x86: Rename i386 to x86
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
new file mode 100644
index 0000000..c7a38f2
--- /dev/null
+++ b/arch/x86/include/asm/bitops.h
@@ -0,0 +1,384 @@
+#ifndef _I386_BITOPS_H
+#define _I386_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX "lock ; "
+#else
+#define LOCK_PREFIX ""
+#endif
+
+#define ADDR (*(volatile long *) addr)
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered. See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void set_bit(int nr, volatile void * addr)
+{
+ __asm__ __volatile__( LOCK_PREFIX
+ "btsl %1,%0"
+ :"=m" (ADDR)
+ :"Ir" (nr));
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void __set_bit(int nr, volatile void * addr)
+{
+ __asm__(
+ "btsl %1,%0"
+ :"=m" (ADDR)
+ :"Ir" (nr));
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered. However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static __inline__ void clear_bit(int nr, volatile void * addr)
+{
+ __asm__ __volatile__( LOCK_PREFIX
+ "btrl %1,%0"
+ :"=m" (ADDR)
+ :"Ir" (nr));
+}
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void __change_bit(int nr, volatile void * addr)
+{
+ __asm__ __volatile__(
+ "btcl %1,%0"
+ :"=m" (ADDR)
+ :"Ir" (nr));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void change_bit(int nr, volatile void * addr)
+{
+ __asm__ __volatile__( LOCK_PREFIX
+ "btcl %1,%0"
+ :"=m" (ADDR)
+ :"Ir" (nr));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_set_bit(int nr, volatile void * addr)
+{
+ int oldbit;
+
+ __asm__ __volatile__( LOCK_PREFIX
+ "btsl %2,%1\n\tsbbl %0,%0"
+ :"=r" (oldbit),"=m" (ADDR)
+ :"Ir" (nr) : "memory");
+ return oldbit;
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail. You must protect multiple accesses with a lock.
+ */
+static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
+{
+ int oldbit;
+
+ __asm__(
+ "btsl %2,%1\n\tsbbl %0,%0"
+ :"=r" (oldbit),"=m" (ADDR)
+ :"Ir" (nr));
+ return oldbit;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
+{
+ int oldbit;
+
+ __asm__ __volatile__( LOCK_PREFIX
+ "btrl %2,%1\n\tsbbl %0,%0"
+ :"=r" (oldbit),"=m" (ADDR)
+ :"Ir" (nr) : "memory");
+ return oldbit;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail. You must protect multiple accesses with a lock.
+ */
+static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
+{
+ int oldbit;
+
+ __asm__(
+ "btrl %2,%1\n\tsbbl %0,%0"
+ :"=r" (oldbit),"=m" (ADDR)
+ :"Ir" (nr));
+ return oldbit;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
+{
+ int oldbit;
+
+ __asm__ __volatile__(
+ "btcl %2,%1\n\tsbbl %0,%0"
+ :"=r" (oldbit),"=m" (ADDR)
+ :"Ir" (nr) : "memory");
+ return oldbit;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its new value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_change_bit(int nr, volatile void * addr)
+{
+ int oldbit;
+
+ __asm__ __volatile__( LOCK_PREFIX
+ "btcl %2,%1\n\tsbbl %0,%0"
+ :"=r" (oldbit),"=m" (ADDR)
+ :"Ir" (nr) : "memory");
+ return oldbit;
+}
+
+#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static int test_bit(int nr, const volatile void * addr);
+#endif
+
+static __inline__ int constant_test_bit(int nr, const volatile void * addr)
+{
+ return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int variable_test_bit(int nr, volatile void * addr)
+{
+ int oldbit;
+
+ __asm__ __volatile__(
+ "btl %2,%1\n\tsbbl %0,%0"
+ :"=r" (oldbit)
+ :"m" (ADDR),"Ir" (nr));
+ return oldbit;
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ constant_test_bit((nr),(addr)) : \
+ variable_test_bit((nr),(addr)))
+
+/**
+ * find_first_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first zero bit, not the number of the byte
+ * containing a bit.
+ */
+static __inline__ int find_first_zero_bit(void * addr, unsigned size)
+{
+ int d0, d1, d2;
+ int res;
+
+ if (!size)
+ return 0;
+ /* This looks at memory. Mark it volatile to tell gcc not to move it around */
+ __asm__ __volatile__(
+ "movl $-1,%%eax\n\t"
+ "xorl %%edx,%%edx\n\t"
+ "repe; scasl\n\t"
+ "je 1f\n\t"
+ "xorl -4(%%edi),%%eax\n\t"
+ "subl $4,%%edi\n\t"
+ "bsfl %%eax,%%edx\n"
+ "1:\tsubl %%ebx,%%edi\n\t"
+ "shll $3,%%edi\n\t"
+ "addl %%edi,%%edx"
+ :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
+ :"1" ((size + 31) >> 5), "2" (addr), "b" (addr));
+ return res;
+}
+
+/**
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static __inline__ int find_next_zero_bit (void * addr, int size, int offset)
+{
+ unsigned long * p = ((unsigned long *) addr) + (offset >> 5);
+ int set = 0, bit = offset & 31, res;
+
+ if (bit) {
+ /*
+ * Look for zero in first byte
+ */
+ __asm__("bsfl %1,%0\n\t"
+ "jne 1f\n\t"
+ "movl $32, %0\n"
+ "1:"
+ : "=r" (set)
+ : "r" (~(*p >> bit)));
+ if (set < (32 - bit))
+ return set + offset;
+ set = 32 - bit;
+ p++;
+ }
+ /*
+ * No zero yet, search remaining full bytes for a zero
+ */
+ res = find_first_zero_bit (p, size - 32 * (p - (unsigned long *) addr));
+ return (offset + set + res);
+}
+
+/**
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static __inline__ unsigned long ffz(unsigned long word)
+{
+ __asm__("bsfl %1,%0"
+ :"=r" (word)
+ :"r" (~word));
+ return word;
+}
+
+#ifdef __KERNEL__
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+ int r;
+
+ __asm__("bsfl %1,%0\n\t"
+ "jnz 1f\n\t"
+ "movl $-1,%0\n"
+ "1:" : "=r" (r) : "g" (x));
+ return r+1;
+}
+#define PLATFORM_FFS
+
+/**
+ * hweightN - returns the hamming weight of a N-bit word
+ * @x: the word to weigh
+ *
+ * The Hamming Weight of a number is the total number of bits set in it.
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif /* __KERNEL__ */
+
+#ifdef __KERNEL__
+
+#define ext2_set_bit __test_and_set_bit
+#define ext2_clear_bit __test_and_clear_bit
+#define ext2_test_bit test_bit
+#define ext2_find_first_zero_bit find_first_zero_bit
+#define ext2_find_next_zero_bit find_next_zero_bit
+
+/* Bitmap functions for the minix filesystem. */
+#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) __set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+#endif /* __KERNEL__ */
+
+#endif /* _I386_BITOPS_H */
diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
new file mode 100644
index 0000000..1400951
--- /dev/null
+++ b/arch/x86/include/asm/bootparam.h
@@ -0,0 +1,120 @@
+#ifndef _ASM_X86_BOOTPARAM_H
+#define _ASM_X86_BOOTPARAM_H
+
+#include <linux/types.h>
+#include <linux/screen_info.h>
+#include <linux/apm_bios.h>
+#include <linux/edd.h>
+#include <asm/e820.h>
+#include <asm/ist.h>
+#include <asm/video/edid.h>
+
+/* setup data types */
+#define SETUP_NONE 0
+#define SETUP_E820_EXT 1
+
+/* extensible setup data list node */
+struct setup_data {
+ __u64 next;
+ __u32 type;
+ __u32 len;
+ __u8 data[0];
+};
+
+struct setup_header {
+ __u8 setup_sects;
+ __u16 root_flags;
+ __u32 syssize;
+ __u16 ram_size;
+#define RAMDISK_IMAGE_START_MASK 0x07FF
+#define RAMDISK_PROMPT_FLAG 0x8000
+#define RAMDISK_LOAD_FLAG 0x4000
+ __u16 vid_mode;
+ __u16 root_dev;
+ __u16 boot_flag;
+ __u16 jump;
+ __u32 header;
+ __u16 version;
+ __u32 realmode_swtch;
+ __u16 start_sys;
+ __u16 kernel_version;
+ __u8 type_of_loader;
+ __u8 loadflags;
+#define LOADED_HIGH (1<<0)
+#define QUIET_FLAG (1<<5)
+#define KEEP_SEGMENTS (1<<6)
+#define CAN_USE_HEAP (1<<7)
+ __u16 setup_move_size;
+ __u32 code32_start;
+ __u32 ramdisk_image;
+ __u32 ramdisk_size;
+ __u32 bootsect_kludge;
+ __u16 heap_end_ptr;
+ __u8 ext_loader_ver;
+ __u8 ext_loader_type;
+ __u32 cmd_line_ptr;
+ __u32 initrd_addr_max;
+ __u32 kernel_alignment;
+ __u8 relocatable_kernel;
+ __u8 _pad2[3];
+ __u32 cmdline_size;
+ __u32 hardware_subarch;
+ __u64 hardware_subarch_data;
+ __u32 payload_offset;
+ __u32 payload_length;
+ __u64 setup_data;
+} __attribute__((packed));
+
+struct sys_desc_table {
+ __u16 length;
+ __u8 table[14];
+};
+
+struct efi_info {
+ __u32 efi_loader_signature;
+ __u32 efi_systab;
+ __u32 efi_memdesc_size;
+ __u32 efi_memdesc_version;
+ __u32 efi_memmap;
+ __u32 efi_memmap_size;
+ __u32 efi_systab_hi;
+ __u32 efi_memmap_hi;
+};
+
+/* The so-called "zeropage" */
+struct boot_params {
+ struct screen_info screen_info; /* 0x000 */
+ struct apm_bios_info apm_bios_info; /* 0x040 */
+ __u8 _pad2[4]; /* 0x054 */
+ __u64 tboot_addr; /* 0x058 */
+ struct ist_info ist_info; /* 0x060 */
+ __u8 _pad3[16]; /* 0x070 */
+ __u8 hd0_info[16]; /* obsolete! */ /* 0x080 */
+ __u8 hd1_info[16]; /* obsolete! */ /* 0x090 */
+ struct sys_desc_table sys_desc_table; /* 0x0a0 */
+ __u8 _pad4[144]; /* 0x0b0 */
+ struct edid_info edid_info; /* 0x140 */
+ struct efi_info efi_info; /* 0x1c0 */
+ __u32 alt_mem_k; /* 0x1e0 */
+ __u32 scratch; /* Scratch field! */ /* 0x1e4 */
+ __u8 e820_entries; /* 0x1e8 */
+ __u8 eddbuf_entries; /* 0x1e9 */
+ __u8 edd_mbr_sig_buf_entries; /* 0x1ea */
+ __u8 _pad6[6]; /* 0x1eb */
+ struct setup_header hdr; /* setup header */ /* 0x1f1 */
+ __u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)];
+ __u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */
+ struct e820entry e820_map[E820MAX]; /* 0x2d0 */
+ __u8 _pad8[48]; /* 0xcd0 */
+ struct edd_info eddbuf[EDDMAXNR]; /* 0xd00 */
+ __u8 _pad9[276]; /* 0xeec */
+} __attribute__((packed));
+
+enum {
+ X86_SUBARCH_PC = 0,
+ X86_SUBARCH_LGUEST,
+ X86_SUBARCH_XEN,
+ X86_SUBARCH_MRST,
+ X86_NR_SUBARCHS,
+};
+#endif /* _ASM_X86_BOOTPARAM_H */
diff --git a/arch/x86/include/asm/byteorder.h b/arch/x86/include/asm/byteorder.h
new file mode 100644
index 0000000..7dfeb8b
--- /dev/null
+++ b/arch/x86/include/asm/byteorder.h
@@ -0,0 +1,43 @@
+#ifndef _I386_BYTEORDER_H
+#define _I386_BYTEORDER_H
+
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+
+static __inline__ __u32 ___arch__swab32(__u32 x)
+{
+#ifdef CONFIG_X86_BSWAP
+ __asm__("bswap %0" : "=r" (x) : "0" (x));
+#else
+ __asm__("xchgb %b0,%h0\n\t" /* swap lower bytes */
+ "rorl $16,%0\n\t" /* swap words */
+ "xchgb %b0,%h0" /* swap higher bytes */
+ :"=q" (x)
+ : "0" (x));
+#endif
+ return x;
+}
+
+static __inline__ __u16 ___arch__swab16(__u16 x)
+{
+ __asm__("xchgb %b0,%h0" /* swap bytes */ \
+ : "=q" (x) \
+ : "0" (x)); \
+ return x;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _I386_BYTEORDER_H */
diff --git a/arch/x86/include/asm/config.h b/arch/x86/include/asm/config.h
new file mode 100644
index 0000000..049c44e
--- /dev/null
+++ b/arch/x86/include/asm/config.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ASM_CONFIG_H_
+#define _ASM_CONFIG_H_
+
+#endif
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
new file mode 100644
index 0000000..d155ce9
--- /dev/null
+++ b/arch/x86/include/asm/e820.h
@@ -0,0 +1,155 @@
+#ifndef _ASM_X86_E820_H
+#define _ASM_X86_E820_H
+#define E820MAP 0x2d0 /* our map */
+#define E820MAX 128 /* number of entries in E820MAP */
+
+/*
+ * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
+ * constrained space in the zeropage. If we have more nodes than
+ * that, and if we've booted off EFI firmware, then the EFI tables
+ * passed us from the EFI firmware can list more nodes. Size our
+ * internal memory map tables to have room for these additional
+ * nodes, based on up to three entries per node for which the
+ * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
+ * plus E820MAX, allowing space for the possible duplicate E820
+ * entries that might need room in the same arrays, prior to the
+ * call to sanitize_e820_map() to remove duplicates. The allowance
+ * of three memory map entries per node is "enough" entries for
+ * the initial hardware platform motivating this mechanism to make
+ * use of additional EFI map entries. Future platforms may want
+ * to allow more than three entries per node or otherwise refine
+ * this size.
+ */
+
+/*
+ * Odd: 'make headers_check' complains about numa.h if I try
+ * to collapse the next two #ifdef lines to a single line:
+ * #if defined(__KERNEL__) && defined(CONFIG_EFI)
+ */
+#ifdef __KERNEL__
+#ifdef CONFIG_EFI
+#include <linux/numa.h>
+#define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES)
+#else /* ! CONFIG_EFI */
+#define E820_X_MAX E820MAX
+#endif
+#else /* ! __KERNEL__ */
+#define E820_X_MAX E820MAX
+#endif
+
+#define E820NR 0x1e8 /* # entries in E820MAP */
+
+#define E820_RAM 1
+#define E820_RESERVED 2
+#define E820_ACPI 3
+#define E820_NVS 4
+#define E820_UNUSABLE 5
+
+/* reserved RAM used by kernel itself */
+#define E820_RESERVED_KERN 128
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+struct e820entry {
+ __u64 addr; /* start of memory segment */
+ __u64 size; /* size of memory segment */
+ __u32 type; /* type of memory segment */
+} __attribute__((packed));
+
+struct e820map {
+ __u32 nr_map;
+ struct e820entry map[E820_X_MAX];
+};
+
+#define ISA_START_ADDRESS 0xa0000
+#define ISA_END_ADDRESS 0x100000
+
+#define BIOS_BEGIN 0x000a0000
+#define BIOS_END 0x00100000
+
+#ifdef __KERNEL__
+/* see comment in arch/x86/kernel/e820.c */
+extern struct e820map e820;
+extern struct e820map e820_saved;
+
+extern unsigned long pci_mem_start;
+extern int e820_any_mapped(u64 start, u64 end, unsigned type);
+extern int e820_all_mapped(u64 start, u64 end, unsigned type);
+extern void e820_add_region(u64 start, u64 size, int type);
+extern void e820_print_map(char *who);
+extern int
+sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, u32 *pnr_map);
+extern u64 e820_update_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type);
+extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type,
+ int checktype);
+extern void update_e820(void);
+extern void e820_setup_gap(void);
+extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
+ unsigned long start_addr, unsigned long long end_addr);
+struct setup_data;
+extern void parse_e820_ext(struct setup_data *data, unsigned long pa_data);
+
+#if defined(CONFIG_X86_64) || \
+ (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
+extern void e820_mark_nosave_regions(unsigned long limit_pfn);
+#else
+static inline void e820_mark_nosave_regions(unsigned long limit_pfn)
+{
+}
+#endif
+
+#ifdef CONFIG_MEMTEST
+extern void early_memtest(unsigned long start, unsigned long end);
+#else
+static inline void early_memtest(unsigned long start, unsigned long end)
+{
+}
+#endif
+
+extern unsigned long end_user_pfn;
+
+extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align);
+extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align);
+extern void reserve_early(u64 start, u64 end, char *name);
+extern void reserve_early_overlap_ok(u64 start, u64 end, char *name);
+extern void free_early(u64 start, u64 end);
+extern void early_res_to_bootmem(u64 start, u64 end);
+extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
+
+extern unsigned long e820_end_of_ram_pfn(void);
+extern unsigned long e820_end_of_low_ram_pfn(void);
+extern int e820_find_active_region(const struct e820entry *ei,
+ unsigned long start_pfn,
+ unsigned long last_pfn,
+ unsigned long *ei_startpfn,
+ unsigned long *ei_endpfn);
+extern void e820_register_active_regions(int nid, unsigned long start_pfn,
+ unsigned long end_pfn);
+extern u64 e820_hole_size(u64 start, u64 end);
+extern void finish_e820_parsing(void);
+extern void e820_reserve_resources(void);
+extern void e820_reserve_resources_late(void);
+extern void setup_memory_map(void);
+extern char *default_machine_specific_memory_setup(void);
+
+/*
+ * Returns true iff the specified range [s,e) is completely contained inside
+ * the ISA region.
+ */
+/*
+static inline bool is_ISA_range(u64 s, u64 e)
+{
+ return s >= ISA_START_ADDRESS && e <= ISA_END_ADDRESS;
+}
+*/
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+/* #include <linux/ioport.h> */
+
+#define HIGH_MEMORY (1024*1024)
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_E820_H */
diff --git a/arch/x86/include/asm/errno.h b/arch/x86/include/asm/errno.h
new file mode 100644
index 0000000..4c82b50
--- /dev/null
+++ b/arch/x86/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
new file mode 100644
index 0000000..f8a16d6
--- /dev/null
+++ b/arch/x86/include/asm/global_data.h
@@ -0,0 +1,102 @@
+/*
+ * (C) Copyright 2002-2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_GBL_DATA_H
+#define __ASM_GBL_DATA_H
+/*
+ * The following data structure is placed in some memory wich is
+ * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
+ * some locked parts of the data cache) to allow for a minimum set of
+ * global variables during system initialization (until we have set
+ * up the memory controller so that we can use RAM).
+ *
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef struct global_data {
+ bd_t *bd;
+ unsigned long flags;
+ unsigned long baudrate;
+ unsigned long have_console; /* serial_init() was called */
+ unsigned long reloc_off; /* Relocation Offset */
+ unsigned long load_off; /* Load Offset */
+ unsigned long env_addr; /* Address of Environment struct */
+ unsigned long env_valid; /* Checksum of Environment valid? */
+ unsigned long cpu_clk; /* CPU clock in Hz! */
+ unsigned long bus_clk;
+ unsigned long relocaddr; /* Start address of U-Boot in RAM */
+ unsigned long start_addr_sp; /* start_addr_stackpointer */
+ phys_size_t ram_size; /* RAM size */
+ unsigned long reset_status; /* reset status register at boot */
+ void **jt; /* jump table */
+ char env_buf[32]; /* buffer for getenv() before reloc. */
+} gd_t;
+
+extern gd_t *gd;
+
+#endif
+
+/* Word Offsets into Global Data - MUST match struct gd_t */
+#define GD_BD 0
+#define GD_FLAGS 1
+#define GD_BAUDRATE 2
+#define GD_HAVE_CONSOLE 3
+#define GD_RELOC_OFF 4
+#define GD_LOAD_OFF 5
+#define GD_ENV_ADDR 6
+#define GD_ENV_VALID 7
+#define GD_CPU_CLK 8
+#define GD_BUS_CLK 9
+#define GD_RELOC_ADDR 10
+#define GD_START_ADDR_SP 11
+#define GD_RAM_SIZE 12
+#define GD_RESET_STATUS 13
+#define GD_JT 14
+
+#define GD_SIZE 15
+
+/*
+ * Global Data Flags
+ */
+#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
+#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
+#define GD_FLG_SILENT 0x00004 /* Silent mode */
+#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
+#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
+#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
+#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
+#define GD_FLG_ENV_READY 0x00080 /* Environment imported into hash table */
+#define GD_FLG_COLD_BOOT 0x00100 /* Cold Boot */
+#define GD_FLG_WARM_BOOT 0x00200 /* Warm Boot */
+
+#if 0
+#define DECLARE_GLOBAL_DATA_PTR
+#else
+#define XTRN_DECLARE_GLOBAL_DATA_PTR extern
+#define DECLARE_GLOBAL_DATA_PTR XTRN_DECLARE_GLOBAL_DATA_PTR \
+gd_t *gd
+#endif
+
+#endif /* __ASM_GBL_DATA_H */
diff --git a/arch/x86/include/asm/i8254.h b/arch/x86/include/asm/i8254.h
new file mode 100644
index 0000000..aafdfb8
--- /dev/null
+++ b/arch/x86/include/asm/i8254.h
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/* i8254.h Intel 8254 PIT registers */
+
+
+#ifndef _ASMI386_I8254_H_
+#define _ASMI386_I8954_H_ 1
+
+
+#define PIT_T0 0x00 /* PIT channel 0 count/status */
+#define PIT_T1 0x01 /* PIT channel 1 count/status */
+#define PIT_T2 0x02 /* PIT channel 2 count/status */
+#define PIT_COMMAND 0x03 /* PIT mode control, latch and read back */
+
+/* PIT Command Register Bit Definitions */
+
+#define PIT_CMD_CTR0 0x00 /* Select PIT counter 0 */
+#define PIT_CMD_CTR1 0x40 /* Select PIT counter 1 */
+#define PIT_CMD_CTR2 0x80 /* Select PIT counter 2 */
+
+#define PIT_CMD_LATCH 0x00 /* Counter Latch Command */
+#define PIT_CMD_LOW 0x10 /* Access counter bits 7-0 */
+#define PIT_CMD_HIGH 0x20 /* Access counter bits 15-8 */
+#define PIT_CMD_BOTH 0x30 /* Access counter bits 15-0 in two accesses */
+
+#define PIT_CMD_MODE0 0x00 /* Select mode 0 */
+#define PIT_CMD_MODE1 0x02 /* Select mode 1 */
+#define PIT_CMD_MODE2 0x04 /* Select mode 2 */
+#define PIT_CMD_MODE3 0x06 /* Select mode 3 */
+#define PIT_CMD_MODE4 0x08 /* Select mode 4 */
+#define PIT_CMD_MODE5 0x0A /* Select mode 5 */
+
+#endif
diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h
new file mode 100644
index 0000000..774d7a3
--- /dev/null
+++ b/arch/x86/include/asm/i8259.h
@@ -0,0 +1,88 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* i8259.h i8259 PIC Registers */
+
+#ifndef _ASMI386_I8259_H_
+#define _ASMI386_I8959_H_ 1
+
+
+/* PIC I/O mapped registers */
+
+#define IRR 0x0 /* Interrupt Request Register */
+#define ISR 0x0 /* In-Service Register */
+#define ICW1 0x0 /* Initialization Control Word 1 */
+#define OCW2 0x0 /* Operation Control Word 2 */
+#define OCW3 0x0 /* Operation Control Word 3 */
+#define ICW2 0x1 /* Initialization Control Word 2 */
+#define ICW3 0x1 /* Initialization Control Word 3 */
+#define ICW4 0x1 /* Initialization Control Word 4 */
+#define IMR 0x1 /* Interrupt Mask Register */
+
+/* bits for IRR, IMR, ISR and ICW3 */
+#define IR7 0x80 /* IR7 */
+#define IR6 0x40 /* IR6 */
+#define IR5 0x20 /* IR5 */
+#define IR4 0x10 /* IR4 */
+#define IR3 0x08 /* IR3 */
+#define IR2 0x04 /* IR2 */
+#define IR1 0x02 /* IR1 */
+#define IR0 0x01 /* IR0 */
+
+/* bits for SEOI */
+#define SEOI_IR7 0x07 /* IR7 */
+#define SEOI_IR6 0x06 /* IR6 */
+#define SEOI_IR5 0x05 /* IR5 */
+#define SEOI_IR4 0x04 /* IR4 */
+#define SEOI_IR3 0x03 /* IR3 */
+#define SEOI_IR2 0x02 /* IR2 */
+#define SEOI_IR1 0x01 /* IR1 */
+#define SEOI_IR0 0x00 /* IR0 */
+
+/* OCW2 bits */
+#define OCW2_RCLR 0x00 /* Rotate/clear */
+#define OCW2_NEOI 0x20 /* Non specific EOI */
+#define OCW2_NOP 0x40 /* NOP */
+#define OCW2_SEOI 0x60 /* Specific EOI */
+#define OCW2_RSET 0x80 /* Rotate/set */
+#define OCW2_REOI 0xA0 /* Rotate on non specific EOI */
+#define OCW2_PSET 0xC0 /* Priority Set Command */
+#define OCW2_RSEOI 0xE0 /* Rotate on specific EOI */
+
+/* ICW1 bits */
+#define ICW1_SEL 0x10 /* Select ICW1 */
+#define ICW1_LTIM 0x08 /* Level-Triggered Interrupt Mode */
+#define ICW1_ADI 0x04 /* Address Interval */
+#define ICW1_SNGL 0x02 /* Single PIC */
+#define ICW1_EICW4 0x01 /* Expect initilization ICW4 */
+
+/* ICW2 is the starting vector number */
+
+/* ICW2 is bit-mask of present slaves for a master device,
+ * or the slave ID for a slave device */
+
+/* ICW4 bits */
+#define ICW4_AEOI 0x02 /* Automatic EOI Mode */
+#define ICW4_PM 0x01 /* Microprocessor Mode */
+
+#endif
diff --git a/arch/x86/include/asm/ibmpc.h b/arch/x86/include/asm/ibmpc.h
new file mode 100644
index 0000000..e35cbd8
--- /dev/null
+++ b/arch/x86/include/asm/ibmpc.h
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_IBMPC_H_
+#define __ASM_IBMPC_H_ 1
+
+/* misc ports in an ibm compatible pc */
+
+#define MASTER_PIC 0x20
+#define PIT_BASE 0x40
+#define KBDDATA 0x60
+#define SYSCTLB 0x62
+#define KBDCMD 0x64
+#define SYSCTLA 0x92
+#define SLAVE_PIC 0xa0
+
+#if 1
+#define UART0_BASE 0x3f8
+#define UART1_BASE 0x2f8
+#else
+/* FixMe: uarts swapped */
+#define UART0_BASE 0x2f8
+#define UART1_BASE 0x3f8
+#endif
+
+
+#endif
diff --git a/arch/x86/include/asm/ic/pci.h b/arch/x86/include/asm/ic/pci.h
new file mode 100644
index 0000000..2e4376b
--- /dev/null
+++ b/arch/x86/include/asm/ic/pci.h
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_IC_SC520_PCI_H_
+#define _ASM_IC_SC520_PCI_H_ 1
+
+/* bus mapping constants (used for PCI core initialization) */ /* bus mapping constants */
+#define SC520_REG_ADDR 0x00000cf8
+#define SC520_REG_DATA 0x00000cfc
+
+#define SC520_ISA_MEM_PHYS 0x00000000
+#define SC520_ISA_MEM_BUS 0x00000000
+#define SC520_ISA_MEM_SIZE 0x01000000
+
+#define SC520_ISA_IO_PHYS 0x00000000
+#define SC520_ISA_IO_BUS 0x00000000
+#define SC520_ISA_IO_SIZE 0x00001000
+
+/* PCI I/O space from 0x1000 to 0xdfff
+ * (make 0xe000-0xfdff available for stuff like PCCard boot) */
+#define SC520_PCI_IO_PHYS 0x00001000
+#define SC520_PCI_IO_BUS 0x00001000
+#define SC520_PCI_IO_SIZE 0x0000d000
+
+/* system memory from 0x00000000 to 0x0fffffff */
+#define SC520_PCI_MEMORY_PHYS 0x00000000
+#define SC520_PCI_MEMORY_BUS 0x00000000
+#define SC520_PCI_MEMORY_SIZE 0x10000000
+
+/* PCI bus memory from 0x10000000 to 0x26ffffff
+ * (make 0x27000000 - 0x27ffffff available for stuff like PCCard boot) */
+#define SC520_PCI_MEM_PHYS 0x10000000
+#define SC520_PCI_MEM_BUS 0x10000000
+#define SC520_PCI_MEM_SIZE 0x17000000
+
+/* pin number used for PCI interrupt mappings */
+#define SC520_PCI_INTA 0
+#define SC520_PCI_INTB 1
+#define SC520_PCI_INTC 2
+#define SC520_PCI_INTD 3
+#define SC520_PCI_GPIRQ0 4
+#define SC520_PCI_GPIRQ1 5
+#define SC520_PCI_GPIRQ2 6
+#define SC520_PCI_GPIRQ3 7
+#define SC520_PCI_GPIRQ4 8
+#define SC520_PCI_GPIRQ5 9
+#define SC520_PCI_GPIRQ6 10
+#define SC520_PCI_GPIRQ7 11
+#define SC520_PCI_GPIRQ8 12
+#define SC520_PCI_GPIRQ9 13
+#define SC520_PCI_GPIRQ10 14
+
+extern int sc520_pci_ints[];
+
+void pci_sc520_init(struct pci_controller *hose);
+int pci_set_regions(struct pci_controller *hose);
+int pci_sc520_set_irq(int pci_pin, int irq);
+
+#endif
diff --git a/arch/x86/include/asm/ic/sc520.h b/arch/x86/include/asm/ic/sc520.h
new file mode 100644
index 0000000..956c1c2
--- /dev/null
+++ b/arch/x86/include/asm/ic/sc520.h
@@ -0,0 +1,398 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_IC_SC520_H_
+#define _ASM_IC_SC520_H_ 1
+
+#ifndef __ASSEMBLY__
+
+void init_sc520(void);
+unsigned long init_sc520_dram(void);
+void sc520_udelay(unsigned long usec);
+
+/* Memory mapped configuration registers */
+typedef struct sc520_mmcr {
+ u16 revid; /* ElanSC520 microcontroller revision id */
+ u8 cpuctl; /* am5x86 CPU control */
+
+ u8 pad_0x003[0x0d];
+
+ u8 drcctl; /* SDRAM control */
+ u8 pad_0x011[0x01];
+ u8 drctmctl; /* SDRAM timing control */
+ u8 pad_0x013[0x01];
+ u16 drccfg; /* SDRAM bank configuration*/
+ u8 pad_0x016[0x02];
+ u32 drcbendadr; /* SDRAM bank 0-3 ending address*/
+ u8 pad_0x01c[0x04];
+ u8 eccctl; /* ECC control */
+ u8 eccsta; /* ECC status */
+ u8 eccckbpos; /* ECC check bit position */
+ u8 ecccktest; /* ECC Check Code Test */
+ u32 eccsbadd; /* ECC single-bit error address */
+ u32 eccmbadd; /* ECC multi-bit error address */
+
+ u8 pad_0x02c[0x14];
+
+ u8 dbctl; /* SDRAM buffer control */
+
+ u8 pad_0x041[0x0f];
+
+ u16 bootcsctl; /* /BOOTCS control */
+ u8 pad_0x052[0x02];
+ u16 romcs1ctl; /* /ROMCS1 control */
+ u16 romcs2ctl; /* /ROMCS2 control */
+
+ u8 pad_0x058[0x08];
+
+ u16 hbctl; /* host bridge control */
+ u16 hbtgtirqctl; /* host bridge target interrupt control */
+ u16 hbtgtirqsta; /* host bridge target interrupt status */
+ u16 hbmstirqctl; /* host bridge target interrupt control */
+ u16 hbmstirqsta; /* host bridge master interrupt status */
+ u8 pad_0x06a[0x02];
+ u32 mstintadd; /* host bridge master interrupt address */
+
+ u8 sysarbctl; /* system arbiter control */
+ u8 pciarbsta; /* PCI bus arbiter status */
+ u16 sysarbmenb; /* system arbiter master enable */
+ u32 arbprictl; /* arbiter priority control */
+
+ u8 pad_0x078[0x08];
+
+ u8 adddecctl; /* address decode control */
+ u8 pad_0x081[0x01];
+ u16 wpvsta; /* write-protect violation status */
+ u8 pad_0x084[0x04];
+ u32 par[16]; /* programmable address regions */
+
+ u8 pad_0x0c8[0x0b38];
+
+ u8 gpecho; /* GP echo mode */
+ u8 gpcsdw; /* GP chip select data width */
+ u16 gpcsqual; /* GP chip select qualification */
+ u8 pad_0xc04[0x4];
+ u8 gpcsrt; /* GP chip select recovery time */
+ u8 gpcspw; /* GP chip select pulse width */
+ u8 gpcsoff; /* GP chip select offset */
+ u8 gprdw; /* GP read pulse width */
+ u8 gprdoff; /* GP read offset */
+ u8 gpwrw; /* GP write pulse width */
+ u8 gpwroff; /* GP write offset */
+ u8 gpalew; /* GP ale pulse width */
+ u8 gpaleoff; /* GP ale offset */
+
+ u8 pad_0xc11[0x0f];
+
+ u16 piopfs15_0; /* PIO15-PIO0 pin function select */
+ u16 piopfs31_16; /* PIO31-PIO16 pin function select */
+ u8 cspfs; /* chip select pin function select */
+ u8 pad_0xc25[0x01];
+ u8 clksel; /* clock select */
+ u8 pad_0xc27[0x01];
+ u16 dsctl; /* drive strength control */
+ u16 piodir15_0; /* PIO15-PIO0 direction */
+ u16 piodir31_16; /* PIO31-PIO16 direction */
+ u8 pad_0xc2e[0x02];
+ u16 piodata15_0 ; /* PIO15-PIO0 data */
+ u16 piodata31_16; /* PIO31-PIO16 data */
+ u16 pioset15_0; /* PIO15-PIO0 set */
+ u16 pioset31_16; /* PIO31-PIO16 set */
+ u16 pioclr15_0; /* PIO15-PIO0 clear */
+ u16 pioclr31_16; /* PIO31-PIO16 clear */
+
+ u8 pad_0xc3c[0x24];
+
+ u16 swtmrmilli; /* software timer millisecond count */
+ u16 swtmrmicro; /* software timer microsecond count */
+ u8 swtmrcfg; /* software timer configuration */
+
+ u8 pad_0xc65[0x0b];
+
+ u8 gptmrsta; /* GP timers status register */
+ u8 pad_0xc71;
+ u16 gptmr0ctl; /* GP timer 0 mode/control */
+ u16 gptmr0cnt; /* GP timer 0 count */
+ u16 gptmr0maxcmpa; /* GP timer 0 maxcount compare A */
+ u16 gptmr0maxcmpb; /* GP timer 0 maxcount compare B */
+ u16 gptmr1ctl; /* GP timer 1 mode/control */
+ u16 gptmr1cnt; /* GP timer 1 count */
+ u16 gptmr1maxcmpa; /* GP timer 1 maxcount compare A */
+ u16 gptmr1maxcmpb; /* GP timer 1 maxcount compare B*/
+ u16 gptmr2ctl; /* GP timer 2 mode/control */
+ u16 gptmr2cnt; /* GP timer 2 count */
+ u8 pad_0xc86[0x08];
+ u16 gptmr2maxcmpa; /* GP timer 2 maxcount compare A */
+
+ u8 pad_0xc90[0x20];
+
+ u16 wdtmrctl; /* watchdog timer control */
+ u16 wdtmrcntl; /* watchdog timer count low */
+ u16 wdtmrcnth; /* watchdog timer count high */
+
+ u8 pad_0xcb6[0x0a];
+
+ u8 uart1ctl; /* UART 1 general control */
+ u8 uart1sta; /* UART 1 general status */
+ u8 uart1fcrshad; /* UART 1 FIFO control shadow */
+ u8 pad_0xcc3[0x01];
+ u8 uart2ctl; /* UART 2 general control */
+ u8 uart2sta; /* UART 2 general status */
+ u8 uart2fcrshad; /* UART 2 FIFO control shadow */
+
+ u8 pad_0xcc7[0x09];
+
+ u8 ssictl; /* SSI control */
+ u8 ssixmit; /* SSI transmit */
+ u8 ssicmd; /* SSI command */
+ u8 ssista; /* SSI status */
+ u8 ssircv; /* SSI receive */
+
+ u8 pad_0xcd5[0x2b];
+
+ u8 picicr; /* interrupt control */
+ u8 pad_0xd01[0x01];
+ u8 pic_mode[3]; /* PIC interrupt mode */
+ u8 pad_0xd05[0x03];
+ u16 swint16_1; /* software interrupt 16-1 control */
+ u8 swint22_17; /* software interrupt 22-17/NMI control */
+ u8 pad_0xd0b[0x05];
+ u16 intpinpol; /* interrupt pin polarity */
+ u8 pad_0xd12[0x02];
+ u16 pcihostmap; /* PCI host bridge interrupt mapping */
+ u8 pad_0xd16[0x02];
+ u16 eccmap; /* ECC interrupt mapping */
+ u8 gp_tmr_int_map[3]; /* GP timer interrupt mapping */
+ u8 pad_0xd1d[0x03];
+ u8 pit_int_map[3]; /* PIT interrupt mapping */
+ u8 pad_0xd23[0x05];
+ u8 uart_int_map[2]; /* UART interrupt mapping */
+ u8 pad_0xd2a[0x06];
+ u8 pci_int_map[4]; /* PCI interrupt mapping (A through D)*/
+ u8 pad_0xd34[0x0c];
+ u8 dmabcintmap; /* DMA buffer chaining interrupt mapping */
+ u8 ssimap; /* SSI interrupt mapping register */
+ u8 wdtmap; /* watchdog timer interrupt mapping */
+ u8 rtcmap; /* RTC interrupt mapping register */
+ u8 wpvmap; /* write-protect interrupt mapping */
+ u8 icemap; /* AMDebug JTAG Rx/Tx interrupt mapping */
+ u8 ferrmap; /* floating point error interrupt mapping */
+ u8 pad_0xd47[0x09];
+ u8 gp_int_map[11]; /* GP IRQ interrupt mapping */
+
+ u8 pad_0xd5b[0x15];
+
+ u8 sysinfo; /* system board information */
+ u8 pad_0xd71[0x01];
+ u8 rescfg; /* reset configuration */
+ u8 pad_0xd73[0x01];
+ u8 ressta; /* reset status */
+
+ u8 pad_0xd75[0x0b];
+
+ u8 gpdmactl; /* GP-DMA Control */
+ u8 gpdmammio; /* GP-DMA memory-mapped I/O */
+ u16 gpdmaextchmapa; /* GP-DMA resource channel map a */
+ u16 gpdmaextchmapb; /* GP-DMA resource channel map b */
+ u8 gp_dma_ext_pg_0; /* GP-DMA channel extended page 0 */
+ u8 gp_dma_ext_pg_1; /* GP-DMA channel extended page 0 */
+ u8 gp_dma_ext_pg_2; /* GP-DMA channel extended page 0 */
+ u8 gp_dma_ext_pg_3; /* GP-DMA channel extended page 0 */
+ u8 gp_dma_ext_pg_5; /* GP-DMA channel extended page 0 */
+ u8 gp_dma_ext_pg_6; /* GP-DMA channel extended page 0 */
+ u8 gp_dma_ext_pg_7; /* GP-DMA channel extended page 0 */
+ u8 pad_0xd8d[0x03];
+ u8 gpdmaexttc3; /* GP-DMA channel 3 extender transfer count */
+ u8 gpdmaexttc5; /* GP-DMA channel 5 extender transfer count */
+ u8 gpdmaexttc6; /* GP-DMA channel 6 extender transfer count */
+ u8 gpdmaexttc7; /* GP-DMA channel 7 extender transfer count */
+ u8 pad_0xd94[0x4];
+ u8 gpdmabcctl; /* buffer chaining control */
+ u8 gpdmabcsta; /* buffer chaining status */
+ u8 gpdmabsintenb; /* buffer chaining interrupt enable */
+ u8 gpdmabcval; /* buffer chaining valid */
+ u8 pad_0xd9c[0x04];
+ u16 gpdmanxtaddl3; /* GP-DMA channel 3 next address low */
+ u16 gpdmanxtaddh3; /* GP-DMA channel 3 next address high */
+ u16 gpdmanxtaddl5; /* GP-DMA channel 5 next address low */
+ u16 gpdmanxtaddh5; /* GP-DMA channel 5 next address high */
+ u16 gpdmanxtaddl6; /* GP-DMA channel 6 next address low */
+ u16 gpdmanxtaddh6; /* GP-DMA channel 6 next address high */
+ u16 gpdmanxtaddl7; /* GP-DMA channel 7 next address low */
+ u16 gpdmanxtaddh7; /* GP-DMA channel 7 next address high */
+ u16 gpdmanxttcl3; /* GP-DMA channel 3 next transfer count low */
+ u16 gpdmanxttch3; /* GP-DMA channel 3 next transfer count high */
+ u16 gpdmanxttcl5; /* GP-DMA channel 5 next transfer count low */
+ u16 gpdmanxttch5; /* GP-DMA channel 5 next transfer count high */
+ u16 gpdmanxttcl6; /* GP-DMA channel 6 next transfer count low */
+ u16 gpdmanxttch6; /* GP-DMA channel 6 next transfer count high */
+ u16 gpdmanxttcl7; /* GP-DMA channel 7 next transfer count low */
+ u16 gpdmanxttch7; /* GP-DMA channel 7 next transfer count high */
+
+ u8 pad_0xdc0[0x0240];
+} sc520_mmcr_t;
+
+extern sc520_mmcr_t *sc520_mmcr;
+
+#endif
+
+/* Memory Mapped Control Registers (MMCR) Base Address */
+#define SC520_MMCR_BASE 0xfffef000
+
+/* MMCR Addresses (required for assembler code) */
+#define SC520_DRCCTL (SC520_MMCR_BASE + 0x010)
+#define SC520_DRCTMCTL (SC520_MMCR_BASE + 0x012)
+#define SC520_DRCCFG (SC520_MMCR_BASE + 0x014)
+#define SC520_DRCBENDADR (SC520_MMCR_BASE + 0x018)
+#define SC520_ECCCTL (SC520_MMCR_BASE + 0x020)
+#define SC520_DBCTL (SC520_MMCR_BASE + 0x040)
+#define SC520_ECCINT (SC520_MMCR_BASE + 0xd18)
+
+#define SC520_PAR0 (SC520_MMCR_BASE + 0x088)
+#define SC520_PAR1 (SC520_PAR0 + (0x04 * 1))
+#define SC520_PAR2 (SC520_PAR0 + (0x04 * 2))
+#define SC520_PAR3 (SC520_PAR0 + (0x04 * 3))
+#define SC520_PAR4 (SC520_PAR0 + (0x04 * 4))
+#define SC520_PAR5 (SC520_PAR0 + (0x04 * 5))
+#define SC520_PAR6 (SC520_PAR0 + (0x04 * 6))
+#define SC520_PAR7 (SC520_PAR0 + (0x04 * 7))
+#define SC520_PAR8 (SC520_PAR0 + (0x04 * 8))
+#define SC520_PAR9 (SC520_PAR0 + (0x04 * 9))
+#define SC520_PAR10 (SC520_PAR0 + (0x04 * 10))
+#define SC520_PAR11 (SC520_PAR0 + (0x04 * 11))
+#define SC520_PAR12 (SC520_PAR0 + (0x04 * 12))
+#define SC520_PAR13 (SC520_PAR0 + (0x04 * 13))
+#define SC520_PAR14 (SC520_PAR0 + (0x04 * 14))
+#define SC520_PAR15 (SC520_PAR0 + (0x04 * 15))
+
+/*
+ * PARs for maximum allowable 256MB of SDRAM @ 0x00000000
+ * Two PARs are required due to maximum PAR size of 128MB
+ * These are used in the SDRAM sizing code to disable caching
+ *
+ * 111 0 0 0 1 11111111111 00000000000000 }- 0xe3ffc000
+ * 111 0 0 0 1 11111111111 00100000000000 }- 0xe3ffc800
+ * \ / | | | | \----+----/ \-----+------/
+ * | | | | | | +---------- Start at 0x00000000
+ * | | | | | | 0x08000000
+ * | | | | | +----------------------- 128MB Region Size
+ * | | | | | ((2047 + 1) * 64kB)
+ * | | | | +------------------------------ 64kB Page Size
+ * | | | +-------------------------------- Writes Enabled
+ * | | +---------------------------------- Caching Enabled
+ * | +------------------------------------ Execution Enabled
+ * +--------------------------------------- SDRAM
+ */
+#define SC520_SDRAM1_PAR 0xe3ffc000
+#define SC520_SDRAM2_PAR 0xe3ffc800
+
+#define SC520_PAR_WRITE_DIS 0x04000000
+#define SC520_PAR_CACHE_DIS 0x08000000
+#define SC520_PAR_EXEC_DIS 0x10000000
+
+/*
+ * Programmable Address Regions to cover 256MB SDRAM (Maximum supported)
+ * required for DRAM sizing code
+ */
+
+/* MMCR Register bits (not all of them :) ) */
+
+/* SSI Stuff */
+#define CTL_CLK_SEL_4 0x00 /* Nominal Bit Rate = 8 MHz */
+#define CTL_CLK_SEL_8 0x10 /* Nominal Bit Rate = 4 MHz */
+#define CTL_CLK_SEL_16 0x20 /* Nominal Bit Rate = 2 MHz */
+#define CTL_CLK_SEL_32 0x30 /* Nominal Bit Rate = 1 MHz */
+#define CTL_CLK_SEL_64 0x40 /* Nominal Bit Rate = 512 KHz */
+#define CTL_CLK_SEL_128 0x50 /* Nominal Bit Rate = 256 KHz */
+#define CTL_CLK_SEL_256 0x60 /* Nominal Bit Rate = 128 KHz */
+#define CTL_CLK_SEL_512 0x70 /* Nominal Bit Rate = 64 KHz */
+
+#define TC_INT_ENB 0x08 /* Transaction Complete Interrupt Enable */
+#define PHS_INV_ENB 0x04 /* SSI Inverted Phase Mode Enable */
+#define CLK_INV_ENB 0x02 /* SSI Inverted Clock Mode Enable */
+#define MSBF_ENB 0x01 /* SSI Most Significant Bit First Mode Enable */
+
+#define SSICMD_CMD_SEL_XMITRCV 0x03 /* Simultaneous Transmit / Receive Transaction */
+#define SSICMD_CMD_SEL_RCV 0x02 /* Receive Transaction */
+#define SSICMD_CMD_SEL_XMIT 0x01 /* Transmit Transaction */
+#define SSISTA_BSY 0x02 /* SSI Busy */
+#define SSISTA_TC_INT 0x01 /* SSI Transaction Complete Interrupt */
+
+/* BITS for SC520_ADDDECCTL: */
+#define WPV_INT_ENB 0x80 /* Write-Protect Violation Interrupt Enable */
+#define IO_HOLE_DEST_PCI 0x10 /* I/O Hole Access Destination */
+#define RTC_DIS 0x04 /* RTC Disable */
+#define UART2_DIS 0x02 /* UART2 Disable */
+#define UART1_DIS 0x01 /* UART1 Disable */
+
+/*
+ * Defines used for SDRAM Sizing (number of columns and rows)
+ * Refer to section 10.6.4 - SDRAM Sizing Algorithm in the
+ * Elan SC520 Microcontroller User's Manual (Order #22004B)
+ */
+#define CACHELINESZ 0x00000010
+
+#define COL11_ADR 0x0e001e00
+#define COL10_ADR 0x0e000e00
+#define COL09_ADR 0x0e000600
+#define COL08_ADR 0x0e000200
+#define COL11_DATA 0x0b0b0b0b
+#define COL10_DATA 0x0a0a0a0a
+#define COL09_DATA 0x09090909
+#define COL08_DATA 0x08080808
+
+#define ROW14_ADR 0x0f000000
+#define ROW13_ADR 0x07000000
+#define ROW12_ADR 0x03000000
+#define ROW11_ADR 0x01000000
+#define ROW10_ADR 0x00000000
+#define ROW14_DATA 0x3f3f3f3f
+#define ROW13_DATA 0x1f1f1f1f
+#define ROW12_DATA 0x0f0f0f0f
+#define ROW11_DATA 0x07070707
+#define ROW10_DATA 0xaaaaaaaa
+
+/* 0x28000000 - 0x3fffffff is used by the flash banks */
+
+/* 0x40000000 - 0xffffffff is not adressable by the SC520 */
+
+/* priority numbers used for interrupt channel mappings */
+#define SC520_IRQ_DISABLED 0
+#define SC520_IRQ0 1
+#define SC520_IRQ1 2
+#define SC520_IRQ2 4 /* same as IRQ9 */
+#define SC520_IRQ3 11
+#define SC520_IRQ4 12
+#define SC520_IRQ5 13
+#define SC520_IRQ6 21
+#define SC520_IRQ7 22
+#define SC520_IRQ8 3
+#define SC520_IRQ9 4
+#define SC520_IRQ10 5
+#define SC520_IRQ11 6
+#define SC520_IRQ12 7
+#define SC520_IRQ13 8
+#define SC520_IRQ14 9
+#define SC520_IRQ15 10
+
+#endif
diff --git a/arch/x86/include/asm/ic/ssi.h b/arch/x86/include/asm/ic/ssi.h
new file mode 100644
index 0000000..bd48eab
--- /dev/null
+++ b/arch/x86/include/asm/ic/ssi.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2008
+ * Graeme Russ <graeme.russ@gmail.com>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_IC_SSI_H_
+#define _ASM_IC_SSI_H_ 1
+
+int ssi_set_interface(int, int, int, int);
+void ssi_chip_select(int);
+u8 ssi_txrx_byte(u8);
+void ssi_tx_byte(u8);
+u8 ssi_rx_byte(void);
+
+
+#endif
diff --git a/arch/x86/include/asm/interrupt.h b/arch/x86/include/asm/interrupt.h
new file mode 100644
index 0000000..be52fe4
--- /dev/null
+++ b/arch/x86/include/asm/interrupt.h
@@ -0,0 +1,46 @@
+/*
+ * (C) Copyright 2009
+ * Graeme Russ, graeme.russ@gmail.com
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_INTERRUPT_H_
+#define __ASM_INTERRUPT_H_ 1
+
+#include <asm/types.h>
+
+/* arch/x86/cpu/interrupts.c */
+void set_vector(u8 intnum, void *routine);
+
+/* arch/x86/lib/interupts.c */
+void disable_irq(int irq);
+void enable_irq(int irq);
+
+/* Architecture specific functions */
+void mask_irq(int irq);
+void unmask_irq(int irq);
+void specific_eoi(int irq);
+
+extern char exception_stack[];
+
+#endif
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
new file mode 100644
index 0000000..9b757d4
--- /dev/null
+++ b/arch/x86/include/asm/io.h
@@ -0,0 +1,237 @@
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ * Linus
+ */
+
+ /*
+ * Bit simplified and optimized by Jan Hubicka
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+ *
+ * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+ * isa_read[wl] and isa_write[wl] fixed
+ * - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ */
+
+#define IO_SPACE_LIMIT 0xffff
+
+
+#ifdef __KERNEL__
+
+
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ */
+
+#define readb(addr) (*(volatile unsigned char *) (addr))
+#define readw(addr) (*(volatile unsigned short *) (addr))
+#define readl(addr) (*(volatile unsigned int *) (addr))
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+
+#define writeb(b,addr) (*(volatile unsigned char *) (addr) = (b))
+#define writew(b,addr) (*(volatile unsigned short *) (addr) = (b))
+#define writel(b,addr) (*(volatile unsigned int *) (addr) = (b))
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+#define memset_io(a,b,c) memset((a),(b),(c))
+#define memcpy_fromio(a,b,c) memcpy((a),(b),(c))
+#define memcpy_toio(a,b,c) memcpy((a),(b),(c))
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define isa_readb(a) readb((a))
+#define isa_readw(a) readw((a))
+#define isa_readl(a) readl((a))
+#define isa_writeb(b,a) writeb(b,(a))
+#define isa_writew(w,a) writew(w,(a))
+#define isa_writel(l,a) writel(l,(a))
+#define isa_memset_io(a,b,c) memset_io((a),(b),(c))
+#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),(b),(c))
+#define isa_memcpy_toio(a,b,c) memcpy_toio((a),(b),(c))
+
+
+static inline int check_signature(unsigned long io_addr,
+ const unsigned char *signature, int length)
+{
+ int retval = 0;
+ do {
+ if (readb(io_addr) != *signature)
+ goto out;
+ io_addr++;
+ signature++;
+ length--;
+ } while (length);
+ retval = 1;
+out:
+ return retval;
+}
+
+/**
+ * isa_check_signature - find BIOS signatures
+ * @io_addr: mmio address to check
+ * @signature: signature block
+ * @length: length of signature
+ *
+ * Perform a signature comparison with the ISA mmio address io_addr.
+ * Returns 1 on a match.
+ *
+ * This function is deprecated. New drivers should use ioremap and
+ * check_signature.
+ */
+
+
+static inline int isa_check_signature(unsigned long io_addr,
+ const unsigned char *signature, int length)
+{
+ int retval = 0;
+ do {
+ if (isa_readb(io_addr) != *signature)
+ goto out;
+ io_addr++;
+ signature++;
+ length--;
+ } while (length);
+ retval = 1;
+out:
+ return retval;
+}
+
+#endif /* __KERNEL__ */
+
+#ifdef SLOW_IO_BY_JUMPING
+#define __SLOW_DOWN_IO "\njmp 1f\n1:\tjmp 1f\n1:"
+#else
+#define __SLOW_DOWN_IO "\noutb %%al,$0x80"
+#endif
+
+#ifdef REALLY_SLOW_IO
+#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
+#else
+#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO
+#endif
+
+
+/*
+ * Talk about misusing macros..
+ */
+#define __OUT1(s,x) \
+static inline void out##s(unsigned x value, unsigned short port) {
+
+#define __OUT2(s,s1,s2) \
+__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
+
+
+#define __OUT(s,s1,x) \
+__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \
+__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));}
+
+#define __IN1(s) \
+static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
+
+#define __IN2(s,s1,s2) \
+__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
+
+#define __IN(s,s1,i...) \
+__IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
+__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; }
+
+#define __INS(s) \
+static inline void ins##s(unsigned short port, void * addr, unsigned long count) \
+{ __asm__ __volatile__ ("rep ; ins" #s \
+: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
+
+#define __OUTS(s) \
+static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
+{ __asm__ __volatile__ ("rep ; outs" #s \
+: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
+
+#define RETURN_TYPE unsigned char
+__IN(b,"")
+#undef RETURN_TYPE
+#define RETURN_TYPE unsigned short
+__IN(w,"")
+#undef RETURN_TYPE
+#define RETURN_TYPE unsigned int
+__IN(l,"")
+#undef RETURN_TYPE
+
+__OUT(b,"b",char)
+__OUT(w,"w",short)
+__OUT(l,,int)
+
+__INS(b)
+__INS(w)
+__INS(l)
+
+__OUTS(b)
+__OUTS(w)
+__OUTS(l)
+
+static inline void sync(void)
+{
+}
+
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *
+map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+ return (phys_addr_t)(vaddr);
+}
+
+#endif
diff --git a/arch/x86/include/asm/ioctl.h b/arch/x86/include/asm/ioctl.h
new file mode 100644
index 0000000..b279fe0
--- /dev/null
+++ b/arch/x86/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/x86/include/asm/ist.h b/arch/x86/include/asm/ist.h
new file mode 100644
index 0000000..7e5dff1
--- /dev/null
+++ b/arch/x86/include/asm/ist.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_X86_IST_H
+#define _ASM_X86_IST_H
+
+/*
+ * Include file for the interface to IST BIOS
+ * Copyright 2002 Andy Grover <andrew.grover@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+
+#include <linux/types.h>
+
+struct ist_info {
+ __u32 signature;
+ __u32 command;
+ __u32 event;
+ __u32 perf_level;
+};
+
+#ifdef __KERNEL__
+
+extern struct ist_info ist_info;
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_X86_IST_H */
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
new file mode 100644
index 0000000..050a2bb
--- /dev/null
+++ b/arch/x86/include/asm/pci.h
@@ -0,0 +1,34 @@
+
+
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PCI_I386_H_
+#define _PCI_I386_H_ 1
+
+void pci_setup_type1(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
+int pci_enable_legacy_video_ports(struct pci_controller* hose);
+int pci_shadow_rom(pci_dev_t dev, unsigned char *dest);
+void pci_remove_rom_window(struct pci_controller* hose, u32 addr);
+u32 pci_get_rom_window(struct pci_controller* hose, int size);
+#endif
diff --git a/arch/x86/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h
new file mode 100644
index 0000000..5529f32
--- /dev/null
+++ b/arch/x86/include/asm/posix_types.h
@@ -0,0 +1,80 @@
+#ifndef __ARCH_I386_POSIX_TYPES_H
+#define __ARCH_I386_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short __kernel_dev_t;
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+#define __FD_SET(fd,fdsetp) \
+ __asm__ __volatile__("btsl %1,%0": \
+ "=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
+
+#undef __FD_CLR
+#define __FD_CLR(fd,fdsetp) \
+ __asm__ __volatile__("btrl %1,%0": \
+ "=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
+
+#undef __FD_ISSET
+#define __FD_ISSET(fd,fdsetp) (__extension__ ({ \
+ unsigned char __result; \
+ __asm__ __volatile__("btl %1,%2 ; setb %0" \
+ :"=q" (__result) :"r" ((int) (fd)), \
+ "m" (*(__kernel_fd_set *) (fdsetp))); \
+ __result; }))
+
+#undef __FD_ZERO
+#define __FD_ZERO(fdsetp) \
+do { \
+ int __d0, __d1; \
+ __asm__ __volatile__("cld ; rep ; stosl" \
+ :"=m" (*(__kernel_fd_set *) (fdsetp)), \
+ "=&c" (__d0), "=&D" (__d1) \
+ :"a" (0), "1" (__FDSET_LONGS), \
+ "2" ((__kernel_fd_set *) (fdsetp)) : "memory"); \
+} while (0)
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif
diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
new file mode 100644
index 0000000..7a3e836
--- /dev/null
+++ b/arch/x86/include/asm/processor-flags.h
@@ -0,0 +1,100 @@
+#ifndef _ASM_X86_PROCESSOR_FLAGS_H
+#define _ASM_X86_PROCESSOR_FLAGS_H
+/* Various flags defined: can be included from assembler. */
+
+/*
+ * EFLAGS bits
+ */
+#define X86_EFLAGS_CF 0x00000001 /* Carry Flag */
+#define X86_EFLAGS_PF 0x00000004 /* Parity Flag */
+#define X86_EFLAGS_AF 0x00000010 /* Auxillary carry Flag */
+#define X86_EFLAGS_ZF 0x00000040 /* Zero Flag */
+#define X86_EFLAGS_SF 0x00000080 /* Sign Flag */
+#define X86_EFLAGS_TF 0x00000100 /* Trap Flag */
+#define X86_EFLAGS_IF 0x00000200 /* Interrupt Flag */
+#define X86_EFLAGS_DF 0x00000400 /* Direction Flag */
+#define X86_EFLAGS_OF 0x00000800 /* Overflow Flag */
+#define X86_EFLAGS_IOPL 0x00003000 /* IOPL mask */
+#define X86_EFLAGS_NT 0x00004000 /* Nested Task */
+#define X86_EFLAGS_RF 0x00010000 /* Resume Flag */
+#define X86_EFLAGS_VM 0x00020000 /* Virtual Mode */
+#define X86_EFLAGS_AC 0x00040000 /* Alignment Check */
+#define X86_EFLAGS_VIF 0x00080000 /* Virtual Interrupt Flag */
+#define X86_EFLAGS_VIP 0x00100000 /* Virtual Interrupt Pending */
+#define X86_EFLAGS_ID 0x00200000 /* CPUID detection flag */
+
+/*
+ * Basic CPU control in CR0
+ */
+#define X86_CR0_PE 0x00000001 /* Protection Enable */
+#define X86_CR0_MP 0x00000002 /* Monitor Coprocessor */
+#define X86_CR0_EM 0x00000004 /* Emulation */
+#define X86_CR0_TS 0x00000008 /* Task Switched */
+#define X86_CR0_ET 0x00000010 /* Extension Type */
+#define X86_CR0_NE 0x00000020 /* Numeric Error */
+#define X86_CR0_WP 0x00010000 /* Write Protect */
+#define X86_CR0_AM 0x00040000 /* Alignment Mask */
+#define X86_CR0_NW 0x20000000 /* Not Write-through */
+#define X86_CR0_CD 0x40000000 /* Cache Disable */
+#define X86_CR0_PG 0x80000000 /* Paging */
+
+/*
+ * Paging options in CR3
+ */
+#define X86_CR3_PWT 0x00000008 /* Page Write Through */
+#define X86_CR3_PCD 0x00000010 /* Page Cache Disable */
+
+/*
+ * Intel CPU features in CR4
+ */
+#define X86_CR4_VME 0x00000001 /* enable vm86 extensions */
+#define X86_CR4_PVI 0x00000002 /* virtual interrupts flag enable */
+#define X86_CR4_TSD 0x00000004 /* disable time stamp at ipl 3 */
+#define X86_CR4_DE 0x00000008 /* enable debugging extensions */
+#define X86_CR4_PSE 0x00000010 /* enable page size extensions */
+#define X86_CR4_PAE 0x00000020 /* enable physical address extensions */
+#define X86_CR4_MCE 0x00000040 /* Machine check enable */
+#define X86_CR4_PGE 0x00000080 /* enable global pages */
+#define X86_CR4_PCE 0x00000100 /* enable performance counters at ipl 3 */
+#define X86_CR4_OSFXSR 0x00000200 /* enable fast FPU save and restore */
+#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
+#define X86_CR4_VMXE 0x00002000 /* enable VMX virtualization */
+#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
+
+/*
+ * x86-64 Task Priority Register, CR8
+ */
+#define X86_CR8_TPR 0x0000000F /* task priority register */
+
+/*
+ * AMD and Transmeta use MSRs for configuration; see <asm/msr-index.h>
+ */
+
+/*
+ * NSC/Cyrix CPU configuration register indexes
+ */
+#define CX86_PCR0 0x20
+#define CX86_GCR 0xb8
+#define CX86_CCR0 0xc0
+#define CX86_CCR1 0xc1
+#define CX86_CCR2 0xc2
+#define CX86_CCR3 0xc3
+#define CX86_CCR4 0xe8
+#define CX86_CCR5 0xe9
+#define CX86_CCR6 0xea
+#define CX86_CCR7 0xeb
+#define CX86_PCR1 0xf0
+#define CX86_DIR0 0xfe
+#define CX86_DIR1 0xff
+#define CX86_ARR_BASE 0xc4
+#define CX86_RCR_BASE 0xdc
+
+#ifdef __KERNEL__
+#ifdef CONFIG_VM86
+#define X86_VM_MASK X86_EFLAGS_VM
+#else
+#define X86_VM_MASK 0 /* No VM86 support */
+#endif
+#endif
+
+#endif /* _ASM_X86_PROCESSOR_FLAGS_H */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
new file mode 100644
index 0000000..22a1298
--- /dev/null
+++ b/arch/x86/include/asm/processor.h
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_PROCESSOR_H_
+#define __ASM_PROCESSOR_H_ 1
+
+#define GDT_ENTRY_32BIT_CS 2
+#define GDT_ENTRY_32BIT_DS (GDT_ENTRY_32BIT_CS + 1)
+#define GDT_ENTRY_16BIT_CS (GDT_ENTRY_32BIT_DS + 1)
+#define GDT_ENTRY_16BIT_DS (GDT_ENTRY_16BIT_CS + 1)
+
+#endif
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
new file mode 100644
index 0000000..a727dbf
--- /dev/null
+++ b/arch/x86/include/asm/ptrace.h
@@ -0,0 +1,90 @@
+#ifndef _I386_PTRACE_H
+#define _I386_PTRACE_H
+
+#include <asm/types.h>
+
+#define EBX 0
+#define ECX 1
+#define EDX 2
+#define ESI 3
+#define EDI 4
+#define EBP 5
+#define EAX 6
+#define DS 7
+#define ES 8
+#define FS 9
+#define GS 10
+#define ORIG_EAX 11
+#define EIP 12
+#define CS 13
+#define EFL 14
+#define UESP 15
+#define SS 16
+#define FRAME_SIZE 17
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long ebx;
+ long ecx;
+ long edx;
+ long esi;
+ long edi;
+ long ebp;
+ long eax;
+ int xds;
+ int xes;
+ int xfs;
+ int xgs;
+ long orig_eax;
+ long eip;
+ int xcs;
+ long eflags;
+ long esp;
+ int xss;
+} __attribute__ ((packed));
+
+struct irq_regs {
+ /* Pushed by irq_common_entry */
+ long ebx;
+ long ecx;
+ long edx;
+ long esi;
+ long edi;
+ long ebp;
+ long esp;
+ long eax;
+ long xds;
+ long xes;
+ long xfs;
+ long xgs;
+ long xss;
+ /* Pushed by vector handler (irq_<num>) */
+ long irq_id;
+ /* Pushed by cpu in response to interrupt */
+ long eip;
+ long xcs;
+ long eflags;
+} __attribute__ ((packed));
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+#define PTRACE_GETFPXREGS 18
+#define PTRACE_SETFPXREGS 19
+
+#define PTRACE_SETOPTIONS 21
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD 0x00000001
+
+#ifdef __KERNEL__
+#define user_mode(regs) ((VM_MASK & (regs)->eflags) || (3 & (regs)->xcs))
+#define instruction_pointer(regs) ((regs)->eip)
+extern void show_regs(struct pt_regs *);
+#endif
+
+#endif
diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
new file mode 100644
index 0000000..9177e4e
--- /dev/null
+++ b/arch/x86/include/asm/realmode.h
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_REALMODE_H_
+#define __ASM_REALMODE_H_
+#include <asm/ptrace.h>
+
+int bios_setup(void);
+int enter_realmode(u16 seg, u16 off, struct pt_regs *in, struct pt_regs *out);
+int enter_realmode_int(u8 lvl, struct pt_regs *in, struct pt_regs *out);
+
+#endif
diff --git a/arch/x86/include/asm/string.h b/arch/x86/include/asm/string.h
new file mode 100644
index 0000000..3643a79
--- /dev/null
+++ b/arch/x86/include/asm/string.h
@@ -0,0 +1,32 @@
+#ifndef __ASM_I386_STRING_H
+#define __ASM_I386_STRING_H
+
+/*
+ * We don't do inline string functions, since the
+ * optimised inline asm versions are not small.
+ */
+#undef __HAVE_ARCH_STRNCPY
+extern char *strncpy(char *__dest, __const__ char *__src, __kernel_size_t __n);
+
+#undef __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char * s, int c);
+
+#undef __HAVE_ARCH_STRCHR
+extern char * strchr(const char * s, int c);
+
+#undef __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMSET
+extern void * memset(void *, int, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMZERO
+extern void memzero(void *ptr, __kernel_size_t n);
+
+#endif
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
new file mode 100644
index 0000000..9a40e38
--- /dev/null
+++ b/arch/x86/include/asm/types.h
@@ -0,0 +1,53 @@
+#ifndef __ASM_I386_TYPES_H
+#define __ASM_I386_TYPES_H
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__)
+__extension__ typedef __signed__ long long __s64;
+__extension__ typedef unsigned long long __u64;
+#endif
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define BITS_PER_LONG 32
+
+/* Dma addresses are 32-bits wide. */
+
+typedef u32 dma_addr_t;
+
+typedef unsigned long phys_addr_t;
+typedef unsigned long phys_size_t;
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
new file mode 100644
index 0000000..944e1a2
--- /dev/null
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _U_BOOT_I386_H_
+#define _U_BOOT_I386_H_ 1
+
+/* cpu/.../cpu.c */
+int x86_cpu_init_r(void);
+int cpu_init_r(void);
+int x86_cpu_init_f(void);
+int cpu_init_f(void);
+
+/* cpu/.../timer.c */
+void timer_isr(void *);
+typedef void (timer_fnc_t) (void);
+int register_timer_isr (timer_fnc_t *isr_func);
+
+/* Architecture specific - can be in arch/x86/cpu/, arch/x86/lib/, or $(BOARD)/ */
+int timer_init(void);
+int dram_init_f(void);
+
+/* cpu/.../interrupts.c */
+int cpu_init_interrupts(void);
+
+/* board/.../... */
+int board_init(void);
+int dram_init(void);
+
+void setup_pcat_compatibility(void);
+
+void isa_unmap_rom(u32 addr);
+u32 isa_map_rom(u32 bus_addr, int size);
+
+/* arch/x86/lib/... */
+int video_bios_init(void);
+int video_init(void);
+
+
+#endif /* _U_BOOT_I386_H_ */
diff --git a/arch/x86/include/asm/u-boot.h b/arch/x86/include/asm/u-boot.h
new file mode 100644
index 0000000..a43b3aa
--- /dev/null
+++ b/arch/x86/include/asm/u-boot.h
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************
+ * NOTE: This header file defines an interface to U-Boot. Including
+ * this (unmodified) header file in another file is considered normal
+ * use of U-Boot, and does *not* fall under the heading of "derived
+ * work".
+ ********************************************************************
+ */
+
+#ifndef _U_BOOT_H_
+#define _U_BOOT_H_ 1
+
+typedef struct bd_info {
+ unsigned long bi_memstart; /* start of DRAM memory */
+ phys_size_t bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
+ unsigned long bi_sramstart; /* start of SRAM memory */
+ unsigned long bi_sramsize; /* size of SRAM memory */
+ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
+ unsigned long bi_intfreq; /* Internal Freq, in MHz */
+ unsigned long bi_busfreq; /* Bus Freq, in MHz */
+ unsigned int bi_baudrate; /* Console Baudrate */
+ unsigned long bi_boot_params; /* where this board expects params */
+ struct /* RAM configuration */
+ {
+ ulong start;
+ ulong size;
+ }bi_dram[CONFIG_NR_DRAM_BANKS];
+} bd_t;
+
+#endif /* _U_BOOT_H_ */
diff --git a/arch/x86/include/asm/unaligned.h b/arch/x86/include/asm/unaligned.h
new file mode 100644
index 0000000..6cecbbb
--- /dev/null
+++ b/arch/x86/include/asm/unaligned.h
@@ -0,0 +1 @@
+#include <asm-generic/unaligned.h>
diff --git a/arch/x86/include/asm/video/edid.h b/arch/x86/include/asm/video/edid.h
new file mode 100644
index 0000000..928c342
--- /dev/null
+++ b/arch/x86/include/asm/video/edid.h
@@ -0,0 +1,16 @@
+#ifndef __linux_video_edid_h__
+#define __linux_video_edid_h__
+
+#if !defined(__KERNEL__) || defined(CONFIG_X86)
+
+struct edid_info {
+ unsigned char dummy[128];
+};
+
+#ifdef __KERNEL__
+extern struct edid_info edid_info;
+#endif /* __KERNEL__ */
+
+#endif
+
+#endif /* __linux_video_edid_h__ */
diff --git a/arch/x86/include/asm/zimage.h b/arch/x86/include/asm/zimage.h
new file mode 100644
index 0000000..b6266e4
--- /dev/null
+++ b/arch/x86/include/asm/zimage.h
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_ZIMAGE_H_
+#define _ASM_ZIMAGE_H_
+
+/* linux i386 zImage/bzImage header. Offsets relative to
+ * the start of the image */
+
+#define CMD_LINE_MAGIC_OFF 0x020 /* Magic 0xa33f if the offset below is valid */
+#define CMD_LINE_OFFSET_OFF 0x022 /* Offset to comandline */
+#define SETUP_SECTS_OFF 0x1F1 /* The size of the setup in sectors */
+#define ROOT_FLAGS_OFF 0x1F2 /* If set, the root is mounted readonly */
+#define VID_MODE_OFF 0x1FA /* Video mode control */
+#define ROOT_DEV_OFF 0x1FC /* Default root device number */
+#define BOOT_FLAG_OFF 0x1FE /* 0xAA55 magic number */
+#define HEADER_OFF 0x202 /* Magic signature "HdrS" */
+#define VERSION_OFF 0x206 /* Boot protocol version supported */
+#define REALMODE_SWTCH_OFF 0x208 /* Boot loader hook (see below) */
+#define START_SYS_OFF 0x20C /* Points to kernel version string */
+#define TYPE_OF_LOADER_OFF 0x210 /* Boot loader identifier */
+#define LOADFLAGS_OFF 0x211 /* Boot protocol option flags */
+#define SETUP_MOVE_SIZE_OFF 0x212 /* Move to high memory size (used with hooks) */
+#define CODE32_START_OFF 0x214 /* Boot loader hook (see below) */
+#define RAMDISK_IMAGE_OFF 0x218 /* initrd load address (set by boot loader) */
+#define RAMDISK_SIZE_OFF 0x21C /* initrd size (set by boot loader) */
+#define HEAP_END_PTR_OFF 0x224 /* Free memory after setup end */
+#define CMD_LINE_PTR_OFF 0x228 /* 32-bit pointer to the kernel command line */
+
+
+#define HEAP_FLAG 0x80
+#define BIG_KERNEL_FLAG 0x01
+
+/* magic numbers */
+#define KERNEL_MAGIC 0xaa55
+#define KERNEL_V2_MAGIC 0x53726448
+#define COMMAND_LINE_MAGIC 0xA33F
+
+/* limits */
+#define BZIMAGE_MAX_SIZE 15*1024*1024 /* 15MB */
+#define ZIMAGE_MAX_SIZE 512*1024 /* 512k */
+#define SETUP_MAX_SIZE 32768
+
+#define SETUP_START_OFFSET 0x200
+#define BZIMAGE_LOAD_ADDR 0x100000
+#define ZIMAGE_LOAD_ADDR 0x10000
+
+void *load_zimage(char *image, unsigned long kernel_size,
+ unsigned long initrd_addr, unsigned long initrd_size,
+ int auto_boot);
+
+void boot_zimage(void *setup_base);
+
+#endif