imx: mx6ul update soc related settings
1.Update WDOG settings.
2.No need to gate/ungate all PFDs for i.MX6UL.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index e80c09c..8ad8da8 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -316,11 +316,10 @@
{
struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
-
-#ifdef CONFIG_MX6SX
struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
- writew(enable, &wdog3->wmcr);
-#endif
+
+ if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
+ writew(enable, &wdog3->wmcr);
/* Write to the PDE (Power Down Enable) bit */
writew(enable, &wdog1->wmcr);
@@ -530,7 +529,7 @@
u32 mask528;
u32 reg, periph1, periph2;
- if (is_cpu_type(MXC_CPU_MX6SX))
+ if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
return;
/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs