commit cdc6f65720e17d6ed72161b03ccc6b44842580d3
author Masahiro Yamada <yamada.masahiro@socionext.com> Wed Dec 19 20:03:20 2018 +0900
committer Masahiro Yamada <yamada.masahiro@socionext.com> Sat Dec 29 11:38:38 2018 +0900
tree 6aa03fa40583e3abbfc9a0accfca1b5c4a016b0a
parent 9ea2397873e9df9551a78d4f4e116a85a868b580

clk: uniphier: add NAND 200MHz clock

The Denali NAND controller IP needs three clocks:

 - clk: controller core clock

 - clk_x: bus interface clock

 - ecc_clk: clock at which ECC circuitry is run

Currently, only the first one (50MHz) is provided.  The rest of the
two clock ports must be connected to the 200MHz clock line.  Add this.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

drivers/clk/uniphier/clk-uniphier-sys.c

diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
index 9e087b6..487b43e 100644
--- a/drivers/clk/uniphier/clk-uniphier-sys.c
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -6,13 +6,12 @@
 
 #include "clk-uniphier.h"
 
-/* Denali driver requires clk_x rate (clk: 50MHz, clk_x & ecc_clk: 200MHz) */
 #define UNIPHIER_LD4_SYS_CLK_NAND(_id)					\
-	UNIPHIER_CLK_RATE(128, 200000000),				\
+	UNIPHIER_CLK_RATE(128, 50000000),				\
 	UNIPHIER_CLK_GATE((_id), 128, 0x2104, 2)
 
 #define UNIPHIER_LD11_SYS_CLK_NAND(_id)					\
-	UNIPHIER_CLK_RATE(128, 200000000),				\
+	UNIPHIER_CLK_RATE(128, 50000000),				\
 	UNIPHIER_CLK_GATE((_id), 128, 0x210c, 0)
 
 const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
@@ -20,6 +19,7 @@
     defined(CONFIG_ARCH_UNIPHIER_PRO4) || defined(CONFIG_ARCH_UNIPHIER_PRO5) ||\
     defined(CONFIG_ARCH_UNIPHIER_PXS2) || defined(CONFIG_ARCH_UNIPHIER_LD6B)
 	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_CLK_RATE(3, 200000000),
 	UNIPHIER_CLK_GATE_SIMPLE(6, 0x2104, 12),	/* ether (Pro4, PXs2) */
 	UNIPHIER_CLK_GATE_SIMPLE(7, 0x2104, 5),		/* ether-gb (Pro4) */
 	UNIPHIER_CLK_GATE_SIMPLE(8, 0x2104, 10),	/* stdmac */
@@ -36,6 +36,7 @@
 const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
 #if defined(CONFIG_ARCH_UNIPHIER_LD11) || defined(CONFIG_ARCH_UNIPHIER_LD20)
 	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_CLK_RATE(3, 200000000),
 	UNIPHIER_CLK_GATE_SIMPLE(6, 0x210c, 6),		/* ether */
 	UNIPHIER_CLK_GATE_SIMPLE(8, 0x210c, 8),		/* stdmac */
 	UNIPHIER_CLK_GATE_SIMPLE(14, 0x210c, 14),	/* usb30 (LD20) */
@@ -48,6 +49,7 @@
 const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
 #if defined(CONFIG_ARCH_UNIPHIER_PXS3)
 	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_CLK_RATE(3, 200000000),
 	UNIPHIER_CLK_GATE_SIMPLE(6, 0x210c, 9),		/* ether0 */
 	UNIPHIER_CLK_GATE_SIMPLE(7, 0x210c, 10),	/* ether1 */
 	UNIPHIER_CLK_GATE_SIMPLE(12, 0x210c, 4),	/* usb30 (gio0) */