commit cecffaaca28cbbae513dd5b47984312c07931542
author Jagan Teki <jagan@amarulasolutions.com> Mon May 07 13:03:23 2018 +0530
committer Jagan Teki <jagan@amarulasolutions.com> Mon May 28 16:40:43 2018 +0530
tree ffb90de8ef5709987ce9a589acf1b790ae5822bd
parent 767a58e26f8c938be8191119c192aec0a7f8f79e

musb: sunxi: Use BIT instead of numerical shift

Use BIT is possible areas instead of numerical shift.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>

drivers/usb/musb-new/sunxi.c

diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index b473e2f..a33ebe5 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -93,9 +93,9 @@
 {
 	u32 temp = reg_val;
 
-	temp &= ~(1 << USBC_BP_ISCR_VBUS_CHANGE_DETECT);
-	temp &= ~(1 << USBC_BP_ISCR_ID_CHANGE_DETECT);
-	temp &= ~(1 << USBC_BP_ISCR_DPDM_CHANGE_DETECT);
+	temp &= ~BIT(USBC_BP_ISCR_VBUS_CHANGE_DETECT);
+	temp &= ~BIT(USBC_BP_ISCR_ID_CHANGE_DETECT);
+	temp &= ~BIT(USBC_BP_ISCR_DPDM_CHANGE_DETECT);
 
 	return temp;
 }
@@ -105,7 +105,7 @@
 	u32 reg_val;
 
 	reg_val = musb_readl(base, USBC_REG_o_ISCR);
-	reg_val |= (1 << USBC_BP_ISCR_ID_PULLUP_EN);
+	reg_val |= BIT(USBC_BP_ISCR_ID_PULLUP_EN);
 	reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
 	musb_writel(base, USBC_REG_o_ISCR, reg_val);
 }
@@ -115,7 +115,7 @@
 	u32 reg_val;
 
 	reg_val = musb_readl(base, USBC_REG_o_ISCR);
-	reg_val |= (1 << USBC_BP_ISCR_DPDM_PULLUP_EN);
+	reg_val |= BIT(USBC_BP_ISCR_DPDM_PULLUP_EN);
 	reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
 	musb_writel(base, USBC_REG_o_ISCR, reg_val);
 }
@@ -171,7 +171,7 @@
 	/* config usb fifo, 8kb mode */
 	reg_value = readl(SUNXI_SRAMC_BASE + 0x04);
 	reg_value &= ~(0x03 << 0);
-	reg_value |= (1 << 0);
+	reg_value |= BIT(0);
 	writel(reg_value, SUNXI_SRAMC_BASE + 0x04);
 }
 
@@ -275,15 +275,15 @@
 
 	musb->isr = sunxi_musb_interrupt;
 
-	setbits_le32(&glue->ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
+	setbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0));
 	if (glue->cfg->clkgate_bit)
 		setbits_le32(&glue->ccm->ahb_gate0,
-			     1 << glue->cfg->clkgate_bit);
+			     BIT(glue->cfg->clkgate_bit));
 #ifdef CONFIG_SUNXI_GEN_SUN6I
-	setbits_le32(&glue->ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
+	setbits_le32(&glue->ccm->ahb_reset0_cfg, BIT(AHB_GATE_OFFSET_USB0));
 	if (glue->cfg->rst_bit)
 		setbits_le32(&glue->ccm->ahb_reset0_cfg,
-			     1 << glue->cfg->rst_bit);
+			     BIT(glue->cfg->rst_bit));
 #endif
 
 	sunxi_usb_phy_init(0);
@@ -415,15 +415,15 @@
 
 	sunxi_usb_phy_exit(0);
 #ifdef CONFIG_SUNXI_GEN_SUN6I
-	clrbits_le32(&glue->ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
+	clrbits_le32(&glue->ccm->ahb_reset0_cfg, BIT(AHB_GATE_OFFSET_USB0));
 	if (glue->cfg->rst_bit)
 		clrbits_le32(&glue->ccm->ahb_reset0_cfg,
-			     1 << glue->cfg->rst_bit);
+			     BIT(glue->cfg->rst_bit));
 #endif
-	clrbits_le32(&glue->ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
+	clrbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0));
 	if (glue->cfg->clkgate_bit)
 		clrbits_le32(&glue->ccm->ahb_gate0,
-			     1 << glue->cfg->clkgate_bit);
+			     BIT(glue->cfg->clkgate_bit));
 
 	free(host->host);
 	host->host = NULL;