arm: dts: dra7: sync DT with latest Linux
Sync all dra7* specific dts files with the upstream
kernel including changes queued for 4.14
https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v4.14/dt-v3
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/dts/dra71-evm.dts b/arch/arm/dts/dra71-evm.dts
index 875116c..41c9132 100644
--- a/arch/arm/dts/dra71-evm.dts
+++ b/arch/arm/dts/dra71-evm.dts
@@ -7,6 +7,7 @@
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
/ {
@@ -32,6 +33,16 @@
3000000 0x1>;
};
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&lp8732_buck0_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
poweroff: gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
@@ -138,6 +149,11 @@
};
};
+&pcf_lcd {
+ interrupt-parent = <&gpio7>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
&pcf_gpio_21 {
interrupt-parent = <&gpio7>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
@@ -157,9 +173,26 @@
};
&mmc1 {
- vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+ vqmmc-supply = <&vpo_sd_1v8_3v3>;
};
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+ vmmc-supply = <&evm_1v8_sw>;
+};
+
&mac {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
@@ -168,13 +201,13 @@
};
&cpsw_emac0 {
- phy-handle = <&dp83867_0>;
+ phy_id = <&davinci_mdio>, <2>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy-handle = <&dp83867_1>;
+ phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
@@ -185,7 +218,8 @@
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
- ti,impedance-control = <0x1f>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
};
dp83867_1: ethernet-phy@3 {
@@ -193,7 +227,8 @@
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
- ti,impedance-control = <0x1f>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
};
};