| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2000-2010 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2008 |
| * Guennadi Liakhovetski, DENX Software Engineering, lg@denx.de. |
| */ |
| |
| #define _GNU_SOURCE |
| |
| #include "fw_env_private.h" |
| |
| #include <compiler.h> |
| #include <env.h> |
| #include <errno.h> |
| #include <env_flags.h> |
| #include <fcntl.h> |
| #include <libgen.h> |
| #include <linux/fs.h> |
| #include <linux/stringify.h> |
| #include <ctype.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <stddef.h> |
| #include <string.h> |
| #include <sys/types.h> |
| #include <sys/ioctl.h> |
| #include <sys/stat.h> |
| #include <u-boot/crc.h> |
| #include <unistd.h> |
| #include <dirent.h> |
| |
| #ifdef MTD_OLD |
| # include <stdint.h> |
| # include <linux/mtd/mtd.h> |
| #else |
| # define __user /* nothing */ |
| # include <mtd/mtd-user.h> |
| #endif |
| |
| #include <mtd/ubi-user.h> |
| |
| #include "fw_env.h" |
| |
| struct env_opts default_opts = { |
| #ifdef CONFIG_FILE |
| .config_file = CONFIG_FILE |
| #endif |
| }; |
| |
| #define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) |
| |
| #define min(x, y) ({ \ |
| typeof(x) _min1 = (x); \ |
| typeof(y) _min2 = (y); \ |
| (void) (&_min1 == &_min2); \ |
| _min1 < _min2 ? _min1 : _min2; }) |
| |
| struct envdev_s { |
| const char *devname; /* Device name */ |
| long long devoff; /* Device offset */ |
| ulong env_size; /* environment size */ |
| ulong erase_size; /* device erase size */ |
| ulong env_sectors; /* number of environment sectors */ |
| uint8_t mtd_type; /* type of the MTD device */ |
| int is_ubi; /* set if we use UBI volume */ |
| }; |
| |
| static struct envdev_s envdevices[2] = { |
| { |
| .mtd_type = MTD_ABSENT, |
| }, { |
| .mtd_type = MTD_ABSENT, |
| }, |
| }; |
| |
| static int dev_current; |
| |
| #define DEVNAME(i) envdevices[(i)].devname |
| #define DEVOFFSET(i) envdevices[(i)].devoff |
| #define ENVSIZE(i) envdevices[(i)].env_size |
| #define DEVESIZE(i) envdevices[(i)].erase_size |
| #define ENVSECTORS(i) envdevices[(i)].env_sectors |
| #define DEVTYPE(i) envdevices[(i)].mtd_type |
| #define IS_UBI(i) envdevices[(i)].is_ubi |
| |
| #define CUR_ENVSIZE ENVSIZE(dev_current) |
| |
| static unsigned long usable_envsize; |
| #define ENV_SIZE usable_envsize |
| |
| struct env_image_single { |
| uint32_t crc; /* CRC32 over data bytes */ |
| char data[]; |
| }; |
| |
| struct env_image_redundant { |
| uint32_t crc; /* CRC32 over data bytes */ |
| unsigned char flags; /* active or obsolete */ |
| char data[]; |
| }; |
| |
| enum flag_scheme { |
| FLAG_NONE, |
| FLAG_BOOLEAN, |
| FLAG_INCREMENTAL, |
| }; |
| |
| struct environment { |
| void *image; |
| uint32_t *crc; |
| unsigned char *flags; |
| char *data; |
| enum flag_scheme flag_scheme; |
| int dirty; |
| }; |
| |
| static struct environment environment = { |
| .flag_scheme = FLAG_NONE, |
| }; |
| |
| static int have_redund_env; |
| |
| #define DEFAULT_ENV_INSTANCE_STATIC |
| #include <env_default.h> |
| |
| #define UBI_DEV_START "/dev/ubi" |
| #define UBI_SYSFS "/sys/class/ubi" |
| #define UBI_VOL_NAME_PATT "ubi%d_%d" |
| |
| static int is_ubi_devname(const char *devname) |
| { |
| return !strncmp(devname, UBI_DEV_START, sizeof(UBI_DEV_START) - 1); |
| } |
| |
| static int ubi_check_volume_sysfs_name(const char *volume_sysfs_name, |
| const char *volname) |
| { |
| char path[256]; |
| FILE *file; |
| char *name; |
| int ret; |
| |
| strcpy(path, UBI_SYSFS "/"); |
| strcat(path, volume_sysfs_name); |
| strcat(path, "/name"); |
| |
| file = fopen(path, "r"); |
| if (!file) |
| return -1; |
| |
| ret = fscanf(file, "%ms", &name); |
| fclose(file); |
| if (ret <= 0 || !name) { |
| fprintf(stderr, |
| "Failed to read from file %s, ret = %d, name = %s\n", |
| path, ret, name); |
| return -1; |
| } |
| |
| if (!strcmp(name, volname)) { |
| free(name); |
| return 0; |
| } |
| free(name); |
| |
| return -1; |
| } |
| |
| static int ubi_get_volnum_by_name(int devnum, const char *volname) |
| { |
| DIR *sysfs_ubi; |
| struct dirent *dirent; |
| int ret; |
| int tmp_devnum; |
| int volnum; |
| |
| sysfs_ubi = opendir(UBI_SYSFS); |
| if (!sysfs_ubi) |
| return -1; |
| |
| #ifdef DEBUG |
| fprintf(stderr, "Looking for volume name \"%s\"\n", volname); |
| #endif |
| |
| while (1) { |
| dirent = readdir(sysfs_ubi); |
| if (!dirent) |
| return -1; |
| |
| ret = sscanf(dirent->d_name, UBI_VOL_NAME_PATT, |
| &tmp_devnum, &volnum); |
| if (ret == 2 && devnum == tmp_devnum) { |
| if (ubi_check_volume_sysfs_name(dirent->d_name, |
| volname) == 0) { |
| closedir(sysfs_ubi); |
| return volnum; |
| } |
| } |
| } |
| closedir(sysfs_ubi); |
| |
| return -1; |
| } |
| |
| static int ubi_get_devnum_by_devname(const char *devname) |
| { |
| int devnum; |
| int ret; |
| |
| ret = sscanf(devname + sizeof(UBI_DEV_START) - 1, "%d", &devnum); |
| if (ret != 1) |
| return -1; |
| |
| return devnum; |
| } |
| |
| static const char *ubi_get_volume_devname(const char *devname, |
| const char *volname) |
| { |
| char *volume_devname; |
| int volnum; |
| int devnum; |
| int ret; |
| |
| devnum = ubi_get_devnum_by_devname(devname); |
| if (devnum < 0) |
| return NULL; |
| |
| volnum = ubi_get_volnum_by_name(devnum, volname); |
| if (volnum < 0) |
| return NULL; |
| |
| ret = asprintf(&volume_devname, "%s_%d", devname, volnum); |
| if (ret < 0) |
| return NULL; |
| |
| #ifdef DEBUG |
| fprintf(stderr, "Found ubi volume \"%s:%s\" -> %s\n", |
| devname, volname, volume_devname); |
| #endif |
| |
| return volume_devname; |
| } |
| |
| static void ubi_check_dev(unsigned int dev_id) |
| { |
| char *devname = (char *)DEVNAME(dev_id); |
| char *pname; |
| const char *volname = NULL; |
| const char *volume_devname; |
| |
| if (!is_ubi_devname(DEVNAME(dev_id))) |
| return; |
| |
| IS_UBI(dev_id) = 1; |
| |
| for (pname = devname; *pname != '\0'; pname++) { |
| if (*pname == ':') { |
| *pname = '\0'; |
| volname = pname + 1; |
| break; |
| } |
| } |
| |
| if (volname) { |
| /* Let's find real volume device name */ |
| volume_devname = ubi_get_volume_devname(devname, volname); |
| if (!volume_devname) { |
| fprintf(stderr, "Didn't found ubi volume \"%s\"\n", |
| volname); |
| return; |
| } |
| |
| free(devname); |
| DEVNAME(dev_id) = volume_devname; |
| } |
| } |
| |
| static int ubi_update_start(int fd, int64_t bytes) |
| { |
| if (ioctl(fd, UBI_IOCVOLUP, &bytes)) |
| return -1; |
| return 0; |
| } |
| |
| static int ubi_read(int fd, void *buf, size_t count) |
| { |
| ssize_t ret; |
| |
| while (count > 0) { |
| ret = read(fd, buf, count); |
| if (ret > 0) { |
| count -= ret; |
| buf += ret; |
| |
| continue; |
| } |
| |
| if (ret == 0) { |
| /* |
| * Happens in case of too short volume data size. If we |
| * return error status we will fail it will be treated |
| * as UBI device error. |
| * |
| * Leave catching this error to CRC check. |
| */ |
| fprintf(stderr, "Warning: end of data on ubi volume\n"); |
| return 0; |
| } else if (errno == EBADF) { |
| /* |
| * Happens in case of corrupted volume. The same as |
| * above, we cannot return error now, as we will still |
| * be able to successfully write environment later. |
| */ |
| fprintf(stderr, "Warning: corrupted volume?\n"); |
| return 0; |
| } else if (errno == EINTR) { |
| continue; |
| } |
| |
| fprintf(stderr, "Cannot read %u bytes from ubi volume, %s\n", |
| (unsigned int)count, strerror(errno)); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int ubi_write(int fd, const void *buf, size_t count) |
| { |
| ssize_t ret; |
| |
| while (count > 0) { |
| ret = write(fd, buf, count); |
| if (ret <= 0) { |
| if (ret < 0 && errno == EINTR) |
| continue; |
| |
| fprintf(stderr, "Cannot write %u bytes to ubi volume\n", |
| (unsigned int)count); |
| return -1; |
| } |
| |
| count -= ret; |
| buf += ret; |
| } |
| |
| return 0; |
| } |
| |
| static int flash_io(int mode, void *buf, size_t count); |
| static int parse_config(struct env_opts *opts); |
| |
| #if defined(CONFIG_FILE) |
| static int get_config(char *); |
| #endif |
| |
| static char *skip_chars(char *s) |
| { |
| for (; *s != '\0'; s++) { |
| if (isblank(*s) || *s == '=') |
| return s; |
| } |
| return NULL; |
| } |
| |
| static char *skip_blanks(char *s) |
| { |
| for (; *s != '\0'; s++) { |
| if (!isblank(*s)) |
| return s; |
| } |
| return NULL; |
| } |
| |
| /* |
| * s1 is either a simple 'name', or a 'name=value' pair. |
| * s2 is a 'name=value' pair. |
| * If the names match, return the value of s2, else NULL. |
| */ |
| static char *envmatch(char *s1, char *s2) |
| { |
| if (s1 == NULL || s2 == NULL) |
| return NULL; |
| |
| while (*s1 == *s2++) |
| if (*s1++ == '=') |
| return s2; |
| if (*s1 == '\0' && *(s2 - 1) == '=') |
| return s2; |
| return NULL; |
| } |
| |
| /** |
| * Search the environment for a variable. |
| * Return the value, if found, or NULL, if not found. |
| */ |
| char *fw_getenv(char *name) |
| { |
| char *env, *nxt; |
| |
| for (env = environment.data; *env; env = nxt + 1) { |
| char *val; |
| |
| for (nxt = env; *nxt; ++nxt) { |
| if (nxt >= &environment.data[ENV_SIZE]) { |
| fprintf(stderr, "## Error: " |
| "environment not terminated\n"); |
| return NULL; |
| } |
| } |
| val = envmatch(name, env); |
| if (!val) |
| continue; |
| return val; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Search the default environment for a variable. |
| * Return the value, if found, or NULL, if not found. |
| */ |
| char *fw_getdefenv(char *name) |
| { |
| char *env, *nxt; |
| |
| for (env = default_environment; *env; env = nxt + 1) { |
| char *val; |
| |
| for (nxt = env; *nxt; ++nxt) { |
| if (nxt >= &default_environment[ENV_SIZE]) { |
| fprintf(stderr, "## Error: " |
| "default environment not terminated\n"); |
| return NULL; |
| } |
| } |
| val = envmatch(name, env); |
| if (!val) |
| continue; |
| return val; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Print the current definition of one, or more, or all |
| * environment variables |
| */ |
| int fw_printenv(int argc, char *argv[], int value_only, struct env_opts *opts) |
| { |
| int i, rc = 0; |
| |
| if (value_only && argc != 1) { |
| fprintf(stderr, |
| "## Error: `-n'/`--noheader' option requires exactly one argument\n"); |
| return -1; |
| } |
| |
| if (!opts) |
| opts = &default_opts; |
| |
| if (fw_env_open(opts)) |
| return -1; |
| |
| if (argc == 0) { /* Print all env variables */ |
| char *env, *nxt; |
| for (env = environment.data; *env; env = nxt + 1) { |
| for (nxt = env; *nxt; ++nxt) { |
| if (nxt >= &environment.data[ENV_SIZE]) { |
| fprintf(stderr, "## Error: " |
| "environment not terminated\n"); |
| return -1; |
| } |
| } |
| |
| printf("%s\n", env); |
| } |
| fw_env_close(opts); |
| return 0; |
| } |
| |
| for (i = 0; i < argc; ++i) { /* print a subset of env variables */ |
| char *name = argv[i]; |
| char *val = NULL; |
| |
| val = fw_getenv(name); |
| if (!val) { |
| fprintf(stderr, "## Error: \"%s\" not defined\n", name); |
| rc = -1; |
| continue; |
| } |
| |
| if (value_only) { |
| puts(val); |
| break; |
| } |
| |
| printf("%s=%s\n", name, val); |
| } |
| |
| fw_env_close(opts); |
| |
| return rc; |
| } |
| |
| int fw_env_flush(struct env_opts *opts) |
| { |
| if (!opts) |
| opts = &default_opts; |
| |
| if (!environment.dirty) |
| return 0; |
| |
| /* |
| * Update CRC |
| */ |
| *environment.crc = crc32(0, (uint8_t *) environment.data, ENV_SIZE); |
| |
| /* write environment back to flash */ |
| if (flash_io(O_RDWR, environment.image, CUR_ENVSIZE)) { |
| fprintf(stderr, "Error: can't write fw_env to flash\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Set/Clear a single variable in the environment. |
| * This is called in sequence to update the environment |
| * in RAM without updating the copy in flash after each set |
| */ |
| int fw_env_write(char *name, char *value) |
| { |
| int len; |
| char *env, *nxt; |
| char *oldval = NULL; |
| int deleting, creating, overwriting; |
| |
| /* |
| * search if variable with this name already exists |
| */ |
| for (nxt = env = environment.data; *env; env = nxt + 1) { |
| for (nxt = env; *nxt; ++nxt) { |
| if (nxt >= &environment.data[ENV_SIZE]) { |
| fprintf(stderr, "## Error: " |
| "environment not terminated\n"); |
| errno = EINVAL; |
| return -1; |
| } |
| } |
| oldval = envmatch(name, env); |
| if (oldval) |
| break; |
| } |
| |
| deleting = (oldval && !(value && strlen(value))); |
| creating = (!oldval && (value && strlen(value))); |
| overwriting = (oldval && (value && strlen(value) && |
| strcmp(oldval, value))); |
| |
| /* check for permission */ |
| if (deleting) { |
| if (env_flags_validate_varaccess(name, |
| ENV_FLAGS_VARACCESS_PREVENT_DELETE)) { |
| printf("Can't delete \"%s\"\n", name); |
| errno = EROFS; |
| return -1; |
| } |
| } else if (overwriting) { |
| if (env_flags_validate_varaccess(name, |
| ENV_FLAGS_VARACCESS_PREVENT_OVERWR)) { |
| printf("Can't overwrite \"%s\"\n", name); |
| errno = EROFS; |
| return -1; |
| } else if (env_flags_validate_varaccess(name, |
| ENV_FLAGS_VARACCESS_PREVENT_NONDEF_OVERWR)) { |
| const char *defval = fw_getdefenv(name); |
| |
| if (defval == NULL) |
| defval = ""; |
| if (strcmp(oldval, defval) |
| != 0) { |
| printf("Can't overwrite \"%s\"\n", name); |
| errno = EROFS; |
| return -1; |
| } |
| } |
| } else if (creating) { |
| if (env_flags_validate_varaccess(name, |
| ENV_FLAGS_VARACCESS_PREVENT_CREATE)) { |
| printf("Can't create \"%s\"\n", name); |
| errno = EROFS; |
| return -1; |
| } |
| } else |
| /* Nothing to do */ |
| return 0; |
| |
| environment.dirty = 1; |
| if (deleting || overwriting) { |
| if (*++nxt == '\0') { |
| *env = '\0'; |
| } else { |
| for (;;) { |
| *env = *nxt++; |
| if ((*env == '\0') && (*nxt == '\0')) |
| break; |
| ++env; |
| } |
| } |
| *++env = '\0'; |
| } |
| |
| /* Delete only ? */ |
| if (!value || !strlen(value)) |
| return 0; |
| |
| /* |
| * Append new definition at the end |
| */ |
| for (env = environment.data; *env || *(env + 1); ++env) |
| ; |
| if (env > environment.data) |
| ++env; |
| /* |
| * Overflow when: |
| * "name" + "=" + "val" +"\0\0" > CUR_ENVSIZE - (env-environment) |
| */ |
| len = strlen(name) + 2; |
| /* add '=' for first arg, ' ' for all others */ |
| len += strlen(value) + 1; |
| |
| if (len > (&environment.data[ENV_SIZE] - env)) { |
| fprintf(stderr, |
| "Error: environment overflow, \"%s\" deleted\n", name); |
| return -1; |
| } |
| |
| while ((*env = *name++) != '\0') |
| env++; |
| *env = '='; |
| while ((*++env = *value++) != '\0') |
| ; |
| |
| /* end is marked with double '\0' */ |
| *++env = '\0'; |
| |
| return 0; |
| } |
| |
| /* |
| * Deletes or sets environment variables. Returns -1 and sets errno error codes: |
| * 0 - OK |
| * EINVAL - need at least 1 argument |
| * EROFS - certain variables ("ethaddr", "serial#") cannot be |
| * modified or deleted |
| * |
| */ |
| int fw_env_set(int argc, char *argv[], struct env_opts *opts) |
| { |
| int i; |
| size_t len; |
| char *name, **valv; |
| char *oldval; |
| char *value = NULL; |
| int valc; |
| int ret; |
| |
| if (!opts) |
| opts = &default_opts; |
| |
| if (argc < 1) { |
| fprintf(stderr, "## Error: variable name missing\n"); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (fw_env_open(opts)) { |
| fprintf(stderr, "Error: environment not initialized\n"); |
| return -1; |
| } |
| |
| name = argv[0]; |
| valv = argv + 1; |
| valc = argc - 1; |
| |
| if (env_flags_validate_env_set_params(name, valv, valc) < 0) { |
| fw_env_close(opts); |
| return -1; |
| } |
| |
| len = 0; |
| for (i = 0; i < valc; ++i) { |
| char *val = valv[i]; |
| size_t val_len = strlen(val); |
| |
| if (value) |
| value[len - 1] = ' '; |
| oldval = value; |
| value = realloc(value, len + val_len + 1); |
| if (!value) { |
| fprintf(stderr, |
| "Cannot malloc %zu bytes: %s\n", |
| len, strerror(errno)); |
| free(oldval); |
| return -1; |
| } |
| |
| memcpy(value + len, val, val_len); |
| len += val_len; |
| value[len++] = '\0'; |
| } |
| |
| fw_env_write(name, value); |
| |
| free(value); |
| |
| ret = fw_env_flush(opts); |
| fw_env_close(opts); |
| |
| return ret; |
| } |
| |
| /* |
| * Parse a file and configure the u-boot variables. |
| * The script file has a very simple format, as follows: |
| * |
| * Each line has a couple with name, value: |
| * <white spaces>variable_name<white spaces>variable_value |
| * |
| * Both variable_name and variable_value are interpreted as strings. |
| * Any character after <white spaces> and before ending \r\n is interpreted |
| * as variable's value (no comment allowed on these lines !) |
| * |
| * Comments are allowed if the first character in the line is # |
| * |
| * Returns -1 and sets errno error codes: |
| * 0 - OK |
| * -1 - Error |
| */ |
| int fw_parse_script(char *fname, struct env_opts *opts) |
| { |
| FILE *fp; |
| char *line = NULL; |
| size_t linesize = 0; |
| char *name; |
| char *val; |
| int lineno = 0; |
| int len; |
| int ret = 0; |
| |
| if (!opts) |
| opts = &default_opts; |
| |
| if (fw_env_open(opts)) { |
| fprintf(stderr, "Error: environment not initialized\n"); |
| return -1; |
| } |
| |
| if (strcmp(fname, "-") == 0) |
| fp = stdin; |
| else { |
| fp = fopen(fname, "r"); |
| if (fp == NULL) { |
| fprintf(stderr, "I cannot open %s for reading\n", |
| fname); |
| return -1; |
| } |
| } |
| |
| while ((len = getline(&line, &linesize, fp)) != -1) { |
| lineno++; |
| |
| /* |
| * Read a whole line from the file. If the line is not |
| * terminated, reports an error and exit. |
| */ |
| if (line[len - 1] != '\n') { |
| fprintf(stderr, |
| "Line %d not correctly terminated\n", |
| lineno); |
| ret = -1; |
| break; |
| } |
| |
| /* Drop ending line feed / carriage return */ |
| line[--len] = '\0'; |
| if (len && line[len - 1] == '\r') |
| line[--len] = '\0'; |
| |
| /* Skip comment or empty lines */ |
| if (len == 0 || line[0] == '#') |
| continue; |
| |
| /* |
| * Search for variable's name remove leading whitespaces |
| */ |
| name = skip_blanks(line); |
| if (!name) |
| continue; |
| |
| /* The first white space is the end of variable name */ |
| val = skip_chars(name); |
| len = strlen(name); |
| if (val) { |
| *val++ = '\0'; |
| if ((val - name) < len) |
| val = skip_blanks(val); |
| else |
| val = NULL; |
| } |
| #ifdef DEBUG |
| fprintf(stderr, "Setting %s : %s\n", |
| name, val ? val : " removed"); |
| #endif |
| |
| if (env_flags_validate_type(name, val) < 0) { |
| ret = -1; |
| break; |
| } |
| |
| /* |
| * If there is an error setting a variable, |
| * try to save the environment and returns an error |
| */ |
| if (fw_env_write(name, val)) { |
| fprintf(stderr, |
| "fw_env_write returns with error : %s\n", |
| strerror(errno)); |
| ret = -1; |
| break; |
| } |
| |
| } |
| free(line); |
| |
| /* Close file if not stdin */ |
| if (strcmp(fname, "-") != 0) |
| fclose(fp); |
| |
| ret |= fw_env_flush(opts); |
| |
| fw_env_close(opts); |
| |
| return ret; |
| } |
| |
| /** |
| * environment_end() - compute offset of first byte right after environment |
| * @dev - index of enviroment buffer |
| * Return: |
| * device offset of first byte right after environment |
| */ |
| off_t environment_end(int dev) |
| { |
| /* environment is block aligned */ |
| return DEVOFFSET(dev) + ENVSECTORS(dev) * DEVESIZE(dev); |
| } |
| |
| /* |
| * Test for bad block on NAND, just returns 0 on NOR, on NAND: |
| * 0 - block is good |
| * > 0 - block is bad |
| * < 0 - failed to test |
| */ |
| static int flash_bad_block(int fd, uint8_t mtd_type, loff_t blockstart) |
| { |
| if (mtd_type == MTD_NANDFLASH) { |
| int badblock = ioctl(fd, MEMGETBADBLOCK, &blockstart); |
| |
| if (badblock < 0) { |
| perror("Cannot read bad block mark"); |
| return badblock; |
| } |
| |
| if (badblock) { |
| #ifdef DEBUG |
| fprintf(stderr, "Bad block at 0x%llx, skipping\n", |
| (unsigned long long)blockstart); |
| #endif |
| return badblock; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Read data from flash at an offset into a provided buffer. On NAND it skips |
| * bad blocks but makes sure it stays within ENVSECTORS (dev) starting from |
| * the DEVOFFSET (dev) block. On NOR the loop is only run once. |
| */ |
| static int flash_read_buf(int dev, int fd, void *buf, size_t count, |
| off_t offset) |
| { |
| size_t blocklen; /* erase / write length - one block on NAND, |
| 0 on NOR */ |
| size_t processed = 0; /* progress counter */ |
| size_t readlen = count; /* current read length */ |
| off_t block_seek; /* offset inside the current block to the start |
| of the data */ |
| loff_t blockstart; /* running start of the current block - |
| MEMGETBADBLOCK needs 64 bits */ |
| int rc; |
| |
| blockstart = (offset / DEVESIZE(dev)) * DEVESIZE(dev); |
| |
| /* Offset inside a block */ |
| block_seek = offset - blockstart; |
| |
| if (DEVTYPE(dev) == MTD_NANDFLASH) { |
| /* |
| * NAND: calculate which blocks we are reading. We have |
| * to read one block at a time to skip bad blocks. |
| */ |
| blocklen = DEVESIZE(dev); |
| |
| /* Limit to one block for the first read */ |
| if (readlen > blocklen - block_seek) |
| readlen = blocklen - block_seek; |
| } else { |
| blocklen = 0; |
| } |
| |
| /* This only runs once on NOR flash */ |
| while (processed < count) { |
| rc = flash_bad_block(fd, DEVTYPE(dev), blockstart); |
| if (rc < 0) /* block test failed */ |
| return -1; |
| |
| if (blockstart + block_seek + readlen > environment_end(dev)) { |
| /* End of range is reached */ |
| fprintf(stderr, "Too few good blocks within range\n"); |
| return -1; |
| } |
| |
| if (rc) { /* block is bad */ |
| blockstart += blocklen; |
| continue; |
| } |
| |
| /* |
| * If a block is bad, we retry in the next block at the same |
| * offset - see env/nand.c::writeenv() |
| */ |
| lseek(fd, blockstart + block_seek, SEEK_SET); |
| |
| while (readlen) { |
| rc = read(fd, buf + processed, readlen); |
| if (rc == -1) { |
| fprintf(stderr, "Read error on %s: %s\n", |
| DEVNAME(dev), strerror(errno)); |
| return -1; |
| } |
| #ifdef DEBUG |
| fprintf(stderr, "Read 0x%x bytes at 0x%llx on %s\n", |
| rc, (unsigned long long)blockstart + block_seek, |
| DEVNAME(dev)); |
| #endif |
| processed += rc; |
| readlen -= rc; |
| } |
| |
| blockstart += blocklen; |
| readlen = min(blocklen, count - processed); |
| block_seek = 0; |
| } |
| |
| return processed; |
| } |
| |
| /* |
| * Write count bytes from begin of environment, but stay within |
| * ENVSECTORS(dev) sectors of |
| * DEVOFFSET (dev). Similar to the read case above, on NOR and dataflash we |
| * erase and write the whole data at once. |
| */ |
| static int flash_write_buf(int dev, int fd, void *buf, size_t count) |
| { |
| void *data; |
| struct erase_info_user erase; |
| size_t blocklen; /* length of NAND block / NOR erase sector */ |
| size_t erase_len; /* whole area that can be erased - may include |
| bad blocks */ |
| size_t erasesize; /* erase / write length - one block on NAND, |
| whole area on NOR */ |
| size_t processed = 0; /* progress counter */ |
| size_t write_total; /* total size to actually write - excluding |
| bad blocks */ |
| off_t erase_offset; /* offset to the first erase block (aligned) |
| below offset */ |
| off_t block_seek; /* offset inside the erase block to the start |
| of the data */ |
| loff_t blockstart; /* running start of the current block - |
| MEMGETBADBLOCK needs 64 bits */ |
| int was_locked = 0; /* flash lock flag */ |
| int rc; |
| |
| /* |
| * For mtd devices only offset and size of the environment do matter |
| */ |
| if (DEVTYPE(dev) == MTD_ABSENT) { |
| blocklen = count; |
| erase_len = blocklen; |
| blockstart = DEVOFFSET(dev); |
| block_seek = 0; |
| write_total = blocklen; |
| } else { |
| blocklen = DEVESIZE(dev); |
| |
| erase_offset = DEVOFFSET(dev); |
| |
| /* Maximum area we may use */ |
| erase_len = environment_end(dev) - erase_offset; |
| |
| blockstart = erase_offset; |
| |
| /* Offset inside a block */ |
| block_seek = DEVOFFSET(dev) - erase_offset; |
| |
| /* |
| * Data size we actually write: from the start of the block |
| * to the start of the data, then count bytes of data, and |
| * to the end of the block |
| */ |
| write_total = ((block_seek + count + blocklen - 1) / |
| blocklen) * blocklen; |
| } |
| |
| /* |
| * Support data anywhere within erase sectors: read out the complete |
| * area to be erased, replace the environment image, write the whole |
| * block back again. |
| */ |
| if (write_total > count) { |
| data = malloc(erase_len); |
| if (!data) { |
| fprintf(stderr, |
| "Cannot malloc %zu bytes: %s\n", |
| erase_len, strerror(errno)); |
| return -1; |
| } |
| |
| rc = flash_read_buf(dev, fd, data, write_total, erase_offset); |
| if (write_total != rc) |
| return -1; |
| |
| #ifdef DEBUG |
| fprintf(stderr, "Preserving data "); |
| if (block_seek != 0) |
| fprintf(stderr, "0x%x - 0x%lx", 0, block_seek - 1); |
| if (block_seek + count != write_total) { |
| if (block_seek != 0) |
| fprintf(stderr, " and "); |
| fprintf(stderr, "0x%lx - 0x%lx", |
| (unsigned long)block_seek + count, |
| (unsigned long)write_total - 1); |
| } |
| fprintf(stderr, "\n"); |
| #endif |
| /* Overwrite the old environment */ |
| memcpy(data + block_seek, buf, count); |
| } else { |
| /* |
| * We get here, iff offset is block-aligned and count is a |
| * multiple of blocklen - see write_total calculation above |
| */ |
| data = buf; |
| } |
| |
| if (DEVTYPE(dev) == MTD_NANDFLASH) { |
| /* |
| * NAND: calculate which blocks we are writing. We have |
| * to write one block at a time to skip bad blocks. |
| */ |
| erasesize = blocklen; |
| } else { |
| erasesize = erase_len; |
| } |
| |
| erase.length = erasesize; |
| |
| /* This only runs once on NOR flash and SPI-dataflash */ |
| while (processed < write_total) { |
| rc = flash_bad_block(fd, DEVTYPE(dev), blockstart); |
| if (rc < 0) /* block test failed */ |
| return rc; |
| |
| if (blockstart + erasesize > environment_end(dev)) { |
| fprintf(stderr, "End of range reached, aborting\n"); |
| return -1; |
| } |
| |
| if (rc) { /* block is bad */ |
| blockstart += blocklen; |
| continue; |
| } |
| |
| if (DEVTYPE(dev) != MTD_ABSENT) { |
| erase.start = blockstart; |
| was_locked = ioctl(fd, MEMISLOCKED, &erase); |
| /* treat any errors as unlocked flash */ |
| if (was_locked < 0) |
| was_locked = 0; |
| if (was_locked) |
| ioctl(fd, MEMUNLOCK, &erase); |
| /* These do not need an explicit erase cycle */ |
| if (DEVTYPE(dev) != MTD_DATAFLASH) |
| if (ioctl(fd, MEMERASE, &erase) != 0) { |
| fprintf(stderr, |
| "MTD erase error on %s: %s\n", |
| DEVNAME(dev), strerror(errno)); |
| return -1; |
| } |
| } |
| |
| if (lseek(fd, blockstart, SEEK_SET) == -1) { |
| fprintf(stderr, |
| "Seek error on %s: %s\n", |
| DEVNAME(dev), strerror(errno)); |
| return -1; |
| } |
| #ifdef DEBUG |
| fprintf(stderr, "Write 0x%llx bytes at 0x%llx\n", |
| (unsigned long long)erasesize, |
| (unsigned long long)blockstart); |
| #endif |
| if (write(fd, data + processed, erasesize) != erasesize) { |
| fprintf(stderr, "Write error on %s: %s\n", |
| DEVNAME(dev), strerror(errno)); |
| return -1; |
| } |
| |
| if (DEVTYPE(dev) != MTD_ABSENT) { |
| if (was_locked) |
| ioctl(fd, MEMLOCK, &erase); |
| } |
| |
| processed += erasesize; |
| block_seek = 0; |
| blockstart += erasesize; |
| } |
| |
| if (write_total > count) |
| free(data); |
| |
| return processed; |
| } |
| |
| /* |
| * Set obsolete flag at offset - NOR flash only |
| */ |
| static int flash_flag_obsolete(int dev, int fd, off_t offset) |
| { |
| int rc; |
| struct erase_info_user erase; |
| char tmp = ENV_REDUND_OBSOLETE; |
| int was_locked; /* flash lock flag */ |
| |
| erase.start = DEVOFFSET(dev); |
| erase.length = DEVESIZE(dev); |
| /* This relies on the fact, that ENV_REDUND_OBSOLETE == 0 */ |
| rc = lseek(fd, offset, SEEK_SET); |
| if (rc < 0) { |
| fprintf(stderr, "Cannot seek to set the flag on %s\n", |
| DEVNAME(dev)); |
| return rc; |
| } |
| was_locked = ioctl(fd, MEMISLOCKED, &erase); |
| /* treat any errors as unlocked flash */ |
| if (was_locked < 0) |
| was_locked = 0; |
| if (was_locked) |
| ioctl(fd, MEMUNLOCK, &erase); |
| rc = write(fd, &tmp, sizeof(tmp)); |
| if (was_locked) |
| ioctl(fd, MEMLOCK, &erase); |
| if (rc < 0) |
| perror("Could not set obsolete flag"); |
| |
| return rc; |
| } |
| |
| static int flash_write(int fd_current, int fd_target, int dev_target, void *buf, |
| size_t count) |
| { |
| int rc; |
| |
| switch (environment.flag_scheme) { |
| case FLAG_NONE: |
| break; |
| case FLAG_INCREMENTAL: |
| (*environment.flags)++; |
| break; |
| case FLAG_BOOLEAN: |
| *environment.flags = ENV_REDUND_ACTIVE; |
| break; |
| default: |
| fprintf(stderr, "Unimplemented flash scheme %u\n", |
| environment.flag_scheme); |
| return -1; |
| } |
| |
| #ifdef DEBUG |
| fprintf(stderr, "Writing new environment at 0x%llx on %s\n", |
| DEVOFFSET(dev_target), DEVNAME(dev_target)); |
| #endif |
| |
| if (IS_UBI(dev_target)) { |
| if (ubi_update_start(fd_target, CUR_ENVSIZE) < 0) |
| return -1; |
| return ubi_write(fd_target, buf, count); |
| } |
| |
| rc = flash_write_buf(dev_target, fd_target, buf, count); |
| if (rc < 0) |
| return rc; |
| |
| if (environment.flag_scheme == FLAG_BOOLEAN) { |
| /* Have to set obsolete flag */ |
| off_t offset = DEVOFFSET(dev_current) + |
| offsetof(struct env_image_redundant, flags); |
| #ifdef DEBUG |
| fprintf(stderr, |
| "Setting obsolete flag in environment at 0x%llx on %s\n", |
| DEVOFFSET(dev_current), DEVNAME(dev_current)); |
| #endif |
| flash_flag_obsolete(dev_current, fd_current, offset); |
| } |
| |
| return 0; |
| } |
| |
| static int flash_read(int fd, void *buf, size_t count) |
| { |
| int rc; |
| |
| if (IS_UBI(dev_current)) { |
| DEVTYPE(dev_current) = MTD_ABSENT; |
| |
| return ubi_read(fd, buf, count); |
| } |
| |
| rc = flash_read_buf(dev_current, fd, buf, count, |
| DEVOFFSET(dev_current)); |
| if (rc != CUR_ENVSIZE) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int flash_open_tempfile(const char **dname, const char **target_temp) |
| { |
| char *dup_name = strdup(DEVNAME(dev_current)); |
| char *temp_name = NULL; |
| int rc = -1; |
| |
| if (!dup_name) |
| return -1; |
| |
| *dname = dirname(dup_name); |
| if (!*dname) |
| goto err; |
| |
| rc = asprintf(&temp_name, "%s/XXXXXX", *dname); |
| if (rc == -1) |
| goto err; |
| |
| rc = mkstemp(temp_name); |
| if (rc == -1) { |
| /* fall back to in place write */ |
| fprintf(stderr, |
| "Can't create %s: %s\n", temp_name, strerror(errno)); |
| free(temp_name); |
| } else { |
| *target_temp = temp_name; |
| /* deliberately leak dup_name as dname /might/ point into |
| * it and we need it for our caller |
| */ |
| dup_name = NULL; |
| } |
| |
| err: |
| if (dup_name) |
| free(dup_name); |
| |
| return rc; |
| } |
| |
| static int flash_io_write(int fd_current, void *buf, size_t count) |
| { |
| int fd_target = -1, rc, dev_target; |
| const char *dname, *target_temp = NULL; |
| |
| if (have_redund_env) { |
| /* switch to next partition for writing */ |
| dev_target = !dev_current; |
| /* dev_target: fd_target, erase_target */ |
| fd_target = open(DEVNAME(dev_target), O_RDWR); |
| if (fd_target < 0) { |
| fprintf(stderr, |
| "Can't open %s: %s\n", |
| DEVNAME(dev_target), strerror(errno)); |
| rc = -1; |
| goto exit; |
| } |
| } else { |
| struct stat sb; |
| |
| if (fstat(fd_current, &sb) == 0 && S_ISREG(sb.st_mode)) { |
| /* if any part of flash_open_tempfile() fails we fall |
| * back to in-place writes |
| */ |
| fd_target = flash_open_tempfile(&dname, &target_temp); |
| } |
| dev_target = dev_current; |
| if (fd_target == -1) |
| fd_target = fd_current; |
| } |
| |
| rc = flash_write(fd_current, fd_target, dev_target, buf, count); |
| |
| if (fsync(fd_current) && !(errno == EINVAL || errno == EROFS)) { |
| fprintf(stderr, |
| "fsync failed on %s: %s\n", |
| DEVNAME(dev_current), strerror(errno)); |
| } |
| |
| if (fd_current != fd_target) { |
| if (fsync(fd_target) && |
| !(errno == EINVAL || errno == EROFS)) { |
| fprintf(stderr, |
| "fsync failed on %s: %s\n", |
| DEVNAME(dev_current), strerror(errno)); |
| } |
| |
| if (close(fd_target)) { |
| fprintf(stderr, |
| "I/O error on %s: %s\n", |
| DEVNAME(dev_target), strerror(errno)); |
| rc = -1; |
| } |
| |
| if (rc >= 0 && target_temp) { |
| int dir_fd; |
| |
| dir_fd = open(dname, O_DIRECTORY | O_RDONLY); |
| if (dir_fd == -1) |
| fprintf(stderr, |
| "Can't open %s: %s\n", |
| dname, strerror(errno)); |
| |
| if (rename(target_temp, DEVNAME(dev_target))) { |
| fprintf(stderr, |
| "rename failed %s => %s: %s\n", |
| target_temp, DEVNAME(dev_target), |
| strerror(errno)); |
| rc = -1; |
| } |
| |
| if (dir_fd != -1 && fsync(dir_fd)) |
| fprintf(stderr, |
| "fsync failed on %s: %s\n", |
| dname, strerror(errno)); |
| |
| if (dir_fd != -1 && close(dir_fd)) |
| fprintf(stderr, |
| "I/O error on %s: %s\n", |
| dname, strerror(errno)); |
| } |
| } |
| exit: |
| return rc; |
| } |
| |
| static int flash_io(int mode, void *buf, size_t count) |
| { |
| int fd_current, rc; |
| |
| /* dev_current: fd_current, erase_current */ |
| fd_current = open(DEVNAME(dev_current), mode); |
| if (fd_current < 0) { |
| fprintf(stderr, |
| "Can't open %s: %s\n", |
| DEVNAME(dev_current), strerror(errno)); |
| return -1; |
| } |
| |
| if (mode == O_RDWR) { |
| rc = flash_io_write(fd_current, buf, count); |
| } else { |
| rc = flash_read(fd_current, buf, count); |
| } |
| |
| if (close(fd_current)) { |
| fprintf(stderr, |
| "I/O error on %s: %s\n", |
| DEVNAME(dev_current), strerror(errno)); |
| return -1; |
| } |
| |
| return rc; |
| } |
| |
| /* |
| * Prevent confusion if running from erased flash memory |
| */ |
| int fw_env_open(struct env_opts *opts) |
| { |
| int crc0, crc0_ok; |
| unsigned char flag0; |
| void *buf0 = NULL; |
| |
| int crc1, crc1_ok; |
| unsigned char flag1; |
| void *buf1 = NULL; |
| |
| int ret; |
| |
| if (!opts) |
| opts = &default_opts; |
| |
| if (parse_config(opts)) /* should fill envdevices */ |
| return -EINVAL; |
| |
| buf0 = calloc(1, CUR_ENVSIZE); |
| if (buf0 == NULL) { |
| fprintf(stderr, |
| "Not enough memory for environment (%ld bytes)\n", |
| CUR_ENVSIZE); |
| ret = -ENOMEM; |
| goto open_cleanup; |
| } |
| |
| dev_current = 0; |
| if (flash_io(O_RDONLY, buf0, CUR_ENVSIZE)) { |
| ret = -EIO; |
| goto open_cleanup; |
| } |
| |
| if (!have_redund_env) { |
| struct env_image_single *single = buf0; |
| |
| crc0 = crc32(0, (uint8_t *)single->data, ENV_SIZE); |
| crc0_ok = (crc0 == single->crc); |
| if (!crc0_ok) { |
| fprintf(stderr, |
| "Warning: Bad CRC, using default environment\n"); |
| memcpy(single->data, default_environment, |
| sizeof(default_environment)); |
| environment.dirty = 1; |
| } |
| |
| environment.image = buf0; |
| environment.crc = &single->crc; |
| environment.flags = NULL; |
| environment.data = single->data; |
| } else { |
| struct env_image_redundant *redundant0 = buf0; |
| struct env_image_redundant *redundant1; |
| |
| crc0 = crc32(0, (uint8_t *)redundant0->data, ENV_SIZE); |
| crc0_ok = (crc0 == redundant0->crc); |
| |
| flag0 = redundant0->flags; |
| |
| dev_current = 1; |
| buf1 = calloc(1, CUR_ENVSIZE); |
| if (buf1 == NULL) { |
| fprintf(stderr, |
| "Not enough memory for environment (%ld bytes)\n", |
| CUR_ENVSIZE); |
| ret = -ENOMEM; |
| goto open_cleanup; |
| } |
| redundant1 = buf1; |
| |
| if (flash_io(O_RDONLY, buf1, CUR_ENVSIZE)) { |
| ret = -EIO; |
| goto open_cleanup; |
| } |
| |
| /* Check flag scheme compatibility */ |
| if (DEVTYPE(dev_current) == MTD_NORFLASH && |
| DEVTYPE(!dev_current) == MTD_NORFLASH) { |
| environment.flag_scheme = FLAG_BOOLEAN; |
| } else if (DEVTYPE(dev_current) == MTD_NANDFLASH && |
| DEVTYPE(!dev_current) == MTD_NANDFLASH) { |
| environment.flag_scheme = FLAG_INCREMENTAL; |
| } else if (DEVTYPE(dev_current) == MTD_DATAFLASH && |
| DEVTYPE(!dev_current) == MTD_DATAFLASH) { |
| environment.flag_scheme = FLAG_BOOLEAN; |
| } else if (DEVTYPE(dev_current) == MTD_UBIVOLUME && |
| DEVTYPE(!dev_current) == MTD_UBIVOLUME) { |
| environment.flag_scheme = FLAG_INCREMENTAL; |
| } else if (DEVTYPE(dev_current) == MTD_ABSENT && |
| DEVTYPE(!dev_current) == MTD_ABSENT && |
| IS_UBI(dev_current) == IS_UBI(!dev_current)) { |
| environment.flag_scheme = FLAG_INCREMENTAL; |
| } else { |
| fprintf(stderr, "Incompatible flash types!\n"); |
| ret = -EINVAL; |
| goto open_cleanup; |
| } |
| |
| crc1 = crc32(0, (uint8_t *)redundant1->data, ENV_SIZE); |
| |
| crc1_ok = (crc1 == redundant1->crc); |
| flag1 = redundant1->flags; |
| |
| if (memcmp(redundant0->data, redundant1->data, ENV_SIZE) || |
| !crc0_ok || !crc1_ok) |
| environment.dirty = 1; |
| |
| if (crc0_ok && !crc1_ok) { |
| dev_current = 0; |
| } else if (!crc0_ok && crc1_ok) { |
| dev_current = 1; |
| } else if (!crc0_ok && !crc1_ok) { |
| fprintf(stderr, |
| "Warning: Bad CRC, using default environment\n"); |
| memcpy(redundant0->data, default_environment, |
| sizeof(default_environment)); |
| environment.dirty = 1; |
| dev_current = 0; |
| } else { |
| switch (environment.flag_scheme) { |
| case FLAG_BOOLEAN: |
| if (flag0 == ENV_REDUND_ACTIVE && |
| flag1 == ENV_REDUND_OBSOLETE) { |
| dev_current = 0; |
| } else if (flag0 == ENV_REDUND_OBSOLETE && |
| flag1 == ENV_REDUND_ACTIVE) { |
| dev_current = 1; |
| } else if (flag0 == flag1) { |
| dev_current = 0; |
| } else if (flag0 == 0xFF) { |
| dev_current = 0; |
| } else if (flag1 == 0xFF) { |
| dev_current = 1; |
| } else { |
| dev_current = 0; |
| } |
| break; |
| case FLAG_INCREMENTAL: |
| if (flag0 == 255 && flag1 == 0) |
| dev_current = 1; |
| else if ((flag1 == 255 && flag0 == 0) || |
| flag0 >= flag1) |
| dev_current = 0; |
| else /* flag1 > flag0 */ |
| dev_current = 1; |
| break; |
| default: |
| fprintf(stderr, "Unknown flag scheme %u\n", |
| environment.flag_scheme); |
| return -1; |
| } |
| } |
| |
| /* |
| * If we are reading, we don't need the flag and the CRC any |
| * more, if we are writing, we will re-calculate CRC and update |
| * flags before writing out |
| */ |
| if (dev_current) { |
| environment.image = buf1; |
| environment.crc = &redundant1->crc; |
| environment.flags = &redundant1->flags; |
| environment.data = redundant1->data; |
| free(buf0); |
| } else { |
| environment.image = buf0; |
| environment.crc = &redundant0->crc; |
| environment.flags = &redundant0->flags; |
| environment.data = redundant0->data; |
| free(buf1); |
| } |
| #ifdef DEBUG |
| fprintf(stderr, "Selected env in %s\n", DEVNAME(dev_current)); |
| #endif |
| } |
| return 0; |
| |
| open_cleanup: |
| free(buf0); |
| free(buf1); |
| |
| return ret; |
| } |
| |
| /* |
| * Simply free allocated buffer with environment |
| */ |
| int fw_env_close(struct env_opts *opts) |
| { |
| if (environment.image) |
| free(environment.image); |
| |
| environment.image = NULL; |
| |
| return 0; |
| } |
| |
| static int check_device_config(int dev) |
| { |
| struct stat st; |
| int32_t lnum = 0; |
| int fd, rc = 0; |
| |
| /* Fills in IS_UBI(), converts DEVNAME() with ubi volume name */ |
| ubi_check_dev(dev); |
| |
| fd = open(DEVNAME(dev), O_RDONLY); |
| if (fd < 0) { |
| fprintf(stderr, |
| "Cannot open %s: %s\n", DEVNAME(dev), strerror(errno)); |
| return -1; |
| } |
| |
| rc = fstat(fd, &st); |
| if (rc < 0) { |
| fprintf(stderr, "Cannot stat the file %s\n", DEVNAME(dev)); |
| goto err; |
| } |
| |
| if (IS_UBI(dev)) { |
| rc = ioctl(fd, UBI_IOCEBISMAP, &lnum); |
| if (rc < 0) { |
| fprintf(stderr, "Cannot get UBI information for %s\n", |
| DEVNAME(dev)); |
| goto err; |
| } |
| } else if (S_ISCHR(st.st_mode)) { |
| struct mtd_info_user mtdinfo; |
| rc = ioctl(fd, MEMGETINFO, &mtdinfo); |
| if (rc < 0) { |
| fprintf(stderr, "Cannot get MTD information for %s\n", |
| DEVNAME(dev)); |
| goto err; |
| } |
| if (mtdinfo.type != MTD_NORFLASH && |
| mtdinfo.type != MTD_NANDFLASH && |
| mtdinfo.type != MTD_DATAFLASH && |
| mtdinfo.type != MTD_UBIVOLUME) { |
| fprintf(stderr, "Unsupported flash type %u on %s\n", |
| mtdinfo.type, DEVNAME(dev)); |
| goto err; |
| } |
| DEVTYPE(dev) = mtdinfo.type; |
| if (DEVESIZE(dev) == 0 && ENVSECTORS(dev) == 0 && |
| mtdinfo.erasesize > 0) { |
| if (mtdinfo.type == MTD_NORFLASH) |
| DEVESIZE(dev) = mtdinfo.erasesize; |
| else if (mtdinfo.type == MTD_NANDFLASH) { |
| DEVESIZE(dev) = mtdinfo.erasesize; |
| ENVSECTORS(dev) = |
| mtdinfo.size / mtdinfo.erasesize; |
| } |
| } |
| if (DEVESIZE(dev) == 0) |
| /* Assume the erase size is the same as the env-size */ |
| DEVESIZE(dev) = ENVSIZE(dev); |
| } else { |
| uint64_t size; |
| DEVTYPE(dev) = MTD_ABSENT; |
| if (DEVESIZE(dev) == 0) |
| /* Assume the erase size to be 512 bytes */ |
| DEVESIZE(dev) = 0x200; |
| |
| /* |
| * Check for negative offsets, treat it as backwards offset |
| * from the end of the block device |
| */ |
| if (DEVOFFSET(dev) < 0) { |
| rc = ioctl(fd, BLKGETSIZE64, &size); |
| if (rc < 0) { |
| fprintf(stderr, |
| "Could not get block device size on %s\n", |
| DEVNAME(dev)); |
| goto err; |
| } |
| |
| DEVOFFSET(dev) = DEVOFFSET(dev) + size; |
| #ifdef DEBUG |
| fprintf(stderr, |
| "Calculated device offset 0x%llx on %s\n", |
| DEVOFFSET(dev), DEVNAME(dev)); |
| #endif |
| } |
| } |
| |
| if (ENVSECTORS(dev) == 0) |
| /* Assume enough sectors to cover the environment */ |
| ENVSECTORS(dev) = DIV_ROUND_UP(ENVSIZE(dev), DEVESIZE(dev)); |
| |
| if (DEVOFFSET(dev) % DEVESIZE(dev) != 0) { |
| fprintf(stderr, |
| "Environment does not start on (erase) block boundary\n"); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (ENVSIZE(dev) > ENVSECTORS(dev) * DEVESIZE(dev)) { |
| fprintf(stderr, |
| "Environment does not fit into available sectors\n"); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| err: |
| close(fd); |
| return rc; |
| } |
| |
| static int find_nvmem_device(void) |
| { |
| const char *path = "/sys/bus/nvmem/devices"; |
| struct dirent *dent; |
| char *nvmem = NULL; |
| char comp[256]; |
| char buf[32]; |
| int bytes; |
| DIR *dir; |
| |
| dir = opendir(path); |
| if (!dir) { |
| return -EIO; |
| } |
| |
| while (!nvmem && (dent = readdir(dir))) { |
| struct stat s; |
| FILE *fp; |
| size_t size; |
| |
| if (!strcmp(dent->d_name, ".") || !strcmp(dent->d_name, "..")) { |
| continue; |
| } |
| |
| bytes = snprintf(comp, sizeof(comp), "%s/%s/of_node/compatible", path, dent->d_name); |
| if (bytes < 0 || bytes == sizeof(comp)) { |
| continue; |
| } |
| |
| fp = fopen(comp, "r"); |
| if (!fp) { |
| continue; |
| } |
| |
| if (fstat(fileno(fp), &s)) { |
| fprintf(stderr, "Failed to fstat %s\n", comp); |
| goto next; |
| } |
| |
| if (s.st_size >= sizeof(buf)) { |
| goto next; |
| } |
| |
| size = fread(buf, s.st_size, 1, fp); |
| if (size != 1) { |
| fprintf(stderr, |
| "read failed about %s\n", comp); |
| goto next; |
| } |
| buf[s.st_size] = '\0'; |
| |
| if (!strcmp(buf, "u-boot,env")) { |
| bytes = asprintf(&nvmem, "%s/%s/nvmem", path, dent->d_name); |
| if (bytes < 0) { |
| nvmem = NULL; |
| } |
| } |
| |
| next: |
| fclose(fp); |
| } |
| |
| closedir(dir); |
| |
| if (nvmem) { |
| struct stat s; |
| |
| stat(nvmem, &s); |
| |
| DEVNAME(0) = nvmem; |
| DEVOFFSET(0) = 0; |
| ENVSIZE(0) = s.st_size; |
| |
| return 0; |
| } |
| |
| return -ENOENT; |
| } |
| |
| static int parse_config(struct env_opts *opts) |
| { |
| int rc; |
| |
| if (!opts) |
| opts = &default_opts; |
| |
| #if defined(CONFIG_FILE) |
| /* Fills in DEVNAME(), ENVSIZE(), DEVESIZE(). Or don't. */ |
| if (get_config(opts->config_file)) { |
| if (find_nvmem_device()) { |
| fprintf(stderr, "Cannot parse config file '%s': %m\n", |
| opts->config_file); |
| fprintf(stderr, "Failed to find NVMEM device\n"); |
| return -1; |
| } |
| } |
| #else |
| DEVNAME(0) = DEVICE1_NAME; |
| DEVOFFSET(0) = DEVICE1_OFFSET; |
| ENVSIZE(0) = ENV1_SIZE; |
| |
| /* Set defaults for DEVESIZE, ENVSECTORS later once we |
| * know DEVTYPE |
| */ |
| #ifdef DEVICE1_ESIZE |
| DEVESIZE(0) = DEVICE1_ESIZE; |
| #endif |
| #ifdef DEVICE1_ENVSECTORS |
| ENVSECTORS(0) = DEVICE1_ENVSECTORS; |
| #endif |
| |
| #ifdef HAVE_REDUND |
| DEVNAME(1) = DEVICE2_NAME; |
| DEVOFFSET(1) = DEVICE2_OFFSET; |
| ENVSIZE(1) = ENV2_SIZE; |
| |
| /* Set defaults for DEVESIZE, ENVSECTORS later once we |
| * know DEVTYPE |
| */ |
| #ifdef DEVICE2_ESIZE |
| DEVESIZE(1) = DEVICE2_ESIZE; |
| #endif |
| #ifdef DEVICE2_ENVSECTORS |
| ENVSECTORS(1) = DEVICE2_ENVSECTORS; |
| #endif |
| have_redund_env = 1; |
| #endif |
| #endif |
| rc = check_device_config(0); |
| if (rc < 0) |
| return rc; |
| |
| if (have_redund_env) { |
| rc = check_device_config(1); |
| if (rc < 0) |
| return rc; |
| |
| if (ENVSIZE(0) != ENVSIZE(1)) { |
| fprintf(stderr, |
| "Redundant environments have unequal size\n"); |
| return -1; |
| } |
| } |
| |
| usable_envsize = CUR_ENVSIZE - sizeof(uint32_t); |
| if (have_redund_env) |
| usable_envsize -= sizeof(char); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_FILE) |
| static int get_config(char *fname) |
| { |
| FILE *fp; |
| int i = 0; |
| int rc; |
| char *line = NULL; |
| size_t linesize = 0; |
| char *devname; |
| |
| fp = fopen(fname, "r"); |
| if (fp == NULL) |
| return -1; |
| |
| while (i < 2 && getline(&line, &linesize, fp) != -1) { |
| /* Skip comment strings */ |
| if (line[0] == '#') |
| continue; |
| |
| rc = sscanf(line, "%ms %lli %lx %lx %lx", |
| &devname, |
| &DEVOFFSET(i), |
| &ENVSIZE(i), &DEVESIZE(i), &ENVSECTORS(i)); |
| |
| if (rc < 3) |
| continue; |
| |
| DEVNAME(i) = devname; |
| |
| /* Set defaults for DEVESIZE, ENVSECTORS later once we |
| * know DEVTYPE |
| */ |
| |
| i++; |
| } |
| free(line); |
| fclose(fp); |
| |
| have_redund_env = i - 1; |
| if (!i) { /* No valid entries found */ |
| errno = EINVAL; |
| return -1; |
| } else |
| return 0; |
| } |
| #endif |