drivers/gpio/qcom_pmic_gpio.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Qualcomm generic pmic gpio driver
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
  */

 #include <dm.h>
 #include <dm/device-internal.h>
 #include <dm/lists.h>
 #include <dm/pinctrl.h>
 #include <log.h>
 #include <power/pmic.h>
 #include <spmi/spmi.h>
 #include <asm/io.h>
 #include <stdlib.h>
 #include <asm/gpio.h>
 #include <linux/bitops.h>

 /* Register offset for each gpio */
 #define REG_OFFSET(x)          ((x) * 0x100)

 /* Register maps */

 /* Type and subtype are shared for all PMIC peripherals */
 #define REG_TYPE               0x4
 #define REG_SUBTYPE            0x5

 /* GPIO peripheral type and subtype out_values */
 #define REG_TYPE_VAL		0x10
 #define REG_SUBTYPE_GPIO_4CH	0x1
 #define REG_SUBTYPE_GPIOC_4CH	0x5
 #define REG_SUBTYPE_GPIO_8CH	0x9
 #define REG_SUBTYPE_GPIOC_8CH	0xd
 #define REG_SUBTYPE_GPIO_LV	0x10
 #define REG_SUBTYPE_GPIO_MV	0x11
 #define REG_SUBTYPE_GPIO_LV_VIN2          0x12
 #define REG_SUBTYPE_GPIO_MV_VIN3          0x13

 #define REG_STATUS             0x08
 #define REG_STATUS_VAL_MASK    0x1

 /* MODE_CTL */
 #define REG_CTL		0x40
 #define REG_CTL_MODE_MASK       0x70
 #define REG_CTL_MODE_INPUT      0x00
 #define REG_CTL_MODE_INOUT      0x20
 #define REG_CTL_MODE_OUTPUT     0x10
 #define REG_CTL_OUTPUT_MASK     0x0F
 #define REG_CTL_LV_MV_MODE_MASK		0x3
 #define REG_CTL_LV_MV_MODE_INPUT	0x0
 #define REG_CTL_LV_MV_MODE_INOUT	0x2
 #define REG_CTL_LV_MV_MODE_OUTPUT	0x1

 #define REG_DIG_VIN_CTL        0x41
 #define REG_DIG_VIN_VIN0       0

 #define REG_DIG_PULL_CTL       0x42
 #define REG_DIG_PULL_NO_PU     0x5

 #define REG_LV_MV_OUTPUT_CTL	0x44
 #define REG_LV_MV_OUTPUT_CTL_MASK	0x80
 #define REG_LV_MV_OUTPUT_CTL_SHIFT	7

 #define REG_DIG_OUT_CTL        0x45
 #define REG_DIG_OUT_CTL_CMOS   (0x0 << 4)
 #define REG_DIG_OUT_CTL_DRIVE_L 0x1

 #define REG_EN_CTL             0x46
 #define REG_EN_CTL_ENABLE      (1 << 7)

 struct qcom_pmic_gpio_data {
 	uint32_t pid; /* Peripheral ID on SPMI bus */
 	bool     lv_mv_type; /* If subtype is GPIO_LV(0x10) or GPIO_MV(0x11) */
 	u32 pin_count;
 	struct udevice *pmic; /* Reference to pmic device for read/write */
 };

 /* dev can be the GPIO or pinctrl device */
 static int _qcom_gpio_set_direction(struct udevice *dev, u32 offset, bool input, int value)
 {
 	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
 	u32 gpio_base = plat->pid + REG_OFFSET(offset);
 	u32 reg_ctl_val;
 	int ret = 0;

 	/* Select the mode and output */
 	if (plat->lv_mv_type) {
 		if (input)
 			reg_ctl_val = REG_CTL_LV_MV_MODE_INPUT;
 		else
 			reg_ctl_val = REG_CTL_LV_MV_MODE_INOUT;
 	} else {
 		if (input)
 			reg_ctl_val = REG_CTL_MODE_INPUT;
 		else
 			reg_ctl_val = REG_CTL_MODE_INOUT | !!value;
 	}

 	ret = pmic_reg_write(plat->pmic, gpio_base + REG_CTL, reg_ctl_val);
 	if (ret < 0)
 		return ret;

 	if (plat->lv_mv_type && !input) {
 		ret = pmic_reg_write(plat->pmic,
 				     gpio_base + REG_LV_MV_OUTPUT_CTL,
 				     !!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
 		if (ret < 0)
 			return ret;
 	}

 	return 0;
 }

 static int qcom_gpio_set_direction(struct udevice *dev, unsigned int offset,
 				   bool input, int value)
 {
 	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
 	uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
 	int ret = 0;

 	/* Disable the GPIO */
 	ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
 			      REG_EN_CTL_ENABLE, 0);
 	if (ret < 0)
 		return ret;

 	_qcom_gpio_set_direction(dev, offset, input, value);

 	/* Set the right pull (no pull) */
 	ret = pmic_reg_write(plat->pmic, gpio_base + REG_DIG_PULL_CTL,
 			     REG_DIG_PULL_NO_PU);
 	if (ret < 0)
 		return ret;

 	/* Configure output pin drivers if needed */
 	if (!input) {
 		/* Select the VIN - VIN0, pin is input so it doesn't matter */
 		ret = pmic_reg_write(plat->pmic, gpio_base + REG_DIG_VIN_CTL,
 				     REG_DIG_VIN_VIN0);
 		if (ret < 0)
 			return ret;

 		/* Set the right dig out control */
 		ret = pmic_reg_write(plat->pmic, gpio_base + REG_DIG_OUT_CTL,
 				     REG_DIG_OUT_CTL_CMOS |
 				     REG_DIG_OUT_CTL_DRIVE_L);
 		if (ret < 0)
 			return ret;
 	}

 	/* Enable the GPIO */
 	return pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL, 0,
 			       REG_EN_CTL_ENABLE);
 }

 static int qcom_gpio_direction_input(struct udevice *dev, unsigned offset)
 {
 	return qcom_gpio_set_direction(dev, offset, true, 0);
 }

 static int qcom_gpio_direction_output(struct udevice *dev, unsigned offset,
 				      int value)
 {
 	return qcom_gpio_set_direction(dev, offset, false, value);
 }

 static int qcom_gpio_get_function(struct udevice *dev, unsigned offset)
 {
 	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
 	uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
 	int reg;

 	reg = pmic_reg_read(plat->pmic, gpio_base + REG_CTL);
 	if (reg < 0)
 		return reg;

 	if (plat->lv_mv_type) {
 		switch (reg & REG_CTL_LV_MV_MODE_MASK) {
 		case REG_CTL_LV_MV_MODE_INPUT:
 			return GPIOF_INPUT;
 		case REG_CTL_LV_MV_MODE_INOUT: /* Fallthrough */
 		case REG_CTL_LV_MV_MODE_OUTPUT:
 			return GPIOF_OUTPUT;
 		default:
 			return GPIOF_UNKNOWN;
 		}
 	} else {
 		switch (reg & REG_CTL_MODE_MASK) {
 		case REG_CTL_MODE_INPUT:
 			return GPIOF_INPUT;
 		case REG_CTL_MODE_INOUT: /* Fallthrough */
 		case REG_CTL_MODE_OUTPUT:
 			return GPIOF_OUTPUT;
 		default:
 			return GPIOF_UNKNOWN;
 		}
 	}
 }

 static int qcom_gpio_get_value(struct udevice *dev, unsigned offset)
 {
 	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
 	uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
 	int reg;

 	reg = pmic_reg_read(plat->pmic, gpio_base + REG_STATUS);
 	if (reg < 0)
 		return reg;

 	return !!(reg & REG_STATUS_VAL_MASK);
 }

 static int qcom_gpio_set_value(struct udevice *dev, unsigned offset,
 			       int value)
 {
 	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
 	uint32_t gpio_base = plat->pid + REG_OFFSET(offset);

 	/* Set the output value of the gpio */
 	if (plat->lv_mv_type)
 		return pmic_clrsetbits(dev->parent,
 				       gpio_base + REG_LV_MV_OUTPUT_CTL,
 				       REG_LV_MV_OUTPUT_CTL_MASK,
 				       !!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
 	else
 		return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
 				       REG_CTL_OUTPUT_MASK, !!value);
 }

 static int qcom_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
 			   struct ofnode_phandle_args *args)
 {
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);

 	if (args->args_count < 1)
 		return -EINVAL;

 	/* GPIOs in DT are 1-based */
 	desc->offset = args->args[0] - 1;
 	if (desc->offset >= uc_priv->gpio_count)
 		return -EINVAL;

 	if (args->args_count < 2)
 		return 0;

 	desc->flags = gpio_flags_xlate(args->args[1]);

 	return 0;
 }

 static const struct dm_gpio_ops qcom_gpio_ops = {
 	.direction_input	= qcom_gpio_direction_input,
 	.direction_output	= qcom_gpio_direction_output,
 	.get_value		= qcom_gpio_get_value,
 	.set_value		= qcom_gpio_set_value,
 	.get_function		= qcom_gpio_get_function,
 	.xlate			= qcom_gpio_xlate,
 };

 static int qcom_gpio_bind(struct udevice *dev)
 {

 	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
 	struct udevice *child;
 	struct driver *drv;
 	int ret;

 	drv = lists_driver_lookup_name("qcom_pmic_pinctrl");
 	if (!drv) {
 		log_warning("Cannot find driver '%s'\n", "qcom_pmic_pinctrl");
 		return -ENOENT;
 	}

 	/* Bind the GPIO driver as a child of the PMIC. */
 	ret = device_bind_with_driver_data(dev, drv,
 					   dev->name,
 					   0, dev_ofnode(dev), &child);
 	if (ret)
 		return log_msg_ret("bind", ret);

 	dev_set_plat(child, plat);

 	return 0;
 }

 static int qcom_gpio_probe(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
 	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
 	struct ofnode_phandle_args args;
 	int val, ret;
 	u64 pid;

 	plat->pmic = dev->parent;

 	pid = dev_read_addr(dev);
 	if (pid == FDT_ADDR_T_NONE)
 		return log_msg_ret("bad address", -EINVAL);

 	plat->pid = pid;

 	/* Do a sanity check */
 	val = pmic_reg_read(plat->pmic, plat->pid + REG_TYPE);
 	if (val != REG_TYPE_VAL)
 		return log_msg_ret("bad type", -ENXIO);

 	val = pmic_reg_read(plat->pmic, plat->pid + REG_SUBTYPE);
 	switch (val) {
 	case REG_SUBTYPE_GPIO_4CH:
 	case REG_SUBTYPE_GPIOC_4CH:
 		plat->lv_mv_type = false;
 		break;
 	case REG_SUBTYPE_GPIO_LV:
 	case REG_SUBTYPE_GPIO_MV:
 	case REG_SUBTYPE_GPIO_LV_VIN2:
 	case REG_SUBTYPE_GPIO_MV_VIN3:
 		plat->lv_mv_type = true;
 		break;
 	default:
 		return log_msg_ret("bad subtype", -ENXIO);
 	}

 	plat->lv_mv_type = val == REG_SUBTYPE_GPIO_LV ||
 			   val == REG_SUBTYPE_GPIO_MV;

 	/*
 	 * Parse basic GPIO count specified via the gpio-ranges property
 	 * as specified in upstream devicetrees
 	 */
 	ret = ofnode_parse_phandle_with_args(dev_ofnode(dev), "gpio-ranges",
 					     NULL, 3, 0, &args);
 	if (ret)
 		return log_msg_ret("gpio-ranges", ret);

 	plat->pin_count = args.args[2];

 	uc_priv->gpio_count = plat->pin_count;
 	uc_priv->bank_name = "pmic";

 	return 0;
 }

 static const struct udevice_id qcom_gpio_ids[] = {
 	{ .compatible = "qcom,pm8916-gpio" },
 	{ .compatible = "qcom,pm8994-gpio" },	/* 22 GPIO's */
 	{ .compatible = "qcom,pm8998-gpio" },
 	{ .compatible = "qcom,pms405-gpio" },
 	{ .compatible = "qcom,pm6125-gpio" },
 	{ .compatible = "qcom,pm8150-gpio" },
 	{ .compatible = "qcom,pm8550-gpio" },
 	{ }
 };

 U_BOOT_DRIVER(qcom_pmic_gpio) = {
 	.name	= "qcom_pmic_gpio",
 	.id	= UCLASS_GPIO,
 	.of_match = qcom_gpio_ids,
 	.bind	= qcom_gpio_bind,
 	.probe = qcom_gpio_probe,
 	.ops	= &qcom_gpio_ops,
 	.plat_auto = sizeof(struct qcom_pmic_gpio_data),
 	.flags = DM_FLAG_ALLOC_PDATA,
 };

 static const struct pinconf_param qcom_pmic_pinctrl_conf_params[] = {
 	{ "output-high", PIN_CONFIG_OUTPUT_ENABLE, 1 },
 	{ "output-low", PIN_CONFIG_OUTPUT, 0 },
 };

 static int qcom_pmic_pinctrl_get_pins_count(struct udevice *dev)
 {
 	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);

 	return plat->pin_count;
 }

 static const char *qcom_pmic_pinctrl_get_pin_name(struct udevice *dev, unsigned int selector)
 {
 	static char name[8];

 	/* DT indexes from 1 */
 	snprintf(name, sizeof(name), "gpio%u", selector + 1);

 	return name;
 }

 static int qcom_pmic_pinctrl_pinconf_set(struct udevice *dev, unsigned int selector,
 					 unsigned int param, unsigned int arg)
 {
 	/* We only support configuring the pin as an output, either low or high */
 	return _qcom_gpio_set_direction(dev, selector, false,
 					param == PIN_CONFIG_OUTPUT_ENABLE);
 }

 static const char *qcom_pmic_pinctrl_get_function_name(struct udevice *dev, unsigned int selector)
 {
 	if (!selector)
 		return "normal";
 	return NULL;
 }

 static int qcom_pmic_pinctrl_generic_get_functions_count(struct udevice *dev)
 {
 	return 1;
 }

 static int qcom_pmic_pinctrl_generic_pinmux_set_mux(struct udevice *dev, unsigned int selector,
 						    unsigned int func_selector)
 {
 	return 0;
 }

 struct pinctrl_ops qcom_pmic_pinctrl_ops = {
 	.get_pins_count = qcom_pmic_pinctrl_get_pins_count,
 	.get_pin_name = qcom_pmic_pinctrl_get_pin_name,
 	.set_state = pinctrl_generic_set_state,
 	.pinconf_num_params = ARRAY_SIZE(qcom_pmic_pinctrl_conf_params),
 	.pinconf_params = qcom_pmic_pinctrl_conf_params,
 	.pinconf_set = qcom_pmic_pinctrl_pinconf_set,
 	.get_function_name = qcom_pmic_pinctrl_get_function_name,
 	.get_functions_count = qcom_pmic_pinctrl_generic_get_functions_count,
 	.pinmux_set = qcom_pmic_pinctrl_generic_pinmux_set_mux,
 };

 U_BOOT_DRIVER(qcom_pmic_pinctrl) = {
 	.name	= "qcom_pmic_pinctrl",
 	.id	= UCLASS_PINCTRL,
 	.ops	= &qcom_pmic_pinctrl_ops,
 };
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Qualcomm generic pmic gpio driver
	*
	* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
	*/

	#include <dm.h>
	#include <dm/device-internal.h>
	#include <dm/lists.h>
	#include <dm/pinctrl.h>
	#include <log.h>
	#include <power/pmic.h>
	#include <spmi/spmi.h>
	#include <asm/io.h>
	#include <stdlib.h>
	#include <asm/gpio.h>
	#include <linux/bitops.h>

	/* Register offset for each gpio */
	#define REG_OFFSET(x) ((x) * 0x100)

	/* Register maps */

	/* Type and subtype are shared for all PMIC peripherals */
	#define REG_TYPE 0x4
	#define REG_SUBTYPE 0x5

	/* GPIO peripheral type and subtype out_values */
	#define REG_TYPE_VAL 0x10
	#define REG_SUBTYPE_GPIO_4CH 0x1
	#define REG_SUBTYPE_GPIOC_4CH 0x5
	#define REG_SUBTYPE_GPIO_8CH 0x9
	#define REG_SUBTYPE_GPIOC_8CH 0xd
	#define REG_SUBTYPE_GPIO_LV 0x10
	#define REG_SUBTYPE_GPIO_MV 0x11
	#define REG_SUBTYPE_GPIO_LV_VIN2 0x12
	#define REG_SUBTYPE_GPIO_MV_VIN3 0x13

	#define REG_STATUS 0x08
	#define REG_STATUS_VAL_MASK 0x1

	/* MODE_CTL */
	#define REG_CTL 0x40
	#define REG_CTL_MODE_MASK 0x70
	#define REG_CTL_MODE_INPUT 0x00
	#define REG_CTL_MODE_INOUT 0x20
	#define REG_CTL_MODE_OUTPUT 0x10
	#define REG_CTL_OUTPUT_MASK 0x0F
	#define REG_CTL_LV_MV_MODE_MASK 0x3
	#define REG_CTL_LV_MV_MODE_INPUT 0x0
	#define REG_CTL_LV_MV_MODE_INOUT 0x2
	#define REG_CTL_LV_MV_MODE_OUTPUT 0x1

	#define REG_DIG_VIN_CTL 0x41
	#define REG_DIG_VIN_VIN0 0

	#define REG_DIG_PULL_CTL 0x42
	#define REG_DIG_PULL_NO_PU 0x5

	#define REG_LV_MV_OUTPUT_CTL 0x44
	#define REG_LV_MV_OUTPUT_CTL_MASK 0x80
	#define REG_LV_MV_OUTPUT_CTL_SHIFT 7

	#define REG_DIG_OUT_CTL 0x45
	#define REG_DIG_OUT_CTL_CMOS (0x0 << 4)
	#define REG_DIG_OUT_CTL_DRIVE_L 0x1

	#define REG_EN_CTL 0x46
	#define REG_EN_CTL_ENABLE (1 << 7)

	struct qcom_pmic_gpio_data {
	uint32_t pid; /* Peripheral ID on SPMI bus */
	bool lv_mv_type; /* If subtype is GPIO_LV(0x10) or GPIO_MV(0x11) */
	u32 pin_count;
	struct udevice pmic; / Reference to pmic device for read/write */
	};

	/* dev can be the GPIO or pinctrl device */
	static int _qcom_gpio_set_direction(struct udevice *dev, u32 offset, bool input, int value)
	{
	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
	u32 gpio_base = plat->pid + REG_OFFSET(offset);
	u32 reg_ctl_val;
	int ret = 0;

	/* Select the mode and output */
	if (plat->lv_mv_type) {
	if (input)
	reg_ctl_val = REG_CTL_LV_MV_MODE_INPUT;
	else
	reg_ctl_val = REG_CTL_LV_MV_MODE_INOUT;
	} else {
	if (input)
	reg_ctl_val = REG_CTL_MODE_INPUT;
	else
	reg_ctl_val = REG_CTL_MODE_INOUT \| !!value;
	}

	ret = pmic_reg_write(plat->pmic, gpio_base + REG_CTL, reg_ctl_val);
	if (ret < 0)
	return ret;

	if (plat->lv_mv_type && !input) {
	ret = pmic_reg_write(plat->pmic,
	gpio_base + REG_LV_MV_OUTPUT_CTL,
	!!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
	if (ret < 0)
	return ret;
	}

	return 0;
	}

	static int qcom_gpio_set_direction(struct udevice *dev, unsigned int offset,
	bool input, int value)
	{
	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
	uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
	int ret = 0;

	/* Disable the GPIO */
	ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
	REG_EN_CTL_ENABLE, 0);
	if (ret < 0)
	return ret;

	_qcom_gpio_set_direction(dev, offset, input, value);

	/* Set the right pull (no pull) */
	ret = pmic_reg_write(plat->pmic, gpio_base + REG_DIG_PULL_CTL,
	REG_DIG_PULL_NO_PU);
	if (ret < 0)
	return ret;

	/* Configure output pin drivers if needed */
	if (!input) {
	/* Select the VIN - VIN0, pin is input so it doesn't matter */
	ret = pmic_reg_write(plat->pmic, gpio_base + REG_DIG_VIN_CTL,
	REG_DIG_VIN_VIN0);
	if (ret < 0)
	return ret;

	/* Set the right dig out control */
	ret = pmic_reg_write(plat->pmic, gpio_base + REG_DIG_OUT_CTL,
	REG_DIG_OUT_CTL_CMOS \|
	REG_DIG_OUT_CTL_DRIVE_L);
	if (ret < 0)
	return ret;
	}

	/* Enable the GPIO */
	return pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL, 0,
	REG_EN_CTL_ENABLE);
	}

	static int qcom_gpio_direction_input(struct udevice *dev, unsigned offset)
	{
	return qcom_gpio_set_direction(dev, offset, true, 0);
	}

	static int qcom_gpio_direction_output(struct udevice *dev, unsigned offset,
	int value)
	{
	return qcom_gpio_set_direction(dev, offset, false, value);
	}

	static int qcom_gpio_get_function(struct udevice *dev, unsigned offset)
	{
	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
	uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
	int reg;

	reg = pmic_reg_read(plat->pmic, gpio_base + REG_CTL);
	if (reg < 0)
	return reg;

	if (plat->lv_mv_type) {
	switch (reg & REG_CTL_LV_MV_MODE_MASK) {
	case REG_CTL_LV_MV_MODE_INPUT:
	return GPIOF_INPUT;
	case REG_CTL_LV_MV_MODE_INOUT: /* Fallthrough */
	case REG_CTL_LV_MV_MODE_OUTPUT:
	return GPIOF_OUTPUT;
	default:
	return GPIOF_UNKNOWN;
	}
	} else {
	switch (reg & REG_CTL_MODE_MASK) {
	case REG_CTL_MODE_INPUT:
	return GPIOF_INPUT;
	case REG_CTL_MODE_INOUT: /* Fallthrough */
	case REG_CTL_MODE_OUTPUT:
	return GPIOF_OUTPUT;
	default:
	return GPIOF_UNKNOWN;
	}
	}
	}

	static int qcom_gpio_get_value(struct udevice *dev, unsigned offset)
	{
	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
	uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
	int reg;

	reg = pmic_reg_read(plat->pmic, gpio_base + REG_STATUS);
	if (reg < 0)
	return reg;

	return !!(reg & REG_STATUS_VAL_MASK);
	}

	static int qcom_gpio_set_value(struct udevice *dev, unsigned offset,
	int value)
	{
	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
	uint32_t gpio_base = plat->pid + REG_OFFSET(offset);

	/* Set the output value of the gpio */
	if (plat->lv_mv_type)
	return pmic_clrsetbits(dev->parent,
	gpio_base + REG_LV_MV_OUTPUT_CTL,
	REG_LV_MV_OUTPUT_CTL_MASK,
	!!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
	else
	return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
	REG_CTL_OUTPUT_MASK, !!value);
	}

	static int qcom_gpio_xlate(struct udevice dev, struct gpio_desc desc,
	struct ofnode_phandle_args *args)
	{
	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);

	if (args->args_count < 1)
	return -EINVAL;

	/* GPIOs in DT are 1-based */
	desc->offset = args->args[0] - 1;
	if (desc->offset >= uc_priv->gpio_count)
	return -EINVAL;

	if (args->args_count < 2)
	return 0;

	desc->flags = gpio_flags_xlate(args->args[1]);

	return 0;
	}

	static const struct dm_gpio_ops qcom_gpio_ops = {
	.direction_input = qcom_gpio_direction_input,
	.direction_output = qcom_gpio_direction_output,
	.get_value = qcom_gpio_get_value,
	.set_value = qcom_gpio_set_value,
	.get_function = qcom_gpio_get_function,
	.xlate = qcom_gpio_xlate,
	};

	static int qcom_gpio_bind(struct udevice *dev)
	{

	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
	struct udevice *child;
	struct driver *drv;
	int ret;

	drv = lists_driver_lookup_name("qcom_pmic_pinctrl");
	if (!drv) {
	log_warning("Cannot find driver '%s'\n", "qcom_pmic_pinctrl");
	return -ENOENT;
	}

	/* Bind the GPIO driver as a child of the PMIC. */
	ret = device_bind_with_driver_data(dev, drv,
	dev->name,
	0, dev_ofnode(dev), &child);
	if (ret)
	return log_msg_ret("bind", ret);

	dev_set_plat(child, plat);

	return 0;
	}

	static int qcom_gpio_probe(struct udevice *dev)
	{
	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
	struct ofnode_phandle_args args;
	int val, ret;
	u64 pid;

	plat->pmic = dev->parent;

	pid = dev_read_addr(dev);
	if (pid == FDT_ADDR_T_NONE)
	return log_msg_ret("bad address", -EINVAL);

	plat->pid = pid;

	/* Do a sanity check */
	val = pmic_reg_read(plat->pmic, plat->pid + REG_TYPE);
	if (val != REG_TYPE_VAL)
	return log_msg_ret("bad type", -ENXIO);

	val = pmic_reg_read(plat->pmic, plat->pid + REG_SUBTYPE);
	switch (val) {
	case REG_SUBTYPE_GPIO_4CH:
	case REG_SUBTYPE_GPIOC_4CH:
	plat->lv_mv_type = false;
	break;
	case REG_SUBTYPE_GPIO_LV:
	case REG_SUBTYPE_GPIO_MV:
	case REG_SUBTYPE_GPIO_LV_VIN2:
	case REG_SUBTYPE_GPIO_MV_VIN3:
	plat->lv_mv_type = true;
	break;
	default:
	return log_msg_ret("bad subtype", -ENXIO);
	}

	plat->lv_mv_type = val == REG_SUBTYPE_GPIO_LV \|\|
	val == REG_SUBTYPE_GPIO_MV;

	/*
	* Parse basic GPIO count specified via the gpio-ranges property
	* as specified in upstream devicetrees
	*/
	ret = ofnode_parse_phandle_with_args(dev_ofnode(dev), "gpio-ranges",
	NULL, 3, 0, &args);
	if (ret)
	return log_msg_ret("gpio-ranges", ret);

	plat->pin_count = args.args[2];

	uc_priv->gpio_count = plat->pin_count;
	uc_priv->bank_name = "pmic";

	return 0;
	}

	static const struct udevice_id qcom_gpio_ids[] = {
	{ .compatible = "qcom,pm8916-gpio" },
	{ .compatible = "qcom,pm8994-gpio" }, /* 22 GPIO's */
	{ .compatible = "qcom,pm8998-gpio" },
	{ .compatible = "qcom,pms405-gpio" },
	{ .compatible = "qcom,pm6125-gpio" },
	{ .compatible = "qcom,pm8150-gpio" },
	{ .compatible = "qcom,pm8550-gpio" },
	{ }
	};

	U_BOOT_DRIVER(qcom_pmic_gpio) = {
	.name = "qcom_pmic_gpio",
	.id = UCLASS_GPIO,
	.of_match = qcom_gpio_ids,
	.bind = qcom_gpio_bind,
	.probe = qcom_gpio_probe,
	.ops = &qcom_gpio_ops,
	.plat_auto = sizeof(struct qcom_pmic_gpio_data),
	.flags = DM_FLAG_ALLOC_PDATA,
	};

	static const struct pinconf_param qcom_pmic_pinctrl_conf_params[] = {
	{ "output-high", PIN_CONFIG_OUTPUT_ENABLE, 1 },
	{ "output-low", PIN_CONFIG_OUTPUT, 0 },
	};

	static int qcom_pmic_pinctrl_get_pins_count(struct udevice *dev)
	{
	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);

	return plat->pin_count;
	}

	static const char qcom_pmic_pinctrl_get_pin_name(struct udevice dev, unsigned int selector)
	{
	static char name[8];

	/* DT indexes from 1 */
	snprintf(name, sizeof(name), "gpio%u", selector + 1);

	return name;
	}

	static int qcom_pmic_pinctrl_pinconf_set(struct udevice *dev, unsigned int selector,
	unsigned int param, unsigned int arg)
	{
	/* We only support configuring the pin as an output, either low or high */
	return _qcom_gpio_set_direction(dev, selector, false,
	param == PIN_CONFIG_OUTPUT_ENABLE);
	}

	static const char qcom_pmic_pinctrl_get_function_name(struct udevice dev, unsigned int selector)
	{
	if (!selector)
	return "normal";
	return NULL;
	}

	static int qcom_pmic_pinctrl_generic_get_functions_count(struct udevice *dev)
	{
	return 1;
	}

	static int qcom_pmic_pinctrl_generic_pinmux_set_mux(struct udevice *dev, unsigned int selector,
	unsigned int func_selector)
	{
	return 0;
	}

	struct pinctrl_ops qcom_pmic_pinctrl_ops = {
	.get_pins_count = qcom_pmic_pinctrl_get_pins_count,
	.get_pin_name = qcom_pmic_pinctrl_get_pin_name,
	.set_state = pinctrl_generic_set_state,
	.pinconf_num_params = ARRAY_SIZE(qcom_pmic_pinctrl_conf_params),
	.pinconf_params = qcom_pmic_pinctrl_conf_params,
	.pinconf_set = qcom_pmic_pinctrl_pinconf_set,
	.get_function_name = qcom_pmic_pinctrl_get_function_name,
	.get_functions_count = qcom_pmic_pinctrl_generic_get_functions_count,
	.pinmux_set = qcom_pmic_pinctrl_generic_pinmux_set_mux,
	};

	U_BOOT_DRIVER(qcom_pmic_pinctrl) = {
	.name = "qcom_pmic_pinctrl",
	.id = UCLASS_PINCTRL,
	.ops = &qcom_pmic_pinctrl_ops,
	};