| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2003 Stefan Roese, stefan.roese@esd-electronics.com |
| */ |
| |
| #include <command.h> |
| #include <malloc.h> |
| #include <vsprintf.h> |
| #include <asm/io.h> |
| #include <pci.h> |
| |
| #include <universe.h> |
| |
| #define PCI_VENDOR PCI_VENDOR_ID_TUNDRA |
| #define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_CA91C042 |
| |
| typedef struct _UNI_DEV UNI_DEV; |
| |
| struct _UNI_DEV { |
| int bus; |
| pci_dev_t busdevfn; |
| UNIVERSE *uregs; |
| unsigned int pci_bs; |
| }; |
| |
| static UNI_DEV *dev; |
| |
| int universe_init(void) |
| { |
| int j, result; |
| pci_dev_t busdevfn; |
| unsigned int val; |
| |
| busdevfn = pci_find_device(PCI_VENDOR, PCI_DEVICE, 0); |
| if (busdevfn == -1) { |
| puts("No Tundra Universe found!\n"); |
| return -1; |
| } |
| |
| /* Lets turn Latency off */ |
| pci_write_config_dword(busdevfn, 0x0c, 0); |
| |
| dev = malloc(sizeof(*dev)); |
| if (NULL == dev) { |
| puts("UNIVERSE: No memory!\n"); |
| result = -1; |
| goto break_20; |
| } |
| |
| memset(dev, 0, sizeof(*dev)); |
| dev->busdevfn = busdevfn; |
| |
| pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_1, &val); |
| if (val & 1) { |
| pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_0, &val); |
| } |
| val &= ~0xf; |
| dev->uregs = (UNIVERSE *)val; |
| |
| debug ("UNIVERSE-Base : %p\n", dev->uregs); |
| |
| /* check mapping */ |
| debug (" Read via mapping, PCI_ID = %08X\n", readl(&dev->uregs->pci_id)); |
| if (((PCI_DEVICE <<16) | PCI_VENDOR) != readl(&dev->uregs->pci_id)) { |
| printf ("UNIVERSE: Cannot read PCI-ID via Mapping: %08x\n", |
| readl(&dev->uregs->pci_id)); |
| result = -1; |
| goto break_30; |
| } |
| |
| debug ("PCI_BS = %08X\n", readl(&dev->uregs->pci_bs)); |
| |
| dev->pci_bs = readl(&dev->uregs->pci_bs); |
| |
| /* turn off windows */ |
| for (j=0; j <4; j ++) { |
| writel(0x00800000, &dev->uregs->lsi[j].ctl); |
| writel(0x00800000, &dev->uregs->vsi[j].ctl); |
| } |
| |
| /* |
| * Write to Misc Register |
| * Set VME Bus Time-out |
| * Arbitration Mode |
| * DTACK Enable |
| */ |
| writel(0x15040000 | (readl(&dev->uregs->misc_ctl) & 0x00020000), &dev->uregs->misc_ctl); |
| |
| if (readl(&dev->uregs->misc_ctl) & 0x00020000) { |
| debug ("System Controller!\n"); /* test-only */ |
| } else { |
| debug ("Not System Controller!\n"); /* test-only */ |
| } |
| |
| /* |
| * Lets turn off interrupts |
| */ |
| writel(0x00000000,&dev->uregs->lint_en); /* Disable interrupts in the Universe first */ |
| writel(0x0000FFFF,&dev->uregs->lint_stat); /* Clear Any Pending Interrupts */ |
| eieio(); |
| writel(0x0000, &dev->uregs->lint_map0); /* Map all ints to 0 */ |
| writel(0x0000, &dev->uregs->lint_map1); /* Map all ints to 0 */ |
| eieio(); |
| |
| return 0; |
| |
| break_30: |
| free(dev); |
| break_20: |
| return result; |
| } |
| |
| /* |
| * Create pci slave window (access: pci -> vme) |
| */ |
| int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int size, int vam, int pms, int vdw) |
| { |
| int result, i; |
| unsigned int ctl = 0; |
| |
| if (NULL == dev) { |
| result = -1; |
| goto exit_10; |
| } |
| |
| for (i = 0; i < 4; i++) { |
| if (0x00800000 == readl(&dev->uregs->lsi[i].ctl)) |
| break; |
| } |
| |
| if (i == 4) { |
| printf ("universe: No Image available\n"); |
| result = -1; |
| goto exit_10; |
| } |
| |
| debug ("universe: Using image %d\n", i); |
| |
| writel(pciAddr , &dev->uregs->lsi[i].bs); |
| writel((pciAddr + size), &dev->uregs->lsi[i].bd); |
| writel((vmeAddr - pciAddr), &dev->uregs->lsi[i].to); |
| |
| switch (vam & VME_AM_Axx) { |
| case VME_AM_A16: |
| ctl = 0x00000000; |
| break; |
| case VME_AM_A24: |
| ctl = 0x00010000; |
| break; |
| case VME_AM_A32: |
| ctl = 0x00020000; |
| break; |
| } |
| |
| switch (vam & VME_AM_Mxx) { |
| case VME_AM_DATA: |
| ctl |= 0x00000000; |
| break; |
| case VME_AM_PROG: |
| ctl |= 0x00008000; |
| break; |
| } |
| |
| if (vam & VME_AM_SUP) { |
| ctl |= 0x00001000; |
| |
| } |
| |
| switch (vdw & VME_FLAG_Dxx) { |
| case VME_FLAG_D8: |
| ctl |= 0x00000000; |
| break; |
| case VME_FLAG_D16: |
| ctl |= 0x00400000; |
| break; |
| case VME_FLAG_D32: |
| ctl |= 0x00800000; |
| break; |
| } |
| |
| switch (pms & PCI_MS_Mxx) { |
| case PCI_MS_MEM: |
| ctl |= 0x00000000; |
| break; |
| case PCI_MS_IO: |
| ctl |= 0x00000001; |
| break; |
| case PCI_MS_CONFIG: |
| ctl |= 0x00000002; |
| break; |
| } |
| |
| ctl |= 0x80000000; /* enable */ |
| |
| writel(ctl, &dev->uregs->lsi[i].ctl); |
| |
| debug ("universe: window-addr=%p\n", &dev->uregs->lsi[i].ctl); |
| debug ("universe: pci slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->lsi[i].ctl)); |
| debug ("universe: pci slave window[%d] bs=%08x\n", i, readl(&dev->uregs->lsi[i].bs)); |
| debug ("universe: pci slave window[%d] bd=%08x\n", i, readl(&dev->uregs->lsi[i].bd)); |
| debug ("universe: pci slave window[%d] to=%08x\n", i, readl(&dev->uregs->lsi[i].to)); |
| |
| return 0; |
| |
| exit_10: |
| return -result; |
| } |
| |
| /* |
| * Create vme slave window (access: vme -> pci) |
| */ |
| int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int size, int vam, int pms) |
| { |
| int result, i; |
| unsigned int ctl = 0; |
| |
| if (NULL == dev) { |
| result = -1; |
| goto exit_10; |
| } |
| |
| for (i = 0; i < 4; i++) { |
| if (0x00800000 == readl(&dev->uregs->vsi[i].ctl)) |
| break; |
| } |
| |
| if (i == 4) { |
| printf ("universe: No Image available\n"); |
| result = -1; |
| goto exit_10; |
| } |
| |
| debug ("universe: Using image %d\n", i); |
| |
| writel(vmeAddr , &dev->uregs->vsi[i].bs); |
| writel((vmeAddr + size), &dev->uregs->vsi[i].bd); |
| writel((pciAddr - vmeAddr), &dev->uregs->vsi[i].to); |
| |
| switch (vam & VME_AM_Axx) { |
| case VME_AM_A16: |
| ctl = 0x00000000; |
| break; |
| case VME_AM_A24: |
| ctl = 0x00010000; |
| break; |
| case VME_AM_A32: |
| ctl = 0x00020000; |
| break; |
| } |
| |
| switch (vam & VME_AM_Mxx) { |
| case VME_AM_DATA: |
| ctl |= 0x00000000; |
| break; |
| case VME_AM_PROG: |
| ctl |= 0x00800000; |
| break; |
| } |
| |
| if (vam & VME_AM_SUP) { |
| ctl |= 0x00100000; |
| |
| } |
| |
| switch (pms & PCI_MS_Mxx) { |
| case PCI_MS_MEM: |
| ctl |= 0x00000000; |
| break; |
| case PCI_MS_IO: |
| ctl |= 0x00000001; |
| break; |
| case PCI_MS_CONFIG: |
| ctl |= 0x00000002; |
| break; |
| } |
| |
| ctl |= 0x80f00000; /* enable */ |
| |
| writel(ctl, &dev->uregs->vsi[i].ctl); |
| |
| debug ("universe: window-addr=%p\n", &dev->uregs->vsi[i].ctl); |
| debug ("universe: vme slave window[%d] ctl=%08x\n", i, readl(&dev->uregs->vsi[i].ctl)); |
| debug ("universe: vme slave window[%d] bs=%08x\n", i, readl(&dev->uregs->vsi[i].bs)); |
| debug ("universe: vme slave window[%d] bd=%08x\n", i, readl(&dev->uregs->vsi[i].bd)); |
| debug ("universe: vme slave window[%d] to=%08x\n", i, readl(&dev->uregs->vsi[i].to)); |
| |
| return 0; |
| |
| exit_10: |
| return -result; |
| } |
| |
| /* |
| * Tundra Universe configuration |
| */ |
| int do_universe(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| ulong addr1 = 0, addr2 = 0, size = 0, vam = 0, pms = 0, vdw = 0; |
| char cmd = 'x'; |
| |
| /* get parameter */ |
| if (argc > 1) |
| cmd = argv[1][0]; |
| if (argc > 2) |
| addr1 = hextoul(argv[2], NULL); |
| if (argc > 3) |
| addr2 = hextoul(argv[3], NULL); |
| if (argc > 4) |
| size = hextoul(argv[4], NULL); |
| if (argc > 5) |
| vam = hextoul(argv[5], NULL); |
| if (argc > 6) |
| pms = hextoul(argv[6], NULL); |
| if (argc > 7) |
| vdw = hextoul(argv[7], NULL); |
| |
| switch (cmd) { |
| case 'i': /* init */ |
| universe_init(); |
| break; |
| case 'v': /* vme */ |
| printf("Configuring Universe VME Slave Window (VME->PCI):\n"); |
| printf(" vme=%08lx pci=%08lx size=%08lx vam=%02lx pms=%02lx\n", |
| addr1, addr2, size, vam, pms); |
| universe_vme_slave_window(addr1, addr2, size, vam, pms); |
| break; |
| case 'p': /* pci */ |
| printf("Configuring Universe PCI Slave Window (PCI->VME):\n"); |
| printf(" pci=%08lx vme=%08lx size=%08lx vam=%02lx pms=%02lx vdw=%02lx\n", |
| addr1, addr2, size, vam, pms, vdw); |
| universe_pci_slave_window(addr1, addr2, size, vam, pms, vdw); |
| break; |
| default: |
| printf("Universe command %s not supported!\n", argv[1]); |
| } |
| |
| return 0; |
| } |
| |
| U_BOOT_CMD( |
| universe, 8, 1, do_universe, |
| "initialize and configure Turndra Universe", |
| "init\n" |
| " - initialize universe\n" |
| "universe vme [vme_addr] [pci_addr] [size] [vam] [pms]\n" |
| " - create vme slave window (access: vme->pci)\n" |
| "universe pci [pci_addr] [vme_addr] [size] [vam] [pms] [vdw]\n" |
| " - create pci slave window (access: pci->vme)\n" |
| " [vam] = VMEbus Address-Modifier: 01 -> A16 Address Space\n" |
| " 02 -> A24 Address Space\n" |
| " 03 -> A32 Address Space\n" |
| " 04 -> Supervisor AM Code\n" |
| " 10 -> Data AM Code\n" |
| " 20 -> Program AM Code\n" |
| " [pms] = PCI Memory Space: 01 -> Memory Space\n" |
| " 02 -> I/O Space\n" |
| " 03 -> Configuration Space\n" |
| " [vdw] = VMEbus Maximum Datawidth: 01 -> D8 Data Width\n" |
| " 02 -> D16 Data Width\n" |
| " 03 -> D32 Data Width" |
| ); |