sc_sps_1: Adjust board config to use 'mxs' SoC code
Fix build failure due the move of mx28 code to 'mxs' SoC.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Stefano Babic <sbabic@denx.de>
diff --git a/board/schulercontrol/sc_sps_1/sc_sps_1.c b/board/schulercontrol/sc_sps_1/sc_sps_1.c
index 0fee289..5f58e0b 100644
--- a/board/schulercontrol/sc_sps_1/sc_sps_1.c
+++ b/board/schulercontrol/sc_sps_1/sc_sps_1.c
@@ -85,8 +85,8 @@
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
- struct mx28_clkctrl_regs *clkctrl_regs =
- (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
int ret;
ret = cpu_eth_init(bis);
diff --git a/board/schulercontrol/sc_sps_1/spl_boot.c b/board/schulercontrol/sc_sps_1/spl_boot.c
index 4d2151d..7fcbc18 100644
--- a/board/schulercontrol/sc_sps_1/spl_boot.c
+++ b/board/schulercontrol/sc_sps_1/spl_boot.c
@@ -156,10 +156,10 @@
void board_init_ll(void)
{
- mx28_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
+ mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
}
-void mx28_adjust_memory_params(uint32_t *dram_vals)
+void mxs_adjust_memory_params(uint32_t *dram_vals)
{
dram_vals[0x74 >> 2] = 0x0f02010a;
}
diff --git a/boards.cfg b/boards.cfg
index ef476d3..0837c16 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -182,7 +182,7 @@
apx4devkit arm arm926ejs apx4devkit bluegiga mxs apx4devkit
m28evk arm arm926ejs m28evk denx mxs m28evk
mx28evk arm arm926ejs mx28evk freescale mxs mx28evk
-sc_sps_1 arm arm926ejs - schulercontrol mx28
+sc_sps_1 arm arm926ejs sc_sps_1 schulercontrol mxs
nhk8815 arm arm926ejs nhk8815 st nomadik
nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND
omap5912osk arm arm926ejs - ti omap
diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h
index 4feb271..f0b6f2b 100644
--- a/include/configs/sc_sps_1.h
+++ b/include/configs/sc_sps_1.h
@@ -54,8 +54,8 @@
*/
#define CONFIG_SPL
#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mx28"
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds"
+#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT