->path); |
| else |
| return fs_write(fh->path, map_to_sysmem(buffer), 0, 0, |
| &actwrite); |
| } |
| |
| /** |
| * file_open() - open a file handle |
| * |
| * @fs: file system |
| * @parent: directory relative to which the file is to be opened |
| * @file_name: path of the file to be opened. '\', '.', or '..' may |
| * be used as modifiers. A leading backslash indicates an |
| * absolute path. |
| * @open_mode: bit mask indicating the access mode (read, write, |
| * create) |
| * @attributes: attributes for newly created file |
| * Returns: handle to the opened file or NULL |
| */ |
| static struct efi_file_handle *file_open(struct file_system *fs, |
| struct file_handle *parent, u16 *file_name, u64 open_mode, |
| u64 attributes) |
| { |
| struct file_handle *fh; |
| char f0[MAX_UTF8_PER_UTF16] = {0}; |
| int plen = 0; |
| int flen = 0; |
| |
| if (file_name) { |
| utf16_to_utf8((u8 *)f0, file_name, 1); |
| flen = u16_strlen(file_name); |
| } |
| |
| /* we could have a parent, but also an absolute path: */ |
| if (f0[0] == '\\') { |
| plen = 0; |
| } else if (parent) { |
| plen = strlen(parent->path) + 1; |
| } |
| |
| /* +2 is for null and '/' */ |
| fh = calloc(1, sizeof(*fh) + plen + (flen * MAX_UTF8_PER_UTF16) + 2); |
| if (!fh) |
| return NULL; |
| |
| fh->open_mode = open_mode; |
| fh->base = efi_file_handle_protocol; |
| fh->fs = fs; |
| |
| if (parent) { |
| char *p = fh->path; |
| int exists; |
| |
| if (plen > 0) { |
| strcpy(p, parent->path); |
| p += plen - 1; |
| *p++ = '/'; |
| } |
| |
| utf16_to_utf8((u8 *)p, file_name, flen); |
| |
| if (sanitize_path(fh->path)) |
| goto error; |
| |
| /* check if file exists: */ |
| if (set_blk_dev(fh)) |
| goto error; |
| |
| exists = fs_exists(fh->path); |
| /* fs_exists() calls fs_close(), so open file system again */ |
| if (set_blk_dev(fh)) |
| goto error; |
| |
| if (!exists) { |
| if (!(open_mode & EFI_FILE_MODE_CREATE) || |
| efi_create_file(fh, attributes)) |
| goto error; |
| if (set_blk_dev(fh)) |
| goto error; |
| } |
| |
| /* figure out if file is a directory: */ |
| fh->isdir = is_dir(fh); |
| } else { |
| fh->isdir = 1; |
| strcpy(fh->path, ""); |
| } |
| |
| return &fh->base; |
| |
| error: |
| free(fh); |
| return NULL; |
| } |
| |
| efi_status_t efi_file_open_int(struct efi_file_handle *this, |
| struct efi_file_handle **new_handle, |
| u16 *file_name, u64 open_mode, |
| u64 attributes) |
| { |
| struct file_handle *fh = to_fh(this); |
| efi_status_t ret; |
| |
| /* Check parameters */ |
| if (!this || !new_handle || !file_name) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| if (open_mode != EFI_FILE_MODE_READ && |
| open_mode != (EFI_FILE_MODE_READ | EFI_FILE_MODE_WRITE) && |
| open_mode != (EFI_FILE_MODE_READ | EFI_FILE_MODE_WRITE | |
| EFI_FILE_MODE_CREATE)) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| /* |
| * The UEFI spec requires that attributes are only set in create mode. |
| * The SCT does not care about this and sets EFI_FILE_DIRECTORY in |
| * read mode. EDK2 does not check that attributes are zero if not in |
| * create mode. |
| * |
| * So here we only check attributes in create mode and do not check |
| * that they are zero otherwise. |
| */ |
| if ((open_mode & EFI_FILE_MODE_CREATE) && |
| (attributes & (EFI_FILE_READ_ONLY | ~EFI_FILE_VALID_ATTR))) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| /* Open file */ |
| *new_handle = file_open(fh->fs, fh, file_name, open_mode, attributes); |
| if (*new_handle) { |
| EFI_PRINT("file handle %p\n", *new_handle); |
| ret = EFI_SUCCESS; |
| } else { |
| ret = EFI_NOT_FOUND; |
| } |
| out: |
| return ret; |
| } |
| |
| /** |
| * efi_file_open() - open file synchronously |
| * |
| * This function implements the Open service of the File Protocol. |
| * See the UEFI spec for details. |
| * |
| * @this: EFI_FILE_PROTOCOL instance |
| * @new_handle: on return pointer to file handle |
| * @file_name: file name |
| * @open_mode: mode to open the file (read, read/write, create/read/write) |
| * @attributes: attributes for newly created file |
| */ |
| static efi_status_t EFIAPI efi_file_open(struct efi_file_handle *this, |
| struct efi_file_handle **new_handle, |
| u16 *file_name, u64 open_mode, |
| u64 attributes) |
| { |
| efi_status_t ret; |
| |
| EFI_ENTRY("%p, %p, \"%ls\", %llx, %llu", this, new_handle, |
| file_name, open_mode, attributes); |
| |
| ret = efi_file_open_int(this, new_handle, file_name, open_mode, |
| attributes); |
| |
| return EFI_EXIT(ret); |
| } |
| |
| /** |
| * efi_file_open_ex() - open file asynchronously |
| * |
| * This function implements the OpenEx service of the File Protocol. |
| * See the UEFI spec for details. |
| * |
| * @this: EFI_FILE_PROTOCOL instance |
| * @new_handle: on return pointer to file handle |
| * @file_name: file name |
| * @open_mode: mode to open the file (read, read/write, create/read/write) |
| * @attributes: attributes for newly created file |
| * @token: transaction token |
| */ |
| static efi_status_t EFIAPI efi_file_open_ex(struct efi_file_handle *this, |
| struct efi_file_handle **new_handle, |
| u16 *file_name, u64 open_mode, |
| u64 attributes, |
| struct efi_file_io_token *token) |
| { |
| efi_status_t ret; |
| |
| EFI_ENTRY("%p, %p, \"%ls\", %llx, %llu, %p", this, new_handle, |
| file_name, open_mode, attributes, token); |
| |
| if (!token) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| ret = efi_file_open_int(this, new_handle, file_name, open_mode, |
| attributes); |
| |
| if (ret == EFI_SUCCESS && token->event) { |
| token->status = EFI_SUCCESS; |
| efi_signal_event(token->event); |
| } |
| |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| static efi_status_t file_close(struct file_handle *fh) |
| { |
| fs_closedir(fh->dirs); |
| free(fh); |
| return EFI_SUCCESS; |
| } |
| |
| efi_status_t efi_file_close_int(struct efi_file_handle *file) |
| { |
| struct file_handle *fh = to_fh(file); |
| |
| return file_close(fh); |
| } |
| |
| static efi_status_t EFIAPI efi_file_close(struct efi_file_handle *file) |
| { |
| EFI_ENTRY("%p", file); |
| return EFI_EXIT(efi_file_close_int(file)); |
| } |
| |
| static efi_status_t EFIAPI efi_file_delete(struct efi_file_handle *file) |
| { |
| struct file_handle *fh = to_fh(file); |
| efi_status_t ret = EFI_SUCCESS; |
| |
| EFI_ENTRY("%p", file); |
| |
| if (set_blk_dev(fh) || fs_unlink(fh->path)) |
| ret = EFI_WARN_DELETE_FAILURE; |
| |
| file_close(fh); |
| return EFI_EXIT(ret); |
| } |
| |
| /** |
| * efi_get_file_size() - determine the size of a file |
| * |
| * @fh: file handle |
| * @file_size: pointer to receive file size |
| * Return: status code |
| */ |
| static efi_status_t efi_get_file_size(struct file_handle *fh, |
| loff_t *file_size) |
| { |
| if (set_blk_dev(fh)) |
| return EFI_DEVICE_ERROR; |
| |
| if (fs_size(fh->path, file_size)) |
| return EFI_DEVICE_ERROR; |
| |
| return EFI_SUCCESS; |
| } |
| |
| /** |
| * efi_file_size() - Get the size of a file using an EFI file handle |
| * |
| * @fh: EFI file handle |
| * @size: buffer to fill in the discovered size |
| * |
| * Return: size of the file |
| */ |
| efi_status_t efi_file_size(struct efi_file_handle *fh, efi_uintn_t *size) |
| { |
| struct efi_file_info *info = NULL; |
| efi_uintn_t bs = 0; |
| efi_status_t ret; |
| |
| *size = 0; |
| ret = EFI_CALL(fh->getinfo(fh, (efi_guid_t *)&efi_file_info_guid, &bs, |
| info)); |
| if (ret != EFI_BUFFER_TOO_SMALL) { |
| ret = EFI_DEVICE_ERROR; |
| goto out; |
| } |
| |
| info = malloc(bs); |
| if (!info) { |
| ret = EFI_OUT_OF_RESOURCES; |
| goto out; |
| } |
| ret = EFI_CALL(fh->getinfo(fh, (efi_guid_t *)&efi_file_info_guid, &bs, |
| info)); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| |
| *size = info->file_size; |
| |
| out: |
| free(info); |
| return ret; |
| } |
| |
| static efi_status_t file_read(struct file_handle *fh, u64 *buffer_size, |
| void *buffer) |
| { |
| loff_t actread; |
| efi_status_t ret; |
| loff_t file_size; |
| |
| if (!buffer) { |
| ret = EFI_INVALID_PARAMETER; |
| return ret; |
| } |
| |
| ret = efi_get_file_size(fh, &file_size); |
| if (ret != EFI_SUCCESS) |
| return ret; |
| if (file_size < fh->offset) { |
| ret = EFI_DEVICE_ERROR; |
| return ret; |
| } |
| |
| if (set_blk_dev(fh)) |
| return EFI_DEVICE_ERROR; |
| if (fs_read(fh->path, map_to_sysmem(buffer), fh->offset, |
| *buffer_size, &actread)) |
| return EFI_DEVICE_ERROR; |
| |
| *buffer_size = actread; |
| fh->offset += actread; |
| |
| return EFI_SUCCESS; |
| } |
| |
| static void rtc2efi(struct efi_time *time, struct rtc_time *tm) |
| { |
| memset(time, 0, sizeof(struct efi_time)); |
| time->year = tm->tm_year; |
| time->month = tm->tm_mon; |
| time->day = tm->tm_mday; |
| time->hour = tm->tm_hour; |
| time->minute = tm->tm_min; |
| time->second = tm->tm_sec; |
| } |
| |
| static efi_status_t dir_read(struct file_handle *fh, u64 *buffer_size, |
| void *buffer) |
| { |
| struct efi_file_info *info = buffer; |
| struct fs_dirent *dent; |
| u64 required_size; |
| u16 *dst; |
| |
| if (set_blk_dev(fh)) |
| return EFI_DEVICE_ERROR; |
| |
| if (!fh->dirs) { |
| assert(fh->offset == 0); |
| fh->dirs = fs_opendir(fh->path); |
| if (!fh->dirs) |
| return EFI_DEVICE_ERROR; |
| fh->dent = NULL; |
| } |
| |
| /* |
| * So this is a bit awkward. Since fs layer is stateful and we |
| * can't rewind an entry, in the EFI_BUFFER_TOO_SMALL case below |
| * we might have to return without consuming the dent.. so we |
| * have to stash it for next call. |
| */ |
| if (fh->dent) { |
| dent = fh->dent; |
| } else { |
| dent = fs_readdir(fh->dirs); |
| } |
| |
| if (!dent) { |
| /* no more files in directory */ |
| *buffer_size = 0; |
| return EFI_SUCCESS; |
| } |
| |
| /* check buffer size: */ |
| required_size = sizeof(*info) + |
| 2 * (utf8_utf16_strlen(dent->name) + 1); |
| if (*buffer_size < required_size) { |
| *buffer_size = required_size; |
| fh->dent = dent; |
| return EFI_BUFFER_TOO_SMALL; |
| } |
| if (!buffer) |
| return EFI_INVALID_PARAMETER; |
| fh->dent = NULL; |
| |
| *buffer_size = required_size; |
| memset(info, 0, required_size); |
| |
| info->size = required_size; |
| info->file_size = dent->size; |
| info->physical_size = dent->size; |
| info->attribute = dent->attr; |
| rtc2efi(&info->create_time, &dent->create_time); |
| rtc2efi(&info->modification_time, &dent->change_time); |
| rtc2efi(&info->last_access_time, &dent->access_time); |
| |
| if (dent->type == FS_DT_DIR) |
| info->attribute |= EFI_FILE_DIRECTORY; |
| |
| dst = info->file_name; |
| utf8_utf16_strcpy(&dst, dent->name); |
| |
| fh->offset++; |
| |
| return EFI_SUCCESS; |
| } |
| |
| efi_status_t efi_file_read_int(struct efi_file_handle *this, |
| efi_uintn_t *buffer_size, void *buffer) |
| { |
| struct file_handle *fh = to_fh(this); |
| efi_status_t ret = EFI_SUCCESS; |
| u64 bs; |
| |
| if (!this || !buffer_size) |
| return EFI_INVALID_PARAMETER; |
| |
| bs = *buffer_size; |
| if (fh->isdir) |
| ret = dir_read(fh, &bs, buffer); |
| else |
| ret = file_read(fh, &bs, buffer); |
| if (bs <= SIZE_MAX) |
| *buffer_size = bs; |
| else |
| *buffer_size = SIZE_MAX; |
| |
| return ret; |
| } |
| |
| /** |
| * efi_file_read() - read file |
| * |
| * This function implements the Read() service of the EFI_FILE_PROTOCOL. |
| * |
| * See the Unified Extensible Firmware Interface (UEFI) specification for |
| * details. |
| * |
| * @this: file protocol instance |
| * @buffer_size: number of bytes to read |
| * @buffer: read buffer |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_file_read(struct efi_file_handle *this, |
| efi_uintn_t *buffer_size, void *buffer) |
| { |
| efi_status_t ret; |
| |
| EFI_ENTRY("%p, %p, %p", this, buffer_size, buffer); |
| |
| ret = efi_file_read_int(this, buffer_size, buffer); |
| |
| return EFI_EXIT(ret); |
| } |
| |
| /** |
| * efi_file_read_ex() - read file asynchonously |
| * |
| * This function implements the ReadEx() service of the EFI_FILE_PROTOCOL. |
| * |
| * See the Unified Extensible Firmware Interface (UEFI) specification for |
| * details. |
| * |
| * @this: file protocol instance |
| * @token: transaction token |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_file_read_ex(struct efi_file_handle *this, |
| struct efi_file_io_token *token) |
| { |
| efi_status_t ret; |
| |
| EFI_ENTRY("%p, %p", this, token); |
| |
| if (!token) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| ret = efi_file_read_int(this, &token->buffer_size, token->buffer); |
| |
| if (ret == EFI_SUCCESS && token->event) { |
| token->status = EFI_SUCCESS; |
| efi_signal_event(token->event); |
| } |
| |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| static efi_status_t efi_file_write_int(struct efi_file_handle *this, |
| efi_uintn_t *buffer_size, void *buffer) |
| { |
| struct file_handle *fh = to_fh(this); |
| efi_status_t ret = EFI_SUCCESS; |
| loff_t actwrite; |
| |
| if (!this || !buffer_size || !buffer) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| if (fh->isdir) { |
| ret = EFI_UNSUPPORTED; |
| goto out; |
| } |
| if (!(fh->open_mode & EFI_FILE_MODE_WRITE)) { |
| ret = EFI_ACCESS_DENIED; |
| goto out; |
| } |
| |
| if (!*buffer_size) |
| goto out; |
| |
| if (set_blk_dev(fh)) { |
| ret = EFI_DEVICE_ERROR; |
| goto out; |
| } |
| if (fs_write(fh->path, map_to_sysmem(buffer), fh->offset, *buffer_size, |
| &actwrite)) { |
| ret = EFI_DEVICE_ERROR; |
| goto out; |
| } |
| *buffer_size = actwrite; |
| fh->offset += actwrite; |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * efi_file_write() - write to file |
| * |
| * This function implements the Write() service of the EFI_FILE_PROTOCOL. |
| * |
| * See the Unified Extensible Firmware Interface (UEFI) specification for |
| * details. |
| * |
| * @this: file protocol instance |
| * @buffer_size: number of bytes to write |
| * @buffer: buffer with the bytes to write |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_file_write(struct efi_file_handle *this, |
| efi_uintn_t *buffer_size, |
| void *buffer) |
| { |
| efi_status_t ret; |
| |
| EFI_ENTRY("%p, %p, %p", this, buffer_size, buffer); |
| |
| ret = efi_file_write_int(this, buffer_size, buffer); |
| |
| return EFI_EXIT(ret); |
| } |
| |
| /** |
| * efi_file_write_ex() - write to file |
| * |
| * This function implements the WriteEx() service of the EFI_FILE_PROTOCOL. |
| * |
| * See the Unified Extensible Firmware Interface (UEFI) specification for |
| * details. |
| * |
| * @this: file protocol instance |
| * @token: transaction token |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_file_write_ex(struct efi_file_handle *this, |
| struct efi_file_io_token *token) |
| { |
| efi_status_t ret; |
| |
| EFI_ENTRY("%p, %p", this, token); |
| |
| if (!token) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| ret = efi_file_write_int(this, &token->buffer_size, token->buffer); |
| |
| if (ret == EFI_SUCCESS && token->event) { |
| token->status = EFI_SUCCESS; |
| efi_signal_event(token->event); |
| } |
| |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| /** |
| * efi_file_getpos() - get current position in file |
| * |
| * This function implements the GetPosition service of the EFI file protocol. |
| * See the UEFI spec for details. |
| * |
| * @file: file handle |
| * @pos: pointer to file position |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_file_getpos(struct efi_file_handle *file, |
| u64 *pos) |
| { |
| efi_status_t ret = EFI_SUCCESS; |
| struct file_handle *fh = to_fh(file); |
| |
| EFI_ENTRY("%p, %p", file, pos); |
| |
| if (fh->isdir) { |
| ret = EFI_UNSUPPORTED; |
| goto out; |
| } |
| |
| *pos = fh->offset; |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| efi_status_t efi_file_setpos_int(struct efi_file_handle *file, u64 pos) |
| { |
| struct file_handle *fh = to_fh(file); |
| efi_status_t ret = EFI_SUCCESS; |
| |
| if (fh->isdir) { |
| if (pos != 0) { |
| ret = EFI_UNSUPPORTED; |
| goto error; |
| } |
| fs_closedir(fh->dirs); |
| fh->dirs = NULL; |
| } |
| |
| if (pos == ~0ULL) { |
| loff_t file_size; |
| |
| ret = efi_get_file_size(fh, &file_size); |
| if (ret != EFI_SUCCESS) |
| goto error; |
| pos = file_size; |
| } |
| |
| fh->offset = pos; |
| |
| error: |
| return ret; |
| } |
| |
| /** |
| * efi_file_setpos() - set current position in file |
| * |
| * This function implements the SetPosition service of the EFI file protocol. |
| * See the UEFI spec for details. |
| * |
| * @file: file handle |
| * @pos: new file position |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_file_setpos(struct efi_file_handle *file, |
| u64 pos) |
| { |
| efi_status_t ret = EFI_SUCCESS; |
| |
| EFI_ENTRY("%p, %llu", file, pos); |
| |
| ret = efi_file_setpos_int(file, pos); |
| |
| return EFI_EXIT(ret); |
| } |
| |
| static efi_status_t EFIAPI efi_file_getinfo(struct efi_file_handle *file, |
| const efi_guid_t *info_type, |
| efi_uintn_t *buffer_size, |
| void *buffer) |
| { |
| struct file_handle *fh = to_fh(file); |
| efi_status_t ret = EFI_SUCCESS; |
| u16 *dst; |
| |
| EFI_ENTRY("%p, %pUs, %p, %p", file, info_type, buffer_size, buffer); |
| |
| if (!file || !info_type || !buffer_size || |
| (*buffer_size && !buffer)) { |
| ret = EFI_INVALID_PARAMETER; |
| goto error; |
| } |
| |
| if (!guidcmp(info_type, &efi_file_info_guid)) { |
| struct efi_file_info *info = buffer; |
| char *filename = basename(fh); |
| unsigned int required_size; |
| loff_t file_size; |
| |
| /* check buffer size: */ |
| required_size = sizeof(*info) + |
| 2 * (utf8_utf16_strlen(filename) + 1); |
| if (*buffer_size < required_size) { |
| *buffer_size = required_size; |
| ret = EFI_BUFFER_TOO_SMALL; |
| goto error; |
| } |
| |
| ret = efi_get_file_size(fh, &file_size); |
| if (ret != EFI_SUCCESS) { |
| if (!fh->isdir) |
| goto error; |
| /* |
| * Some file drivers don't implement fs_size() for |
| * directories. Use a dummy non-zero value. |
| */ |
| file_size = 4096; |
| ret = EFI_SUCCESS; |
| } |
| |
| memset(info, 0, required_size); |
| |
| info->size = required_size; |
| info->file_size = file_size; |
| info->physical_size = file_size; |
| |
| if (fh->isdir) |
| info->attribute |= EFI_FILE_DIRECTORY; |
| |
| dst = info->file_name; |
| utf8_utf16_strcpy(&dst, filename); |
| } else if (!guidcmp(info_type, &efi_file_system_info_guid)) { |
| struct efi_file_system_info *info = buffer; |
| struct disk_partition part; |
| efi_uintn_t required_size; |
| int r; |
| |
| if (fh->fs->part >= 1) |
| r = part_get_info(fh->fs->desc, fh->fs->part, &part); |
| else |
| r = part_get_info_whole_disk(fh->fs->desc, &part); |
| if (r < 0) { |
| ret = EFI_DEVICE_ERROR; |
| goto error; |
| } |
| required_size = sizeof(*info) + 2; |
| if (*buffer_size < required_size) { |
| *buffer_size = required_size; |
| ret = EFI_BUFFER_TOO_SMALL; |
| goto error; |
| } |
| |
| memset(info, 0, required_size); |
| |
| info->size = required_size; |
| /* |
| * TODO: We cannot determine if the volume can be written to. |
| */ |
| info->read_only = false; |
| info->volume_size = part.size * part.blksz; |
| /* |
| * TODO: We currently have no function to determine the free |
| * space. The volume size is the best upper bound we have. |
| */ |
| info->free_space = info->volume_size; |
| info->block_size = part.blksz; |
| /* |
| * TODO: The volume label is not available in U-Boot. |
| */ |
| info->volume_label[0] = 0; |
| } else if (!guidcmp(info_type, &efi_system_volume_label_id)) { |
| if (*buffer_size < 2) { |
| *buffer_size = 2; |
| ret = EFI_BUFFER_TOO_SMALL; |
| goto error; |
| } |
| *(u16 *)buffer = 0; |
| } else { |
| ret = EFI_UNSUPPORTED; |
| } |
| |
| error: |
| return EFI_EXIT(ret); |
| } |
| |
| static efi_status_t EFIAPI efi_file_setinfo(struct efi_file_handle *file, |
| const efi_guid_t *info_type, |
| efi_uintn_t buffer_size, |
| void *buffer) |
| { |
| struct file_handle *fh = to_fh(file); |
| efi_status_t ret = EFI_UNSUPPORTED; |
| |
| EFI_ENTRY("%p, %pUs, %zu, %p", file, info_type, buffer_size, buffer); |
| |
| if (!guidcmp(info_type, &efi_file_info_guid)) { |
| struct efi_file_info *info = (struct efi_file_info *)buffer; |
| char *filename = basename(fh); |
| char *new_file_name, *pos; |
| loff_t file_size; |
| |
| /* The buffer will always contain a file name. */ |
| if (buffer_size < sizeof(struct efi_file_info) + 2 || |
| buffer_size < info->size) { |
| ret = EFI_BAD_BUFFER_SIZE; |
| goto out; |
| } |
| /* We cannot change the directory attribute */ |
| if (!fh->isdir != !(info->attribute & EFI_FILE_DIRECTORY)) { |
| ret = EFI_ACCESS_DENIED; |
| goto out; |
| } |
| /* Check for renaming */ |
| new_file_name = malloc(utf16_utf8_strlen(info->file_name) + 1); |
| if (!new_file_name) { |
| ret = EFI_OUT_OF_RESOURCES; |
| goto out; |
| } |
| pos = new_file_name; |
| utf16_utf8_strcpy(&pos, info->file_name); |
| if (strcmp(new_file_name, filename)) { |
| /* TODO: we do not support renaming */ |
| EFI_PRINT("Renaming not supported\n"); |
| free(new_file_name); |
| ret = EFI_ACCESS_DENIED; |
| goto out; |
| } |
| free(new_file_name); |
| /* Check for truncation */ |
| if (!fh->isdir) { |
| ret = efi_get_file_size(fh, &file_size); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| if (file_size != info->file_size) { |
| /* TODO: we do not support truncation */ |
| EFI_PRINT("Truncation not supported\n"); |
| ret = EFI_ACCESS_DENIED; |
| goto out; |
| } |
| } |
| /* |
| * We do not care for the other attributes |
| * TODO: Support read only |
| */ |
| ret = EFI_SUCCESS; |
| } else { |
| /* TODO: We do not support changing the volume label */ |
| ret = EFI_UNSUPPORTED; |
| } |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| /** |
| * efi_file_flush_int() - flush file |
| * |
| * This is the internal implementation of the Flush() and FlushEx() services of |
| * the EFI_FILE_PROTOCOL. |
| * |
| * @this: file protocol instance |
| * Return: status code |
| */ |
| static efi_status_t efi_file_flush_int(struct efi_file_handle *this) |
| { |
| struct file_handle *fh = to_fh(this); |
| |
| if (!this) |
| return EFI_INVALID_PARAMETER; |
| |
| if (!(fh->open_mode & EFI_FILE_MODE_WRITE)) |
| return EFI_ACCESS_DENIED; |
| |
| /* TODO: flush for file position after end of file */ |
| return EFI_SUCCESS; |
| } |
| |
| /** |
| * efi_file_flush() - flush file |
| * |
| * This function implements the Flush() service of the EFI_FILE_PROTOCOL. |
| * |
| * See the Unified Extensible Firmware Interface (UEFI) specification for |
| * details. |
| * |
| * @this: file protocol instance |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_file_flush(struct efi_file_handle *this) |
| { |
| efi_status_t ret; |
| |
| EFI_ENTRY("%p", this); |
| |
| ret = efi_file_flush_int(this); |
| |
| return EFI_EXIT(ret); |
| } |
| |
| /** |
| * efi_file_flush_ex() - flush file |
| * |
| * This function implements the FlushEx() service of the EFI_FILE_PROTOCOL. |
| * |
| * See the Unified Extensible Firmware Interface (UEFI) specification for |
| * details. |
| * |
| * @this: file protocol instance |
| * @token: transaction token |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_file_flush_ex(struct efi_file_handle *this, |
| struct efi_file_io_token *token) |
| { |
| efi_status_t ret; |
| |
| EFI_ENTRY("%p, %p", this, token); |
| |
| if (!token) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| ret = efi_file_flush_int(this); |
| |
| if (ret == EFI_SUCCESS && token->event) { |
| token->status = EFI_SUCCESS; |
| efi_signal_event(token->event); |
| } |
| |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| static const struct efi_file_handle efi_file_handle_protocol = { |
| .rev = EFI_FILE_PROTOCOL_REVISION2, |
| .open = efi_file_open, |
| .close = efi_file_close, |
| .delete = efi_file_delete, |
| .read = efi_file_read, |
| .write = efi_file_write, |
| .getpos = efi_file_getpos, |
| .setpos = efi_file_setpos, |
| .getinfo = efi_file_getinfo, |
| .setinfo = efi_file_setinfo, |
| .flush = efi_file_flush, |
| .open_ex = efi_file_open_ex, |
| .read_ex = efi_file_read_ex, |
| .write_ex = efi_file_write_ex, |
| .flush_ex = efi_file_flush_ex, |
| }; |
| |
| /** |
| * efi_file_from_path() - open file via device path |
| * |
| * The device path @fp consists of the device path of the handle with the |
| * simple file system protocol and one or more file path device path nodes. |
| * The concatenation of all file path names provides the total file path. |
| * |
| * The code starts at the first file path node and tries to open that file or |
| * directory. If there is a succeding file path node, the code opens it relative |
| * to this directory and continues iterating until reaching the last file path |
| * node. |
| * |
| * @fp: device path |
| * Return: EFI_FILE_PROTOCOL for the file or NULL |
| */ |
| struct efi_file_handle *efi_file_from_path(struct efi_device_path *fp) |
| { |
| struct efi_simple_file_system_protocol *v; |
| struct efi_file_handle *f; |
| efi_status_t ret; |
| |
| v = efi_fs_from_path(fp); |
| if (!v) |
| return NULL; |
| |
| EFI_CALL(ret = v->open_volume(v, &f)); |
| if (ret != EFI_SUCCESS) |
| return NULL; |
| |
| /* Skip over device-path nodes before the file path. */ |
| while (fp && !EFI_DP_TYPE(fp, MEDIA_DEVICE, FILE_PATH)) |
| fp = efi_dp_next(fp); |
| |
| /* |
| * Step through the nodes of the directory path until the actual file |
| * node is reached which is the final node in the device path. |
| */ |
| while (fp) { |
| struct efi_device_path_file_path *fdp = |
| container_of(fp, struct efi_device_path_file_path, dp); |
| struct efi_file_handle *f2; |
| u16 *filename; |
| size_t filename_sz; |
| |
| if (!EFI_DP_TYPE(fp, MEDIA_DEVICE, FILE_PATH)) { |
| printf("bad file path!\n"); |
| EFI_CALL(f->close(f)); |
| return NULL; |
| } |
| |
| /* |
| * UEFI specification requires pointers that are passed to |
| * protocol member functions to be aligned. So memcpy it |
| * unconditionally |
| */ |
| if (fdp->dp.length <= offsetof(struct efi_device_path_file_path, str)) |
| return NULL; |
| filename_sz = fdp->dp.length - |
| offsetof(struct efi_device_path_file_path, str); |
| filename = malloc(filename_sz); |
| if (!filename) |
| return NULL; |
| memcpy(filename, fdp->str, filename_sz); |
| EFI_CALL(ret = f->open(f, &f2, filename, |
| EFI_FILE_MODE_READ, 0)); |
| free(filename); |
| if (ret != EFI_SUCCESS) |
| return NULL; |
| |
| fp = efi_dp_next(fp); |
| |
| EFI_CALL(f->close(f)); |
| f = f2; |
| } |
| |
| return f; |
| } |
| |
| efi_status_t efi_open_volume_int(struct efi_simple_file_system_protocol *this, |
| struct efi_file_handle **root) |
| { |
| struct file_system *fs = to_fs(this); |
| |
| *root = file_open(fs, NULL, NULL, 0, 0); |
| |
| return EFI_SUCCESS; |
| } |
| |
| static efi_status_t EFIAPI |
| efi_open_volume(struct efi_simple_file_system_protocol *this, |
| struct efi_file_handle **root) |
| { |
| EFI_ENTRY("%p, %p", this, root); |
| |
| return EFI_EXIT(efi_open_volume_int(this, root)); |
| } |
| |
| efi_status_t |
| efi_create_simple_file_system(struct blk_desc *desc, int part, |
| struct efi_device_path *dp, |
| struct efi_simple_file_system_protocol **fsp) |
| { |
| struct file_system *fs; |
| |
| fs = calloc(1, sizeof(*fs)); |
| if (!fs) |
| return EFI_OUT_OF_RESOURCES; |
| fs->base.rev = EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_REVISION; |
| fs->base.open_volume = efi_open_volume; |
| fs->desc = desc; |
| fs->part = part; |
| fs->dp = dp; |
| *fsp = &fs->base; |
| |
| return EFI_SUCCESS; |
| } |