spi: pl022: Simplify platdata code
pl022 spi driver support both OF_CONTROL and PLATDATA, this
patch is trying to simplify the code that differentiating
platdata vs of_control.
- Move OF_CONTROL code at one place
- Handle clock setup code directly in pl022_spi_ofdata_to_platdata
Acked-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c
index 86b71d2..05f4f6f 100644
--- a/drivers/spi/pl022_spi.c
+++ b/drivers/spi/pl022_spi.c
@@ -72,11 +72,7 @@
struct pl022_spi_slave {
void *base;
-#if !CONFIG_IS_ENABLED(OF_PLATDATA)
- struct clk clk;
-#else
unsigned int freq;
-#endif
};
/*
@@ -95,19 +91,6 @@
return 0;
}
-
-#if !CONFIG_IS_ENABLED(OF_PLATDATA)
-static int pl022_spi_ofdata_to_platdata(struct udevice *bus)
-{
- struct pl022_spi_pdata *plat = bus->platdata;
- const void *fdt = gd->fdt_blob;
- int node = dev_of_offset(bus);
-
- plat->addr = fdtdec_get_addr_size(fdt, node, "reg", &plat->size);
-
- return clk_get_by_index(bus, 0, &plat->clk);
-}
-#endif
static int pl022_spi_probe(struct udevice *bus)
{
@@ -115,11 +98,7 @@
struct pl022_spi_slave *ps = dev_get_priv(bus);
ps->base = ioremap(plat->addr, plat->size);
-#if !CONFIG_IS_ENABLED(OF_PLATDATA)
- ps->clk = plat->clk;
-#else
ps->freq = plat->freq;
-#endif
/* Check the PL022 version */
if (!pl022_is_supported(ps))
@@ -240,11 +219,7 @@
u16 scr = SSP_SCR_MIN, cr0 = 0, cpsr = SSP_CPSR_MIN, best_scr = scr,
best_cpsr = cpsr;
u32 min, max, best_freq = 0, tmp;
-#if !CONFIG_IS_ENABLED(OF_PLATDATA)
- u32 rate = clk_get_rate(&ps->clk);
-#else
u32 rate = ps->freq;
-#endif
bool found = false;
max = spi_rate(rate, SSP_CPSR_MIN, SSP_SCR_MIN);
@@ -316,6 +291,25 @@
};
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+static int pl022_spi_ofdata_to_platdata(struct udevice *bus)
+{
+ struct pl022_spi_pdata *plat = bus->platdata;
+ const void *fdt = gd->fdt_blob;
+ int node = dev_of_offset(bus);
+ struct clk clkdev;
+ int ret;
+
+ plat->addr = fdtdec_get_addr_size(fdt, node, "reg", &plat->size);
+
+ ret = clk_get_by_index(bus, 0, &clkdev);
+ if (ret)
+ return ret;
+
+ plat->freq = clk_get_rate(&clkdev);
+
+ return 0;
+}
+
static const struct udevice_id pl022_spi_ids[] = {
{ .compatible = "arm,pl022-spi" },
{ }
@@ -327,11 +321,9 @@
.id = UCLASS_SPI,
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
.of_match = pl022_spi_ids,
-#endif
- .ops = &pl022_spi_ops,
-#if !CONFIG_IS_ENABLED(OF_PLATDATA)
.ofdata_to_platdata = pl022_spi_ofdata_to_platdata,
#endif
+ .ops = &pl022_spi_ops,
.platdata_auto_alloc_size = sizeof(struct pl022_spi_pdata),
.priv_auto_alloc_size = sizeof(struct pl022_spi_slave),
.probe = pl022_spi_probe,
diff --git a/include/dm/platform_data/pl022_spi.h b/include/dm/platform_data/pl022_spi.h
index 77fe6da..df88701 100644
--- a/include/dm/platform_data/pl022_spi.h
+++ b/include/dm/platform_data/pl022_spi.h
@@ -10,19 +10,12 @@
#ifndef __PL022_SPI_H__
#define __PL022_SPI_H__
-#if !CONFIG_IS_ENABLED(OF_PLATDATA)
-#include <clk.h>
-#endif
#include <fdtdec.h>
struct pl022_spi_pdata {
fdt_addr_t addr;
fdt_size_t size;
-#if !CONFIG_IS_ENABLED(OF_PLATDATA)
- struct clk clk;
-#else
unsigned int freq;
-#endif
};
#endif