diff --git a/board/hisilicon/hikey960/README b/board/hisilicon/hikey960/README
new file mode 100644
index 0000000..e1e330d
--- /dev/null
+++ b/board/hisilicon/hikey960/README
@@ -0,0 +1,247 @@
+Introduction
+============
+
+HiKey960 is one of the 96Boards Consumer Edition board from HiSilicon.
+The board/SoC has: -
+* HiSilicon Kirin960 (HI3660) SoC with 4xCortex-A73 and 4xCortex-A53
+* ARM Mali G71 MP8 GPU
+* 3GB LPDDR4 SDRAM
+* 32GB UFS Flash Storage
+* microSD
+* 802.11a/b/g/n WiFi, Bluetooth
+
+More information about this board can be found in 96Boards website:
+https://www.96boards.org/product/hikey960/
+
+Currently the u-boot port supports: -
+* SD card
+
+Compile from source
+===================
+
+First get all the sources
+
+  > mkdir -p ~/hikey960/src ~/hikey960/bin
+  > cd ~/hikey960/src
+  > git clone https://github.com/ARM-software/arm-trusted-firmware
+  > git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
+  > git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
+  > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/config
+  > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hisi-sec_usb_xloader.img
+  > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hisi-sec_uce_boot.img
+  > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/sec_xloader.img
+  > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/recovery.bin
+  > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hikey_idt
+
+Get the SCP_BL2 lpm3.img binary. It is shipped as part of the UEFI source.
+The latest version can be obtained from the OpenPlatformPkg repo.
+
+  > cp OpenPlatformPkg/Platforms/Hisilicon/HiKey960/Binary/lpm3.img ~/hikey960/bin/
+
+Compile U-Boot
+==============
+
+  > cd ~/hikey960/src/u-boot
+  > make CROSS_COMPILE=aarch64-linux-gnu- hikey960_defconfig
+  > make CROSS_COMPILE=aarch64-linux-gnu-
+  > cp u-boot.bin ~/hikey960/bin/
+
+Compile ARM Trusted Firmware (ATF)
+==================================
+
+  > cd ~/hikey960/src/arm-trusted-firmware
+  > make CROSS_COMPILE=aarch64-linux-gnu- all fip \
+    SCP_BL2=~/hikey960/bin/lpm3.img \
+    BL33=~/hikey960/bin/u-boot.bin DEBUG=1 PLAT=hikey960
+
+Copy the resulting FIP binary
+  > cp build/hikey960/debug/fip.bin ~/hikey960/bin
+
+Compile l-loader
+================
+  > cd ~/hikey960/src/l-loader
+  > ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl1.bin
+  > ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl2.bin
+  > ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/fip.bin
+  > ln -sf ~/hikey960/bin/u-boot.bin
+  > make hikey960 PTABLE_LST=linux-32g NS_BL1U=u-boot.bin
+
+Copy the resulting binaries
+  > cp *.img ~/hikey960/bin
+  > cp l-loader.bin ~/hikey960/bin
+
+These instructions are adapted from
+https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey960.rst
+
+Setup Console
+=============
+
+Install ser2net. Use telnet as the console since UEFI in recovery mode
+output window fails to display in minicom.
+
+  > sudo apt-get install ser2net
+
+Configure ser2net
+
+  > sudo vi /etc/ser2net.conf
+
+Append one line for serial-over-USB in #ser2net.conf
+
+  > 2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner
+
+Start ser2net
+
+  > sudo killall ser2net
+  > sudo ser2net -u
+
+Open the console.
+
+  > telnet localhost 2004
+
+And you could open the console remotely, too.
+
+Flashing
+========
+
+1. Boot Hikey960 into recovery mode as per the below document:
+https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey960/installation/board-recovery.md
+
+Once Hikey960 is in recovery mode, flash the recovery binary:
+
+  > cd ~/hikey960/src
+  > chmod +x ./hikey_idt
+  > sudo ./hikey_idt -c config -p /dev/ttyUSB1
+
+Now move to the Hikey960 console and press `f` during UEFI boot. This
+will allow the board to boot into fastboot mode. Once the board is in
+fastboot mode, you should see the ID of the HiKey960 board using the
+following command
+
+  > sudo fastboot devices
+
+1ED3822A018E3372	fastboot
+
+3. Flash the images
+
+Now, the images can be flashed using fastboot:
+
+  > sudo fastboot flash ptable ~/hikey960/bin/prm_ptable.img
+  > sudo fastboot flash xloader ~/hikey960/bin/sec_xloader.img
+  > sudo fastboot flash fastboot ~/hikey960/bin/l-loader.bin
+  > sudo fastboot flash fip ~/hikey960/bin/fip.bin
+
+4. Set the "Boot Mode" switch to OFF position for normal boot mode.
+Then power on HiKey960
+
+Observe the console traces using UART6 on the Low Speed Expansion header:
+
+NOTICE:  BL2: v2.1(debug):v2.1-531-g3ee48f40
+NOTICE:  BL2: Built : 18:15:58, Aug  2 2019
+INFO:    BL2: Doing platform setup
+INFO:    UFS LUN0 contains 1024 blocks with 4096-byte size
+INFO:    UFS LUN1 contains 1024 blocks with 4096-byte size
+INFO:    UFS LUN2 contains 2048 blocks with 4096-byte size
+INFO:    UFS LUN3 contains 7805952 blocks with 4096-byte size
+INFO:    ufs: change power mode success
+INFO:    BL2: Loading image id 2
+INFO:    Loading image id=2 at address 0x89c80000
+INFO:    Image id=2 loaded: 0x89c80000 - 0x89cb5088
+INFO:    BL2: Initiating SCP_BL2 transfer to SCP
+INFO:    BL2: SCP_BL2: 0x89c80000@0x35088
+INFO:    BL2: SCP_BL2 HEAD:
+INFO:    BL2: SCP_BL2 0x7000 0x179 0x159 0x149
+INFO:    BL2: SCP_BL2 0x189 0x18b 0x18d 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x18f
+INFO:    BL2: SCP_BL2 0x191 0x0 0x193 0x195
+INFO:    BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
+INFO:    BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
+INFO:    BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
+INFO:    BL2: SCP_BL2 0x4d454355 0x43494741 0x424d554e 0x21215245
+INFO:    BL2: SCP_BL2 0x4a054904 0x42912000 0xf841bfbc 0xe7fa0b04
+INFO:    BL2: SCP_BL2 0xb88cf000 0x3b18 0x3d1c 0x6809493e
+INFO:    BL2: SCP_BL2 0x4613680a 0x201f102 0xf0002a04 0x600a804c
+INFO:    BL2: SCP_BL2 0x204f04f 0xf203fb02 0xf102440a 0x60100204
+INFO:    BL2: SCP_BL2 0x160f04f 0xf103fb01 0x68004834 0x61044408
+INFO:    BL2: SCP_BL2 0x61866145 0xf8c061c7 0xf8c08020 0xf8c09024
+INFO:    BL2: SCP_BL2 0xf8c0a028 0xf3efb02c 0xf3ef8208 0x68118309
+INFO:    BL2: SCP_BL2 0xf1026401 0xf0110204 0xbf070f04 0x46113220
+INFO:    BL2: SCP_BL2 TAIL:
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x19cad151 0x19b80040 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO:    BL2: SCP_BL2 transferred to SCP
+INFO:    start fw loading
+INFO:    fw load success
+WARNING: BL2: Platform setup already done!!
+INFO:    BL2: Loading image id 3
+INFO:    Loading image id=3 at address 0x1ac58000
+INFO:    Image id=3 loaded: 0x1ac58000 - 0x1ac63024
+INFO:    BL2: Loading image id 5
+INFO:    Loading image id=5 at address 0x1ac98000
+INFO:    Image id=5 loaded: 0x1ac98000 - 0x1ad0819c
+NOTICE:  BL2: Booting BL31
+INFO:    Entry point address = 0x1ac58000
+INFO:    SPSR = 0x3cd
+NOTICE:  BL31: v2.1(debug):v2.1-531-g3ee48f40
+NOTICE:  BL31: Built : 18:16:01, Aug  2 2019
+INFO:    ARM GICv2 driver initialized
+INFO:    BL31: Initializing runtime services
+INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied
+INFO:    plat_setup_psci_ops: sec_entrypoint=0x1ac580fc
+INFO:    BL31: Preparing for EL3 exit to normal world
+INFO:    Entry point address = 0x1ac98000
+INFO:    SPSR = 0x3c9
+
+
+U-Boot 2019.07-00628-g286f05a6fc-dirty (Aug 02 2019 - 17:14:05 +0530)
+Hikey960
+
+DRAM:  3 GiB
+PSCI:  v1.1
+MMC:   dwmmc1@ff37f000: 0
+Loading Environment from EXT4... ** File not found /uboot.env **
+
+** Unable to read "/uboot.env" from mmc0:2 **
+In:    serial@fff32000
+Out:   serial@fff32000
+Err:   serial@fff32000
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  0
+switch to partitions #0, OK
+mmc0 is current device
+Scanning mmc 0:1...
+Found /extlinux/extlinux.conf
+Retrieving file: /extlinux/extlinux.conf
+201 bytes read in 12 ms (15.6 KiB/s)
+1:      hikey960-kernel
+Retrieving file: /Image
+24689152 bytes read in 4377 ms (5.4 MiB/s)
+append: earlycon=pl011,mmio32,0xfff32000 console=ttyAMA6,115200 rw root=/dev/mmcblk0p2 rot
+Retrieving file: /hi3660-hikey960.dtb
+35047 bytes read in 14 ms (2.4 MiB/s)
+## Flattened Device Tree blob at 10000000
+   Booting using the fdt blob at 0x10000000
+   Using Device Tree in place at 0000000010000000, end 000000001000b8e6
+
+Starting kernel ...
+
+[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
+[    0.000000] Linux version 5.2.0-03138-gd75da80dce39 (mani@Mani-XPS-13-9360) (gcc versi9
+[    0.000000] Machine model: HiKey960
+[    0.000000] earlycon: pl11 at MMIO32 0x00000000fff32000 (options '')
+[    0.000000] printk: bootconsole [pl11] enabled
+[    0.000000] efi: Getting EFI parameters from FDT: