| #include <configs/renesas_rcar3.config> |
| |
| CONFIG_ARM=y |
| CONFIG_ARCH_RENESAS=y |
| CONFIG_RCAR_GEN3=y |
| CONFIG_TEXT_BASE=0x50000000 |
| CONFIG_SYS_MALLOC_F_LEN=0x2000 |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_ENV_OFFSET=0xFFFFE000 |
| CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a774a1-beacon-rzg2m-kit" |
| CONFIG_TARGET_BEACON_RZG2M=y |
| # CONFIG_SPL is not set |
| # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set |
| CONFIG_USE_BOOTCOMMAND=y |
| CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" |
| CONFIG_DEFAULT_FDT_FILE="r8a774a1-beacon-rzg2m-kit.dtb" |
| # CONFIG_BOARD_EARLY_INIT_F is not set |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_MTD=y |
| CONFIG_CMD_PART=y |
| CONFIG_CMD_USB=y |
| CONFIG_OF_LIST="renesas/r8a774a1-beacon-rzg2m-kit renesas/r8a774b1-beacon-rzg2n-kit renesas/r8a774e1-beacon-rzg2h-kit" |
| CONFIG_MULTI_DTB_FIT_LZO=y |
| CONFIG_MULTI_DTB_FIT_USER_DEFINED_AREA=y |
| CONFIG_ENV_IS_IN_MMC=y |
| CONFIG_SYS_MMC_ENV_PART=2 |
| CONFIG_DM_PCA953X=y |
| CONFIG_SYS_I2C_RCAR_I2C=y |
| CONFIG_SYS_I2C_RCAR_IIC=y |
| CONFIG_MMC_IO_VOLTAGE=y |
| CONFIG_MMC_UHS_SUPPORT=y |
| CONFIG_MMC_HS200_SUPPORT=y |
| CONFIG_RENESAS_SDHI=y |
| CONFIG_DM_MTD=y |
| CONFIG_SPI_FLASH_WINBOND=y |
| CONFIG_PHY_ATHEROS=y |
| CONFIG_PHY_MICREL=y |
| CONFIG_PHY_MICREL_KSZ90X1=y |
| CONFIG_RENESAS_RAVB=y |
| CONFIG_SPECIFY_CONSOLE_INDEX=y |
| CONFIG_SYSRESET=y |
| CONFIG_SYSRESET_PSCI=y |
| CONFIG_USB=y |
| CONFIG_USB_XHCI_HCD=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_EHCI_GENERIC=y |
| CONFIG_USB_STORAGE=y |