TI: Rework SRAM definitions and maximums

On all TI platforms the ROM defines a "downloaded image" area at or near
the start of SRAM which is followed by a reserved area.  As it is at
best bad form and at worst possibly harmful in corner cases to write in
this reserved area, we stop doing that by adding in the define
NON_SECURE_SRAM_IMG_END to say where the end of the downloaded image
area is and make SRAM_SCRATCH_SPACE_ADDR be one kilobyte before this.
At current we define the end of scratch space at 0x228 bytes past the
start of scratch space this this gives us a lot of room to grow.  As
these scratch uses are non-optional today, all targets are modified to
respect this boundary.

Tested on OMAP4 Pandaboard, OMAP3 Beagle xM

Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Nagendra T S <nagendra@mistralsolutions.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Paul Kocialkowski <contact@paulk.fr>
Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Steve Sakoman <sakoman@gmail.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Thomas Weber <weber@corscience.de>
Cc: Hannes Schmelzer <oe5hpm@oevsv.at>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Heiko Schocher <hs@denx.de>
Cc: Samuel Egli <samuel.egli@siemens.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Cc: Ben Whitten <ben.whitten@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: "B, Ravi" <ravibabu@ti.com>
Cc: "Matwey V. Kornilov" <matwey.kornilov@gmail.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Ash Charles <ashcharles@gmail.com>
Cc: "Kipisz, Steven" <s-kipisz2@ti.com>
Cc: Daniel Allred <d-allred@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
index 47962da..3293caa 100644
--- a/arch/arm/include/asm/arch-am33xx/omap.h
+++ b/arch/arm/include/asm/arch-am33xx/omap.h
@@ -15,24 +15,23 @@
 #ifndef _OMAP_H_
 #define _OMAP_H_
 
+#include <linux/sizes.h>
+
 #ifdef CONFIG_AM33XX
 #define NON_SECURE_SRAM_START	0x402F0400
 #define NON_SECURE_SRAM_END	0x40310000
-#define SRAM_SCRATCH_SPACE_ADDR	0x4030B800
+#define NON_SECURE_SRAM_IMG_END	0x4030B800
 #elif defined(CONFIG_TI81XX)
 #define NON_SECURE_SRAM_START	0x40300000
 #define NON_SECURE_SRAM_END	0x40320000
-#define SRAM_SCRATCH_SPACE_ADDR	0x4031B800
+#define NON_SECURE_SRAM_IMG_END	0x4031B800
 #elif defined(CONFIG_AM43XX)
 #define NON_SECURE_SRAM_START	0x402F0400
 #define NON_SECURE_SRAM_END	0x40340000
-#define SRAM_SCRATCH_SPACE_ADDR	0x40337C00
-#define AM4372_BOARD_NAME_START	SRAM_SCRATCH_SPACE_ADDR
-#define AM4372_BOARD_NAME_END	SRAM_SCRATCH_SPACE_ADDR + 0xC
-#define AM4372_BOARD_VERSION_START	SRAM_SCRATCH_SPACE_ADDR + 0xD
-#define AM4372_BOARD_VERSION_END	SRAM_SCRATCH_SPACE_ADDR + 0x14
+#define NON_SECURE_SRAM_IMG_END	0x40337DE0
 #define QSPI_BASE              0x47900000
 #endif
+#define SRAM_SCRATCH_SPACE_ADDR	(NON_SECURE_SRAM_IMG_END - SZ_1K)
 
 /* Boot parameters */
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/arch-omap3/omap.h b/arch/arm/include/asm/arch-omap3/omap.h
index bc0e02a..417ff89 100644
--- a/arch/arm/include/asm/arch-omap3/omap.h
+++ b/arch/arm/include/asm/arch-omap3/omap.h
@@ -10,6 +10,8 @@
 #ifndef _OMAP3_H_
 #define _OMAP3_H_
 
+#include <linux/sizes.h>
+
 /* Stuff on L3 Interconnect */
 #define SMX_APE_BASE			0x68000000
 
@@ -145,7 +147,8 @@
 
 #define NON_SECURE_SRAM_START		0x40208000 /* Works for GP & EMU */
 #define NON_SECURE_SRAM_END		0x40210000
-#define SRAM_SCRATCH_SPACE_ADDR		0x4020E000
+#define NON_SECURE_SRAM_IMG_END		0x4020F000
+#define SRAM_SCRATCH_SPACE_ADDR		(NON_SECURE_SRAM_IMG_END - SZ_1K)
 
 #define LOW_LEVEL_SRAM_STACK		0x4020FFFC
 
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index 5ccda6e..b86a776 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -19,6 +19,8 @@
 #include <asm/types.h>
 #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
 
+#include <linux/sizes.h>
+
 /*
  * L4 Peripherals - L4 Wakeup and L4 Core now
  */
@@ -109,7 +111,8 @@
  */
 #define NON_SECURE_SRAM_START	0x40304000
 #define NON_SECURE_SRAM_END	0x4030E000	/* Not inclusive */
-#define SRAM_SCRATCH_SPACE_ADDR	0x4030C000
+#define NON_SECURE_SRAM_IMG_END	0x4030C000
+#define SRAM_SCRATCH_SPACE_ADDR	(NON_SECURE_SRAM_IMG_END - SZ_1K)
 /* base address for indirect vectors (internal boot mode) */
 #define SRAM_ROM_VECT_BASE	0x4030D000
 
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 2fd5cda..ef8e975 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -16,6 +16,8 @@
 #include <asm/types.h>
 #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
 
+#include <linux/sizes.h>
+
 /*
  * L4 Peripherals - L4 Wakeup and L4 Core now
  */
@@ -186,11 +188,13 @@
 #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 #define NON_SECURE_SRAM_START	0x40300000
 #define NON_SECURE_SRAM_END	0x40380000	/* Not inclusive */
+#define NON_SECURE_SRAM_IMG_END	0x4037E000
 #else
 #define NON_SECURE_SRAM_START	0x40300000
 #define NON_SECURE_SRAM_END	0x40320000	/* Not inclusive */
+#define NON_SECURE_SRAM_IMG_END	0x4031E000
 #endif
-#define SRAM_SCRATCH_SPACE_ADDR	0x4031E000
+#define SRAM_SCRATCH_SPACE_ADDR	(NON_SECURE_SRAM_IMG_END - SZ_1K)
 
 /* base address for indirect vectors (internal boot mode) */
 #define SRAM_ROM_VECT_BASE	0x4031F000
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 30c4278..56a63b4 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -277,7 +277,8 @@
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200800
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index ef4a8ba..c9bc093 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -335,7 +335,8 @@
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200000
-#define CONFIG_SPL_MAX_SIZE		(64 * 1024)
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 518b904..fe2c65f 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -37,9 +37,6 @@
 
 /* SPL defines. */
 #define CONFIG_SPL_TEXT_BASE		CONFIG_ISW_ENTRY_ADDR
-#define CONFIG_SPL_MAX_SIZE		(NON_SECURE_SRAM_END - \
-					CONFIG_PUB_ROM_DATA_SIZE - \
-					CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
 #define CONFIG_SPL_POWER_SUPPORT
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 46e8d4c..cf74dbe 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -102,8 +102,6 @@
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_DM_SPI
 #undef CONFIG_DM_SPI_FLASH
-#undef CONFIG_SPL_MAX_SIZE
-#define CONFIG_SPL_MAX_SIZE             (256 << 10) /* 256 KiB */
 #endif
 
 /* SPI SPL */
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 04da877..1de5edc 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -46,10 +46,12 @@
  * area between 0x402F0400 and 0x4030B800 as a download area and
  * 0x4030B800 to 0x4030CE00 as a public stack area.  The ROM also
  * supports X-MODEM loading via UART, and we leverage this and then use
- * Y-MODEM to load u-boot.img, when booted over UART.
+ * Y-MODEM to load u-boot.img, when booted over UART.  We must also include
+ * the scratch space that U-Boot uses in SRAM.
  */
 #define CONFIG_SPL_TEXT_BASE		0x402F0400
-#define CONFIG_SPL_MAX_SIZE		(0x4030B800 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 /*
  * Since SPL did pll and ddr initialization for us,
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 03dc3cc..5d717a4 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -344,7 +344,8 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
 #define CONFIG_SPL_TEXT_BASE		0x40200800
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 /*
  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index b896d4d..bdfb168 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -153,7 +153,6 @@
 
 /* SPL defines. */
 #define CONFIG_SPL_TEXT_BASE		0x40300350
-#define CONFIG_SPL_MAX_SIZE		(64 * 1024)
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + (128 << 20))
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(256 * 1024)
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index b66949f..ed1ee54 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -185,8 +185,6 @@
 /* In SPL, use the environment and discard MMC support for space. */
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_SPL_MMC_SUPPORT
-#undef CONFIG_SPL_MAX_SIZE
-#define CONFIG_SPL_MAX_SIZE             (64 << 10) /* 64 KiB */
 #endif
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_ENV_IS_IN_SPI_FLASH
diff --git a/include/configs/kc1.h b/include/configs/kc1.h
index 8b95799..c1a9e64 100644
--- a/include/configs/kc1.h
+++ b/include/configs/kc1.h
@@ -119,7 +119,8 @@
 #define CONFIG_SPL_FRAMEWORK
 
 #define CONFIG_SPL_TEXT_BASE		0x40300000
-#define CONFIG_SPL_MAX_SIZE		(48 * 1024)
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		(512 * 1024)
 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index e87b4c0..2397b5e 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -343,7 +343,8 @@
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40200800
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index e0d2593..3389bf3 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -16,11 +16,11 @@
 #include <configs/ti_omap3_common.h>
 #include <asm/mach-types.h>
 
-/* SRAM starts at 0x40200000 and ends at 0x4020FFFF (64KB) */
-#undef CONFIG_SPL_MAX_SIZE
+/*
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
+ */
 #undef CONFIG_SPL_TEXT_BASE
-
-#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SPL_TEXT_BASE		0x40200000
 
 /*
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 05a4361..496da17 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -30,11 +30,13 @@
 
 #include <configs/ti_omap3_common.h>
 
-/* Override default SPL info to minimize empty space and allow BCH8 in SPL */
+/*
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
+ * order to allow for BCH8 to fit in.
+ */
 #undef CONFIG_SPL_TEXT_BASE
-#undef CONFIG_SPL_MAX_SIZE
-#define CONFIG_SPL_TEXT_BASE   0x40200000
-#define CONFIG_SPL_MAX_SIZE    (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_TEXT_BASE		0x40200000
 
 /* Display CPU and Board information */
 
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 618a546..841e4bd 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -11,10 +11,12 @@
 #define CONFIG_NAND
 
 #include <configs/ti_omap3_common.h>
-#undef CONFIG_SPL_MAX_SIZE
+/*
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
+ */
 #undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE	0x40200000
-#define CONFIG_SPL_MAX_SIZE    (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_TEXT_BASE		0x40200000
 
 #define CONFIG_BCH
 
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 3d25e3d..1f9b390 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -124,7 +124,8 @@
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x402F0400
-#define CONFIG_SPL_MAX_SIZE		(101 * 1024)
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
diff --git a/include/configs/sniper.h b/include/configs/sniper.h
index e2f5e60..5062cd0 100644
--- a/include/configs/sniper.h
+++ b/include/configs/sniper.h
@@ -126,7 +126,8 @@
 #define CONFIG_SPL_FRAMEWORK
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		(512 * 1024)
 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 5213065..35030fe 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -218,7 +218,8 @@
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
 
 #define CONFIG_SYS_SPL_MALLOC_START	0x8f000000
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 52bd837..7b6ebda 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -326,7 +326,8 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
 #define CONFIG_SPL_TEXT_BASE		0x40200800
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 /*
  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 732854e..198f649 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -157,7 +157,8 @@
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40300000
-#define CONFIG_SPL_MAX_SIZE		((128 - 18) * 1024)
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 17f12a8..071511c 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -123,7 +123,8 @@
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE    0x40400000
-#define CONFIG_SPL_MAX_SIZE     ((128 - 18) * 1024)
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 #define CONFIG_SPL_BSS_START_ADDR   0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE     0x80000     /* 512 KB */
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index a9b10d0..9a671de 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -58,7 +58,6 @@
  * Y-MODEM to load u-boot.img, when booted over UART.
  */
 #define CONFIG_SPL_TEXT_BASE		0x402F0400
-#define CONFIG_SPL_MAX_SIZE		(0x4030B800 - CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
 
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 9f947ee..d60d213 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -212,14 +212,14 @@
 /*
  * Place the image at the start of the ROM defined image space (per
  * CONFIG_SPL_TEXT_BASE and we limit our size to the ROM-defined
- * downloaded image area.  We initalize DRAM as soon as we can so that
- * we can place stack, malloc and BSS there.  We load U-Boot itself into
- * memory at 0x80800000 for legacy reasons (to not conflict with older
- * SPLs).  We have our BSS be placed 2MiB after this, to allow for the
- * default Linux kernel address of 0x80008000 to work with most sized
- * kernels, in the Falcon Mode case.  We have the SPL malloc pool at the
- * end of the BSS area.  We suggest that the stack be placed at 32MiB after
- * the start of DRAM to allow room for all of the above (handled in Kconfig).
+ * downloaded image area minus 1KiB for scratch space.  We initalize DRAM as
+ * soon as we can so that we can place stack, malloc and BSS there.  We load
+ * U-Boot itself into memory at 0x80800000 for legacy reasons (to not conflict
+ * with older SPLs).  We have our BSS be placed 2MiB after this, to allow for
+ * the default Linux kernel address of 0x80008000 to work with most sized
+ * kernels, in the Falcon Mode case.  We have the SPL malloc pool at the end
+ * of the BSS area.  We suggest that the stack be placed at 32MiB after the
+ * start of DRAM to allow room for all of the above (handled in Kconfig).
  */
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE		0x80800000
@@ -233,6 +233,11 @@
 					 CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
 #endif
+#ifndef CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
+#endif
+
 
 /* RAW SD card / eMMC locations. */
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
index c54b7b5..33426c8 100644
--- a/include/configs/ti_omap3_common.h
+++ b/include/configs/ti_omap3_common.h
@@ -68,7 +68,6 @@
 
 /* SPL */
 #define CONFIG_SPL_TEXT_BASE		0x40200800
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index e6e88c5..8c88ebf 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -151,7 +151,6 @@
  * So moving TEXT_BASE down to non-HS limit.
  */
 #define CONFIG_SPL_TEXT_BASE		0x40300000
-#define CONFIG_SPL_MAX_SIZE		(0x4030C000 - CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SPL_DISPLAY_PRINT
 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index e42c88e..cbdf0bc 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -154,13 +154,6 @@
 #define CONFIG_SPL_TEXT_BASE	0x40300000
 #endif
 
-/* DRA7xx/AM57xx have 512K of SRAM, OMAP5 only 128K */
-#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
-#define TI_ROM_BOOT_LOAD_END		0x4037E000
-#else
-#define TI_ROM_BOOT_LOAD_END		0x4031E000
-#endif
-#define CONFIG_SPL_MAX_SIZE     (TI_ROM_BOOT_LOAD_END - CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SPL_DISPLAY_PRINT
 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index ae0e89c..e5d321a 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -338,7 +338,8 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
-#define CONFIG_SPL_MAX_SIZE		(57 * 1024)	/* 7 KB for stack */
+#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
+					 CONFIG_SPL_TEXT_BASE)
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000