x86: ivybridge: Add SATA init
Add code to set up the SATA interfaces on boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/x86/cpu/ivybridge/sata.c b/arch/x86/cpu/ivybridge/sata.c
new file mode 100644
index 0000000..bbcd47d
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/sata.c
@@ -0,0 +1,225 @@
+/*
+ * From Coreboot
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/bd82x6x.h>
+
+static inline u32 sir_read(pci_dev_t dev, int idx)
+{
+ pci_write_config32(dev, SATA_SIRI, idx);
+ return pci_read_config32(dev, SATA_SIRD);
+}
+
+static inline void sir_write(pci_dev_t dev, int idx, u32 value)
+{
+ pci_write_config32(dev, SATA_SIRI, idx);
+ pci_write_config32(dev, SATA_SIRD, value);
+}
+
+static void common_sata_init(pci_dev_t dev, unsigned int port_map)
+{
+ u32 reg32;
+ u16 reg16;
+
+ /* Set IDE I/O Configuration */
+ reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+ pci_write_config32(dev, IDE_CONFIG, reg32);
+
+ /* Port enable */
+ reg16 = pci_read_config16(dev, 0x92);
+ reg16 &= ~0x3f;
+ reg16 |= port_map;
+ pci_write_config16(dev, 0x92, reg16);
+
+ /* SATA Initialization register */
+ port_map &= 0xff;
+ pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
+}
+
+void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
+{
+ unsigned int port_map, speed_support, port_tx;
+ struct pci_controller *hose = pci_bus_to_hose(0);
+ const char *mode;
+ u32 reg32;
+ u16 reg16;
+
+ debug("SATA: Initializing...\n");
+
+ /* SATA configuration */
+ port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
+ speed_support = fdtdec_get_int(blob, node,
+ "sata_interface_speed_support", 0);
+
+ /* Enable BARs */
+ pci_write_config16(dev, PCI_COMMAND, 0x0007);
+
+ mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
+ if (!mode || !strcmp(mode, "ahci")) {
+ u32 abar;
+
+ debug("SATA: Controller in AHCI mode\n");
+
+ /* Set Interrupt Line, Interrupt Pin is set by D31IP.PIP */
+ pci_write_config8(dev, INTR_LN, 0x0a);
+
+ /* Set timings */
+ pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
+ IDE_PPE0 | IDE_IE0 | IDE_TIME0);
+ pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
+
+ /* Sync DMA */
+ pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
+ pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
+
+ common_sata_init(dev, 0x8000 | port_map);
+
+ /* Initialize AHCI memory-mapped space */
+ abar = pci_read_bar32(hose, dev, 5);
+ debug("ABAR: %08X\n", abar);
+ /* CAP (HBA Capabilities) : enable power management */
+ reg32 = readl(abar + 0x00);
+ reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */
+ reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */
+ /* Set ISS, if available */
+ if (speed_support) {
+ reg32 &= ~0x00f00000;
+ reg32 |= (speed_support & 0x03) << 20;
+ }
+ writel(reg32, abar + 0x00);
+ /* PI (Ports implemented) */
+ writel(port_map, abar + 0x0c);
+ (void) readl(abar + 0x0c); /* Read back 1 */
+ (void) readl(abar + 0x0c); /* Read back 2 */
+ /* CAP2 (HBA Capabilities Extended)*/
+ reg32 = readl(abar + 0x24);
+ reg32 &= ~0x00000002;
+ writel(reg32, abar + 0x24);
+ /* VSP (Vendor Specific Register */
+ reg32 = readl(abar + 0xa0);
+ reg32 &= ~0x00000005;
+ writel(reg32, abar + 0xa0);
+ } else if (!strcmp(mode, "combined")) {
+ debug("SATA: Controller in combined mode\n");
+
+ /* No AHCI: clear AHCI base */
+ pci_write_bar32(hose, dev, 5, 0x00000000);
+ /* And without AHCI BAR no memory decoding */
+ reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 &= ~PCI_COMMAND_MEMORY;
+ pci_write_config16(dev, PCI_COMMAND, reg16);
+
+ pci_write_config8(dev, 0x09, 0x80);
+
+ /* Set timings */
+ pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
+ pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
+ IDE_PPE0 | IDE_IE0 | IDE_TIME0);
+
+ /* Sync DMA */
+ pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
+ pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
+
+ common_sata_init(dev, port_map);
+ } else {
+ debug("SATA: Controller in plain-ide mode\n");
+
+ /* No AHCI: clear AHCI base */
+ pci_write_bar32(hose, dev, 5, 0x00000000);
+
+ /* And without AHCI BAR no memory decoding */
+ reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 &= ~PCI_COMMAND_MEMORY;
+ pci_write_config16(dev, PCI_COMMAND, reg16);
+
+ /*
+ * Native mode capable on both primary and secondary (0xa)
+ * OR'ed with enabled (0x50) = 0xf
+ */
+ pci_write_config8(dev, 0x09, 0x8f);
+
+ /* Set Interrupt Line */
+ /* Interrupt Pin is set by D31IP.PIP */
+ pci_write_config8(dev, INTR_LN, 0xff);
+
+ /* Set timings */
+ pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+ IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
+ IDE_PPE0 | IDE_IE0 | IDE_TIME0);
+ pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+ IDE_SITRE | IDE_ISP_3_CLOCKS |
+ IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
+
+ /* Sync DMA */
+ pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
+ pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
+
+ common_sata_init(dev, port_map);
+ }
+
+ /* Set Gen3 Transmitter settings if needed */
+ port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0);
+ if (port_tx)
+ pch_iobp_update(SATA_IOBP_SP0G3IR, 0, port_tx);
+
+ port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0);
+ if (port_tx)
+ pch_iobp_update(SATA_IOBP_SP1G3IR, 0, port_tx);
+
+ /* Additional Programming Requirements */
+ sir_write(dev, 0x04, 0x00001600);
+ sir_write(dev, 0x28, 0xa0000033);
+ reg32 = sir_read(dev, 0x54);
+ reg32 &= 0xff000000;
+ reg32 |= 0x5555aa;
+ sir_write(dev, 0x54, reg32);
+ sir_write(dev, 0x64, 0xcccc8484);
+ reg32 = sir_read(dev, 0x68);
+ reg32 &= 0xffff0000;
+ reg32 |= 0xcccc;
+ sir_write(dev, 0x68, reg32);
+ reg32 = sir_read(dev, 0x78);
+ reg32 &= 0x0000ffff;
+ reg32 |= 0x88880000;
+ sir_write(dev, 0x78, reg32);
+ sir_write(dev, 0x84, 0x001c7000);
+ sir_write(dev, 0x88, 0x88338822);
+ sir_write(dev, 0xa0, 0x001c7000);
+ sir_write(dev, 0xc4, 0x0c0c0c0c);
+ sir_write(dev, 0xc8, 0x0c0c0c0c);
+ sir_write(dev, 0xd4, 0x10000000);
+
+ pch_iobp_update(0xea004001, 0x3fffffff, 0xc0000000);
+ pch_iobp_update(0xea00408a, 0xfffffcff, 0x00000100);
+}
+
+void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node)
+{
+ unsigned port_map;
+ const char *mode;
+ u16 map = 0;
+
+ /*
+ * Set SATA controller mode early so the resource allocator can
+ * properly assign IO/Memory resources for the controller.
+ */
+ mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
+ if (mode && !strcmp(mode, "ahci"))
+ map = 0x0060;
+ port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
+
+ map |= (port_map ^ 0x3f) << 8;
+ pci_write_config16(dev, 0x90, map);
+}