powerpc/t1024rdb: Add support for T1024RDB-PB
T1024RDB-PB board adds 2.5G SGMII support with AQR105 PHY.
rcw_0x095 is used for 10G XFI + 3x PCIex1
rcw_0x135 is used for 2.5G SGMII + 2x PCIex1
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c
index 96457cf..e196f12 100644
--- a/board/freescale/t102xrdb/t102xrdb.c
+++ b/board/freescale/t102xrdb/t102xrdb.c
@@ -27,6 +27,11 @@
{
struct cpu_type *cpu = gd->arch.cpu;
static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"};
+ ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_s1;
+
+ srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
printf("Board: %sRDB, ", cpu->name);
printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ",
@@ -50,11 +55,34 @@
#endif
puts("SERDES Reference Clocks:\n");
- printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
+ if (srds_s1 == 0x95)
+ printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
+ else
+ printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[0]);
return 0;
}
+static void board_mux_lane(void)
+{
+ ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_prtcl_s1;
+ u8 reg = CPLD_READ(misc_ctl_status);
+
+ srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+ if (srds_prtcl_s1 == 0x95) {
+ /* Route Lane B to PCIE */
+ CPLD_WRITE(misc_ctl_status, reg & ~CPLD_PCIE_SGMII_MUX);
+ } else {
+ /* Route Lane B to SGMII */
+ CPLD_WRITE(misc_ctl_status, reg | CPLD_PCIE_SGMII_MUX);
+ }
+ CPLD_WRITE(boot_override, CPLD_OVERRIDE_MUX_EN);
+}
+
int board_early_init_f(void)
{
#if defined(CONFIG_DEEP_SLEEP)
@@ -96,6 +124,7 @@
#ifdef CONFIG_SYS_DPAA_QBMAN
setup_portals();
#endif
+ board_mux_lane();
return 0;
}