board/freescale/m5329evb/mii.c - filogic/uboot - Gitiles

 /*
  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <asm/fec.h>
 #include <asm/immap.h>

 #include <config.h>
 #include <net.h>

 DECLARE_GLOBAL_DATA_PTR;

 #if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
 #undef MII_DEBUG
 #undef ET_DEBUG

 int fecpin_setclear(struct eth_device *dev, int setclear)
 {
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;

 	if (setclear) {
 		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
 		gpio->par_feci2c |=
 		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
 	} else {
 		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
 		gpio->par_feci2c &=
 		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
 	}
 	return 0;
 }

 #if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
 #include <miiphy.h>

 /* Make MII read/write commands for the FEC. */
 #define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))

 #define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))

 /* PHY identification */
 #define PHY_ID_LXT970		0x78100000	/* LXT970 */
 #define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
 #define PHY_ID_82555		0x02a80150	/* Intel 82555 */
 #define PHY_ID_QS6612		0x01814400	/* QS6612 */
 #define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
 #define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
 #define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
 #define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
 #define PHY_ID_DP83849		0x20005CA2	/* National 82849 */

 #define STR_ID_LXT970		"LXT970"
 #define STR_ID_LXT971		"LXT971"
 #define STR_ID_82555		"Intel82555"
 #define STR_ID_QS6612		"QS6612"
 #define STR_ID_AMD79C784	"AMD79C784"
 #define STR_ID_LSI80225		"LSI80225"
 #define STR_ID_LSI80225B	"LSI80225/B"
 #define STR_ID_DP83848VV	"N83848"
 #define STR_ID_DP83849		"N83849"

 /****************************************************************************
  * mii_init -- Initialize the MII for MII command without ethernet
  * This function is a subset of eth_init
  ****************************************************************************
  */
 void mii_reset(struct fec_info_s *info)
 {
 	volatile fec_t *fecp = (fec_t *) (info->miibase);
 	int i;

 	fecp->ecr = FEC_ECR_RESET;
 	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
 		udelay(1);
 	}
 	if (i == FEC_RESET_DELAY) {
 		printf("FEC_RESET_DELAY timeout\n");
 	}
 }

 /* send command to phy using mii, wait for result */
 uint mii_send(uint mii_cmd)
 {
 	struct fec_info_s *info;
 	struct eth_device *dev;
 	volatile fec_t *ep;
 	uint mii_reply;
 	int j = 0;

 	/* retrieve from register structure */
 	dev = eth_get_dev();
 	info = dev->priv;

 	ep = (fec_t *) info->miibase;

 	ep->mmfr = mii_cmd;	/* command to phy */

 	/* wait for mii complete */
 	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
 		udelay(1);
 		j++;
 	}
 	if (j >= MCFFEC_TOUT_LOOP) {
 		printf("MII not complete\n");
 		return -1;
 	}

 	mii_reply = ep->mmfr;	/* result from phy */
 	ep->eir = FEC_EIR_MII;	/* clear MII complete */
 #ifdef ET_DEBUG
 	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
 	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
 #endif

 	return (mii_reply & 0xffff);	/* data read from phy */
 }
 #endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */

 #if defined(CFG_DISCOVER_PHY)
 int mii_discover_phy(struct eth_device *dev)
 {
 #define MAX_PHY_PASSES 11
 	struct fec_info_s *info = dev->priv;
 	int phyaddr, pass;
 	uint phyno, phytype;

 	if (info->phyname_init)
 		return info->phy_addr;

 	phyaddr = -1;		/* didn't find a PHY yet */
 	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
 		if (pass > 1) {
 			/* PHY may need more time to recover from reset.
 			 * The LXT970 needs 50ms typical, no maximum is
 			 * specified, so wait 10ms before try again.
 			 * With 11 passes this gives it 100ms to wake up.
 			 */
 			udelay(10000);	/* wait 10ms */
 		}

 		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {

 			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
 #ifdef ET_DEBUG
 			printf("PHY type 0x%x pass %d type\n", phytype, pass);
 #endif
 			if (phytype != 0xffff) {
 				phyaddr = phyno;
 				phytype <<= 16;
 				phytype |=
 				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));

 				switch (phytype & 0xffffffff) {
 				case PHY_ID_DP83848VV:
 					strcpy(info->phy_name,
 					       STR_ID_DP83848VV);
 					info->phyname_init = 1;
 					break;
 				default:
 					strcpy(info->phy_name, "unknown");
 					info->phyname_init = 1;
 					break;
 				}

 #ifdef ET_DEBUG
 				printf("PHY @ 0x%x pass %d type ", phyno, pass);
 				switch (phytype & 0xffffffff) {
 				case PHY_ID_DP83848VV:
 					printf(STR_ID_DP83848VV);
 					break;
 				default:
 					printf("0x%08x\n", phytype);
 					break;
 				}
 #endif
 			}
 		}
 	}
 	if (phyaddr < 0)
 		printf("No PHY device found.\n");

 	return phyaddr;
 }
 #endif				/* CFG_DISCOVER_PHY */

 int mii_init(void) __attribute__((weak,alias("__mii_init")));

 void __mii_init(void)
 {
 	volatile fec_t *fecp;
 	struct fec_info_s *info;
 	struct eth_device *dev;
 	int miispd = 0, i = 0;
 	u16 autoneg = 0;

 	/* retrieve from register structure */
 	dev = eth_get_dev();
 	info = dev->priv;

 	fecp = (fec_t *) info->miibase;

 	fecpin_setclear(dev, 1);

 	mii_reset(info);

 	/* We use strictly polling mode only */
 	fecp->eimr = 0;

 	/* Clear any pending interrupt */
 	fecp->eir = 0xffffffff;

 	/* Set MII speed */
 	miispd = (gd->bus_clk / 1000000) / 5;
 	fecp->mscr = miispd << 1;

 	info->phy_addr = mii_discover_phy(dev);

 #define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
 	while (i < MCFFEC_TOUT_LOOP) {
 		autoneg = 0;
 		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
 		i++;

 		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
 			break;

 		udelay(500);
 	}
 	if (i >= MCFFEC_TOUT_LOOP) {
 		printf("Auto Negotiation not complete\n");
 	}

 	/* adapt to the half/full speed settings */
 	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
 	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
 }

 /*****************************************************************************
  * Read and write a MII PHY register, routines used by MII Utilities
  *
  * FIXME: These routines are expected to return 0 on success, but mii_send
  *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
  *	  no PHY connected...
  *	  For now always return 0.
  * FIXME: These routines only work after calling eth_init() at least once!
  *	  Otherwise they hang in mii_send() !!! Sorry!
  *****************************************************************************/

 int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
 		       unsigned short *value)
 {
 	short rdreg;		/* register working value */

 #ifdef MII_DEBUG
 	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
 #endif
 	rdreg = mii_send(mk_mii_read(addr, reg));

 	*value = rdreg;

 #ifdef MII_DEBUG
 	printf("0x%04x\n", *value);
 #endif

 	return 0;
 }

 int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
 			unsigned short value)
 {
 	short rdreg;		/* register working value */

 #ifdef MII_DEBUG
 	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
 #endif

 	rdreg = mii_send(mk_mii_write(addr, reg, value));

 #ifdef MII_DEBUG
 	printf("0x%04x\n", value);
 #endif

 	return 0;
 }

 #endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
	/*
	* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
	* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <asm/fec.h>
	#include <asm/immap.h>

	#include <config.h>
	#include <net.h>

	DECLARE_GLOBAL_DATA_PTR;

	#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
	#undef MII_DEBUG
	#undef ET_DEBUG

	int fecpin_setclear(struct eth_device *dev, int setclear)
	{
	volatile gpio_t gpio = (gpio_t ) MMAP_GPIO;

	if (setclear) {
	gpio->par_fec \|= GPIO_PAR_FEC_7W_FEC \| GPIO_PAR_FEC_MII_FEC;
	gpio->par_feci2c \|=
	GPIO_PAR_FECI2C_MDC_EMDC \| GPIO_PAR_FECI2C_MDIO_EMDIO;
	} else {
	gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC \| GPIO_PAR_FEC_MII_FEC);
	gpio->par_feci2c &=
	~(GPIO_PAR_FECI2C_MDC_EMDC \| GPIO_PAR_FECI2C_MDIO_EMDIO);
	}
	return 0;
	}

	#if defined(CFG_DISCOVER_PHY) \|\| defined(CONFIG_CMD_MII)
	#include <miiphy.h>

	/* Make MII read/write commands for the FEC. */
	#define mk_mii_read(ADDR, REG) (0x60020000 \| ((ADDR << 23) \| (REG & 0x1f) << 18))

	#define mk_mii_write(ADDR, REG, VAL) (0x50020000 \| ((ADDR << 23) \| (REG & 0x1f) << 18) \| (VAL & 0xffff))

	/* PHY identification */
	#define PHY_ID_LXT970 0x78100000 /* LXT970 */
	#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
	#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
	#define PHY_ID_QS6612 0x01814400 /* QS6612 */
	#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
	#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
	#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
	#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */
	#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */

	#define STR_ID_LXT970 "LXT970"
	#define STR_ID_LXT971 "LXT971"
	#define STR_ID_82555 "Intel82555"
	#define STR_ID_QS6612 "QS6612"
	#define STR_ID_AMD79C784 "AMD79C784"
	#define STR_ID_LSI80225 "LSI80225"
	#define STR_ID_LSI80225B "LSI80225/B"
	#define STR_ID_DP83848VV "N83848"
	#define STR_ID_DP83849 "N83849"

	/****************************************************************************
	* mii_init -- Initialize the MII for MII command without ethernet
	* This function is a subset of eth_init
	****************************************************************************
	*/
	void mii_reset(struct fec_info_s *info)
	{
	volatile fec_t fecp = (fec_t ) (info->miibase);
	int i;

	fecp->ecr = FEC_ECR_RESET;
	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
	udelay(1);
	}
	if (i == FEC_RESET_DELAY) {
	printf("FEC_RESET_DELAY timeout\n");
	}
	}

	/* send command to phy using mii, wait for result */
	uint mii_send(uint mii_cmd)
	{
	struct fec_info_s *info;
	struct eth_device *dev;
	volatile fec_t *ep;
	uint mii_reply;
	int j = 0;

	/* retrieve from register structure */
	dev = eth_get_dev();
	info = dev->priv;

	ep = (fec_t *) info->miibase;

	ep->mmfr = mii_cmd; /* command to phy */

	/* wait for mii complete */
	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
	udelay(1);
	j++;
	}
	if (j >= MCFFEC_TOUT_LOOP) {
	printf("MII not complete\n");
	return -1;
	}

	mii_reply = ep->mmfr; /* result from phy */
	ep->eir = FEC_EIR_MII; /* clear MII complete */
	#ifdef ET_DEBUG
	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
	__FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
	#endif

	return (mii_reply & 0xffff); /* data read from phy */
	}
	#endif /* CFG_DISCOVER_PHY \|\| CONFIG_CMD_MII */

	#if defined(CFG_DISCOVER_PHY)
	int mii_discover_phy(struct eth_device *dev)
	{
	#define MAX_PHY_PASSES 11
	struct fec_info_s *info = dev->priv;
	int phyaddr, pass;
	uint phyno, phytype;

	if (info->phyname_init)
	return info->phy_addr;

	phyaddr = -1; /* didn't find a PHY yet */
	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
	if (pass > 1) {
	/* PHY may need more time to recover from reset.
	* The LXT970 needs 50ms typical, no maximum is
	* specified, so wait 10ms before try again.
	* With 11 passes this gives it 100ms to wake up.
	*/
	udelay(10000); /* wait 10ms */
	}

	for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {

	phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
	#ifdef ET_DEBUG
	printf("PHY type 0x%x pass %d type\n", phytype, pass);
	#endif
	if (phytype != 0xffff) {
	phyaddr = phyno;
	phytype <<= 16;
	phytype \|=
	mii_send(mk_mii_read(phyno, PHY_PHYIDR2));

	switch (phytype & 0xffffffff) {
	case PHY_ID_DP83848VV:
	strcpy(info->phy_name,
	STR_ID_DP83848VV);
	info->phyname_init = 1;
	break;
	default:
	strcpy(info->phy_name, "unknown");
	info->phyname_init = 1;
	break;
	}

	#ifdef ET_DEBUG
	printf("PHY @ 0x%x pass %d type ", phyno, pass);
	switch (phytype & 0xffffffff) {
	case PHY_ID_DP83848VV:
	printf(STR_ID_DP83848VV);
	break;
	default:
	printf("0x%08x\n", phytype);
	break;
	}
	#endif
	}
	}
	}
	if (phyaddr < 0)
	printf("No PHY device found.\n");

	return phyaddr;
	}
	#endif /* CFG_DISCOVER_PHY */

	int mii_init(void) __attribute__((weak,alias("__mii_init")));

	void __mii_init(void)
	{
	volatile fec_t *fecp;
	struct fec_info_s *info;
	struct eth_device *dev;
	int miispd = 0, i = 0;
	u16 autoneg = 0;

	/* retrieve from register structure */
	dev = eth_get_dev();
	info = dev->priv;

	fecp = (fec_t *) info->miibase;

	fecpin_setclear(dev, 1);

	mii_reset(info);

	/* We use strictly polling mode only */
	fecp->eimr = 0;

	/* Clear any pending interrupt */
	fecp->eir = 0xffffffff;

	/* Set MII speed */
	miispd = (gd->bus_clk / 1000000) / 5;
	fecp->mscr = miispd << 1;

	info->phy_addr = mii_discover_phy(dev);

	#define AUTONEGLINK (PHY_BMSR_AUTN_COMP \| PHY_BMSR_LS)
	while (i < MCFFEC_TOUT_LOOP) {
	autoneg = 0;
	miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
	i++;

	if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
	break;

	udelay(500);
	}
	if (i >= MCFFEC_TOUT_LOOP) {
	printf("Auto Negotiation not complete\n");
	}

	/* adapt to the half/full speed settings */
	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
	info->dup_spd \|= miiphy_speed(dev->name, info->phy_addr);
	}

	/*****************************************************************************
	* Read and write a MII PHY register, routines used by MII Utilities
	*
	* FIXME: These routines are expected to return 0 on success, but mii_send
	* does _not_ return an error code. Maybe 0xFFFF means error, i.e.
	* no PHY connected...
	* For now always return 0.
	* FIXME: These routines only work after calling eth_init() at least once!
	* Otherwise they hang in mii_send() !!! Sorry!
	*****************************************************************************/

	int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
	unsigned short *value)
	{
	short rdreg; /* register working value */

	#ifdef MII_DEBUG
	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
	#endif
	rdreg = mii_send(mk_mii_read(addr, reg));

	*value = rdreg;

	#ifdef MII_DEBUG
	printf("0x%04x\n", *value);
	#endif

	return 0;
	}

	int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
	unsigned short value)
	{
	short rdreg; /* register working value */

	#ifdef MII_DEBUG
	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
	#endif

	rdreg = mii_send(mk_mii_write(addr, reg, value));

	#ifdef MII_DEBUG
	printf("0x%04x\n", value);
	#endif

	return 0;
	}

	#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */