mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND
Add more clarity by changing the Kconfig entry name.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 46b95c7..3d7f738 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -710,7 +710,7 @@
#endif
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
+#if defined(CONFIG_NOR) || defined(CONFIG_MTD_RAW_NAND)
gpmc_init();
#endif
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 6e1ede3..6fb2c00 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -195,7 +195,7 @@
{-1},
};
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
static struct module_pin_mux nand_pin_mux[] = {
{OFFSET(gpmc_ad0), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */
{OFFSET(gpmc_ad1), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */
@@ -360,7 +360,7 @@
/* Beaglebone pinmux */
configure_module_pin_mux(mii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
configure_module_pin_mux(nand_pin_mux);
#elif defined(CONFIG_NOR)
configure_module_pin_mux(bone_norcape_pin_mux);
@@ -376,7 +376,7 @@
if (profile & ~PROFILE_2)
configure_module_pin_mux(i2c1_pin_mux);
/* Profiles 2 & 3 don't have NAND */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
if (profile & ~(PROFILE_2 | PROFILE_3))
configure_module_pin_mux(nand_pin_mux);
#endif
@@ -404,7 +404,7 @@
}
/* Beaglebone LT pinmux */
configure_module_pin_mux(mmc0_pin_mux);
-#if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_MTD_RAW_NAND) && defined(CONFIG_EMMC_BOOT)
configure_module_pin_mux(nand_pin_mux);
#elif defined(CONFIG_NOR) && defined(CONFIG_EMMC_BOOT)
configure_module_pin_mux(bone_norcape_pin_mux);
diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c
index a61987e..f59e93a 100644
--- a/board/ti/am43xx/mux.c
+++ b/board/ti/am43xx/mux.c
@@ -73,7 +73,7 @@
{-1},
};
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
static struct module_pin_mux nand_pin_mux[] = {
{OFFSET(gpmc_ad0), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */
{OFFSET(gpmc_ad1), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */
@@ -128,18 +128,18 @@
if (board_is_evm()) {
configure_module_pin_mux(gpio5_7_pin_mux);
configure_module_pin_mux(rgmii1_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
configure_module_pin_mux(nand_pin_mux);
#endif
} else if (board_is_sk() || board_is_idk()) {
configure_module_pin_mux(rgmii1_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
printf("Error: NAND flash not present on this board\n");
#endif
configure_module_pin_mux(qspi_pin_mux);
} else if (board_is_eposevm()) {
configure_module_pin_mux(rmii1_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
configure_module_pin_mux(nand_pin_mux);
#else
configure_module_pin_mux(qspi_pin_mux);
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 04e9b89..79b8363 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -784,7 +784,7 @@
early_padconf, ARRAY_SIZE(early_padconf));
}
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
static int nand_sw_detect(void)
{
int rc;
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
index 8f7b591..3896ebb 100644
--- a/board/ti/ti816x/evm.c
+++ b/board/ti/ti816x/evm.c
@@ -25,7 +25,7 @@
int board_init(void)
{
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
gpmc_init();
#endif
return 0;