diff --git a/include/configs/helios4.h b/include/configs/helios4.h
index e665340..3157225 100644
--- a/include/configs/helios4.h
+++ b/include/configs/helios4.h
@@ -6,6 +6,8 @@
 #ifndef _CONFIG_HELIOS4_H
 #define _CONFIG_HELIOS4_H
 
+#include <linux/sizes.h>
+
 /*
  * High Level Configuration Options (easy to change)
  */
@@ -23,6 +25,9 @@
 
 /* SPI NOR flash default params, used by sf commands */
 #define CONFIG_SF_DEFAULT_BUS		1
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		104000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
 
 /*
  * SDIO/MMC Card Configuration
@@ -43,6 +48,21 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					CONFIG_SYS_SCSI_MAX_LUN)
 
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
+/*
+ * SPI Flash configuration for the environment access
+ */
+#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
+
+/* Environment in SPI NOR flash */
+#define CONFIG_ENV_SECT_SIZE		SZ_64K
+#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_OFFSET		SZ_1M
+#endif
+
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
 /* Environment in MMC */
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SECT_SIZE		0x200
@@ -50,6 +70,7 @@
 /* stay within first 1M */
 #define CONFIG_ENV_OFFSET		(SZ_1M - CONFIG_ENV_SIZE)
 #define CONFIG_ENV_ADDR			CONFIG_ENV_OFFSET
+#endif
 
 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
@@ -69,7 +90,13 @@
  */
 #define SPL_BOOT_SPI_NOR_FLASH		1
 #define SPL_BOOT_SDIO_MMC_CARD		2
+
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
+#define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SPI_NOR_FLASH
+#endif
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
 #define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SDIO_MMC_CARD
+#endif
 
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
@@ -88,12 +115,16 @@
 
 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 /* SPL related SPI defines */
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
 #endif
 
 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 /* SPL related MMC defines */
+#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
 #define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
 #ifdef CONFIG_SPL_BUILD