board/v38b/v38b.c - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2003-2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2004
  * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <mpc5xxx.h>
 #include <asm/processor.h>


 #ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start(int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;

 	/* unlock mode register */
 	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
 	__asm__ volatile ("sync");

 	/* precharge all banks */
 	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
 	__asm__ volatile ("sync");

 #if SDRAM_DDR
 	/* set mode register: extended mode */
 	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
 	__asm__ volatile ("sync");

 	/* set mode register: reset DLL */
 	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
 	__asm__ volatile ("sync");
 #endif /* SDRAM_DDR */

 	/* precharge all banks */
 	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
 	__asm__ volatile ("sync");

 	/* auto refresh */
 	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
 	__asm__ volatile ("sync");

 	/* set mode register */
 	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
 	__asm__ volatile ("sync");

 	/* normal operation */
 	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
 	__asm__ volatile ("sync");
 }
 #endif /* !CONFIG_SYS_RAMBOOT */


 phys_size_t initdram(int board_type)
 {
 	ulong dramsize = 0;
 	ulong dramsize2 = 0;
 	uint svr, pvr;

 #ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;

 	/* setup SDRAM chip selects */
 	*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
 	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
 	__asm__ volatile ("sync");

 	/* setup config registers */
 	*(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
 	*(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
 	__asm__ volatile ("sync");

 #if SDRAM_DDR
 	/* set tap delay */
 	*(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
 	__asm__ volatile ("sync");
 #endif /* SDRAM_DDR */

 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
 	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
 	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
 	} else
 		dramsize = test2;

 	/* memory smaller than 1MB is impossible */
 	if (dramsize < (1 << 20))
 		dramsize = 0;

 	/* set SDRAM CS0 size according to the amount of RAM found */
 	if (dramsize > 0)
 		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
 	else
 		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */

 	/* let SDRAM CS1 start right after CS0 */
 	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */

 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
 	test2 = test1 = get_ram_size((long *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	if (!dramsize) {
 		sdram_start(1);
 		test2 = get_ram_size((long *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize2 = test1;
 	} else
 		dramsize2 = test2;

 	/* memory smaller than 1MB is impossible */
 	if (dramsize2 < (1 << 20))
 		dramsize2 = 0;

 	/* set SDRAM CS1 size according to the amount of RAM found */
 	if (dramsize2 > 0)
 		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize
 			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
 	else
 		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */

 #else /* CONFIG_SYS_RAMBOOT */

 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *) MPC5XXX_SDRAM_CS0CFG & 0xFF;
 	if (dramsize >= 0x13)
 		dramsize = (1 << (dramsize - 0x13)) << 20;
 	else
 		dramsize = 0;

 	/* retrieve size of memory connected to SDRAM CS1 */
 	dramsize2 = *(vu_long *) MPC5XXX_SDRAM_CS1CFG & 0xFF;
 	if (dramsize2 >= 0x13)
 		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
 	else
 		dramsize2 = 0;

 #endif /* CONFIG_SYS_RAMBOOT */

 	/*
 	 * On MPC5200B we need to set the special configuration delay in the
 	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
 	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
 	 *
 	 * "The SDelay should be written to a value of 0x00000004. It is
 	 * required to account for changes caused by normal wafer processing
 	 * parameters."
 	 */
 	svr = get_svr();
 	pvr = get_pvr();
 	if ((SVR_MJREV(svr) >= 2) &&
 		(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {

 		*(vu_long *) MPC5XXX_SDRAM_SDELAY = 0x04;
 		__asm__ volatile ("sync");
 	}

 	return dramsize + dramsize2;
 }


 int checkboard (void)
 {
 	puts("Board: MarelV38B\n");
 	return 0;
 }

 int board_early_init_f(void)
 {
 #ifdef CONFIG_HW_WATCHDOG
 	/*
 	 * Enable and configure the direction (output) of PSC3_9 - watchdog
 	 * reset input. Refer to 7.3.2.2.[1,3,4] of the MPC5200B User's
 	 * Manual.
 	 */
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9;
 #endif /* CONFIG_HW_WATCHDOG */
 	return 0;
 }

 int board_early_init_r(void)
 {
 	/*
 	 * Now, when we are in RAM, enable flash write access for the
 	 * detection process.  Note that CS_BOOT cannot be cleared when
 	 * executing in flash.
 	 */
 	*(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */

 	/*
 	 * Enable GPIO_WKUP_7 to "read the status of the actual power
 	 * situation". Default direction is input, so no need to set it
 	 * explicitly.
 	 */
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WKUP_7;
 	return 0;
 }

 extern void board_get_enetaddr(uchar *enetaddr);
 int misc_init_r(void)
 {
 	uchar enetaddr[6];

 	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
 		board_get_enetaddr(enetaddr);
 		eth_putenv_enetaddr("ethaddr", enetaddr);
 	}

 	return 0;
 }

 #if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 void init_ide_reset(void)
 {
 	debug("init_ide_reset\n");

 	/* Configure PSC1_4 as GPIO output for ATA reset */
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
 	/* Deassert reset */
 	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
 }


 void ide_set_reset(int idereset)
 {
 	debug("ide_reset(%d)\n", idereset);

 	if (idereset) {
 		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 		/* Make a delay. MPC5200 spec says 25 usec min */
 		udelay(500000);
 	} else
 		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 }
 #endif


 #ifdef CONFIG_HW_WATCHDOG
 void hw_watchdog_reset(void)
 {
 	/*
 	 * MarelV38B has a TPS3705 watchdog. Spec says that to kick the dog
 	 * we need a positive or negative transition on WDI i.e., our PSC3_9.
 	 */
 	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O ^= GPIO_PSC3_9;
 }
 #endif /* CONFIG_HW_WATCHDOG */
	/*
	* (C) Copyright 2003-2006
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* (C) Copyright 2004
	* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <mpc5xxx.h>
	#include <asm/processor.h>


	#ifndef CONFIG_SYS_RAMBOOT
	static void sdram_start(int hi_addr)
	{
	long hi_addr_bit = hi_addr ? 0x01000000 : 0;

	/* unlock mode register */
	(vu_long ) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL \| 0x80000000 \| hi_addr_bit;
	__asm__ volatile ("sync");

	/* precharge all banks */
	(vu_long ) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL \| 0x80000002 \| hi_addr_bit;
	__asm__ volatile ("sync");

	#if SDRAM_DDR
	/* set mode register: extended mode */
	(vu_long ) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
	__asm__ volatile ("sync");

	/* set mode register: reset DLL */
	(vu_long ) MPC5XXX_SDRAM_MODE = SDRAM_MODE \| 0x04000000;
	__asm__ volatile ("sync");
	#endif /* SDRAM_DDR */

	/* precharge all banks */
	(vu_long ) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL \| 0x80000002 \| hi_addr_bit;
	__asm__ volatile ("sync");

	/* auto refresh */
	(vu_long ) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL \| 0x80000004 \| hi_addr_bit;
	__asm__ volatile ("sync");

	/* set mode register */
	(vu_long ) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
	__asm__ volatile ("sync");

	/* normal operation */
	(vu_long ) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL \| hi_addr_bit;
	__asm__ volatile ("sync");
	}
	#endif /* !CONFIG_SYS_RAMBOOT */


	phys_size_t initdram(int board_type)
	{
	ulong dramsize = 0;
	ulong dramsize2 = 0;
	uint svr, pvr;

	#ifndef CONFIG_SYS_RAMBOOT
	ulong test1, test2;

	/* setup SDRAM chip selects */
	(vu_long ) MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
	(vu_long ) MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */
	__asm__ volatile ("sync");

	/* setup config registers */
	(vu_long ) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
	(vu_long ) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
	__asm__ volatile ("sync");

	#if SDRAM_DDR
	/* set tap delay */
	(vu_long ) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
	__asm__ volatile ("sync");
	#endif /* SDRAM_DDR */

	/* find RAM size using SDRAM CS0 only */
	sdram_start(0);
	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
	sdram_start(1);
	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
	if (test1 > test2) {
	sdram_start(0);
	dramsize = test1;
	} else
	dramsize = test2;

	/* memory smaller than 1MB is impossible */
	if (dramsize < (1 << 20))
	dramsize = 0;

	/* set SDRAM CS0 size according to the amount of RAM found */
	if (dramsize > 0)
	(vu_long ) MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
	else
	(vu_long ) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */

	/* let SDRAM CS1 start right after CS0 */
	(vu_long ) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */

	/* find RAM size using SDRAM CS1 only */
	if (!dramsize)
	sdram_start(0);
	test2 = test1 = get_ram_size((long *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
	if (!dramsize) {
	sdram_start(1);
	test2 = get_ram_size((long *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
	}
	if (test1 > test2) {
	sdram_start(0);
	dramsize2 = test1;
	} else
	dramsize2 = test2;

	/* memory smaller than 1MB is impossible */
	if (dramsize2 < (1 << 20))
	dramsize2 = 0;

	/* set SDRAM CS1 size according to the amount of RAM found */
	if (dramsize2 > 0)
	(vu_long ) MPC5XXX_SDRAM_CS1CFG = dramsize
	\| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
	else
	(vu_long ) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */

	#else /* CONFIG_SYS_RAMBOOT */

	/* retrieve size of memory connected to SDRAM CS0 */
	dramsize = (vu_long ) MPC5XXX_SDRAM_CS0CFG & 0xFF;
	if (dramsize >= 0x13)
	dramsize = (1 << (dramsize - 0x13)) << 20;
	else
	dramsize = 0;

	/* retrieve size of memory connected to SDRAM CS1 */
	dramsize2 = (vu_long ) MPC5XXX_SDRAM_CS1CFG & 0xFF;
	if (dramsize2 >= 0x13)
	dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
	else
	dramsize2 = 0;

	#endif /* CONFIG_SYS_RAMBOOT */

	/*
	* On MPC5200B we need to set the special configuration delay in the
	* DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
	* Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
	*
	* "The SDelay should be written to a value of 0x00000004. It is
	* required to account for changes caused by normal wafer processing
	* parameters."
	*/
	svr = get_svr();
	pvr = get_pvr();
	if ((SVR_MJREV(svr) >= 2) &&
	(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {

	(vu_long ) MPC5XXX_SDRAM_SDELAY = 0x04;
	__asm__ volatile ("sync");
	}

	return dramsize + dramsize2;
	}


	int checkboard (void)
	{
	puts("Board: MarelV38B\n");
	return 0;
	}

	int board_early_init_f(void)
	{
	#ifdef CONFIG_HW_WATCHDOG
	/*
	* Enable and configure the direction (output) of PSC3_9 - watchdog
	* reset input. Refer to 7.3.2.2.[1,3,4] of the MPC5200B User's
	* Manual.
	*/
	(vu_long ) MPC5XXX_WU_GPIO_ENABLE \|= GPIO_PSC3_9;
	(vu_long ) MPC5XXX_WU_GPIO_DIR \|= GPIO_PSC3_9;
	#endif /* CONFIG_HW_WATCHDOG */
	return 0;
	}

	int board_early_init_r(void)
	{
	/*
	* Now, when we are in RAM, enable flash write access for the
	* detection process. Note that CS_BOOT cannot be cleared when
	* executing in flash.
	*/
	(vu_long ) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */

	/*
	* Enable GPIO_WKUP_7 to "read the status of the actual power
	* situation". Default direction is input, so no need to set it
	* explicitly.
	*/
	(vu_long ) MPC5XXX_WU_GPIO_ENABLE \|= GPIO_WKUP_7;
	return 0;
	}

	extern void board_get_enetaddr(uchar *enetaddr);
	int misc_init_r(void)
	{
	uchar enetaddr[6];

	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
	board_get_enetaddr(enetaddr);
	eth_putenv_enetaddr("ethaddr", enetaddr);
	}

	return 0;
	}

	#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
	void init_ide_reset(void)
	{
	debug("init_ide_reset\n");

	/* Configure PSC1_4 as GPIO output for ATA reset */
	(vu_long ) MPC5XXX_WU_GPIO_ENABLE \|= GPIO_PSC1_4;
	(vu_long ) MPC5XXX_WU_GPIO_DIR \|= GPIO_PSC1_4;
	/* Deassert reset */
	(vu_long ) MPC5XXX_WU_GPIO_DATA_O \|= GPIO_PSC1_4;
	}


	void ide_set_reset(int idereset)
	{
	debug("ide_reset(%d)\n", idereset);

	if (idereset) {
	(vu_long ) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
	/* Make a delay. MPC5200 spec says 25 usec min */
	udelay(500000);
	} else
	(vu_long ) MPC5XXX_WU_GPIO_DATA_O \|= GPIO_PSC1_4;
	}
	#endif


	#ifdef CONFIG_HW_WATCHDOG
	void hw_watchdog_reset(void)
	{
	/*
	* MarelV38B has a TPS3705 watchdog. Spec says that to kick the dog
	* we need a positive or negative transition on WDI i.e., our PSC3_9.
	*/
	(vu_long ) MPC5XXX_WU_GPIO_DATA_O ^= GPIO_PSC3_9;
	}
	#endif /* CONFIG_HW_WATCHDOG */