rockchip: Pinebook Pro: Fix SPI flash and store env on it
Some minor fixes for SPI flash on the Pinebook Pro and also
default to saving environment to the SPI flash as it's
guaranteed to be on board.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
(applied with make savedefconfig)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
index 7334635..4d81b1f 100644
--- a/configs/pinebook-pro-rk3399_defconfig
+++ b/configs/pinebook-pro-rk3399_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_SIZE=0x8000
CONFIG_ROCKCHIP_RK3399=y
CONFIG_TARGET_PINEBOOK_PRO_RK3399=y
CONFIG_NR_DRAM_BANKS=1
@@ -9,7 +10,10 @@
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
CONFIG_BOOTDELAY=3
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="usb start"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb"
CONFIG_MISC_INIT_R=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -17,6 +21,7 @@
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
CONFIG_TPL=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
@@ -30,11 +35,12 @@
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_DM_KEYBOARD=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MISC=y
@@ -54,15 +60,13 @@
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RK8XX=y
-CONFIG_DM_RNG=y
-CONFIG_RNG_ROCKCHIP=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM_RK3399_LPDDR4=y
CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="usb start"
CONFIG_ROCKCHIP_SPI=y
CONFIG_SYSRESET=y
CONFIG_USB=y
@@ -74,7 +78,6 @@
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC3=y
CONFIG_ROCKCHIP_USB2_PHY=y
-CONFIG_DM_KEYBOARD=y
CONFIG_USB_KEYBOARD=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y