socfpga: Adding Clock Manager driver
Clock Manager driver will be called to reconfigure all the
clocks setting based on user input. The input are passed to
Preloader through handoff files
Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
CC: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
diff --git a/arch/arm/cpu/armv7/socfpga/clock_manager.c b/arch/arm/cpu/armv7/socfpga/clock_manager.c
new file mode 100644
index 0000000..23d697d
--- /dev/null
+++ b/arch/arm/cpu/armv7/socfpga/clock_manager.c
@@ -0,0 +1,361 @@
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock_manager.h>
+
+static const struct socfpga_clock_manager *clock_manager_base =
+ (void *)SOCFPGA_CLKMGR_ADDRESS;
+
+#define CLKMGR_BYPASS_ENABLE 1
+#define CLKMGR_BYPASS_DISABLE 0
+#define CLKMGR_STAT_IDLE 0
+#define CLKMGR_STAT_BUSY 1
+#define CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1 0
+#define CLKMGR_BYPASS_PERPLLSRC_SELECT_INPUT_MUX 1
+#define CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1 0
+#define CLKMGR_BYPASS_SDRPLLSRC_SELECT_INPUT_MUX 1
+
+#define CLEAR_BGP_EN_PWRDN \
+ (CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \
+ CLKMGR_MAINPLLGRP_VCO_EN_SET(0)| \
+ CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0))
+
+#define VCO_EN_BASE \
+ (CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \
+ CLKMGR_MAINPLLGRP_VCO_EN_SET(1)| \
+ CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0))
+
+static inline void cm_wait_for_lock(uint32_t mask)
+{
+ register uint32_t inter_val;
+ do {
+ inter_val = readl(&clock_manager_base->inter) & mask;
+ } while (inter_val != mask);
+}
+
+/* function to poll in the fsm busy bit */
+static inline void cm_wait_for_fsm(void)
+{
+ while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
+ ;
+}
+
+/*
+ * function to write the bypass register which requires a poll of the
+ * busy bit
+ */
+static inline void cm_write_bypass(uint32_t val)
+{
+ writel(val, &clock_manager_base->bypass);
+ cm_wait_for_fsm();
+}
+
+/* function to write the ctrl register which requires a poll of the busy bit */
+static inline void cm_write_ctrl(uint32_t val)
+{
+ writel(val, &clock_manager_base->ctrl);
+ cm_wait_for_fsm();
+}
+
+/* function to write a clock register that has phase information */
+static inline void cm_write_with_phase(uint32_t value,
+ uint32_t reg_address, uint32_t mask)
+{
+ /* poll until phase is zero */
+ while (readl(reg_address) & mask)
+ ;
+
+ writel(value, reg_address);
+
+ while (readl(reg_address) & mask)
+ ;
+}
+
+/*
+ * Setup clocks while making no assumptions about previous state of the clocks.
+ *
+ * Start by being paranoid and gate all sw managed clocks
+ * Put all plls in bypass
+ * Put all plls VCO registers back to reset value (bandgap power down).
+ * Put peripheral and main pll src to reset value to avoid glitch.
+ * Delay 5 us.
+ * Deassert bandgap power down and set numerator and denominator
+ * Start 7 us timer.
+ * set internal dividers
+ * Wait for 7 us timer.
+ * Enable plls
+ * Set external dividers while plls are locking
+ * Wait for pll lock
+ * Assert/deassert outreset all.
+ * Take all pll's out of bypass
+ * Clear safe mode
+ * set source main and peripheral clocks
+ * Ungate clocks
+ */
+
+void cm_basic_init(const cm_config_t *cfg)
+{
+ uint32_t start, timeout;
+
+ /* Start by being paranoid and gate all sw managed clocks */
+
+ /*
+ * We need to disable nandclk
+ * and then do another apb access before disabling
+ * gatting off the rest of the periperal clocks.
+ */
+ writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
+ readl(&clock_manager_base->per_pll_en),
+ &clock_manager_base->per_pll_en);
+
+ /* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
+ writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
+ &clock_manager_base->main_pll_en);
+
+ writel(0, &clock_manager_base->sdr_pll_en);
+
+ /* now we can gate off the rest of the peripheral clocks */
+ writel(0, &clock_manager_base->per_pll_en);
+
+ /* Put all plls in bypass */
+ cm_write_bypass(
+ CLKMGR_BYPASS_PERPLLSRC_SET(
+ CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) |
+ CLKMGR_BYPASS_SDRPLLSRC_SET(
+ CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) |
+ CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_ENABLE) |
+ CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_ENABLE) |
+ CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_ENABLE));
+
+ /*
+ * Put all plls VCO registers back to reset value.
+ * Some code might have messed with them.
+ */
+ writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE,
+ &clock_manager_base->main_pll_vco);
+ writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE,
+ &clock_manager_base->per_pll_vco);
+ writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE,
+ &clock_manager_base->sdr_pll_vco);
+
+ /*
+ * The clocks to the flash devices and the L4_MAIN clocks can
+ * glitch when coming out of safe mode if their source values
+ * are different from their reset value. So the trick it to
+ * put them back to their reset state, and change input
+ * after exiting safe mode but before ungating the clocks.
+ */
+ writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
+ &clock_manager_base->per_pll_src);
+ writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
+ &clock_manager_base->main_pll_l4src);
+
+ /* read back for the required 5 us delay. */
+ readl(&clock_manager_base->main_pll_vco);
+ readl(&clock_manager_base->per_pll_vco);
+ readl(&clock_manager_base->sdr_pll_vco);
+
+
+ /*
+ * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
+ * with numerator and denominator.
+ */
+ writel(cfg->main_vco_base | CLEAR_BGP_EN_PWRDN |
+ CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
+ &clock_manager_base->main_pll_vco);
+
+ writel(cfg->peri_vco_base | CLEAR_BGP_EN_PWRDN |
+ CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
+ &clock_manager_base->per_pll_vco);
+
+ writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) |
+ CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
+ cfg->sdram_vco_base | CLEAR_BGP_EN_PWRDN |
+ CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
+ &clock_manager_base->sdr_pll_vco);
+
+ /*
+ * Time starts here
+ * must wait 7 us from BGPWRDN_SET(0) to VCO_ENABLE_SET(1)
+ */
+ reset_timer();
+ start = get_timer(0);
+ /* timeout in unit of us as CONFIG_SYS_HZ = 1000*1000 */
+ timeout = 7;
+
+ /* main mpu */
+ writel(cfg->mpuclk, &clock_manager_base->main_pll_mpuclk);
+
+ /* main main clock */
+ writel(cfg->mainclk, &clock_manager_base->main_pll_mainclk);
+
+ /* main for dbg */
+ writel(cfg->dbgatclk, &clock_manager_base->main_pll_dbgatclk);
+
+ /* main for cfgs2fuser0clk */
+ writel(cfg->cfg2fuser0clk,
+ &clock_manager_base->main_pll_cfgs2fuser0clk);
+
+ /* Peri emac0 50 MHz default to RMII */
+ writel(cfg->emac0clk, &clock_manager_base->per_pll_emac0clk);
+
+ /* Peri emac1 50 MHz default to RMII */
+ writel(cfg->emac1clk, &clock_manager_base->per_pll_emac1clk);
+
+ /* Peri QSPI */
+ writel(cfg->mainqspiclk, &clock_manager_base->main_pll_mainqspiclk);
+
+ writel(cfg->perqspiclk, &clock_manager_base->per_pll_perqspiclk);
+
+ /* Peri pernandsdmmcclk */
+ writel(cfg->pernandsdmmcclk,
+ &clock_manager_base->per_pll_pernandsdmmcclk);
+
+ /* Peri perbaseclk */
+ writel(cfg->perbaseclk, &clock_manager_base->per_pll_perbaseclk);
+
+ /* Peri s2fuser1clk */
+ writel(cfg->s2fuser1clk, &clock_manager_base->per_pll_s2fuser1clk);
+
+ /* 7 us must have elapsed before we can enable the VCO */
+ while (get_timer(start) < timeout)
+ ;
+
+ /* Enable vco */
+ /* main pll vco */
+ writel(cfg->main_vco_base | VCO_EN_BASE,
+ &clock_manager_base->main_pll_vco);
+
+ /* periferal pll */
+ writel(cfg->peri_vco_base | VCO_EN_BASE,
+ &clock_manager_base->per_pll_vco);
+
+ /* sdram pll vco */
+ writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) |
+ CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
+ cfg->sdram_vco_base | VCO_EN_BASE,
+ &clock_manager_base->sdr_pll_vco);
+
+ /* L3 MP and L3 SP */
+ writel(cfg->maindiv, &clock_manager_base->main_pll_maindiv);
+
+ writel(cfg->dbgdiv, &clock_manager_base->main_pll_dbgdiv);
+
+ writel(cfg->tracediv, &clock_manager_base->main_pll_tracediv);
+
+ /* L4 MP, L4 SP, can0, and can1 */
+ writel(cfg->perdiv, &clock_manager_base->per_pll_div);
+
+ writel(cfg->gpiodiv, &clock_manager_base->per_pll_gpiodiv);
+
+#define LOCKED_MASK \
+ (CLKMGR_INTER_SDRPLLLOCKED_MASK | \
+ CLKMGR_INTER_PERPLLLOCKED_MASK | \
+ CLKMGR_INTER_MAINPLLLOCKED_MASK)
+
+ cm_wait_for_lock(LOCKED_MASK);
+
+ /* write the sdram clock counters before toggling outreset all */
+ writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
+ &clock_manager_base->sdr_pll_ddrdqsclk);
+
+ writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
+ &clock_manager_base->sdr_pll_ddr2xdqsclk);
+
+ writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
+ &clock_manager_base->sdr_pll_ddrdqclk);
+
+ writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
+ &clock_manager_base->sdr_pll_s2fuser2clk);
+
+ /*
+ * after locking, but before taking out of bypass
+ * assert/deassert outresetall
+ */
+ uint32_t mainvco = readl(&clock_manager_base->main_pll_vco);
+
+ /* assert main outresetall */
+ writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->main_pll_vco);
+
+ uint32_t periphvco = readl(&clock_manager_base->per_pll_vco);
+
+ /* assert pheriph outresetall */
+ writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->per_pll_vco);
+
+ /* assert sdram outresetall */
+ writel(cfg->sdram_vco_base | VCO_EN_BASE|
+ CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(1),
+ &clock_manager_base->sdr_pll_vco);
+
+ /* deassert main outresetall */
+ writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->main_pll_vco);
+
+ /* deassert pheriph outresetall */
+ writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->per_pll_vco);
+
+ /* deassert sdram outresetall */
+ writel(CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
+ cfg->sdram_vco_base | VCO_EN_BASE,
+ &clock_manager_base->sdr_pll_vco);
+
+ /*
+ * now that we've toggled outreset all, all the clocks
+ * are aligned nicely; so we can change any phase.
+ */
+ cm_write_with_phase(cfg->ddrdqsclk,
+ (uint32_t)&clock_manager_base->sdr_pll_ddrdqsclk,
+ CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
+
+ /* SDRAM DDR2XDQSCLK */
+ cm_write_with_phase(cfg->ddr2xdqsclk,
+ (uint32_t)&clock_manager_base->sdr_pll_ddr2xdqsclk,
+ CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
+
+ cm_write_with_phase(cfg->ddrdqclk,
+ (uint32_t)&clock_manager_base->sdr_pll_ddrdqclk,
+ CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
+
+ cm_write_with_phase(cfg->s2fuser2clk,
+ (uint32_t)&clock_manager_base->sdr_pll_s2fuser2clk,
+ CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
+
+ /* Take all three PLLs out of bypass when safe mode is cleared. */
+ cm_write_bypass(
+ CLKMGR_BYPASS_PERPLLSRC_SET(
+ CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) |
+ CLKMGR_BYPASS_SDRPLLSRC_SET(
+ CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) |
+ CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_DISABLE) |
+ CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_DISABLE) |
+ CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_DISABLE));
+
+ /* clear safe mode */
+ cm_write_ctrl(readl(&clock_manager_base->ctrl) |
+ CLKMGR_CTRL_SAFEMODE_SET(CLKMGR_CTRL_SAFEMODE_MASK));
+
+ /*
+ * now that safe mode is clear with clocks gated
+ * it safe to change the source mux for the flashes the the L4_MAIN
+ */
+ writel(cfg->persrc, &clock_manager_base->per_pll_src);
+ writel(cfg->l4src, &clock_manager_base->main_pll_l4src);
+
+ /* Now ungate non-hw-managed clocks */
+ writel(~0, &clock_manager_base->main_pll_en);
+ writel(~0, &clock_manager_base->per_pll_en);
+ writel(~0, &clock_manager_base->sdr_pll_en);
+}